AVALIAÇÃO TOMOGRÁFICA DA ANGULAÇÃO DOS PRIMEIROS E SEGUNDOS MOLARES E DO ESPAÇO PARA O TERCEIRO MOLAR SUPERIOR APÓS O USO DO APARELHO FORSUS®.

A presente pesquisa avaliou a angulação mésio-distal e a distalização dos primeiros e dos segundos molares superiores permanentes em pacientes tratados com o aparelho Forsus® em conjunto com o aparelho ortodôntico fixo. A amostra foi composta por 44 teleradiografias, (22 do lado direito e 22 do lado esquerdo), obtidas por meio de 11 tomografias computadorizadas, de 11 pacientes, realizadas em dois tempos: antes (T1) e após (T2) a instalação do aparelho Forsus®, tratados na clínica de Pós-Graduação em Odontologia, área de Ortodontia, da Universidade Metodista de São Paulo. Após a obtenção dos cortes tipo telerradiografia, foi realizada a marcação dos pontos, linhas e planos, e realizada a mensuração das variáveis de interesse. Para avaliação do espaço para os terceiros molares superiores, utilizou-se uma linha referencial (linha PTVR), demarcada a partir do ponto PTV, perpendicular ao plano de Frankfurt. O espaço avaliado compreendeu entre a Linha PTVR, até a face distal do primeiro molar e do segundo superior permanente. Para avaliar o longo eixo dos primeiros e segundos molares superiores, mensurou-se o ângulo formado entre esses dentes e o plano palatino. Para auxílio das mensurações, foi utilizado o software Radiocef Studio 2. Na análise estatística usou-se o teste t pareado. Concluiu-se que houve distalização e aumento da angulação distal dos primeiros e segundos molares superiores, sendo que nos segundos molares a distalização e angulação distal da coroa ocorreram em menor quantidade; os efeitos do lado direito e esquerdo foram semelhantes; pode-se também constatar que ocorreu uma redução na probabilidade de erupção dos terceiros molares superiores.

Percepção dos Ortodontistas quanto à época ideal para o tratamento ortodôntico da má oclusão de Classe II de Angle.

O objetivo deste estudo foi verificar, por meio de questionário, a percepção dos ortodontistas quanto a época ideal para o tratamento ortodôntico da má oclusão de Classe II de Angle, avaliar a eficiência deste tipo de tratamento em uma ou duas fases e identificar os diversos métodos de tratamento utilizados. A amostra constituiu de 163 ortodontistas brasileiros que responderam ao questionário via e-mail. O questionário continha perguntas do tipo aberta, semi aberta e fechada, e, para sua validação, foi realizado um teste piloto entre 15 ortodontistas, participantes ou ex-alunos do Programa de Pós-graduação em Odontologia da Universidade Metodista de São Paulo, que não foram inclusos neste trabalho. Os dados foram tabulados com a utilização de frequência absoluta (n) e frequência relativa (%). Para verificar a correlação entre as variáveis ordinais foi utilizado o Coeficiente de Correlação de Spearman. Para verificar a associação entre variáveis qualitativas nominais foi utilizado o teste do qui-quadrado. Em todos os testes foi adotado nível de significância de 5% (p<0,05). Todos os procedimentos estatísticos foram executados no programa Statistica v.5.1 (StatSoft Inc., Tulsa, USA). Observou-se que os ortodontistas brasileiros preferem tratar os pacientes portadores da má oclusão de Classe II durante a fase da dentadura mista tardia, onde a procura por tratamentos nos consultórios e/ou clínicas tem maior ocorrência entre 10 a 13 anos e no sexo feminino. Dentre as modalidades de tratamento, verificou-se que 25 a 50% dos profissionais tratam seus pacientes em duas fases, seja na utilização do Aparelho Extra Bucal (49,1%), Bionator (33,1%) ou propulsores mandibulares, como APM (17,8%), e, Elásticos Classe II (8,6%).

