Nutritional behaviour and beliefs of ski-mountaineers: a semi-quantitative and qualitative study.

BACKGROUND: Endurance athletes are advised to optimize nutrition prior to races. Little is known about actual athletes' beliefs, knowledge and nutritional behaviour. We monitored nutritional behaviour of amateur ski-mountaineering athletes during 4 days prior to a major competition to compare it with official recommendations and with the athletes' beliefs. METHODS: Participants to the two routes of the 'Patrouille des Glaciers' were recruited (A, 26 km, ascent 1881 m, descent 2341 m, max altitude 3160 m; Z, 53 km, ascent 3994 m, descent 4090 m, max altitude 3650 m). Dietary intake diaries of 40 athletes (21 A, 19 Z) were analysed for energy, carbohydrate, fat, protein and liquid; ten were interviewed about their pre-race nutritional beliefs and behaviour. RESULTS: Despite belief that pre-race carbohydrate, energy and fluid intake should be increased, energy consumption was 2416 ± 696 (mean ± SD) kcal · day(-1), 83 ± 17 % of recommended intake, carbohydrate intake was only 46 ± 13 % of minimal recommended (10 g · kg(-1) · day(-1)) and fluid intake only 2.7 ± 1.0 l · day(-1). CONCLUSIONS: Our sample of endurance athletes did not comply with pre-race nutritional recommendations despite elementary knowledge and belief to be compliant. In these athletes a clear and reflective nutritional strategy was lacking. This suggests a potential for improving knowledge and compliance with recommendations. Alternatively, some recommendations may be unrealistic.

Regional differences of physical activity and sedentary behaviour in Swiss children are not explained by socio-demographics or the built environment.

OBJECTIVE: We evaluated whether regional differences in physical activity (PA) and sedentary behaviour (SB) existed along language boundaries within Switzerland and whether potential differences would be explained by socio-demographics or environmental characteristics. METHODS: We combined data of 611 children aged 4 to 7 years from four regional studies. PA and SB were assessed by accelerometers. Information about the socio-demographic background was obtained by questionnaires. Objective neighbourhood attributes could be linked to home addresses. Multivariate regression models were used to test associations between PA and SB and socio-demographic characteristics and neighbourhood attributes. RESULTS: Children from the German compared to the French-speaking region were more physically active and less sedentary (by 10-15 %, p < 0.01). Although German-speaking children lived in a more favourable environment and a higher socioeconomic neighbourhood (differences p < 0.001), these characteristics did not explain the differences in PA behaviour between French and German speaking. CONCLUSIONS: Factors related to the language region, which might be culturally rooted were among the strongest correlates of PA and SB among Swiss children, independent of individual, social and environmental factors.

Smoking behaviour, involuntary smoking, attitudes towards smoke-free legislations, and tobacco control activities in the European Union

The six most important cost-effective policies on tobacco control can be measured by the Tobacco Control Scale (TCS). The objective of our study was to describe the correlation between the TCS and smoking prevalence, self-reported exposure to secondhand smoke (SHS) and attitudes towards smoking restrictions in the 27 countries of the European Union (EU27).

The Impact of Supervisor's Advice, Codes of Conduct, Accountability and Moral Attentiveness of Individuals on Discriminatory Behaviour Against Immigrants.

Past studies on the personnel selection demonstrated that a supervisor's advice to discriminate can lead to compliant behaviours. This study had the aim to extend past findings by examining what can overcome the powerful influence of the hierarchy. 50 Swiss managers participated to an in-basket exercise. The main task was to evaluate Swiss candidates (in-group) and foreigners (out-groups: Spanish and Kosovo Albanians) and to select two applicants for a job interview. Main results were the effect of codes of conduct to prevent discrimination against out-group applicants in the presence of a supervisor's advice to prefer in-group members. But, when participants were accountable to an audience, this beneficial effect disappears because participants followed the supervisor's advice. The second aim was to assess if the difference in responses between participants was related to their difference in moral attentiveness. Results showed some significant relationships but not always in the direction expected.

