The Effect of Feed and Gonadotrophin Hormone on The Litter Size and Birth Weight of Local Goat

A study was conducted to determine the effect of ration and gonadotrophin hormone on the reproductive performance of breeding goat. Twenty-three does and six bucks having a similar age (1.5-2.0 years old) were exposed in this experiment. An amount of 200 gram of concentrate consisting of yellow corn (30%), rice brand (50%) and commercial concentrate CP 235 (20%) has been given to each experimental animal. The experimental animals were divided into two groups. The group was fed (12 animals) with M1 (roughage + concentrate) and the other group was fed (11 animals) with M2 (roughage). Moreover, each group were divided into four treatment namely: T1 (PGF2α), T2 (PGF2α + PMSG), T3 (PGF2α + HCG) and T4 (PGF2α + PMSG + HCG). The same treatment was applied to the other group. The data such as litter size and birth weight were collected from each experimental goat. Those data were analyzed using a 2 x 4 factorial experiment with unequal repetition. A composition between to treatment group was done using Least Significant Design (LSD). The result of the study showed that the effect of ration and gonadotrophin hormone on litter size and birth weight didn’t show any significant difference (P>0.05). The average of litter size and birth weight from roughage + concentrate treated animal (goat) were 1.92 and 1.51 kilogram respectively. However, the average of litter size and birth weight from roughage treated group were 1.58 and 1.48 kilogram respectively. (Animal Production 5(1): 5-10 (2003) Key words : Gonadotrophin, PGF2α, PMSG, Hormone, Goat

Voluntary Feed Intake and Growth of Local Sheep Fed on Road Side Grasses Following A 6-Week Feed Restriction Period

The purpose of this experiment was to investigate an adaptation time sheep to eat at a normal amount required by the local experiencing liveweight loss due to feed restriction, to investigate feed intake and feed digestibility and to investigate sheep growth following feed restriction. The experiment was conducted in The Experimental Farm of Faculty of Animal Husbandry, Unsoed. Twelve local sheep were randomly assigned to two different groups of treatment: namely, control (C) and restrictively Fed Animal (R). there were two periods through out the experiment, Period I (PI) and II (PII). During P I (6 week), Animals in group R were restrictively fed so that they lost live weight of approximately 15%. During P II Animals in group  R were than offered ad libitum. Whereas, animal in group C were fed ad libitum through out the experiment. The results of this experiment showed that animals in group R needed 17 days for adaptation to consume feed at a normal amount after they had experienced feed restriction for 6 weeks. Dry matter intake was not different between group C dan R. However, when it was expressed per metabolic live weight (g/Kg0,75), Dry matter intake for group R was significantly higher than that for group C (102.35 vs 91,79). Dry matter digestibility value for group R was higher than that for group C either during PI (62 vs 57%) or during PII (70 vs 61%). The rate of live weight gain was not different between C and R during period II. In conclusion, local sheep had capability of consuming more feed after resumption of full feeding for 17 days. (Animal Production 2(2): 47-52 (2000) Key words : local sheep, dry matter, organic matter, period, restriction, digestibility

The Effect of Enzyme and Probiotics Mixture in Drinking Water with Protein Level Differences on Body Weights, Feed Conversion and Production index on Broiler

