Risk Assessment of Modern Landfill Structures in Finland

The purpose of this thesis was to investigate environmental permits of landfills with respect to the appropriateness of risk assessments focusing on contaminant migration, structures capable to protect the environment, waste and leachate management and existing environmental impacts of landfills. According to the requirements, a risk assessment is always required to demonstrate compliance with environmental protection requirements if the environmental permit decision deviates from the set requirements. However, there is a reason to doubt that all relevant risk factors are identified in current risk assessment practices in order to protect people end environment. In this dissertation, risk factors were recognized in 12 randomly selected landfills. Based on this analysis, a structural risk assessment method was created. The method was verified with two case examples. Several development needs were found in the risk assessments of the environmental permit decisions. The risk analysis equations used in the decisions did not adequately take into account all the determining factors like waste prospects, total risk quantification or human delineated factors. Instead of focusing on crucial factors, the landfill environmental protection capability is simply expressed via technical factors like hydraulic conductivity. In this thesis, it could be shown, that using adequate risk assessment approaches the most essential environmental impacts can be taken into account by consideration of contaminant transport mechanisms, leachate effects, and artificial landfill structures. The developed structural risk analysing (SRA) method shows, that landfills structures could be designed in a more cost-efficient way taking advantage of recycled or by-products. Additionally, the research results demonstrate that the environmental protection requirements of landfills should be updated to correspond to the capability to protect the environment instead of the current simplified requirements related to advective transport only.

Effect of standard and neutral-pH peritoneal dialysis solutions upon fibroblasts proliferation

Introduction: Continuous exposition of the peritoneal membrane to conventional dialysis solutions is an important risk factor for inducing structural and functional alterations. Objective: To compare in vitro mouse fibroblast NIH-3T3 cell viability after exposition to a neutral pH dialysis solution in comparison to cells exposed to a standard solution. Methods: Experimental study to compare the effects of a conventional standard or a neutral-pH, low-glucose degradation products peritoneal dialysis solution on the viability of exposed fibroblasts in cell culture. Both solutions were tested in all the commercially available glucose concentrations. Cell viability was evaluated with tetrazolium salt colorimetric assay. Results: Fibroblast viability was significantly superior in the neutral pH solution in comparison to control, in all three glucose concentrations (Optical density in nm-means ± SD: 1.5% 0.295 ± 0.047 vs. 0.372 ± 0.042, p < 0.001; 2.3% 0.270 ± 0.036 vs. 0.337 ± 0.051, p < 0.001; 4.25% 0.284 ± 0.037 vs. 0.332 ± 0.032, p < 0.001; control vs. neutral pH respectively, Student t Test). There was no significant difference in cell viability between the three concentrations of glucose when standard solution was used (ANOVA p = 0.218), although cell viability was higher after exposition to neutral pH peritoneal dialysis fluid at 1.5% in comparison to 2.3 and 4.25% glucose concentrations (ANOVA p = 0.008: Bonferroni 1.5% vs. 2.3% p = 0.033, 1.5% vs. 4.25% p = 0.014, 2.3% vs. 4.25% p = 1.00). Conclusion: Cell viability was better in neutral pH dialysis solution, especially in the lower glucose concentration. A more physiological pH and lower glucose degradation products may be responsible for such results.

Analysis and guidelines for implementation of EN 1090-2 Standard to assist execution class assignment of steel structures

Finnish design and consulting companies are delivering robust and cost-efficient steel structures solutions to a large number of manufacturing companies worldwide. Recently introduced EN 1090-2 standard obliges these companies to specify the execution class of steel structures for their customers. This however, requires clarifying, understanding and interpreting the sophisticated procedure of execution class assignment. The objective of this research is to provide a clear explanation and guidance through the process of execution class assignment for a given steel structure and to support the implementation of EN 1090-2 standard in Rejlers Oy, one of Finnish design and consulting companies. This objective is accomplished by creating a guideline for designers that elaborates on the four-step process of the execution class assignment for a steel structure or its part. Steps one to three define the consequence class (projected consequences of structure failure), the service category (hazards associated with the service use exploitation of steel structure) and the production category (manufacturing process peculiarities), based on the ductility class (capacity of structure to withstand deformations) and the behaviour factor (corresponds to structure seismic behaviour). The final step is the execution class assignment taking into account results of previous steps. Main research method is indepth literature review of European standards family for steel structures. Other research approach is a series of interviews of Rejlers Oy representatives and its clients, results of which have been used to evaluate the level of EN 1090-2 awareness. Rejlers Oy will use the developed novel coherent standard implementation guideline to improve its services and to obtain greater customer satisfaction.