AVALIAÇÃO TOMOGRÁFICA DA INCLINAÇÃO E DAS TÁBUAS ÓSSEAS VESTIBULAR E LINGUAL DE INCISIVOS NO TRATAMENTO DA CLASSE II DIVISÃO 1 COM O APARELHO FORSUS®

O objetivo deste estudo prospectivo foi avaliar os efeitos do aparelho Forsus® nos incisivos centrais superiores e inferiores. A amostra constituiu-se de 22 tomografias computadorizadas de 11 pacientes (sexo masculino e feminino) idade média de 15,8 anos com má oclusão de Classe II que foram tratados com o aparelho Forsus® na clínica do programa de pós-graduação em Odontologia, área de concentração Ortodontia, da Universidade Metodista de São Paulo. As tomografias foram obtidas em dois momentos T1 (final de nivelamento e antes da instalação do Forsus® e T2 (remoção do Forsus®). Para avaliar a distância do ápice até a tábua óssea, as imagens a serem examinadas foram obtidas com o auxílio do viewer do próprio i-CAT® , o iCATVision® e examinadas com o CorelDRAW X5® já para as medidas cefalométricas IMPA e 1.PP as imagens cefalométricas ortogonais foram obtidas em proporção 1:1 com auxílio do software Dolphin 3D® (Dolphin Imaging and Management Solutions, Chatsworth, EUA) e em seguida examinadas com o software Radiocef Studio 2 (Radio Memory, Belo Horizonte, Brasil). Para a obtenção do erro intra-examinador foi feito o teste t de Student pareado para o erro sistemático e a fórmula de DAHLBERG para estimar a ordem de grandeza dos erros casuais e na análise estatística dos resultados utilizou-se: o teste t para a determinação das diferenças entres as fases de observação e o teste de correlação de Pearson para avaliar a correlação entres as alterações. Observou-se: um aumento significativo (p<0,05) tanto no IMPA quanto no 1.PP, aproximação do ápice dos incisivos inferiores da tábua óssea lingual, aproximação do ápice dos incisivos superiores da tábua óssea vestibular, uma correlação negativa muito forte entre o IMPA e a distância do ápice do incisivo até a tábua óssea lingual e uma correlação negativa moderada entre 1.PP e a distância do ápice do incisivo até a tábua óssea vestibular. Sendo assim o aparelho Forsus® no tratamento da Classe II teve como efeito: vestibularização significativa dos incisivos centrais inferiores, uma verticalização significativa dos incisivos centrais superiores, aproximação do ápice dos incisivos inferiores da cortical óssea lingual e aproximação do ápice dos incisivos superiores da cortical óssea vestibular.

AVALIAÇÃO DO COMPRIMENTO DA COROA CLÍNICA DOS DENTES ÂNTERO-INFERIORES EM PACIENTES TRATADOS COM APARELHO REGULADOR DE FUNÇÃO FRÄNKEL-2

O objetivo do estudo consistiu em verificar uma possível alteração no tamanho da coroa clínica dos dentes ântero-inferiores em 50 indivíduos portadores de má Oclusão de Angle Classe II. A amostra foi dividida em 2 grupos: um grupo tratado com 25 indivíduos (14 do sexo masculino e 11 do feminino) com idade média em T1 (tempo inicial do tratamento) de 11 anos (dp = 9 meses), e em T2 (tempo pós-tratamento) de 12 anos e 7 meses (dp = 7 meses), tratados com o aparelho regulador de função Fränkel-2, durante 18 meses; e, um grupo controle com 25 indivíduos (12 do sexo masculino e 13 do feminino) com idade média em T1 de 10 anos e 3 meses (dp = 11 meses) e em T2 de 12 anos e 1 mês (dp = 11 meses). Os 100 modelos em gesso dos indivíduos foram analisados e comparados em relação ao início e ao término do tratamento por meio de um paquímetro digital, utilizando-se como medida a distância da borda incisal até a porção mais côncava da margem gengival dos incisivos e caninos inferiores. Os dados foram analisados por meio do teste t de Student e teste t pareado. Dentre os seis dentes ântero-inferiores, todos apresentaram aumento significante no grupo tratado, e apenas três dentes (33,42 e 43) apresentaram aumento significante no grupo controle. Já em relação ao grupo tratado e o grupo controle em T2, houve um aumento significante da coroa nos dentes 32, 33 e 43. Houve um aumento estatisticamente significante em apenas dois dentes (31 e 41) em ambos os sexos. Os resultados não demonstraram relevância estatística quando comparados com a alteração do tamanho da coroa no decorrer da idade. Conclui-se que as medidas das coroas clínicas dos dentes diferiram entre os grupos, sendo maior no grupo tratado. O aumento da coroa clinica dos dentes, não esta relacionado somente pela presença de inclinação para vestibular dos mesmo, mas pode ser considerado como multifatorial.