This experiment was study of the enzyme and  probiotic in drinking water mixture was affected on body weight, feed conversion and production index in broiler. This experiment was carried out using 144 broilers, started at one day old and finished at 42 days of age, divided into 4 type treatment of three different level of protein. Experimental method was based on randomized complete design with twelve treatments, if differently, followed by orthogonal  polynomial. Type 1 (unit ABC) was treated with mixture of drinking water and amylase, protease and probiotic at day 3rd through 5th, day 14th , day 21st, day 28th and 35th ;  type 2 (unit DEF) was treated at day 7th ,17th, 27th and 37th ; type 3 (unit GHI) was treated day 21th , day 28th and 35th ; type 4 (unit JKL) without treatment (control). The level of protein for group I of unit ADGJ was 19% of starter feed and 16% of finisher feed. The level of protein for group II  unit BEHK was 21 %of starter feed and 18% finisher feed. The variable used in body weight, feed conversion, production index at the 5th and 6th weeks of age. Result indicated that the body weight optimum was 1483.33 gram at the 5th weeks of age and 1868,89 gram, feed conversion 1, 826 and production index 279,31 at the 6th weeks of age. These findings were observed in the group of chicken given drinking, water amylase, protease and probiotic mixed with at day 3rd trough 5th , day 14th , day 21st , day 28th and day 35th ; The level of protein was 23% of starter feed and 21% of finisher feed. The mixture of enzyme and probiotic in drinking water was concluded to improve in body weight, feed conversion and production index of broiler. (Animal Production 3(1): 26-30 (2001)Key Words: Broiler, enzyme, probiotic,  body weight, feed conversion, production index.

The Effect Of Feed Restriction And Exercise On Growt Of Merino Sheep

Penelitian dengan judul “Pengaruh Pembatasan  Pakan dan Exercise terhadap Pertumbuhan Domba Merino” dilakukan untuk mempelajari perubahan bobot badan dan komposisi tubuh selama periode pembatasan pakan dan kerja (exercise) yang kemudian diikuti oleh pemberian pakan secara adlibitum dan berhenti bekerja.penelitian ini terdiri dari dua periode.Pada periode pertama, 1,5 ekor Domba Merino kastrasi umur 4-5 bulan dibagi menjadi tiga perlakuan ,yaitu pembatasan pakan dan exercise selama 2,50 jam (perlakuan I), pembatasan pakan tanpa Exercise (perlakuan II), serta pemberian pakan secara ad libitum tanpa Exercise (perlakuan III), yang masing-masing perlakuan diulang lima kali. Pada periode kedua ,semua domba diberi pakan ad libitum tanpa exercise. Hasil penelitian menunjukankan bahwa pada akhir penelitian periode pertama ,domba dalam perlakuan satu I dan perlakuan II mengalami penurunan bobot badan sebesar 28 dan 27 persen dari bobot badan awal. Selama periode kedua, domba dalam perlakuan I dan perlakuan II tumbuh lebih cepat dari pada domba perlakuan III. Pada akhir periode pertama, domba dalam perlakuan I kehilangan lemak lebih banyak dari pada perlakuan II.Selama periode ke dua ,penimbunan protein pada perlakuan I dan II lebih cepat dibanding  perlakuan III. Domba pada perlakuan III mengalami penimbunan lemak lebih banyak dari pada perlakuan I dan II. Domba pada perlakuan I dan II selama periode ke dua mempunyai kemampuan makan lebih tinggi per kilogram bobot badan metabolis dibanding domba pada perlakuan III. (Animal Production 2(1): 18-24 (2000)Kata kunci: pembatasan pakan , komposisi tubuh , kemampuan makan, pertumbuhan.

Study of Physical Quality of Complete Feed Pellet with Different Forages Source and Binders

The purpose of this study was to know the effect of utilization of various kinds of binders in the making of complete diet that was made of several species of forages that was viewed from its physical properties (hardness and durability).  There were two formulations of complete feed and four kinds of binders a pelleting machine was used in this study.  Factorially, based on Completely Randomized Design (CRD) was used with feed formulation (A) with two levels namely elephant grass and the leaves of leucaena (a1) and rice straw and peanut straw (a2) as the sources of forage as the first factor, and the kinds of binders (B) with 3 % levels of each binders.  Four levels of binders namely b0 (without binder), b1 (lignosulphonate), b2 (bentonite) and b3 (CMC) were as the second factor.  There were 3 replications in each treatment combination.  Based on the results of this study, it was conclude that the hardness of pellets of complete feed was affected by feed formulations based on different kinds of forage and pellets binders, but not for durability of the pellets.  The highest value of hardness was achieved by a1b1 formulation. (Animal Production 6(1): 43-48 (2004) Key Words: Hardness, Durability, Complete Feed Pellet

