Immigrants in the Czech Republic (With Special Reference to Ukrainian Workers and "Western" Firms Operating in Prague)

International migration has increased rapidly in the Czech Republic, with more than 150,000 legally registered foreign residents at the end of 1996. A large proportion of these are in Prague - 35% of the total in December 1996. The aim of this project was to enrich the fund of information concerning the "environment", reasons and "mechanisms" behind immigration to the Czech Republic. Mr. Drbohlav looked first at the empirical situation and on this basis set out to test certain well-known migration theories. He focused on four main areas: 1) a detailed description and explanation of the stock of foreign citizens legally settled in Czech territory, concentrating particularly on "economic" migrants; 2) a questionnaire survey targeting a total of 192 Ukrainian workers (98 in the fall 1995 and 94 in the fall 1996) working in Prague or its vicinity; 3) a second questionnaire survey of 40 "western" firms (20 in 1996 and 20 in 1997) operating out of Prague; 4) an opinion poll on how the Czech population reacts to foreign workers in the CR. Over 80% of economic immigrants at the end of 1996 were from European countries, 16% from Asia and under 2% from North America. The largest single nationalities were Ukrainians, Slovaks, Vietnamese and Poles. There has been a huge increase in the Ukrainian immigrant community over both space (by region) and time (a ten-fold increase since 1993), and at 40,000 persons this represents one third of all legal immigrants. Indications are that many more live and work there illegally. Young males with low educational/skills levels predominate, in contrast with the more heterogeneous immigration from the "West". The primary reason for this migration is the higher wages in the Czech Republic. In 1994 the relative figures of GDP adjusted for parity of purchasing power were US$ 8,095 for the Czech Republic versus US$ 3,330 for the Ukraine as a whole and US$ 1,600 for the Zakarpatye region from which 49% of the respondents in the survey came. On an individual level, the average Czech wage is about US$ 330 per month, while 50% of the Ukrainian respondents put their last monthly wage before leaving for the Czech Republic at under US$ 27. The very low level of unemployment in the latter country (fluctuating around 4%) was also mentioned as an important factor. Migration was seen as a way of diversifying the family's source of income and 49% of the respondents had made their plans together with partners or close relatives, while 45% regularly send remittances to Ukraine (94% do so through friends or relatives). Looking at Ukrainian migration from the point of view of the dual market theory, these migrants' type and conditions of work, work load and earnings were all significantly worse than in the primary sector, which employs well educated people and offers them good earnings, job security and benefits. 53% of respondents were working and/or staying in the Czech Republic illegally at the time of the research, 73% worked as unqualified, unskilled workers or auxiliary workers, 62% worked more than 12 hours a day, and 40% evaluated their working conditions as hard. 51% had no days off, earnings were low in relation to the number of hours worked. and 85% said that their earnings did not increase over time. Nearly half the workers were recruited in Ukraine and only 4% expressed a desire to stay in the Czech Republic. Network theories were also borne out to some extent as 33% of immigrants came together with friends from the same village, town or region in Ukraine. The number who have relatives working in the Czech Republic is rising, and many wish to invite relatives or children to visit them. The presence of organisations which organised cross-border migration, including some which resort to organising illegal documents, also gives some support for the institutional theory. Mr. Drbohlav found that all the migration theories considered offered some insights on the situation, but that none was sufficient to explain it all. He also points out parallels with many other regions of the world, including Central America, South and North America, Melanesia, Indonesia, East Africa, India, the Middle East and Russia. For the survey of foreign and international firms, those chosen were largely from countries represented by more than one company and were mainly active in market services such as financial and trade services, marketing and consulting. While 48% of the firms had more than 10,000 employees spread through many countries, more than two thirds had fewer than 50 employees in the Czech Republic. Czechs formed 80% plus of general staff in these firms although not more than 50% of senior management, and very few other "easterners" were employed. All companies absolutely denied employing people illegally. The average monthly wage of Czech staff was US$ 850, with that of top managers from the firm's "mother country" being US$ 6,350 and that of other western managers US$ 3,410. The foreign staff were generally highly mobile and were rarely accompanied by their families. Most saw their time in the Czech Republic as positive for their careers but very few had any intention of remaining there. Factors in the local situation which were evaluated positively included market opportunities, the economic and political environment, the quality of technical and managerial staff, and cheap labour and low production costs. In contrast, the level of appropriate business ethics and conduct, the attitude of local and regional authorities, environmental production conditions, the legal environment and financial markets and fiscal policy were rated very low. In the final section of his work Mr. Drbohlav looked at the opinions expressed by the local Czech population in a poll carried out at the beginning of 1997. This confirmed that international labour migration has become visible in this country, with 43% of respondents knowing at least one foreigner employed by a Czech firm in this country. Perception differ according to the region from which the workers come and those from "the West" are preferred to those coming from further east. 49% saw their attitude towards the former as friendly but only 20% felt thus towards the latter. Overall, attitudes towards migrant workers is neutral, although 38% said that such workers should not have the same rights as Czech citizens. Sympathy towards foreign workers tends to increase with education and the standard of living, and the relatively positive attitudes towards foreigners in the South Bohemia region contradicted the frequent belief that a lack of experience of international migration lowers positive perceptions of it.