Reduction of noise levels in vaccum cleaners

The work described in this thesis is directed towards the reduction of noise levels in the Hoover Turbopower upright vacuum cleaner. The experimental work embodies a study of such factors as the application of noise source identification techniques, investigation of the noise generating principles for each major source and evaluation of the noise reducing treatments. It was found that the design of the vacuum cleaner had not been optimised from the standpoint of noise emission. Important factors such as noise `windows', isolation of vibration at the source, panel rattle, resonances and critical speeds had not been considered. Therefore, a number of experimentally validated treatments are proposed. Their noise reduction benefit together with material and tooling costs are presented. The solutions to the noise problems were evaluated on a standard Turbopower and the sound power level of the cleaner was reduced from 87.5 dB(A) to 80.4 db(A) at a cost of 93.6 pence per cleaner.The designers' lack of experience in noise reduction was identified as one of the factors for the low priority given to noise during design of the cleaner. Consequently, the fundamentals of acoustics, principles of noise prediction and absorption and guidelines for good acoustical design were collated into a Handbook and circulated at Hoover plc.Mechanical variations during production of the motor and the cleaner were found to be important. These caused a vast spread in the noise levels of the cleaners. Subsequently, the manufacturing processes were briefly studied to identify their source and recommendations for improvement are made.Noise of a product is quality related and a high level of noise is considered to be a bad feature. This project suggested that the noise level be used constructively both as a test on the production line to identify cleaners above a certain noise level and also to promote the product by `designing' the characteristics of the sound so that the appliance is pleasant to the user. This project showed that good noise control principles should be implemented early in the design stage.As yet there are no mandatory noise limits or noise-labelling requirements for household appliances. However, the literature suggests that noise-labelling is likely in the near future and the requirement will be to display the A-weighted sound power level. However, the `noys' scale of perceived noisiness was found more appropriate to the rating of appliance noise both as it is linear and therefore, a sound level that seems twice as loud is twice the value in noys and also takes into consideration the presence of pure tones, which even in the absence of a high noise level can lead to annoyance.

Deficient inhibition of return in subclinical OCD only when attention is directed to the threatening aspects of a stimulus

Background - Inhibition of return (IOR) is thought to reflect inhibition of previously attended but irrelevant stimuli. Deficient IOR would increase the likelihood of revisiting previously searched locations or objects, thus leading to unproductive perseverations. Method - Therefore, using a novel IOR task, we investigated whether high scoring checkers attentional biases to threat would result in dysfunctional inhibitory functioning compared to low checkers. In two tasks, we compared 53 subclinical high and 49 low checkers regarding IOR effects for stimuli that were concordant with the concerns of high but not of low checkers (electrical kitchen appliances: e.g., toaster, kettle). The difference between the two tasks was the cueing procedure. In one task, an appliance was switched “ON” and “OFF” as an unpredictive cue, drawing attention to the functionality of the stimulus. Results - In this task, IOR was specifically attenuated in high checkers. In the other task, however, the cue was more abstract in form of a yellow outline that appeared around one of two appliances. Although the appliance was either “ON” or “OFF,” this did not seem to matter and high checkers revealed a typical IOR pattern similar to low checkers. Conclusions - We conclude that IOR mechanisms might not be generally deficient in high checkers; rather only when attention is drawn to the threatening aspects of ecologically valid stimuli, then disengagement of attention is deficient in high checkers. We make suggestions on how our task-specific findings may inform cognitive interventions that target attentional control in the treatment of checking/obsessive–compulsive disorder.