A new cultural cleavage in post-modern society

The attitudes towards gender and homosexuality tend to be linked at the micro level (individuals), which explains the political saliency of this newly emerging cleavage. At the macro level (country), the main finding is that the value orientations towards gender and homosexuality are strongly embedded in the basic cultural or civilisation differences among countries. As developing countries modernise and enter post-modernity, they will also experience the gender cleavage, especially when they adhere to an individualistic culture. Cultural cleavages in the post-modern society, whether in rich or developing countries, can only be properly researched by the survey method. It opens up a large area for both micro and macro analyses in the social sciences.

The new geopolitics : the world system and Northern Europe seen from a modern geopolitical perspective

Finnish Defence Studies is published under the auspices of the National Defence College, and the contributions reflect the fields of research and teaching of the College. Finnish Defence Studies will occasionally feature documentation on Finnish Security Policy. Views expressed are those of the authors and do not necessarily imply endorsement by the National Defence College.

Bioimage informatics in STED super-resolution microscopy

Optical microscopy is living its renaissance. The diffraction limit, although still physically true, plays a minor role in the achievable resolution in far-field fluorescence microscopy. Super-resolution techniques enable fluorescence microscopy at nearly molecular resolution. Modern (super-resolution) microscopy methods rely strongly on software. Software tools are needed all the way from data acquisition, data storage, image reconstruction, restoration and alignment, to quantitative image analysis and image visualization. These tools play a key role in all aspects of microscopy today – and their importance in the coming years is certainly going to increase, when microscopy little-by-little transitions from single cells into more complex and even living model systems. In this thesis, a series of bioimage informatics software tools are introduced for STED super-resolution microscopy. Tomographic reconstruction software, coupled with a novel image acquisition method STED< is shown to enable axial (3D) super-resolution imaging in a standard 2D-STED microscope. Software tools are introduced for STED super-resolution correlative imaging with transmission electron microscopes or atomic force microscopes. A novel method for automatically ranking image quality within microscope image datasets is introduced, and it is utilized to for example select the best images in a STED microscope image dataset.

Vaakatasossa toimivan modulaarisen pakkausyksikön prässin suunnittelu kartonkipakkauksille

Kartonkivuokien käyttö elintarviketeollisuudessa on kasvanut vuosi vuodelta ja kuluttajat ovat löytäneet kartonkipakkaukset niiden ekologisuuden, graafisen ulkoasun sekä turvallisuuden ansiosta. Vuokien valmistus mekaanisella prässäyksellä kehittyy jatkuvasti ja uusi teknologia mahdollistaa täysin uudentyyppisten prässien valmistuksen. Työn tavoitteena on tutkia voidaanko mekaaninen prässäys toteuttaa vaakatasossa uutta teknologiaa hyödyntämällä kustannustehokkaasti. Lisäksi tavoitteena on selvittää, millä voimantuottomenetelmällä prässiltä vaadittava voimantuotto on edullisinta toteuttaa. Suunnittelussa otetaan huomioon olemassa olevat työkalut, modulaarisuus, EU:n elintarvikelainsäädäntö sekä muut kriittiset tekijät. Työssä sovelletaan metodisen konstruoinnin mukaisesti systemaattista ongelmanratkaisua (VDI 2221). Lisäksi työssä käydään läpi kilpaileva menetelmä arvoanalyysi. Suunnittelua ja komponenttivalintoja analysoidaan SWOT- sekä pisteanalyysien avulla. Suunnittelussa syntyneiden ratkaisujen lujuusominaisuuksia tarkastellaan FEM-analyysillä. Tuloksista havaittiin, että vaakatasossa suoritettava prässäyksen voimantuotto on edullisinta ja yksinkertaisinta toteuttaa sähkömekaniikalla, että halutut ominaisuudet voidaan saavuttaa ja rakenne pitää mahdollisimman kompaktina. Kustannustehokkuuden saavuttamiseksi hankinnat on syytä kilpailuttaa huolellisesti. Työn lopussa esitetään mahdollisia jatkokehityskohteita, joita syntyi tämän diplomityön aikana.