Continuous measurements of methane mixing ratios from ice cores

This work presents a new, field-deployable technique for continuous, high-resolution measurements of methane mixing ratios from ice cores. The technique is based on a continuous flow analysis system, where ice core samples cut along the long axis of an ice core are melted continuously. The past atmospheric air contained in the ice is separated from the melt water stream via a system for continuous gas extraction. The extracted gas is dehumidified and then analyzed by a Wavelength Scanned-Cavity Ring Down Spectrometer for methane mixing ratios. We assess the performance of the new measurement technique in terms of precision (±0.8 ppbv, 1σ), accuracy (±8 ppbv), temporal (ca. 100 s), and spatial resolution (ca. 5 cm). Using a firn air transport model, we compare the resolution of the measurement technique to the resolution of the atmospheric methane signal as preserved in ice cores in Greenland. We conclude that our measurement technique can resolve all climatically relevant variations as preserved in the ice down to an ice depth of at least 1980 m (66 000 yr before present) in the North Greenland Eemian Ice Drilling ice core. Furthermore, we describe the modifications, which are necessary to make a commercially available spectrometer suitable for continuous methane mixing ratio measurements from ice cores.

Accuracy of B-type natriuretic peptide tests to exclude congestive heart failure: systematic review of test accuracy studies

BACKGROUND: Congestive heart failure (CHF) is a major public health problem. The use of B-type natriuretic peptide (BNP) tests shows promising diagnostic accuracy. Herein, we summarize the evidence on the accuracy of BNP tests in the diagnosis of CHF and compare the performance of rapid enzyme-linked immunosorbent assay (ELISA) and standard radioimmunosorbent assay (RIA) tests. METHODS: We searched electronic databases and the reference lists of included studies, and we contacted experts. Data were extracted on the study population, the type of test used, and methods. Receiver operating characteristic (ROC) plots and summary ROC curves were produced and negative likelihood ratios pooled. Random-effect meta-analysis and metaregression were used to combine data and explore sources of between-study heterogeneity. RESULTS: Nineteen studies describing 22 patient populations (9 ELISA and 13 RIA) and 9093 patients were included. The diagnosis of CHF was verified by echocardiography, radionuclide scan, or echocardiography combined with clinical criteria. The pooled negative likelihood ratio overall from random-effect meta-analysis was 0.18 (95% confidence interval [CI], 0.13-0.23). It was lower for the ELISA test (0.12; 95% CI, 0.09-0.16) than for the RIA test (0.23; 95% CI, 0.16-0.32). For a pretest probability of 20%, which is typical for patients with suspected CHF in primary care, a negative result of the ELISA test would produce a posttest probability of 2.9%; a negative RIA test, a posttest probability of 5.4%. CONCLUSIONS: The use of BNP tests to rule out CHF in primary care settings could reduce demand for echocardiography. The advantages of rapid ELISA tests need to be balanced against their higher cost.

Point-of-care testing in the cardiovascular operating theatre

Point-of-care testing (POCT) remains under scrutiny by healthcare professionals because of its ill-tried, young history. POCT methods are being developed by a few major equipment companies based on rapid progress in informatics and nanotechnology. Issues as POCT quality control, comparability with standard laboratory procedures, standardisation, traceability and round robin testing are being left to hospitals. As a result, the clinical and operational benefits of POCT were first evident for patients on the operating table. For the management of cardiovascular surgery patients, POCT technology is an indispensable aid. Improvement of the technology has meant that clinical laboratory pathologists now recognise the need for POCT beyond their high-throughput areas.

Limitations of the Odds Ratio in Gauging the Performance of a Diagnostic or Prognostic Marker

A marker that is strongly associated with outcome (or disease) is often assumed to be effective for classifying individuals according to their current or future outcome. However, for this to be true, the associated odds ratio must be of a magnitude rarely seen in epidemiological studies. An illustration of the relationship between odds ratios and receiver operating characteristic (ROC) curves shows, for example, that a marker with an odds ratio as high as 3 is in fact a very poor classification tool. If a marker identifies 10 percent of controls as positive (false positives) and has an odds ratio of 3, then it will only correctly identify 25 percent of cases as positive (true positives). Moreover, the authors illustrate that a single measure of association such as an odds ratio does not meaningfully describe a marker’s ability to classify subjects. Appropriate statistical methods for assessing and reporting the classification power of a marker are described. The serious pitfalls of using more traditional methods based on parameters in logistic regression models are illustrated.