Exploring the link between flexible working and organizational performance

The expansion of flexible work experienced since the 1980s in developed economies is consistent with a more generic trend towards organizational flexibility, which many authors see as essential in order to compete in the dynamic global environment (Volberda, 1998). From this point of view, the changing demands of the environment have forced organizations to seek the ability to adapt rapidly and effectively as a means to be successful or even to survive. In the quest for flexibility, every area of the organization has been scrutinized in order to render it as ¿agile¿ as possible. In the human resources arena, this analysis has led to the definition of diverse ¿flexible working practices¿ (FWP) that describe a wide range of employment practices, which differ from the traditional full-time job with a fixed salary and a permanent contract. These practices have been described using other terms, such as ¿alternative¿ (Polivka, 1996; Powell & Mainiero, 1999), ¿non-standard¿ (Kalleberg, 2000), or ¿atypical¿ (De Grip, Hoevenberg, &m Willems, 1997), which coincide in denoting their divergence from the most traditional forms of employment. This article will show that quite different practices have been embraced by the common term ¿flexible working practices.¿ Subsequently, the results of empirical research regarding the implications for organizational performance of a number of flexible practices will be commented on.

Identifying pedagogical, technological and organizational barriers in virtual learning environments

Virtual learning environments are online spaces where learners interact with other learners, teachers, resources and the environment in itself. Although technology is meant to enhance the learning process, there are important issues regarding pedagogical and organizational aspects that must be addressed. In this paper we review the barriers detected in a virtual university which exclusively uses Internet as the main channel of communication, with no face-to-face requirements exceptthose related to final evaluation.

Purchasing and supply management capabilities in Finnish medium-sized enterprises

Purchasing and supply management (PSM) has become increasingly important for companies to survive in current highly competitive market. Increased outsourcing has extended the role of PSM, making external resource management and supplier relationships critical success factors in business. However, the recent research has mainly concentrated on large enterprises. Therefore the PSM issues related to medium-sized enterprises represent a significant research area. The thesis aims to explore the status and role of PSM in Finnish medium-sized firms, understand how strategic companies consider PSM to be, clarify what are the competence requirements for PSM professionals, and increase the understanding of PSM capabilities needed from the points view of individual competence and organisational capabilities. The study uses data that was collected in 2007 from purchasing executives at the director/CEO level representing a sample of 94 Finnish firms. 54 % of the respondent enterprises had a supply strategy. The total supply cost was on average 60 % of firms' turnover. Centralisation of PSM and outsourcing of logistics will increase in Finnish medium-sized enterprises. The findings point out that Finnish medium-sized enterprises had strategical features of PSM. However, Finnish firms have not concentrated on making strategies that relate to PSM. The elements that explain the existence of a supply strategy could be found in this study. It can be concluded from this study that there is an advantageous base for the development of strategic PSM, because nearly all the enterprises were of the opinion that PSM capabilities have an effect on business success. When reviewing the organisational capabilities, the five most important development elements were supplier relationships, both operational and strategic processes, time management, and personnel's competence. Training in internationalisation, strategic management, and communication could help to improve competences of PSM personnel.

Individual Perception of Organizational Values

The objective of this master’s thesis was to examine how corporate values come true among the white-collar employees in the case organization. It was also studied if values were perceived similarly in the different departments. Impact of organizational position and education on value orientation was tested through hypotheses based on earlier values research. There are only few value scales available for measuring organizational values. The empirical study results indicate that personnel’s perception of organizational values can be measured statistically. When defining the scale it is utmost important to link the questions and claims close to the employees’ daily working environment. In this study, Work ethic appeared as the strongest organizational value reflecting respondents’ commitment to their duties. Related to corporate values, Performance was perceived as the strongest value and Emphasis on people the weakest. Value consensus between the departments varied. According to the previous research organizational position and educational level has an impact on value perceptions. In this study, employees in superior position or with higher education perceived organizational values to come true better than subordinates or employees with lower education. Empirical data (N=229) was collected by a web-based survey questionnaire among white-collar employees in the case organization in April 2008. Statistical analyses were performed by SPSS programme.