Integrated assessment of water conservation practices for sustainable management strategies

Miami-Dade County implemented a series of water conservation programs, which included rebate/exchange incentives to encourage the use of high efficiency aerators (AR), showerheads (SH), toilets (HET) and clothes washers (HEW), to respond to the environmental sustainability issue in urban areas. This study first used panel data analysis of water consumption to evaluate the performance and actual water savings of individual programs. Integrated water demand model has also been developed for incorporating property’s physical characteristics into the water consumption profiles. Life cycle assessment (with emphasis on end-use stage in water system) of water intense appliances was conducted to determine the environmental impacts brought by each practice. Approximately 6 to 10 % of water has been saved in the first and second year of implementation of high efficiency appliances, and with continuing savings in the third and fourth years. Water savings (gallons per household per day) for water efficiency appliances were observed at 28 (11.1%) for SH, 34.7 (13.3%) for HET, and 39.7 (14.5%) for HEW. Furthermore, the estimated contributions of high efficiency appliances for reducing water demand in the integrated water demand model were between 5 and 19% (highest in the AR program). Results indicated that adoption of more than one type of water efficiency appliance could significantly reduce residential water demand. For the sustainable water management strategies, the appropriate water conservation rate was projected to be 1 to 2 million gallons per day (MGD) through 2030. With 2 MGD of water savings, the estimated per capita water use (GPCD) could be reduced from approximately 140 to 122 GPCD. Additional efforts are needed to reduce the water demand to US EPA’s “Water Sense” conservation levels of 70 GPCD by 2030. Life cycle assessment results showed that environmental impacts (water and energy demands and greenhouse gas emissions) from end-use and demand phases are most significant within the water system, particularly due to water heating (73% for clothes washer and 93% for showerhead). Estimations of optimal lifespan for appliances (8 to 21 years) implied that earlier replacement with efficiency models is encouraged in order to minimize the environmental impacts brought by current practice.

Epítese gengival removível: alternativa estética e de rápida resolução para repor tecidos periodontais anteriores

The gingiva, part of the masticatory mucosa tissue that covers the alveolar process and surrounds the cervical portion of teeth, has a definitive shape and texture associated with the eruption of teeth. Therefore, it must be included in rehabilitative planning, as the absence of papillae induces problems with esthetics, phonetics and food-impaction. The purpose of the present study was to approach the indications, limitations and techniques for making a removable artificial gingiva made of acrylic resin, by reporting on a clinical case. The patient, a 29-year-old woman, with the sequelae of periodontal disease, presented loss of interdental papilla causing “black holes”. She was dissatisfied with the esthetic appearance of her teeth, and also complained of long teeth and air escaping when she spoke. As treatment, prosthetic reconstruction was proposed, by means of a removable artificial gingiva (gingival epithesis) to simulate the presence of interdental papillae, providing better esthetics and phonetics. Gingival epithesis is an easily made, inserted and hygienically cleaned appliance that provides a simple and safe alternative solution for cases in which surgical techniques are limited.

Epítese gengival removível: alternativa estética e de rápida resolução para repor tecidos periodontais anteriores

The gingiva, part of the masticatory mucosa tissue that covers the alveolar process and surrounds the cervical portion of teeth, has a definitive shape and texture associated with the eruption of teeth. Therefore, it must be included in rehabilitative planning, as the absence of papillae induces problems with esthetics, phonetics and food-impaction. The purpose of the present study was to approach the indications, limitations and techniques for making a removable artificial gingiva made of acrylic resin, by reporting on a clinical case. The patient, a 29-year-old woman, with the sequelae of periodontal disease, presented loss of interdental papilla causing “black holes”. She was dissatisfied with the esthetic appearance of her teeth, and also complained of long teeth and air escaping when she spoke. As treatment, prosthetic reconstruction was proposed, by means of a removable artificial gingiva (gingival epithesis) to simulate the presence of interdental papillae, providing better esthetics and phonetics. Gingival epithesis is an easily made, inserted and hygienically cleaned appliance that provides a simple and safe alternative solution for cases in which surgical techniques are limited.

