Photocatalytic degradation of methylene blue by TiO(2)-Cu thin films: Theoretical and experimental study

In this work the effect of doping concentration and depth profile of Cu atoms on the photocatalytic and surface properties of TiO(2) films were studied. TiO(2) films of about 200 nn thickness were deposited on glass substrates on which a thin Cu layer (5 nm) was deposited. The films were annealed during 1 s to 100 degrees C and 400 degrees C, followed by chemical etching of the Cu film. The grazing incidence X-ray fluorescence measurements showed a thermal induced migration of Cu atoms to depths between 7 and 31 nm. The X-ray photoelectron spectroscopy analysis detected the presence of TiO(2), Cu(2)O and Cu(0) phases and an increasing Cu content with the annealing temperature. The change of the surface properties was monitored by the increasing red-shift and absorption of the ultraviolet-visible spectra. Contact angle measurements revealed the formation of a highly hydrophilic surface for the film having a medium Cu concentration. For this sample photocatalytic assays, performed by methylene blue discoloration, show the highest activity. The proposed mechanism of the catalytic effect, taking place on Ti/Cu sites, is supported by results obtained by theoretical calculations. (C) 2010 Elsevier B.V. All rights reserved.

Removal of metal ions from aqueous solution by chelating polymeric hydrogel

Polysaccharide natural seed coat from the tree Magonia pubescens, in the form of hydrogel was used to remove metals in aqueous solution. Swelling tests indicate that seed coat presents hydrogel behavior, with maximum water absorption of 292 g water/g. Adsorption experiments performed using Na(+), Mg(2+), K(+), Ca(2+), Cr(3+), Fe(3+) and Zn(2+) demonstrated that the polysaccharide structure has a high capacity to extract these ions from the aqueous solution. Scanning electron microscopy revealed significant morphological changes of the material before and after water contact. Differential scanning calorimetry measurements indicate a signal shift of the water evaporation temperature in the material with adsorbed zinc. X-ray photoelectron spectroscopy analysis combined with theoretical studies by the density functional theory and on Hartree-Fock (HF) level evidence that the metallic ions were adsorbed through coordination with hydroxyl groups of polysaccharide. In the case of Zn(2+) the lowest HF energy was observed for the tetracoordination mode, where Zn(2+) is coordinated by two hydroxyl groups and two water molecules.

Photocatalyst TiO(2)-Co: the effect of doping depth profile on methylene blue degradation

In this work, we study the effect of doping depth profile on the photocatalytic and surface properties of TiO(2) films. Two thin film layers of TiO(2) (200 nm) and Co (5 nm), respectively, were deposited by physical evaporation on glass substrate. These films were annealed for 1 s at 100 and 400 A degrees C and the Co layer was removed by chemical etching. Atomic force microscopy (AFM) phase images showed changes in the surface in function of thermal treatment. The grazing-incidence X-ray fluorescence (GIXRF) measurements indicated that the thermal treatment caused migration of Co atoms to below the surface, the depths found were between 19 and 29 nm. The contact angle showed distinct values in function of the doped profile or Co surface concentration. The UV-vis spectra presented a red shift with the increasing of thermal treatment. Photocatalytical assays were performed by methylene blue discoloration and the higher activity was found for TiO(2)-Co treated at 400 A degrees C, the ESI-MS showed the fragments formed during the methylene blue decomposition.

The interaction between atoms of Au and Cu with clean Si(111) surface: A study combining synchrotron radiation grazing incidence X-ray fluorescence analysis and theoretical calculations

In order to evaluate the interactions between Au/Cu atoms and clean Si(l 11) surface, we used synchrotron radiation grazing incidence X-ray fluorescence analysis and theoretical calculations. Optimized geometries and energies on different adsorption sites indicate that the binding energies at different adsorption sites are high, suggesting a strong interaction between metal atom and silicon surface. The Au atom showed higher interaction than Cu atom. The theoretical and experimental data showed good agreement. Crown Copyright (C) 2009 Published by Elsevier B.V. All rights reserved.

Photocatalytic decomposition of methylene blue via Fenton mechanisms by silicon wafer doped with Au and Cu: a theoretical and experimental study

In this work, we studied the photocatalytic and the structural aspects of silicon wafers doped with Au and Cu submitted to thermal treatment. The materials were obtained by deposition of metals on Si using the sputtering method followed by fast heating method. The photocatalyst materials were characterized by synchrotron-grazing incidence X-ray fluorescence, ultraviolet-visible spectroscopy, X-ray diffraction, and assays of H(2)O(2) degradation. The doping process decreases the optical band gap of materials and the doping with Au causes structural changes. The best photocatalytic activity was found for thermally treated material doped with Au. Theoretical calculations at density functional theory level are in agreement with the experimental data.

