929 resultados para Nucleophilic additions
Resumo:
There is excess nitrate (NO3) in the Pearl River coastal plume in the southern waters of Hong Kong in summer. We hypothesize that phosphorus (P) limitation controls the utilization of excess NO3 due to the high N:P ratio in the Pearl River. To test this hypothesis, we conducted two 1-day cruises on July 13 and 19, 2000 to examine the response of the phytoplankton to P additions with respect to changes in biomass, uptake of nutrients and nutrient uptake ratios using a batch incubation of natural water samples collected from the Pearl River estuary and adjacent coastal waters. At a station (E1, salinity =5) in the Pearl River estuary, the N/P ratio at the surface was 46:1, (64 muM DIN: 1.3 muM PO4) and decreased to 24:1 (12 muM DIN: 0.5 muM PO4) downstream at a station (Stn 26, salinity =26) in the coastal plume south of Hong Kong. Without a P addition, NO3 in the water samples collected at E1 could not be depleted during a 9 day incubation (similar to20 muM NO3 remaining). With a P addition, NO3 disappeared completely on day 6 with the depletion of the added PO4 (2-3 muM). This was also true for a station, E4 (salinity= 15) further downstream, but within the estuary. At Stn 26, in the coastal plume south of Hong Kong, NO3 (similar to11.5 muM) was eventually depleted without the addition of PO4, but it took 8 days instead of 5 days for Stn E4. The uptake ratio of dissolved inorganic nitrogen (DIN) to PO4, without a P addition was 51:1, 43:1 and 46:1 for Stns E1, E4 and 26, respectively. With a P addition, the DIN/PO4 uptake ratio decreased to 20:1, 14:1 and 12:1, respectively, for the 3 stations. These results clearly indicate potential P limitation to utilization of NO3 in the Pearl River estuary, resulting in excess NO3 in waters of the coastal plume downstream of the estuary, some of which would eventually be transported offshore. High uptake ratios of N:P without a P addition (43N:1P) suggest that phytoplankton have a nitrogen uptake capacity in excess of the Redfield ratio of 16N: 1P by 2.5-3 times. The value of 2.5-3 times was likely a maximum that should have contained a contribution of P released from desorption of P from sediments or from regeneration by zooplankton grazing and bacterial activity during the incubation of natural water samples. Without a P addition, however, phytoplankton biomass did not increase. This means that P turnover rates or regeneration may allow phytoplankton to take up additional N in excess of the Redfield ratio and store it, but without increasing the algal biomass. Therefore, high ambient N:P ratios in excess of the Redfield ratio do indicate potential P limitation to phytoplankton biomass in this estuarine coastal ecosystem. (C) 2004 Elsevier Ltd. All rights reserved.
Resumo:
A method of hydride generation-atomic fluorescence spectrometry was proposed in the present paper for the determination of trace arsenic and selenium in jellyfish. The samples were treated by the combination of microwave digestion and lyophilization. The optimal conditions for treating and analyzing samples were established. The problem of the effect of the superfluous acid in the digesting solution on the results was solved, and the influence of coexisting foreign ions on the determination of arsenic and selenium was investigated. The accuracy of the method was confirmed by the method of standard additions. This method proved to be simple, rapid and repeatable, and is suitable for the analysis of biologic samples containing water.
Resumo:
Two series of sulfided Ni or Co promoted Mo/alumina catalysts, having different Ni or Co loadings, were characterized by their activities for the transformation of cyclopentanone into cyclopentanethiol (flow reactor, 220 degrees C, atmospheric pressure) and for the hydrodesulfurization of dibenzothiophene (flow reactor, 340 degrees C, 3 MPa hydrogen pressure). The addition of the promoter increased significantly the activity of the Mo/alumina catalyst for both reactions, up to a maximum obtained with the catalysts having a (promoter)/(promoter+Mo) molar ratio equal to 0.3-0.4. This increase in activity was due in part to an increase in the hydrogenating properties of the Mo/alumina catalyst. However, an additional modification of the catalyst (basic and nucleophilic properties) must be considered to account for the spectacular effect of the promoter on the rate of the dibenzothiophene direct desulfurization reaction. (C) 1999 Elsevier Science B.V. All rights reserved.