The Quality of Rice Straw by Fermented with Manure As a Feed Ruminant

An experiment was conducted the quality of rice straw by fermented with manure as feed for ruminant. Materials used in this experiment were rice straw , manure and molasses. Four treatments rice straw + 3% molasses, B= rice straw + 3% molasses +30% manure. Parameters observed were  organoleptic character , pH, crude protein, neutral detergent fiber ( NDF) and acid detergent fiber (ADF). The result of this experiment suggested that rice straw treated with manure 20% and 30% increased is crude protein and descreased its NDF and ADF. (Animal Production 3(2): 62-66 (2001)Key word: Rice straw, manure, fermentation, ruminant.

The Effects of Various Types of Feed additives on The Chemical Composition of Local Chicken Meat (Gallus domestica).

Abstract. This study aims to determine the effect of giving various types of feed additives to the chemical composition value of super chicken chicken (Gallus domestica). This research is an experimental research using 20 super chicken chickens that come from chicken growth research (growth study). The design used in this study was Completely Randomized Design (RAL), consisting of 4 treatments and 5 replications. The treatment given was (A0 = control (Vita chick 0.7 gram / liter; A1 = 20 ml / liter probio-FM; A2 = 0.08% MOS-oligosaccharide / kg of feed and A3 = herbal leuser KI 5 ml / liter). is a 90 day old super chicken breast Chicken Variable observed moisture content, protein content and fat content The data obtained were analyzed by using vocabulary and tested further by Duncan's Multiple Range Test The results showed that treatment (P> 0,05) to the value of water content and protein of super chicken fowl.Average value of water content at each treatment A0 (69,81%), A1 (70,74%), A2 (71,56%) and A3 (71,52%) while mean value of protein A0 (18,95%), A1 (19,61%), A2 (19,01%) and A3 (19,14%)) P <0,05) to the fat content of super chicken flesh, mean of fat content were A0 (2.02%), A1 (1.49%), A2 (1.37%) and A3 (2.0%).

AITPM Email Newsletter Volume 0903, March 2009: Presidents Message

President’s Report Hello fellow AITPM members, First I would like on behalf of all AITPM members to send our condolences to all who have been affected by February’s tragic bushfires in regional Victoria, and deliver our best wishes to all of those involved in the rebuilding efforts. Over time I expect that the Victorian Government’s Royal Commission will analyse the circumstances and put forward a range of measures which will improve fire safety in vulnerable areas. As transport professionals it will be important for us to consider the findings and look to undertaking any recommendations that relate to the work we do. Not only in Victoria, but nationwide. In particular, the importance of logistics was highlighted following the fire events. Donors across Australia were this time requested to donate money rather than goods, presumably due in part to problems associated with the transport system coping with additional uncoordinated freight load, whilst being needed to support emergency management vehicle and managed freight movements. Notwithstanding, it was wonderful to see otherwise difficult to obtain goods, such as animal feed, being donated from far afield and transported in kind by trucking operators. As stated in last month’s Newsletter, AITPM made a direct cash donation to the Red Cross Bushfire Appeal immediately following the events, and a further donation to the Queensland Premier’s Disaster Relief Fund to support recovery after the North Queensland floods, which claimed seven lives. Again, we will need to monitor how the rebuilding effort unfolds particularly in regional Victoria and centres including Ingham in North Queensland, but I would urge all AITPM members who are in a position to support the restoration of the affected communities to play a part, particularly over time once the initial shock subsides and the steady job of rebuilding is underway. Onto lighter matters, AITPM’s flagship event, the 2009 AITPM National Conference, Traffic Beyond Tomorrow, being held in Adelaide from 5 to 7 August, is fast approaching. www.aitpm.com has all of the details about how to register, sponsor a booth, and so forth. We are looking forward to catching up with our conference “regulars” and meeting with new folks to AITPM, and Australian traffic and transport planning and management. Adelaide is one of my favourite places to visit and I’m looking forward to riding the light rail line extension through town and checking out progress on the road system development. Best regards all, Jon Bunker