Bifurcations and bistability in cavity-assisted photoassociation of Bose-Einstein-condensed molecules

We study the photoassociation of Bose-Einstein condensed atoms into molecules using an optical cavity field. The driven cavity field introduces a dynamical degree of freedom into the photoassociation process, whose role in determining the stationary behavior has not previously been considered. The semiclassical stationary solutions for the atom and molecules as well as the intracavity field are found and their stability and scaling properties are determined in terms of experimentally controllable parameters including driving amplitude of the cavity and the nonlinear interactions between atoms and molecules. For weak cavity driving, we find a bifurcation in the atom and molecule number occurs that signals a transition from a stable steady state to nonlinear Rabi oscillations. For a strongly driven cavity, there exists bistability in the atom and molecule number.

Quantum control of electromagnetically induced transparency dispersion via atomic tunneling in a double-well Bose-Einstein condensate

Electromagnetically induced transparency (EIT) is an important tool for controlling light propagation and nonlinear wave mixing in atomic gases with potential applications ranging from quantum computing to table top tests of general relativity. Here we consider EIT in an atomic Bose-Einstein condensate (BEC) trapped in a double-well potential. A weak probe laser propagates through one of the wells and interacts with atoms in a three-level Lambda configuration. The well through which the probe propagates is dressed by a strong control laser with Rabi frequency Omega(mu), as in standard EIT systems. Tunneling between the wells at the frequency g provides a coherent coupling between identical electronic states in the two wells, which leads to the formation of interwell dressed states. The macroscopic interwell coherence of the BEC wave function results in the formation of two ultranarrow absorption resonances for the probe field that are inside of the ordinary EIT transparency window. We show that these new resonances can be interpreted in terms of the interwell dressed states and the formation of a type of dark state involving the control laser and the interwell tunneling. To either side of these ultranarrow resonances there is normal dispersion with very large slope controlled by g. We discuss prospects for observing these ultranarrow resonances and the corresponding regions of high dispersion experimentally.

1988 Yearbook

Vol. 7; Sept. 1988; 109 p. b&w, color photographs TOC: Life at LaGuardia…2 / Activities and Events…17 / Faculty and Staff…33 / Activities at LaGuardia…49 / Graduation…71 Yearbook Committee Credits: Faculty Advisor, Vincent Banrey; Project Director, Catherine Whan; Editors: Alexandra Gomez, Juan Jimenez, GloryAnn Torres; Asst. Editor, Kenny Rosa; LAYOUT: Vincent Banrey, Marino "Tito" Cabrera, Shirley Chance, George Condors, Milton Ferreira, Maria Flores, Alexandra Gomez, Ana Lisa Gonzalez, Bernadette Henry, Juan Jimenez, Alejandro Meneses, Richard Provost, Kenny Rosa, Maria Sanchez, GloryAnn Torres, Catherine Whan, Alan O. Young; PHOTOGRAPHY: Peter Abbate, Sandra Acres, Young Baek Choi, Randy Fader Smith, Milton Ferriera, Alexandra Gomez, Juan Jimenez, Seymour Lerman, Chuck Lindsey, Victoria Pamias, Richard Provost, Alan Scribner, Frank Tocco, GloryAnn Torres, Catherine Whan. ART: Jose Marti (Cover Design and Division Pages); Martin Carrichner, Jose Marti (Endsheet Design), Arnold Escalera, Jacqui Fernandez, Richard Massey, Alejandro Meneses; WRITING: Anthony Archer, Alexandra Bastidas, Joie Fadde, Alexandra Gomez, Ana Lisa Gonzalez, Doreen Hansen, Bernadette Henry, Sarah Hudson, Juan Jimenez, Donna Libert, Cathy Passiglia, Jody Pincus, Richard Provost, Kenny Rosa, Maria Sanchez, Alan Scribner, Christiana Sommerville, GloryAnn Torres, Catherine Whan, Alan O. Young; SPECIAL THANKS: Blanca Arbito, Classic Studios, Edward Hollins, Umoja Kwanguvu, Kelly Johnson and the LaGuardia Archives, Andrew Saluga and Recreation Staff, Ted Schiffman of Taylor Publishing.

