Las decisiones de proyecto y los costes de construcción en la vivienda rural, aplicado al estudio de la vivienda autopromovida en la provincia de Cáceres

En la coyuntura actual, en la que existe por un lado, exceso en la oferta de vivienda (de alto precio o de segunda residencia), y aparece por otro demanda de vivienda (de bajo precio y/o social), el mercado inmobiliario se encuentra paradójicamente bloqueado. Así, surge esta investigación como fruto de este momento histórico, en el cual se somete a debate económico el producto vivienda, no solo como consecuencia de la profunda crisis económica, sino también para la correcta gestión de los recursos desde el punto de vista de lo eficiente y sostenible. Se parte de la hipótesis de que es necesario determinar un estimador de costes de construcción de vivienda autopromovida como una de las soluciones a la habitación en el medio rural de Extremadura, para lo cual se ha tomado como modelo de análisis concretamente la Vivienda Autopromovida subvencionada por la Junta de Extremadura en el marco de la provincia de Cáceres. Con esta investigación se pretende establecer una herramienta matemática precisa que permita determinar la inversión a los promotores, el posible margen de beneficios a los contratistas y el valor real de la garantía en el préstamo a las entidades financieras. Pero el objetivo de mayor proyección social de esta investigación consiste en facilitar una herramienta sencilla a la Junta de Extremadura para que pueda establecer las ayudas de una manera proporcional. De este modo se ayuda a optimizar los recursos, lo cual en época de crisis resulta aun más acuciante, ya que conociendo previamente y con bastante exactitud el importe de las obras se pueden dirigir las ayudas de forma proporcional a las necesidades reales de la ejecución. De hecho, ciertas características difíciles de cuantificar para determinar las ayudas en materia de vivienda, como la influencia del número de miembros familiares o la atención a la discapacidad, se verían contempladas de forma indirecta en el coste estimado con el método aquí propuesto, ya que suponen siempre un aumento de las superficies construidas y útiles, de los huecos de fachadas o del tamaño de locales húmedos y por tanto se contemplan en la ecuación del modelo determinado. Por último, contar con un estimador de costes potencia la forma de asentamiento de la construcción mediante autopromocion de viviendas ya que ayuda a la toma de decisiones al particular, subvencionado o no. En efecto, la herramienta es valida en cierta medida para cualquier autopromocion, constituye un sistema de construcción con las menores posibilidades especulativas y lo más sostenible, es abundante en toda Extremadura, y consigue que el sector de la construcción sea un sistema más eficiente al optimizar su proceso económico de producción. SUMMARY Under the present circumstances, in which there is, on one hand, an excess in the supply of housing (high-price or second-home), and on the other hand a demand for housing (low cost and/or social), paradoxically the property market is at a standstill. This research has come about as a result of this moment in time, in which the product: housing, is undergoing economic debate, not only on account of this serious economic crisis, but for the proper management of resources from the point of view of efficiency and sustainability. A building-costs estimator for owner-developed housing is deemed necessary as one of the solutions for the rural environment that is Extremadura. To this end, it is the Owner-Developed House which has been taken as analysis model. It is subsidized by the Extremadura Regional Government in Caceres Province. This research establishes an accurate mathematical tool to work out the developers’ investment, the builder’s potential profit margin and the reality of the loan for the Financial Institution. But the result of most social relevance in this research is to provide the Extremadura Regional Government with a simple tool, so that it can draw up the Subventions proportionally. Thus, the resources are optimized, an even more vital matter in times of economic slump, due to the fact that if the cost of the building works is known with some accuracy beforehand, the subventions can be allocated in a way that is proportional to the real needs of execution. In fact certain elements related to housing subventions which are hard to quantify, such as the influence of number of family members or disability support, would be covered indirectly in cost estimate with the proposed method, since they inevitably involve an increase in built area, exterior wall openings and the size of plumbed rooms. As such they are covered in the determined model equation. Lastly, the availability of a cost-estimator reinforces the ownerdeveloped building model, since it assists decision-making by the individual, whether subsidized or not. This is because the tool is valid to some extent in any owner-development, and this building scheme, which is common in Extremadura, is the most sustainable, and the least liable to speculation. It makes the building sector more efficient by optimizing the economic production process.