Resumo:
I have invented "Internet Fish," a novel class of resource-discovery tools designed to help users extract useful information from the Internet. Internet Fish (IFish) are semi-autonomous, persistent information brokers; users deploy individual IFish to gather and refine information related to a particular topic. An IFish will initiate research, continue to discover new sources of information, and keep tabs on new developments in that topic. As part of the information-gathering process the user interacts with his IFish to find out what it has learned, answer questions it has posed, and make suggestions for guidance. Internet Fish differ from other Internet resource discovery systems in that they are persistent, personal and dynamic. As part of the information-gathering process IFish conduct extended, long-term conversations with users as they explore. They incorporate deep structural knowledge of the organization and services of the net, and are also capable of on-the-fly reconfiguration, modification and expansion. Human users may dynamically change the IFish in response to changes in the environment, or IFish may initiate such changes itself. IFish maintain internal state, including models of its own structure, behavior, information environment and its user; these models permit an IFish to perform meta-level reasoning about its own structure. To facilitate rapid assembly of particular IFish I have created the Internet Fish Construction Kit. This system provides enabling technology for the entire class of Internet Fish tools; it facilitates both creation of new IFish as well as additions of new capabilities to existing ones. The Construction Kit includes a collection of encapsulated heuristic knowledge modules that may be combined in mix-and-match fashion to create a particular IFish; interfaces to new services written with the Construction Kit may be immediately added to "live" IFish. Using the Construction Kit I have created a demonstration IFish specialized for finding World-Wide Web documents related to a given group of documents. This "Finder" IFish includes heuristics that describe how to interact with the Web in general, explain how to take advantage of various public indexes and classification schemes, and provide a method for discovering similarity relationships among documents.
Resumo:
Reconstructing a surface from sparse sensory data is a well known problem in computer vision. Early vision modules typically supply sparse depth, orientation and discontinuity information. The surface reconstruction module incorporates these sparse and possibly conflicting measurements of a surface into a consistent, dense depth map. The coupled depth/slope model developed here provides a novel computational solution to the surface reconstruction problem. This method explicitly computes dense slope representation as well as dense depth representations. This marked change from previous surface reconstruction algorithms allows a natural integration of orientation constraints into the surface description, a feature not easily incorporated into earlier algorithms. In addition, the coupled depth/ slope model generalizes to allow for varying amounts of smoothness at different locations on the surface. This computational model helps conceptualize the problem and leads to two possible implementations- analog and digital. The model can be implemented as an electrical or biological analog network since the only computations required at each locally connected node are averages, additions and subtractions. A parallel digital algorithm can be derived by using finite difference approximations. The resulting system of coupled equations can be solved iteratively on a mesh-pf-processors computer, such as the Connection Machine. Furthermore, concurrent multi-grid methods are designed to speed the convergence of this digital algorithm.
Resumo:
The new readily available sulfamide-amine alcohol 11 was found to be effective in catalyzing enantioselective phenylacetylene addition to aromatic ketones without using another central metal, providing the chiral tertiary propargylic alcohols in good yields (up to 83%) and enantioselectivities (up to 83% e.e.). The conditions of this catalytic process are both mild and Simple, (c) 2005 Elsevier B.V. All rights reserved.
Resumo:
Trotter, David, 'Les manuscrits latins de la Chirurgia d'Albucasis et la lexicographie du latin m?di?val', Archivum Latinitatis Medii Aevi (Bulletin Du Cange) (2001) 59(1) pp.181-202 RAE2008
Resumo:
Rothwell, W., Femina (Trinity College, Cambridge MS B.14.40); edited with an Introduction and Notes (The Anglo-Norman On-Line Hub, 2005) RAE2008
Resumo:
A two-week multi-step experiment that introduces students to mechanistic organic chemistry and substituent effects. A simple preparation of differentially substituted para-nitrophenyl benzoates is followed by ester hydrolysis with monitoring by UV-Vis spectroscopy to provide rate data for the reaction.