Pienten yhtiöiden tilintarkastusstandardin arvioitu vaikutus tilintarkastuksen hyötyihin – Standard for Audits of Small Entities, SASE

Suomessa ja muissa Pohjoismaissa on tunnistettu haasteita kansainvälisten tilintarkastusstandardien eli ISA-standardien soveltamisessa pienten yhtiöiden tilintarkastuksiin. ISA-standardien on kritisoitu sisältävän liian yksityiskohtaisia ja jopa epärealistisia vaatimuksia ajatellen pienien yhtiöiden tilintarkastuksia. Pohjoismaisella yhteistyöllä onkin alettu kehittää omaa standardia pienten yhtiöiden tilintarkastuksiin. Niin sanotun SASE-standardin on raportoitu muun muassa korostavan tilintarkastajan ammatillista harkintaa ja keventävän pienten yhtiöiden tilintarkastuksen vaatimuksia. Koska kuitenkin aikaisemmin sääntelyn lisäämisellä on pyritty muun muassa lisääntyneeseen tilintarkastuksen luotettavuuteen, josta myös pienten yhtiöiden on itse tutkittu hyötyvän, on tutkimuksessa haluttu selvittää, miten kehitteillä olevan SASE-standardin arvioidaan vaikuttavan yleisesti pienten yhtiöiden tilintarkastuksella saavutettaviin hyötyihin. Tutkimus on toteutettu toiminta-analyyttisena laadullisena tutkimuksena, ja tutkimusmetodina on käytetty tilintarkastajien ja yliopiston tutkijatohtorin haastatteluja. Tutkimuksen tulosten mukaan kehitteillä olevan SASE-standardin arvioidaan vaikuttavan pienten yhtiöiden tilintarkastuksen hyötyihin kaksisuuntaisesti. Toisaalta SASE-standardi voi lisätä tilintarkastuksen hyötyjä, koska tilintarkastaja voisi keskittyä tarkastuskohteen kannalta olennaisempiin asioihin, hyödyntää hiljaista tietoaan sekä lisätä vuorovaikutusta yhtiön omistajajohdon kanssa. SASE-standardin ei arvioida muuttavan juurikaan käytännön tilintarkastustyötä ja periaatteessa olennaisuuksiin keskittymisen ja riskien tehokkaamman tunnistamisen tulisi hyödyttää myös tilintarkastuskohteen ulkoisia sidosryhmiä, kuten rahoittajia. Kuitenkin tutkimuksessa nousi esiin SASE-standardin mahdollinen heikko maine. Mikäli SASE-standardia pidettäisiin vähäpätöisempänä tai epäluotettavampana kuin aikaisempaa käytäntöä, luottamus tilintarkastusta ja tarkastuskohdetta kohtaan heikkenisi ja sitä kautta myös tilintarkastuksen hyödyt pienenisivät. Tutkimuksen johtopäätöksenä voidaan esittää, että tilintarkastuksen sääntelyn keventämisen vaikutus tilintarkastuksen hyötyihin ei niinkään synny käytännön työn kautta. Tilintarkastuksen hyötyihin pikemminkin vaikuttavat maineeseen, viestintään ja vuorovaikutukseen liittyvät seikat. Toimivalla vuorovaikutuksella yhtiön omistajajohdon ja tilintarkastajan välillä voidaan tilintarkastuksen hyötyjä korostaa, ja toisaalta taas riittävällä ulkoisiin sidosryhmiin kohdistuvalla tiedottamisella voidaan hyötyjen heikkenemistä ehkäistä. Keskeiseksi seikaksi tutkimuksessa nousee se, että tilintarkastuksen luotettavuuden ja tason säilyminen on pystyttävä todistamaan.