Comparative study of biphasic calcium phosphates with different HA/TCP ratios in mandibular bone defects. A long-term histomorphometric study in minipigs

Three biphasic calcium phosphate (BCP) bone substitute materials with hydroxyapatite (HA)/tricalcium phosphate (TCP) ratios of 20/80, 60/40, and 80/20 were compared to coagulum, particulated autogenous bone, and deproteinized bovine bone mineral (DBBM) in membrane-protected bone defects. The defects were prepared in the mandibles of 24 minipigs that were divided into four groups of six with healing times of 4, 13, 26, and 52 weeks, respectively. The histologic and histomorphometric evaluation focused on differences in amount and pattern of bone formation, filler degradation, and the interface between bone and filler. Collapse of the expanded polytetrafluoroethylene barrier membrane into the coagulum defects underlined the necessity of a filler material to maintain the augmented volume. Quantitatively, BCP 20/80 showed bone formation and degradation of the filler material similar to autografts, whereas BCP 60/40 and BCP 80/20 rather equaled DBBM. Among the three BCP's, the amount of bone formation and degradation of filler material seemed to be inversely proportional to the HA/TCP ratio. The fraction of filler surface covered with bone was highest for autografts at all time points and was higher for DBBM than BCP 80/20 and 60/40 at the early healing phase. TRAP-positive multinucleated cells were identified on BCP and DBBM surfaces without showing typical signs of resorption lacunae.

Fabrication and characterization of room temperature operating single electron transistors using focused ion beam technologies

The single electron transistor (SET) is a Coulomb blockade device, whose operation is based on the controlled manipulation of individual electrons. Single electron transistors show immense potential to be used in future ultra lowpower devices, high density memory and also in high precision electrometry. Most SET devices operate at cryogenic temperatures, because the charging energy is much smaller than the thermal oscillations. The room temperature operation of these devices is possible with sub- 10nm nano-islands due to the inverse dependance of charging energy on the radius of the conducting nano-island. The fabrication of sub-10nm features with existing lithographic techniques is a technological challenge. Here we present the results for the first room temperature operating SET device fabricated using Focused Ion Beam deposition technology. The SET device, incorporates an array of tungsten nano-islands with an average diameter of 8nm. The SET devices shows clear Coulomb blockade for different gate voltages at room temperature. The charging energy of the device was calculated to be 160.0 meV; the capacitance per junction was found to be 0.94 atto F; and the tunnel resistance per junction was calculated to be 1.26 G Ω. The tunnel resistance is five orders of magnitude larger than the quantum of resistance (26 k Ω) and allows for the localization of electrons on the tungsten nano-island. The lower capacitance of the device combined with the high tunnel resistance, allows for the Coulomb blockade effects observed at room temperature. Different device configurations, minimizing the total capacitance of the device have been explored. The effect of the geometry of the nano electrodes on the device characteristics has been presented. Simulated device characteristics, based on the soliton model have been discussed. The first application of SET device as a gas sensor has been demonstrated.

An empirical comparison of methods for meta-analysis of diagnostic accuracy showed hierarchical models are necessary

OBJECTIVE: Meta-analysis of studies of the accuracy of diagnostic tests currently uses a variety of methods. Statistically rigorous hierarchical models require expertise and sophisticated software. We assessed whether any of the simpler methods can in practice give adequately accurate and reliable results. STUDY DESIGN AND SETTING: We reviewed six methods for meta-analysis of diagnostic accuracy: four simple commonly used methods (simple pooling, separate random-effects meta-analyses of sensitivity and specificity, separate meta-analyses of positive and negative likelihood ratios, and the Littenberg-Moses summary receiver operating characteristic [ROC] curve) and two more statistically rigorous approaches using hierarchical models (bivariate random-effects meta-analysis and hierarchical summary ROC curve analysis). We applied the methods to data from a sample of eight systematic reviews chosen to illustrate a variety of patterns of results. RESULTS: In each meta-analysis, there was substantial heterogeneity between the results of different studies. Simple pooling of results gave misleading summary estimates of sensitivity and specificity in some meta-analyses, and the Littenberg-Moses method produced summary ROC curves that diverged from those produced by more rigorous methods in some situations. CONCLUSION: The closely related hierarchical summary ROC curve or bivariate models should be used as the standard method for meta-analysis of diagnostic accuracy.