Resumo:
A simple experiment to demonstrate nucleophilic addition to a carbonyl. Sodium borohydride-mediated reduction of fluorenone is a fast and high-yielding reaction that is suitable for beginning students. Students isolate their fluorenol product by recrystallization and characterize it by NMR and IR.
Resumo:
Current building regulations are generally prescriptive in nature. It is widely accepted in Europe that this form of building regulation is stifling technological innovation and leading to inadequate energy efficiency in the building stock. This has increased the motivation to move design practices towards a more ‘performance-based’ model in order to mitigate inflated levels of energy-use consumed by the building stock. A performance based model assesses the interaction of all building elements and the resulting impact on holistic building energy-use. However, this is a nebulous task due to building energy-use being affected by a myriad of heterogeneous agents. Accordingly, it is imperative that appropriate methods, tools and technologies are employed for energy prediction, measurement and evaluation throughout the project’s life cycle. This research also considers that it is imperative that the data is universally accessible by all stakeholders. The use of a centrally based product model for exchange of building information is explored. This research describes the development and implementation of a new building energy-use performance assessment methodology. Termed the Building Effectiveness Communications ratios (BECs) methodology, this performance-based framework is capable of translating complex definitions of sustainability for energy efficiency and depicting universally understandable views at all stage of the Building Life Cycle (BLC) to the project’s stakeholders. The enabling yardsticks of building energy-use performance, termed Ir and Pr, provide continuous design and operations feedback in order to aid the building’s decision makers. Utilised effectively, the methodology is capable of delivering quality assurance throughout the BLC by providing project teams with quantitative measurement of energy efficiency. Armed with these superior enabling tools for project stakeholder communication, it is envisaged that project teams will be better placed to augment a knowledge base and generate more efficient additions to the building stock.
Resumo:
The focus of this thesis is the preparation of enantiopure sulfoxides by means of copper-catalysed asymmetric sulfoxidation, with particular emphasis on the synthesis of aryl benzyl and aryl alkyl sulfoxides. Chapter 1 contains a review of the methods employed for the asymmetric synthesis of sulfoxides, compounds with many applications in stereoselective synthesis and in some cases with pharmaceutical application. Chapter 1 describes asymmetric oxidation, including metal-catalysed, non metal-catalysed and enzyme-catalysed, in addition to synthetic approaches via nucleophilic substitution of appropriately substituted precursors. Kinetic resolution in oxidation of sulfoxides to the analogous sulfones is also discussed; in certain cases, access to enantioenriched sulfoxides can be achieved via a combination of asymmetric sulfoxidation and complementary kinetic resolution. The design and synthesis of a series of sulfides to enable exploration of the substituent effects of the copper-mediated oxidation was undertaken, and oxidation to the racemic sulfoxides and sulfones to provide reference samples was conducted. Oxidation of the sulfides using copper-Schiff base catalysis was undertaken leading to enantioenriched sulfoxides. The procedure employed is clean, inexpensive, not air-sensitive and utilises aqueous hydrogen peroxide as oxidant. Extensive investigation of the influence of the reaction conditions such as solvent, temperature, copper salt and ligand was undertaken to lead to the optimised conditions. While the direct attachment of one aryl substituent to the sulfide is essential for efficient enantiocontrol, in the case of the second substituent the enantiocontol is dependent on the steric rather than electronic features of the substituent. Significantly, use of naphthyl-substituted sulfides results in excellent enantiocontrol; notably 97% ee, obtained in the oxidation of 2-naphthyl benzyl sulfide, represents the highest enantioselectivity reported to date for a copper-mediated sulfur oxidation. Some insight into the mechanistic features of the copper-mediated sulfur oxidation has been developed based on this work, although further investigation is required to establish the precise nature of the catalytic species responsible for asymmetric sulfur oxidation. Full experimental details, describing the synthesis and structural characterisation, and determination of enantiopurity are included in chapter 3.