Public-private partnership investments in dry ports – Russian logistics markets and risks

The investments have always been considered as an essential backbone and so-called ‘locomotive’ for the competitive economies. However, in various countries, the state has been put under tight budget constraints for the investments in capital intensive projects. In response to this situation, the cooperation between public and private sector has grown based on public-private mechanism. The promotion of favorable arrangement for collaboration between public and private sectors for the provision of policies, services, and infrastructure in Russia can help to address the problems of dry ports development that neither municipalities nor the private sector can solve alone. Especially, the stimulation of public-private collaboration is significant under the exposure to externalities that affect the magnitude of the risks during all phases of project realization. In these circumstances, the risk in the projects also is becoming increasingly a part of joint research and risk management practice, which is viewed as a key approach, aiming to take active actions on existing global and specific factors of uncertainties. Meanwhile, a relatively little progress has been made on the inclusion of the resilience aspects into the planning process of a dry ports construction that would instruct the capacity planner, on how to mitigate the occurrence of disruptions that may lead to million dollars of losses due to the deviation of the future cash flows from the expected financial flows on the project. The current experience shows that the existing methodological base is developed fragmentary within separate steps of supply chain risk management (SCRM) processes: risk identification, risk evaluation, risk mitigation, risk monitoring and control phases. The lack of the systematic approach hinders the solution of the problem of risk management processes of dry port implementation. Therefore, management of various risks during the investments phases of dry port projects still presents a considerable challenge from the practical and theoretical points of view. In this regard, the given research became a logical continuation of fundamental research, existing in the financial models and theories (e.g., capital asset pricing model and real option theory), as well as provided a complementation for the portfolio theory. The goal of the current study is in the design of methods and models for the facilitation of dry port implementation through the mechanism of public-private partnership on the national market that implies the necessity to mitigate, first and foremost, the shortage of the investments and consequences of risks. The problem of the research was formulated on the ground of the identified contradictions. They rose as a continuation of the trade-off between the opportunities that the investors can gain from the development of terminal business in Russia (i.e. dry port implementation) and risks. As a rule, the higher the investment risk, the greater should be their expected return. However, investors have a different tolerance for the risks. That is why it would be advisable to find an optimum investment. In the given study, the optimum relates to the search for the efficient portfolio, which can provide satisfaction to the investor, depending on its degree of risk aversion. There are many theories and methods in finance, concerning investment choices. Nevertheless, the appropriateness and effectiveness of particular methods should be considered with the allowance of the specifics of the investment projects. For example, the investments in dry ports imply not only the lump sum of financial inflows, but also the long-term payback periods. As a result, capital intensity and longevity of their construction determine the necessity from investors to ensure the return on investment (profitability), along with the rapid return on investment (liquidity), without precluding the fact that the stochastic nature of the project environment is hardly described by the formula-based approach. The current theoretical base for the economic appraisals of the dry port projects more often perceives net present value (NPV) as a technique superior to other decision-making criteria. For example, the portfolio theory, which considers different risk preference of an investor and structures of utility, defines net present value as a better criterion of project appraisal than discounted payback period (DPP). Meanwhile, in business practice, the DPP is more popular. Knowing that the NPV is based on the assumptions of certainty of project life, it cannot be an accurate appraisal approach alone to determine whether or not the project should be accepted for the approval in the environment that is not without of uncertainties. In order to reflect the period or the project’s useful life that is exposed to risks due to changes in political, operational, and financial factors, the second capital budgeting criterion – discounted payback period is profoundly important, particularly for the Russian environment. Those statements represent contradictions that exist in the theory and practice of the applied science. Therefore, it would be desirable to relax the assumptions of portfolio theory and regard DPP as not fewer relevant appraisal approach for the assessment of the investment and risk measure. At the same time, the rationality of the use of both project performance criteria depends on the methods and models, with the help of which these appraisal approaches are calculated in feasibility studies. The deterministic methods cannot ensure the required precision of the results, while the stochastic models guarantee the sufficient level of the accuracy and reliability of the obtained results, providing that the risks are properly identified, evaluated, and mitigated. Otherwise, the project performance indicators may not be confirmed during the phase of project realization. For instance, the economic and political instability can result in the undoing of hard-earned gains, leading to the need for the attraction of the additional finances for the project. The sources of the alternative investments, as well as supportive mitigation strategies, can be studied during the initial phases of project development. During this period, the effectiveness of the investments undertakings can also be improved by the inclusion of the various investors, e.g. Russian Railways’ enterprises and other private companies in the dry port projects. However, the evaluation of the effectiveness of the participation of different investors in the project lack the methods and models that would permit doing the particular feasibility study, foreseeing the quantitative characteristics of risks and their mitigation strategies, which can meet the tolerance of the investors to the risks. For this reason, the research proposes a combination of Monte Carlo method, discounted cash flow technique, the theory of real options, and portfolio theory via a system dynamics simulation approach. The use of this methodology allows for comprehensive risk management process of dry port development to cover all aspects of risk identification, risk evaluation, risk mitigation, risk monitoring, and control phases. A designed system dynamics model can be recommended for the decision-makers on the dry port projects that are financed via a public-private partnership. It permits investors to make a decision appraisal based on random variables of net present value and discounted payback period, depending on different risks factors, e.g. revenue risks, land acquisition risks, traffic volume risks, construction hazards, and political risks. In this case, the statistical mean is used for the explication of the expected value of the DPP and NPV; the standard deviation is proposed as a characteristic of risks, while the elasticity coefficient is applied for rating of risks. Additionally, the risk of failure of project investments and guaranteed recoupment of capital investment can be considered with the help of the model. On the whole, the application of these modern methods of simulation creates preconditions for the controlling of the process of dry port development, i.e. making managerial changes and identifying the most stable parameters that contribute to the optimal alternative scenarios of the project realization in the uncertain environment. System dynamics model allows analyzing the interactions in the most complex mechanism of risk management process of the dry ports development and making proposals for the improvement of the effectiveness of the investments via an estimation of different risk management strategies. For the comparison and ranking of these alternatives in their order of preference to the investor, the proposed indicators of the efficiency of the investments, concerning the NPV, DPP, and coefficient of variation, can be used. Thus, rational investors, who averse to taking increased risks unless they are compensated by the commensurate increase in the expected utility of a risky prospect of dry port development, can be guided by the deduced marginal utility of investments. It is computed on the ground of the results from the system dynamics model. In conclusion, the outlined theoretical and practical implications for the management of risks, which are the key characteristics of public-private partnerships, can help analysts and planning managers in budget decision-making, substantially alleviating the effect from various risks and avoiding unnecessary cost overruns in dry port projects.