White possession : the legacy of Cook's choice

Book Synopsis: From Terra Nullius to Land of Opportunities and Last Frontier, the European dream has constructed and deconstructed Australia to feed its imagination of new societies. At the same time Australia has over the last two centuries forged and re-invented its own liaisons with Europe arguably to carve out its identity. From the arts to social sciences, to society itself, a complex dynamic has grown between the two continents in ways that invite study and discussion. A transnational research group has begun its collective investigation project of which this first volume is the outcome. The book is a substantial multidisciplinary collection of current research and offers critical perspectives on culture, literature and history around themes at the heart of the Imagined Australia project. The essays instigate reflection, discovery and discussion of how reciprocal imagining between Australia and Europe has articulated itself and ways and dimensions in which a relationship between communities, imagined and not, has unfolded.

Synthesis of 4-arm star poly(L-Lactide) oligomers using an in situ-generated calcium-based initiator

Using an in situ-generated calcium-based initiating species derived from pentaerythritol, the bulk synthesis of well-defined 4-arm star poly(L-lactide) oligomers has been studied in detail. The substitution of the traditional initiator, stannous octoate with calcium hydride allowed the synthesis of oligomers that had both low PDIs and a comparable number of polymeric arms (3.7 – 3.9) to oligomers of similar molecular weight. Investigations into the degree of control observed during the course of the polymerization found that the insolubility of pentaerythritol in molten L-lactide resulted in an uncontrolled polymerization only when the feed mole ratio of L-lactide to pentaerythritol was 13. At feed ratios of 40 and greater, a pseudo-living polymerization was observed. As part of this study, in situ FT-Raman spectroscopy was demonstrated to be a suitable method to monitor the kinetics of the ring-opening polymerization (ROP) of lactide. The advantages of using this technique rather than FT-IR-ATR and 1H NMR for monitoring L-lactide consumption during polymerization are discussed.

The missing puzzle : birth of a format

The art of storytelling is one of the oldest forms of creative discourse. Apart from finding stories, the most important job in television is the construction of stories to have a broad audience appeal. This first-hand review of Missing Persons Unit, hereafter referred to as MPU, a prime time program on the Nine Network in Australia with immense audience appeal, is an original work by the executive producer (development and series producer Series One, executive producer Series Two and Three) based on an overview of two-and-a-half years of production on three series. Through a case study approach, this Masters project explores how story is constructed into a television format. The thesis comprises two parts: the creative component (weighted 50%) is demonstrated through two programs of MPU (one program for evaluation) and the academic component through a written exegesis (50%). This case study aims to demonstrate how observational hybrid series such as MPU can be managed to quick turn-around schedules with precise skill sets that cut across a number of traditional genre styles. With the advent of radio and then television, storytelling found a home and a series of labels called genres to help place them in a schedule for listeners and viewers to choose. Over recent years, with the advent of digital technology and the rush to collect the masses of content required to feed the growing television slate, storytelling has often been replaced by story gathering. Today even in factual series where a clear story construct is important, third party ‘quick fix’ specialists are hired to shape raw content shot by a field team, who never put their own work together and may never come into the edit suite during a project. This thesis explores the art of storytelling in fast turn-around television. In particular it explores the layer cake approach used in the production process of MPU, that enables producers of fast turn-around television to shepherd their own stories from field through to post-production. While each new hybrid series will require its own particular sets of skills, the exploration of the genesis of MPU will demonstrate the building blocks required to successfully produce this type of factual series. This study is also intended as a ‘road map’ for producers who wish to develop similar series.