Sistema inteligente para o processamento de imagens digitais intrabucais oclusais

Several are the areas in which digital images are used in solving day-to-day problems. In medicine the use of computer systems have improved the diagnosis and medical interpretations. In dentistry it’s not different, increasingly procedures assisted by computers have support dentists in their tasks. Set in this context, an area of dentistry known as public oral health is responsible for diagnosis and oral health treatment of a population. To this end, oral visual inspections are held in order to obtain oral health status information of a given population. From this collection of information, also known as epidemiological survey, the dentist can plan and evaluate taken actions for the different problems identified. This procedure has limiting factors, such as a limited number of qualified professionals to perform these tasks, different diagnoses interpretations among other factors. Given this context came the ideia of using intelligent systems techniques in supporting carrying out these tasks. Thus, it was proposed in this paper the development of an intelligent system able to segment, count and classify teeth from occlusal intraoral digital photographic images. The proposed system makes combined use of machine learning techniques and digital image processing. We first carried out a color-based segmentation on regions of interest, teeth and non teeth, in the images through the use of Support Vector Machine. After identifying these regions were used techniques based on morphological operators such as erosion and transformed watershed for counting and detecting the boundaries of the teeth, respectively. With the border detection of teeth was possible to calculate the Fourier descriptors for their shape and the position descriptors. Then the teeth were classified according to their types through the use of the SVM from the method one-against-all used in multiclass problem. The multiclass classification problem has been approached in two different ways. In the first approach we have considered three class types: molar, premolar and non teeth, while the second approach were considered five class types: molar, premolar, canine, incisor and non teeth. The system presented a satisfactory performance in the segmenting, counting and classification of teeth present in the images.

Sistema inteligente para o processamento de imagens digitais intrabucais oclusais

Several are the areas in which digital images are used in solving day-to-day problems. In medicine the use of computer systems have improved the diagnosis and medical interpretations. In dentistry it’s not different, increasingly procedures assisted by computers have support dentists in their tasks. Set in this context, an area of dentistry known as public oral health is responsible for diagnosis and oral health treatment of a population. To this end, oral visual inspections are held in order to obtain oral health status information of a given population. From this collection of information, also known as epidemiological survey, the dentist can plan and evaluate taken actions for the different problems identified. This procedure has limiting factors, such as a limited number of qualified professionals to perform these tasks, different diagnoses interpretations among other factors. Given this context came the ideia of using intelligent systems techniques in supporting carrying out these tasks. Thus, it was proposed in this paper the development of an intelligent system able to segment, count and classify teeth from occlusal intraoral digital photographic images. The proposed system makes combined use of machine learning techniques and digital image processing. We first carried out a color-based segmentation on regions of interest, teeth and non teeth, in the images through the use of Support Vector Machine. After identifying these regions were used techniques based on morphological operators such as erosion and transformed watershed for counting and detecting the boundaries of the teeth, respectively. With the border detection of teeth was possible to calculate the Fourier descriptors for their shape and the position descriptors. Then the teeth were classified according to their types through the use of the SVM from the method one-against-all used in multiclass problem. The multiclass classification problem has been approached in two different ways. In the first approach we have considered three class types: molar, premolar and non teeth, while the second approach were considered five class types: molar, premolar, canine, incisor and non teeth. The system presented a satisfactory performance in the segmenting, counting and classification of teeth present in the images.