Metodología para medir los efectos de la aplicación de estándares sobre la industria de los medios de pagos en el mercado chileno

Cada vez juegan un rol más relevante en nuestra vida las tecnologías de información, desde nuestros hogares hasta las empresas y gobiernos acceden a grandes volúmenes de datos e información, las comunicaciones ya no tienen impedimentos de distancias, un comprador y un vendedor puede estar en cualquier lugar, un producto que es adquirido en un comercio en Santiago a través de un medio de pago (tarjeta de crédito) en menos de un segundo la transacción va desde Chile a solicitar autorización en Singapur para ser aprobada. En la sociedad tanto oferentes como demandantes cuentan con información disponible en línea para la toma de decisiones. Existe una mayor apertura e integración económica iniciada con las redes comerciales, donde existen enfoques regionales y multilateral, que han impulsado la apertura del comercio y la integración económica. Son múltiples los tratados de libre comercio que apoyan al desarrollo económico, donde las crisis mundiales han afectado tanto las economías como el transporte, considerando que en el comercio internacional cerca del 90% se desarrolla a través de los puertos, es importante identificar relaciones entre el desarrollo de los medios de pago y el comercio electrónico a través de los puertos. Nuestra investigación busca integrar tanto aspectos de investigación científica como como investigación aplicada, de modo que sea un aporte al día a día de empresas en el sector de los medios de pago en Chile y quienes diseñan y definen la aplicación de normas y estándares. Esta tesis plantea una metodológica para analizar las relaciones entre la aplicación de estándares y sus efectos en la industria de los medios de pago en Chile. Este trabajo de investigación nos permitirá identificar entorno, variables que intervienen y evolución del mercado de los medios de pago, a través de un relevamiento del estado del arte de los medios de Pago en la industria Bancaria chilena. Buscaremos en el mercado de los medios de pago en la industria Chilena - sector Bancario, relaciones entre la aplicación de estándares y sus efectos en los volúmenes transaccionales, analizaremos las tendencias de los medios de pago y el desarrollo comercial del Puerto de Valparaíso. Se busca a través de esta metodológica poder mejorar la toma de decisiones en la industria de los medios de pago en Chile con una mejor gestión y uso de recursos. Every day information technology plays a greater role in our lives, from our homes to businesses, to how governments access large volumes of data and information. Communication is no longer hindered by distances, as a buyer and seller can be anywhere. A product that is purchased in a shop in Santiago through a payment option (credit card) in less than a second, a transaction will request authorization from Chile to Singapore to be approved. In this society both buyers and sellers have access to online information that is available for decision making. There is greater openness and economic integration that has begun within the commercial networks, in which there are regional and multilateral approaches that has helped expand trade and economic integration. Likewise, there are numerous free trade agreements that support economic development; however, the global crisis has affected economies like transportation. In regards to international commerce about 90% is developed through the ports, considering that the former is important to identify the relationships between the development of the payment options and e-commerce at the ports. Our research aims to integrate both the scientific research and applied research aspects, so that this will be a contribution to the day to day business for the payment options in Chile, and for those who design and define the application of norms and standards. This thesis offers a methodology to analyze the relationships between the application of standards and its affects in the industry of payment options in Chile. This research will allow us to identify the environmental variables that intervene and evolve the market of the payment options, through the analysis of the state of the art in the payment options in the Chilean Banking industry. In the market of the payment industry options we have looked specifically at the Chilean Banking industry and the relationship between the application of standards and their impact on transaction volumes. In addition, there has been an analysis of the activity of the payment options and wire transfers in the maritime industry in Valparaíso in order to define the feasibility of a model that allows us to relate these effects in these markets and the application of standards. We have searched the Chilean banking industry for the relationships between the application of standards and its effect on transaction volumes, in order to analyze the trends in the payment options and the commercial development at the Port of Valparaiso. Therefore, through the use of this methodology we look to be able to make better decisions in the payment options industry in Chile, with better management and use of the resources.