Intelligent prognostics of machinery health utilising suspended condition monitoring data

The ability to forecast machinery failure is vital to reducing maintenance costs, operation downtime and safety hazards. Recent advances in condition monitoring technologies have given rise to a number of prognostic models for forecasting machinery health based on condition data. Although these models have aided the advancement of the discipline, they have made only a limited contribution to developing an effective machinery health prognostic system. The literature review indicates that there is not yet a prognostic model that directly models and fully utilises suspended condition histories (which are very common in practice since organisations rarely allow their assets to run to failure); that effectively integrates population characteristics into prognostics for longer-range prediction in a probabilistic sense; which deduces the non-linear relationship between measured condition data and actual asset health; and which involves minimal assumptions and requirements. This work presents a novel approach to addressing the above-mentioned challenges. The proposed model consists of a feed-forward neural network, the training targets of which are asset survival probabilities estimated using a variation of the Kaplan-Meier estimator and a degradation-based failure probability density estimator. The adapted Kaplan-Meier estimator is able to model the actual survival status of individual failed units and estimate the survival probability of individual suspended units. The degradation-based failure probability density estimator, on the other hand, extracts population characteristics and computes conditional reliability from available condition histories instead of from reliability data. The estimated survival probability and the relevant condition histories are respectively presented as “training target” and “training input” to the neural network. The trained network is capable of estimating the future survival curve of a unit when a series of condition indices are inputted. Although the concept proposed may be applied to the prognosis of various machine components, rolling element bearings were chosen as the research object because rolling element bearing failure is one of the foremost causes of machinery breakdowns. Computer simulated and industry case study data were used to compare the prognostic performance of the proposed model and four control models, namely: two feed-forward neural networks with the same training function and structure as the proposed model, but neglected suspended histories; a time series prediction recurrent neural network; and a traditional Weibull distribution model. The results support the assertion that the proposed model performs better than the other four models and that it produces adaptive prediction outputs with useful representation of survival probabilities. This work presents a compelling concept for non-parametric data-driven prognosis, and for utilising available asset condition information more fully and accurately. It demonstrates that machinery health can indeed be forecasted. The proposed prognostic technique, together with ongoing advances in sensors and data-fusion techniques, and increasingly comprehensive databases of asset condition data, holds the promise for increased asset availability, maintenance cost effectiveness, operational safety and – ultimately – organisation competitiveness.

Enhancing learning in dance technique through on-line-mediated reflective practice

‘Practice makes perfect’ expresses the common misconception that repetitive practice without appropriate feed-back will deliver improvement in tasks being practised. This paper explores the implementation of a student-driven feed-back mechanism and shows how functional and aesthetic understanding can be progressively enhanced through reflective practice. More efficient practice of clearly understood tasks will enhance dance training outcomes. We were looking for ways to improve teaching efficiency, effectiveness of the students’ practice in the studio and application of safe dance practices. We devised a web-based on-line format, ‘Performing Reflective Practice’, designed to augment and refine studio practice. Only perfect practice makes perfect!

Fuzzy associative memory for humanoid robot joint control

Traditional approaches to joint control required accurate modelling of the system dynamic of the plant in question. Fuzzy Associative Memory (FAM) control schemes allow adequate control without a model of the system to be controlled. This paper presents a FAM based joint controller implemented on a humanoid robot. An empirically tuned PI velocity control loop is augmented with this feed forward FAM, with considerable reduction in joint position error achieved online and with minimal additional computational overhead.

Biologically inspired joint control for a humanoid robot

The GuRoo is a 1.2 m tall, 23 degree of freedom humanoid constructed at the University of Queensland for research into humanoid robotics. The key challenge being addressed by the GuRoo project is the development of appropriate learning strategies for control and coordination of the robot's many joints. The development of learning strategies is seen as a way to side-step the inherent intricacy of modeling a multi-DOF biped robot. This paper outlines the approach taken to generate an appropriate control scheme for the joints of the GuRoo. The paper demonstrates the determination of local feedback control parameters using a genetic algorithm. The feedback loop is then augmented by a predictive modulator that learns a form of feed-forward control to overcome the irregular loads experienced at each joint during the gait cycle. The predictive modulator is based on the CMAC architecture. Results from tests on the GuRoo platform show that both systems provide improvements in stability and tracking of joint control.