Henkilöstön hyvinvoinnin kehittäminen teollisuuden pk-yrityksessä

Tässä työssä on tarkasteltu työyhteisön hyvinvointia ja työilmapiiriä tulehduttavia tekijöitä case yrityksessä. Tutkielman tavoitteena on ollut löytää tiedonkulun ja tiimityöskentelyn ongelmiin ratkaisuja. Tutkimusmenetelmänä on käytetty laadullista tutkimusta ja empiirinen materiaali koostuu avoimen anonyymi-kyselyn vastauksien sisällöstä. Kyselyn tuloksista merkittävimmiksi ongelma-alueiksi työyhteisössä muodostuivat tiedonkulun heikkous ja keskinäisen arvostuksen puute. Erityisen positiivisiksi asioiksi työntekijät kokivat fyysisen työturvallisuuden ja luottamuksen työn jatkuvuuteen. Henkilöstövoimavarojen johtamisen vaatimusten kasvaessa muuttuvan liiketoiminnan mukana on erityisesti pienien pk-yrityksen kiinnitettävä huomiota henkilöstöosaston toimintaan ja työlainsäädännön vaateisiin. Yritysten yhä enemmän panostaessa ydinosaamiseensa, korostuu henkilöstöhankinnassa ja henkilöstöjohtamisessa alan erityisosaajien sitouttaminen. Nykypäivänä työntekijät eivät enää motivoidu ainoastaan palkan suuruudesta, vaan vaativat sitoutumisensa vastapainoksi työhyvinvointiin panostamista. Huonon työilmapiirin vallitessa ihmiset alkavat helposti suhtautua työhön ulkokohtaisesti eivätkä halua jakaa omaamaansa tietoa muille.

Determination of compression behaviour of coating layer

The strength properties of paper coating layer are very important in converting and printing operations. Too great or low strength of the coating can affect several problems in printing. One of the problems caused by the strength of coating is the cracking at the fold. After printing the paper is folded to final form and the pages are stapled together. In folding the paper coating can crack causing aesthetic damage over printed image or in the worst case the centre sheet can fall off in stapling. When folding the paper other side undergoes tensile stresses and the other side compressive stresses. If the difference between these stresses is too high, the coating can crack on the folding. To better predict and prevent cracking at the fold it is good to know the strength properties of coating layer. It has measured earlier the tensile strength of coating layer but not the compressive strength. In this study it was tried to find some way to measure the compressive strength of the coating layer and investigate how different coatings behave in compression. It was used the short span crush test, which is used to measure the in-plane compressive strength of paperboards, to measure the compressive strength of the coating layer. In this method the free span of the specimen is very small which prevent buckling. It was measured the compressive strength of free coating films as well as coated paper. It was also measured the tensile strength and the Bendtsen air permeance of the coating film. The results showed that the shape of pigment has a great effect to the strength of coating. Platy pigment gave much better strength than round or needle-like pigment. On the other hand calcined kaolin, which is also platy but the particles are aggregated, decreased the strength substantially. The difference in the strength can be explained with packing of the particles which is affecting to the porosity and thus to the strength. The platy kaolin packs up much better than others and creates less porous structure. The results also showed that the binder properties have a great effect to the compressive strength of coating layer. The amount of latex and the glass transition temperature, Tg, affect to the strength. As the amount of latex is increasing, the strength of coating is increasing also. Larger amount of latex is binding the pigment particles better together and decreasing the porosity. Compressive strength was increasing when the Tg was increasing because the hard latex gives a stiffer and less elastic film than soft latex.