Riding out of the storm: How to deal with the complexity of grid and cloud management

Over the last decade, Grid computing paved the way for a new level of large scale distributed systems. This infrastructure made it possible to securely and reliably take advantage of widely separated computational resources that are part of several different organizations. Resources can be incorporated to the Grid, building a theoretical virtual supercomputer. In time, cloud computing emerged as a new type of large scale distributed system, inheriting and expanding the expertise and knowledge that have been obtained so far. Some of the main characteristics of Grids naturally evolved into clouds, others were modified and adapted and others were simply discarded or postponed. Regardless of these technical specifics, both Grids and clouds together can be considered as one of the most important advances in large scale distributed computing of the past ten years; however, this step in distributed computing has came along with a completely new level of complexity. Grid and cloud management mechanisms play a key role, and correct analysis and understanding of the system behavior are needed. Large scale distributed systems must be able to self-manage, incorporating autonomic features capable of controlling and optimizing all resources and services. Traditional distributed computing management mechanisms analyze each resource separately and adjust specific parameters of each one of them. When trying to adapt the same procedures to Grid and cloud computing, the vast complexity of these systems can make this task extremely complicated. But large scale distributed systems complexity could only be a matter of perspective. It could be possible to understand the Grid or cloud behavior as a single entity, instead of a set of resources. This abstraction could provide a different understanding of the system, describing large scale behavior and global events that probably would not be detected analyzing each resource separately. In this work we define a theoretical framework that combines both ideas, multiple resources and single entity, to develop large scale distributed systems management techniques aimed at system performance optimization, increased dependability and Quality of Service (QoS). The resulting synergy could be the key 350 J. Montes et al. to address the most important difficulties of Grid and cloud management.

Concentrating solar power technologies. The DESERTEC megaproject

The European strategies on energy have been searching for years to reduce the dependency of Europe from fossil fuels. Underlying this effort, there exist geopolitical, economic, environmental reasons and the reality that oil reservoirs will dry out some day. Renewable energies have become a milestone of this strategy because their huge potential has emerged after years of uncertainty. One of the better developed renewable sources, which is nearer to commercial maturity is solar-thermal energy. In this paper, the current state of this technology will be described as well as the developments that may be expected in the short and mid terms, including the thermoelectric solar megaproject DESERTEC, a German proposal to ensure energy resources to the mayor areas of the EU-MENA countries. The reader will acquire a picture of the current state of the market, of the technical challenges already achieved and of the remaining ones.

Remote Delivery of Video Services over video links

The spreading of new systems of broadcasting and distribution of multimedia content has had as a consequence a larger need for aggregation of data and metadata to traditionally based contents of video and audio supply. Broadcasting chains of this type of channels have become overwhelmed by the quantity of resources, infrastructures and development needed for these channels to provide information. In order to avoid this kind of shortcomings, several recommendations and standards have been created to exchange metadata between production and distribution of taped programs. The problem lies in live programs, producers sometimes offer data to channels but most often, channels are not able to face required developments. The key to this problem is cost reduction. In this work, a study is conducted on added services which producers may provide to the media about content; a system is found by which additional communication expenses are not made and a model of information transfer is offered which allows low cost developments to supply new media platforms.

4CaaSt: Comprehensive management of Cloud services through a PaaS

The 4CaaSt project aims at developing a PaaS framework that enables flexible definition, marketing, deployment and management of Cloud-based services and applications. The major innovations proposed by 4CaaSt are the blueprint and its management and lifecycle, a one stop shop for Cloud services and the management of resources in the PaaS level (including elasticity). 4CaaSt also provides a portfolio of ready to use Cloud native services and Cloud- aware immigrant technologies.