Building IT architecture for developing nations using TOGAF

Developing nations vary in data usage techniques with respect to developed nations because of lack of standard information technology architecture. With the concept of globalization in the modern times, there is a necessity of information sharing between different developing nations for better advancements in socio-economic and science and technology fields. A robust IT architecture is needed and has to be built between different developing nations which eases information sharing and other data usage methods. A framework like TOGAF may work in this case as a normal IT framework may not fit to meet the requirements of an enterprise architecture. The intention of the thesis is to build an enterprise architecture between different developing nations using a framework TOGAF

Failure modes of passive decay heat removing safety systems of modern nuclear power plants

The purpose of this master’s thesis is to gain an understanding of passive safety systems’ role in modern nuclear reactors projects and to research the failure modes of passive decay heat removal safety systems which use phenomenon of natural circulation. Another purpose is to identify the main physical principles and phenomena which are used to establish passive safety tools in nuclear power plants. The work describes passive decay heat removal systems used in AES-2006 project and focuses on the behavior of SPOT PG system. The descriptions of the main large-scale research facilities of the passive safety systems of the AES-2006 power plant are also included. The work contains the calculations of the SPOT PG system, which was modeled with thermal-hydraulic system code TRACE. The dimensions of the calculation model are set according to the dimensions of the real SPOT PG system. In these calculations three parameters are investigated as a function of decay heat power: the pressure of the system, the natural circulation mass flow rate around the closed loop, and the level of liquid in the downcomer. The purpose of the calculations is to test the ability of the SPOT PG system to remove the decay heat from the primary side of the nuclear reactor in case of failure of one, two, or three loops out of four. The calculations show that three loops of the SPOT PG system have adequate capacity to provide the necessary level of safety. In conclusion, the work supports the view that passive systems could be widely spread in modern nuclear projects.