Resumo:
The use of unmalted oats or sorghum in brewing has great potential for creating new beer types/flavors and saving costs. However, the substitution of barley malt with oat or sorghum adjunct is not only innovative but also challenging due to their specific grain characteristics. The overall objectives of this Ph.D. project were: 1) to investigate the impact of various types and levels of oats or sorghum on the quality/processability of mashes, worts, and beers; 2) to provide solutions as regards the application of industrial enzymes to overcome potential brewing problems. For these purposes, a highly precise rheological method using a controlled stress rheometer was developed and successfully applied as a tool for optimizing enzyme additions and process parameters. Further, eight different oat cultivars were compared in terms of their suitability as brewing adjuncts and two very promising types identified. In another study, the limitations of barley malt enzymes and the benefits of the application of industrial enzymes in high-gravity brewing with oats were determined. It is recommended to add enzymes to high-gravity mashes when substituting 30% or more barley malt with oats in order to prevent filtration and fermentation problems. Pilot-scale brewing trials using 10–40% unmalted oats revealed that the sensory quality of oat beers improved with increasing adjunct level. In addition, commercially available oat and sorghum flours were implemented into brewing. The use of up to 70% oat flour and 50% sorghum flour, respectively, is not only technically feasible but also economically beneficial. In a further study on sorghum was demonstrated that the optimization of industrial mashing enzymes has great potential for reducing beer production costs. A comparison of the brewing performance of red Italian and white Nigerian sorghum clearly showed that European grown sorghum is suitable for brewing purposes; 40% red sorghum beers were even found to be very low in gluten.
Resumo:
The Pulitzer Prize in Music, established in 1943, is one of America's most prestigious awards. It has been awarded to fifty-three composers for a "distinguished musical composition of significant dimension by an American that has had its first performance in the United States during the year." Composers who have won the Pulitzer Prize are considered to be at the pinnacle of their creativity and have provided the musical world with classical music compositions worthy of future notice. By tracing the history of Pulitzer Prize-winning composers and their compositions, researchers and musicians enhance their understanding of the historical evolution of American music, and its impact on American culture. Although the clarinet music of some of these composers is rarely performed today, their names will be forever linked to the Pulitzer, and because of that, their compositions will enjoy a certain sense of immortality. Of the fifty-four composers who have won the award, forty-seven have written for the clarinet in a solo or chamber music setting (five or less instruments). Just as each Pulitzer Prize-winning composition is a snapshot of the state of American music at that time, these works trace the history of American clarinet musical development, and therefore, they are valuable additions to the clarinet repertoire and worthy of performance. This dissertation project consists of two recitals featuring the solo and chamber clarinet music of sixteen Pulitzer Prize-winning composers, extended program notes containing information on each composer's life, their music, the Pulitzer Prize-winning composition and the recital selection, and a complete list of all Pulitzer Prize-winning composers and their solo and chamber clarinet music. Featured Composers Dominick Argento, To Be Sung Upon the Water Leslie Bassett, Soliloquies William Bolcom, Little Suite of Four Dances Aaron Copland, As it Fell Upon a Day John Corigliano, Soliloquy Norman Dello Joio, Concertante Morton Gould, Benny's Gig Charles Ives, Largo Douglas Moore, Quintet for Clarinet and Strings George Perle, Three Sonatas Quincy Porter, Quintet for Clarinet and Strings Mel Powell, Clarinade Shulamit Ran, Private Game Joseph Schwantner, Entropy Leo Sowerby, Sonata Ernst Toch, Adagio elegiaco
Resumo:
Red mangrove (Rhizophora mangle L.) forests have distinct tree-height zones, with tall trees fringing the ocean and shorter trees in interior stands. A long-term nitrogen (N) and phosphorus (P) fertilization experiment in Almirante Bay, Bocas del Toro Province, Panama has shown that tree-height zonation is primarily related to nutrient limitation. This experiment was used to test the effects of in-situ nutrient additions and tree zonation on mangrove sediments. The sediments underlying the experimental R. mangle trees were sampled and N2 fixation, 15N, chlorophyll a, percent N and P, and percent organic biomass were quantified. Both N and P additions significantly affected almost every parameter measured in both zones within this experiment. These results are likely to have implications for management since N and P inputs are predicted to increase throughout the tropics and subtropics worldwide.