Decarbonization of toll plazas: impact assessment of toll collection system management

Transport climate change impacts have become a worldwide concern. The use of Intelligent Transport Systems (ITS) could contribute to a more effective use of resources in toll road networks. Management of toll plazas is central to the reduction of greenhouse gas (GHG) emissions, as it is there that bottlenecks and congestion occur. This study focuses on management strategies aimed at reducing climate change impacts of toll plazas by managing toll collection systems. These strategies are based on the use of different collection system technologies – Electronic Toll Collection (ETC) and Open Road Tolling (ORT) – and on queue management. The carbon footprint of various toll plazas is determined by a proposed integrated methodology which estimates the carbon dioxide (CO2) emissions of the different operational stages at toll plazas (deceleration, service time, acceleration, and queuing) for the different toll collection systems. To validate the methodology, two main-line toll plazas of a Spanish toll highway were evaluated. The findings reveal that the application of new technologies to toll collection systems is an effective management strategy from an environmental point of view. The case studies revealed that ORT systems lead to savings of up to 70% of CO2 emissions at toll plazas, while ETC systems save 20% comparing to the manual ones. Furthermore, queue management can offer a 16% emissions savings when queue time is reduced by 116 seconds. The integrated methodology provides an efficient environmental management tool for toll plazas. The use of new technologies is the future of the decarbonization of toll plazas.

Biokerosene from coconut, babassu, camelina and palm kernel oils: production and properties of their blends with fossil kerosene

On December 20th 2006 the European Commission approved a law proposal to include the civil aviation sector in the European market of carbon dioxide emission rights [European Union Emissions Trading System, EUETS). On July 8th 2009, the European Parliament and Conseil agreed that all flights leaving or landing in the EU airports starting from January 1st 2012 should be included in the EUETS. On November 19th 2008, the EU Directive 2008/101/CE [1] included the civil aviation activities in the EUETS, and this directive was transposed by the Spanish law 13/2010 of July 5th 2010 [2]. Thus, in 2012 the aviation sector should reduce their emissions to 97 % of the mean values registered in the period 2004-2006, and for 2013 these emission reductions should reach 95 % of the mean values for that same period. Trying to face this situation, the aviation companies are planning seriously the use of alternative jet fuels to reduce their greenhouse gas emissions and to lower their costs. However, some US airlines have issued a lawsuit before the European Court of Justice based in that this EU action violates a long standing worldwide aviation treaty, the Chicago convention of 1944, and also the Chinese aviation companies have rejected to pay any EU carbon dioxide tax [3]. Moreover, the USA Departments of Agriculture and Energy and the Navy will invest a total of up to $150 million over three years to spur production of aviation and marine biofuels for commercial and military applications [4]. However, the jet fuels should fulfill a set of extraordinarily sensitive properties to guarantee the safety of planes and passengers during all the flights.

Collaborative semantic editing of linked data lexica.

The creation of language resources is a time-consuming process requiring the efforts of many people. The use of resources collaboratively created by non-linguists can potentially ameliorate this situation. However, such resources often contain more errors compared to resources created by experts. For the particular case of lexica, we analyse the case of Wiktionary, a resource created along wiki principles and argue that through the use of a principled lexicon model, namely lemon, the resulting data could be better understandable to machines. We then present a platform called lemon source that supports the creation of linked lexical data along the lemon model. This tool builds on the concept of a semantic wiki to enable collaborative editing of the resources by many users concurrently. In this paper, we describe the model, the tool and present an evaluation of its usability based on a small group of users.