Morfometria dos forames mandibular, mentual e infraorbital de Lobo-guará Chrysocyon brachyurus, Illiger, 1815 aplicada a bloqueios anestésicos

CHAPTER II - The Chrysocyon brachyurus is the biggest South American canid which has a high frequency of dental injuries, both in wild and captivity. Thus, veterinary procedures are necessary to preserve the feeding capacity of hundreds of captive specimens worldwide. The aim of this study was to study the mandibular morphometry of maned wolf with emphasis on the establishment of anatomic references to the anesthetic blockage of the inferior alveolar and mental nerves. Therefore, 15 measurements in 22 hemimandibles of C. brachyurus adults were taken. For extra-oral technique of blockage of the inferior alveolar nerve at the level of the mandibular foramen, it is stated that the needle should be advanced, close to the medial surface of the mandibular ramus, by 11.4 mm perpendiculary from the palpable concavity. Alternatively, the needle can be introduced for 30.4 mm from the angular process at 20-25 degrees angle with the ventral margin. For blocking only the mentual nerve, it is recommended the introduction of needle for 10 mm, close to the lateral aspect of the mandibular body, at the level of the lower first premolar. The mandibular foramen showed similars position, size and symmetry in the maned wolfs specimens examined. The comparison of the data with those available for other carnivores reflects the necessity for determining these anatomical references specifically for each species.

Bioengineering of nisin to enhance functionality against dairy pathogens

The bacteriocin class of antimicrobial peptides have emerged as a viable alternative to at least partially fill the void created by the end of the golden age of antibiotic discovery. Along with this potential use in a clinical setting, bacteriocins also play an important role as bio-preservatives in the food industry. This thesis focuses on a specific bacteriocin group, the lantibiotics (Lanthionine-containing antibiotics). Their numerous methods of appliance in a food setting and how their gene-encoded nature can be modified to improve on overall bioactivity and functionality are explored here. The use of a lantibiotic (lacticin 3147) producing starter culture to control the Crohn’s disease-linked pathogen Mycobacterium paratuberculosis was assessed in a raw milk cheese. Although lacticin 3147 production did not effectively control the pathogen, the study provided an impetus to employ a variety of PCR-based mutagenesis techniques with a view to the creation of enhanced lantibiotic derivatives. Through the use of these techniques, a number of enhanced derivatives were generated from the ‘hinge’ region of the nisin peptide. Furthermore, a derivative in which the three hinge amino acids were replaced with three alanines represents the first enhanced derivative of nisin to have been designed through a rational process. This derivative also formed the backbone for the creation of an active, trypsin resistant, variant. Through the employment of further mutagenesis methods a derivative was created with potential use as an oral anti-bacterial in the future. Finally a number of lead nisin derivatives were investigated to assess their anti- Streptococcus agalactiae ability, a mastitis associated pathogen. Also a system was developed to facilitate the large scale production of these candidates, or other nisin derivatives, from dairy substrates.

Avvägning mellan arbetsmiljö och effektivitet med hjälp av multikriterieanalys : Hur komplettering av kundtjänst påverkar kundnöjdhet och effektivitet

A public organization has a section for customer service which is responsible of order entry from customers concerning errands within real estate and business equipment, cleaning, transport operations and handicap appliance. According to the co-ordinators in hospitals within the organisation the customers are requesting for staff to talk to physically, meaning a person to speak with face to face. The customers experiencing that it’s sometimes difficult to call customer service or use the web form, which is the only communication paths in the current situation. Proposed changes presented claim that a complement to customer service with local service centers in every hospital. The purpose of this study is to evaluate a change proposition by weigh between efficiency and working environment, this by using multi-criteria analysis. To achieve the goal a decision model is designed in the decision tool DecideIT. The aim of the study is to recommend decision makers to choose one of the options based on as rational grounds as possible. The result of the study showed that the preferred alternative is not to supplement customer service with local service centers. For the most part, the result depending on the survey (represented result from working environment criteria) which showed that the majority of customers do not request a person to speak with face to face at all.

O estado como empregador de última instância: uma proposta de pleno emprego, estabilidade e condições dignas de trabalho para o Brasil

GOMES, Z. B. ; LOURENÇO, André Luís Cabral de . Atuação do Estado como empregador de última Instância: uma proposta para eliminar o desemprego estrutural do Brasil. In: Encontro Nacional de Economia Política, 13. 2008, João Pessoa/PB. Anais... João Pessoa: ENEP, 2008.