Thermoplastic bioactive composite – with special reference to dissolution behaviour and tissue response

Bioactive glasses are surface-active ceramic materials which support and accelerate bone growth in the body. During the healing of a bone fracture or a large bone defect, fixation is often needed. The aim of this thesis was to determine the dissolution behaviour and biocompatibility of a composite consisting of poly(ε-caprolactone-co-DL-lactide) and bioactive glass (S53P4). In addition the applicability as an injectable material straight to a bone defect was assessed. In in vitro tests the dissolution behaviour of plain copolymer and composites containing bioactive glass granules was evaluated, as well as surface reactivity and the material’s capability to form apatite in simulated body fluid (SBF). The human fibroblast proliferation was tested on materials in cell culture. In in vivo experiments, toxicological tests, material degradation and tissue reactions were tested both in subcutaneous space and in experimental bone defects. The composites containing bioactive glass formed a unified layer of apatite on their surface in SBF. The size and amount of glass granules affected the degradation of polymer matrix, as well the material’s surface reactivity. In cell culture on the test materials the human gingival fibroblasts proliferated and matured faster compared with control materials. In in vitro tests a connective tissue capsule was formed around the specimens, and became thinner in the course of time. Foreign body cell reactions in toxicological tests were mild. In experimental bone defects the specimens with a high concentration of small bioactive glass granules (<45 μm) formed a dense apatite surface layer that restricted the bone ingrowth to material. The range of large glass granules (90-315 μm) with high concentrations formed the best bonding with bone, but slow degradation on the copolymer restricted the bone growth only in the superficial layers. In these studies, the handling properties of the material proved to be good and tissue reactions were mild. The reactivity of bioactive glass was retained inside the copolymer matrix, thus enabling bone conductivity with composites. However, the copolymer was noticed to degradate too slowly compared with the bone healing. Therefore, the porosity of the material should be increased in order to improve tissue healing.

Effect of magnesium sulphate and L-tryptophan and genotype on the feed intake, behaviour and meat quality of pigs

Sixty-nine entire male pigs with different halothane genotype (homozygous halothanepositive – nn-, n=36; and homozygous halothane negative – NN-, n=33) were fed with a supplementation of magnesium sulphate (Mg) and/or L-tryptophan (Trp) in the diet for 5days before slaughter. Animals were housed individually and were submitted to stressful ante mortem conditions (mixed in the lorry according to treatments and transported 1h on rough roads). Individual feed intake was recorded during the 5-day treatment. At the abattoir, pig behaviour was assessed in the raceway to the stunning system and during the stunning period by exposure to CO2. Muscle pH, colour, water holding capacity, texture and cathepsin activities were determined to assess meat quality. The number of pigs with an individual feed intake lower than 2kg/day was significantly different among diets (P<0.05; Control: 8.7%; Mg&Trp: 43.5%; Trp:17.4%) and they were considered to have inadequate supplement intake. During the antemortem period, 15.2% of pigs included in the experiment died, and this percentagedecreased to 8.7% in those pigs with a feed intake > 2kg/day, all of them from thestress-sensitive pigs (nn). In general, no differences were observed in the behaviour ofpigs along the corridor leading to the stunning system and inside the CO2 stunningsystem. During the stunning procedure, Trp diet showed shorter periods of muscularexcitation than control and Mg&Trp diets. The combination of a stressful ante mortemtreatment and Mg&Trp supplementation led to carcasses with high incidence of severeskin lesions. Different meat quality results were found when considering all pigs orconsidering only those with adequate supplement intake. In this later case, Trp increased pH45 (6.15) vs Control diet (5.96) in the Longissimus thoracis (LT) muscle (P<0.05) and pH at 24h (Trp: 5.59 vs C: 5.47) led to a higher incidence of dark, firm and dry (DFD) traits in SM muscle (P<0.05). Genotype affected negatively all the meat quality traits. Seventy-five percent of LT and 60.0% of the SM muscles from nn pigs wereclassified as pale, soft and exudative (PSE), while none of the NN pigs showed these traits (P<0.0001). No significant differences were found between genotypes on the incidence of DFD meat. Due to the negative effects observed in the Mg&Trp group in feed intake and carcass quality, the utilization of a mixture of magnesium sulphate and tryptophan is not recommended