Efficient management of available technologies. Aplication to mining operations for industry supplies

Nowadays, processing Industry Sector is going through a series of changes, including right management and reduction of environmental affections. Any productive process which looks for sustainable management is incomplete if Cycle of Life of mineral resources sustainability is not taken into account. Raw materials for manufacturing are provided by mineral resources extraction processes, such as copper, aluminum, iron, gold, silver, silicon, titanium? Those elements are necessary for Mankind development and are obtained from the Earth through mineral extractive processes. Mineral extraction processes are operations which must take care about the environmental consequences. Extraction of huge volumes of rock for their transformation into raw materials for industry must be optimized to reduce ecological cost of the final product as l was possible. Reducing the ecological balance on a global scale has no sense to design an efficient manufacturing in secondary industry (transformation), if in first steps of the supply chain (extraction) impact exceeds the savings of resources in successive phases. Mining operations size suggests that it is an environmental aggressive activity, but precisely because of its great impact must be the first element to be considered. That idea implies that a new concept born: Reduce economical and environmental cost This work aims to make a reflection on the parameters that can be modified to reduce the energy cost of the process without an increasing in operational costs and always ensuring the same production capacity. That means minimize economic and environmental cost at same time. An efficient design of mining operation which has taken into account that idea does not implies an increasing of the operating cost. To get this objective is necessary to think in global operation view to make that all departments involved have common guidelines which make you think in the optimization of global energy costs. Sometimes a single operational cost must be increased to reduce global cost. This work makes a review through different design parameters of surface mining setting some key performance indicators (KPIs) which are estimated from an efficient point of view. Those KPIs can be included by HQE Policies as global indicators. The new concept developed is that a new criteria has to be applied in company policies: improve management, improving OPERATIONAL efficiency. That means, that is better to use current resources properly (machinery, equipment,?) than to replace them with new things but not used correctly. As a conclusion, through an efficient management of current technologies in each extractive operation an important reduction of the energy can be achieved looking at downstream in the process. That implies a lower energetic cost in the whole cycle of life in manufactured product.

Empleo de materiales reciclados para centros educativos en Chile

Los objetivos de este proyecto son dobles. El primero a conseguir es el acondicionamiento acústico de un centro educativo para alcanzar un mayor rendimiento docente; lo que se pretende lograr mejorando la inteligibilidad de la palabra y reduciendo el ruido en los diferentes recintos. El segundo objetivo, es la reducción de los costos económicos y medioambientales del proyecto empleando en el acondicionamiento acústico materiales procedentes del reciclado o existentes en el entorno local, reduciendo lo mayor posible la importación de estos materiales. Desde la investigación de las exigencias acústicas de un centro educativo, se determinarán los parámetros adecuados para su diseño óptimo. En general los mayores problemas acústicos existentes en estos establecimientos, son debidos a la transferencia de ruido entre los diferentes recintos y su excesiva reverberación, lo que provoca dificultades en la transmisión de la palabra y por ende también en las actividades docentes y los objetivos educativos. Asimismo, los parámetros y exigencias acústicas planteadas y desarrolladas, serán estudiados a partir de un contexto real y específico. El lugar elegido para el caso de estudio, será la ciudad de Santiago de Chile. Es importante, aclarar que en este país no existe una normativa aplicable a este tipo de establecimientos, por tanto se planteará el aislamiento acústico y posterior acondicionamiento a partir de normas y requisitos internacionales. Además, las soluciones acústicas planteadas serán de materiales reciclados existentes en el mercado nacional. Esta decisión tiene como finalidad reducir la afección al medio ambiente fomentando el desarrollo ecológico y sostenible como respuesta al crecimiento económico y la conservación de recursos en un país que se encuentra en vías de desarrollo. Por último, se plantea el acondicionamiento acústico de los diferentes recintos del colegio en proyecto, mediante simulación acústica en el programa EASE (Enhanced Acoustic Simulator for Engineers), lo que nos permite conocer el comportamiento de los recintos antes y después del acondicionamiento acústico. SUMMARY The objective of this Project is twofold. On the one hand, the acoustic conditioning of a school is developed in order to achieve a better teaching performance. For this purpose, the speech intelligibility is enhanced and the noise in the different rooms is reduced. On the other hand, the economic costs and environmental impact are reduced by using recycled materials or materials found in the local area, reducing as much as possible the use of imported materials. The appropriate acoustic parameters will be determined from the evaluation of the acoustic demands of the school. The main problems in these environments are the noise transmission between rooms as well as a high reverberation time. These will cause problems with the speech transmission, which is of great importance for educational purposes. Furthermore, the acoustic parameters and requirements are taken from a real and specific context. The place chosen for the research is Santiago, Chile. It is remarkable that in this country there is no national legislation that can be applied to such places, therefore International Standards are considered to evaluate the acoustic insulation and conditioning. The acoustic solutions considered in this project come from recycled materials existing on the domestic market. The decision aims to reduce the environmental impact, promoting environmentally sustainable development as a response to the economic growth and the maintenance of resources in a developing country. Finally, a simulation at some different areas of the school is carried out, comparing the behaviour before and after the proposed acoustic solutions. The software used for the simulations is EASE (Enhanced Acoustic Simulator for Engineers).