Identificação de falhas em engrenagens na transmissão de trator agrícola por meio de análise de vibrações

Neste trabalho é apresentado o desenvolvimento de um método de análise de falhas, por meio de análise de vibrações, para a bancada de final de linha das transmissões dos tratores linha 5000 da John Deere Brasil, o qual tem como finalidade diferenciar transmissões aprovadas de transmissões com defeito em engrenagens na caixa de marchas, e também auxiliar na identificação da engrenagem com defeito. Para o desenvolvimento deste método foram utilizados equipamentos de medição e aquisição de dados disponíveis na John Deere Brasil. Os testes foram realizados na bancada de final da linha de transmissões, possibilitando a aplicação do método sem a necessidade de alteração na bancada de testes. Os sinais padrões da transmissão em cada uma das quatro marchas foram levantados através da medição de quatro transmissões boas. De posse destes padrões, (assinatura em cada marcha), partiu-se para a identificação de como estes são alterados por diferentes defeitos em diversas engrenagens da caixa de marchas, sendo para isto induzidos defeitos em diferentes engrenagens da caixa de marchas de transmissões boas. Os sinais em todas as marchas nestas transmissões com defeito induzido foram medidos e analisado as alterações em relação aos padrões, resultando a conclusão de que a aplicação do método de análise de vibrações no final de linha de transmissões da John Deere Brasil é possível, tanto para a diferenciação entre transmissões boas e transmissões com defeito em engrenagens da caixa de marchas, quanto como auxiliar na identificação de qual engrenagem da caixa de marchas está com defeito.

Foto-grafando : uma proposta de intervenção estética para o ambiente escolar agressivo

A presente dissertação propõe uma perspectiva de intervenção institucional. Tal proposta tem como pano de fundo uma leitura do contemporâneo e suas conseqüências para a vida do sujeito moderno, incluindo-se aí a escola, naquilo que sofre e reproduz. Esta leitura é feita a partir da Walter Benjamin e Zygmunt Bauman, além de um diálogo com a psicanálise, especialmente Wilfred Bion. O resultado é a proposição e as conseqüências de uma intervenção estética em âmbito escolar. O material obtido tem origem numa escola pública estadual de Porto Alegre, RS, durante o período de um ano (2002). Não apresenta dados estatísticos, mas um ensaio de intervenção, com as respectivas dificuldades e possibilidades da escola diante do fenômeno da agressividade e da violência.

Avaliação de opções sob consideração de volatilidades históricas, implícitas e condicionadas: o caso TELEBRÁS na BOVESPA

Buscamos aferir ganhos na precificação de opções lançadas sobre a ação Telebrás PN, com a utilização de modelos auto regressivos de volatilidade· condicionada, cujos resultados foram comparados àqueles gerados pelos procedimentos numéricos de volatilidades históricas e implícitas. Nesta tarefa, a dinâmica do estudo levou ao estabelecimento de novos objetivos, que destacamos: a) identificação de modelos mais eficientes para filtragem da média do processo sobre retornos de Telebrás PN, que eventualmente pudessem otimizar o emprego dos modelos da classe ARCH; b) aferir anomalias de mercadodevidas a negociaçõesem dias específicos da semana; c) esclarecer influências exercidas pela sensibilidade dos preços das opções sobre a eficiência dos modelos de volatilidade condicionada, com vista a definir condições para o alcance de resultados práticos no campo da precificação de opções.

Um estudo sobre a persistência de performance positiva dos fundos IBOVESPA ativos

O objetivo desta dissertação é identificar se persistência de performance positiva um fenômeno presente entre os fundos de investimento ativos em relação ao índice da bolsa de valores de São Paulo (IBOVESPA). Para tanto, foram utilizadas informações em bases diárias, para período de janeiro de 1997 dezembro de 2001, de 191 fundos que tiveram para cada ano sua performance calculada. Em cada ano sob estudo definiu-se, pelo menos, dois grupos: um em que se alinhavam os fundos que apresentavam os melhores indicadores outro em que estavam presentes aqueles cujos desempenhos foram considerados piores. Os fundos que lograram sucesso em permanecer no primeiro grupo em pares de anos consecutivos foram denominados persistentes. Para que se pudesse medir significância dos resultados apurados, fez-se uso do instrumental de testes estatísticos, testes de hipóteses, que buscaram identificar se as proporções de fundos persistentes forneciam evidências suficientes para que se garantisse ocorrência do fenômeno no mercado brasileiro para período pesquisado.