Airplane materials compatibility with blends of fossil kerosene JET A1 with biokerosenes from babassu, palm kernel and coconut oils

The aviation companies are facing some problems that argue in favor of biofuels: Rising cost of traditional fuel: from 0.71 USD/gallon in May 2003 to 3.09 USD/gallon in January 2012. Environmental concerns: direct emissions from aviation account for about 3 % of the EU’s total greenhouse gas emissions. The International Civil Aviation Organization (ICAO) forecasts that by 2050 they could grow by a further 300-700 %. On December 20th 2006 the European Commission approved a law proposal to include the civil aviation sector in the European market of carbon dioxide emission rights (European Union Emissions Trading System, EUETS)

Empirical analysis of traffic volume for the application of the options theory to highway concessions

*************************************************************************************** EL WCTR es un Congreso de reconocido prestigio internacional en el ámbito de la investigación del transporte que hasta el 2010 publicaba sus libros de abstracts con ISBN. Por ello consideramos que debería seguir teníendose en cuenta para los indicadores de calidad ******************************************************************************************* Investment projects in the field of transportation infrastructures have a high degree of uncertainty and require an important amount of resources. In highway concessions in particular, the calculation of the Net Present Value (NPV) of the project by means of the discount of cash flows, may lead to erroneous results when the project incorporates certain flexibility. In these cases, the theory of real options is an alternative tool for the valuation of concessions. When the variable that generates uncertainty (in our case, the traffic) follows a random walk (or Geometric Brownian Motion), we can calculate the value of the options embedded in the contract starting directly from the process followed by that variable. This procedure notably simplifies the calculation method. In order to test the hypothesis of the evolution of traffic as a Geometric Brownian Motion, we have used the available series of traffic in Spanish highways, and we have applied the Augmented Dickey-Fuller approach, which is the most widely used test for this kind of study. The main result of the analysis is that we cannot reject the hypothesis that traffic follows a Geometric Brownian Motion in the majority of both toll highways and free highways in Spain.

Analysis of advanced European nuclear fuel cycle scenarios including transmutation and economic estimates

Four European fuel cycle scenarios involving transmutation options (in coherence with PATEROS and CPESFR EU projects) have been addressed from a point of view of resources utilization and economic estimates. Scenarios include: (i) the current fleet using Light Water Reactor (LWR) technology and open fuel cycle, (ii) full replacement of the initial fleet with Fast Reactors (FR) burning U?Pu MOX fuel, (iii) closed fuel cycle with Minor Actinide (MA) transmutation in a fraction of the FR fleet, and (iv) closed fuel cycle with MA transmutation in dedicated Accelerator Driven Systems (ADS). All scenarios consider an intermediate period of GEN-III+ LWR deployment and they extend for 200 years, looking for long term equilibrium mass flow achievement. The simulations were made using the TR_EVOL code, capable to assess the management of the nuclear mass streams in the scenario as well as economics for the estimation of the levelized cost of electricity (LCOE) and other costs. Results reveal that all scenarios are feasible according to nuclear resources demand (natural and depleted U, and Pu). Additionally, we have found as expected that the FR scenario reduces considerably the Pu inventory in repositories compared to the reference scenario. The elimination of the LWR MA legacy requires a maximum of 55% fraction (i.e., a peak value of 44 FR units) of the FR fleet dedicated to transmutation (MA in MOX fuel, homogeneous transmutation) or an average of 28 units of ADS plants (i.e., a peak value of 51 ADS units). Regarding the economic analysis, the main usefulness of the provided economic results is for relative comparison of scenarios and breakdown of LCOE contributors rather than provision of absolute values, as technological readiness levels are low for most of the advanced fuel cycle stages. The obtained estimations show an increase of LCOE ? averaged over the whole period ? with respect to the reference open cycle scenario of 20% for Pu management scenario and around 35% for both transmutation scenarios. The main contribution to LCOE is the capital costs of new facilities, quantified between 60% and 69% depending on the scenario. An uncertainty analysis is provided around assumed low and high values of processes and technologies.

Los residuos de envases y embalajes en edificación residencial. Patrones de generación y estrategias de mejora de su gestión

Uno de los retos a los que se enfrenta la humanidad es la demanda de una sociedad con casi cero residuos: la búsqueda de una economía más eficiente en el uso de los recursos teniendo en cuenta el cambio climático y un abastecimiento sostenible de materias primas que permitan satisfacer las necesidades de una población mundial cada vez mayor, dentro de los límites sostenibles de los recursos naturales del planeta. Abordar este desafío implica la recuperación y reciclaje de materiales para reducir consumos de materias primas y, para ello, debe promoverse la innovación en la prevención y gestión de residuos, como estrategia hacia un desarrollo urbano sostenible. Los envases y embalajes forman parte de la cultura actual, relacionándose con el grado de desarrollo de países y regiones; el sector de la construcción no es ajeno a la problemática y genera un importante volumen de embalajes en las obras que no se gestionan de forma adecuada. El modelo de gestión de Residuos de Construcción Demolición (RCD) actual es poco eficaz, ya que los vertederos siguen recibiendo grandes cantidades de residuos valorizables. La normativa ha conseguido minimizar las prácticas ilegales, pero se comprueba que la gestión actual de los RCD en obra deja en manos de las plantas de tratamiento la misión de separar los residuos según su naturaleza y los datos aportados por las distintas plantas no permiten afirmar el grado de alcance de dicho objetivo, ni el destino de los mismos. Los envases y embalajes son un tipo de residuos que por su naturaleza suponen una fuente de recursos valorizables y por ello están presentes en directivas y leyes, dirigidas fundamentalmente al sector de la alimentación. En el ámbito de la construcción, hasta la fecha, no se habían tratado de forma específica, motivo que justifica este trabajo. Esta Tesis Doctoral tiene como objetivo principal mejorar la gestión de residuos de embalajes procedentes de materiales de construcción. Para ello se estudia un importante conjunto de obras de edificación residencial colectiva de 1173 viviendas, análisis que llevará a conocer los patrones de producción de los Residuos de Envases y Embalajes en Construcción (REEC) e identificar los productos o materiales responsables de su generación. La monitorización realizada, permitirá diseñar estrategias específicas que minimicen la generación de estos residuos y optimicen su valorización. Se ha podido comprobar que el tratamiento particularizado de los REEC puede mejorar los resultados de la gestión del conjunto de RCD, debido a que, al no mezclarse, se elimina un importante agente contaminador de los residuos inertes. Las obras analizadas alcanzan un nivel de segregación in situ muy bajo, y los capítulos de cerramientos e instalaciones suman más del 50% del global de REEC. Particularizando en cada tipo de material, el cartón predomina en los trabajos de electricidad, el plástico en las particiones y la madera en fachadas. Se evalúa la opción del eco-­‐rediseño para uno de los embalajes predominantes, y se identifican estrategias para minimizar su impacto. Se comprueba que el ahorro en la gestión de RCD en caso de impulsar la segregación in situ no es muy significativo en las obras estudiadas, si bien se demuestra que la viabilidad económica es el factor más importante para motivar a las empresas constructoras. Las Administraciones Públicas deberían incentivar la gestión responsable, estableciendo medidas de control en las plantas de tratamiento e implementando en sus obras medidas de gestión de RCD ejemplares para el mercado. Una adecuada planificación de la obra, y formación específica para el personal son medidas que facilitan la segregación in situ y mejoran los resultados. Los promotores, mediante su relación contractual con el resto de agentes, tienen la capacidad de establecer objetivos de reducción, planificación y gestión sostenible de los REEC. Por último, se propone un sistema de gestión de REEC, integrable dentro del Sistema de Gestión de la empresa constructora, que permite evitar que residuos valorizables tales como los envases y embalajes se envíen a vertedero, guiando al sector hacia un futuro más respetuoso, alineado con el desarrollo sostenible. ABSTRACT One of the challenges humanity faces is the demand of an almost zero waste society: the search for a more efficient economy in the use of resources, taking into account climate change and a sustainable supply of raw materials, that meet the needs of an increasing world population within the sustainable limits of the planet's natural resources. Addressing this challenge involves the recovery and recycling of materials to reduce consumption of raw materials, so innovation must therefore be promoted in the prevention and management of waste, as a strategy towards a sustainable urban development. Packaging is part of our current culture and is related to the degree of development of countries and regions; the construction sector is no stranger to this problem and generates a significant amount of packaging waste in the site works, which nowadays is not managed properly. The current Construction Demolition Waste (CDW) management model is ineffective, since landfills continue to receive large amounts of recoverable waste. The legislation has managed to minimize illegal practices, but it has been observed that the current management of CDW in the analysed works leaves the mission of separating waste according to their nature to the plants, and data provided by the latter does not allow for checking the scope of this objective, nor the destiny of the waste. Packaging is a type of waste which, by its nature, represents a source of recoverable resources and is therefore present in directives and laws, focused primarily on the food industry. It has not been specifically treated to date in the construction field, hence the reason that justifies this work. This Thesis aims to improve the management of packaging waste from construction materials. An important set of residential building works with 1173 dwellings is analysed, which leads to knowledge on the production patterns of packaging waste (PW) in the construction industry, and the identification of the products responsible for its generation. The monitorization also allows for the design of specific strategies which minimise the generation of waste and optimize recovery. It has been found that the individualized treatment of PW can improve the results of the management of the whole CDW since, when not mixed, a major pollutant of inert waste is removed. The analysed works reached a very low segregation level and the façades and building services phases account for more than 50% of the overall PW. Focusing on each type of material, cardboard predominates electricity works, plastic on partitions and wood on façades. Eco-­‐redesign is evaluated for one of the predominant packages, and strategies are identified to minimise their impact are . There is evidence that the savings in the CDW management in case of promoting segregation on site are not very significant at the studied works, although economic feasibility is the most important factor to motivate the construction companies. Public Administrations should encourage responsible management, establishing control measures in treatment plants and implementing CDW management exemplary measures on their work sites for the market. A proper planning of the works and specific training for the personnel are measures that facilitate in situ segregation and improve outcomes. The developers, through their contractual relationship with the other agents, have the ability to set reduction targets, planning and sustainable management of PW. Finally, a management system for PW is proposed, integrated within the Management System of the construction company, which aims to avoid that recoverable waste such as packaging is sent to landfill, leading the industry towards a more environmentally friendly future, aligned with sustainable development.