Ühis- ning erijooni Soome ja Eesti Kaitseliitude puhkpillimuusikas aastatel 1925-1934.

This study focuses on the similarities and differences between the Estonian Defence League and the Finnish Civil Guard brass bands during the period 1925-1934. By 1934 this paramilitary volunteer state defence organisation had reached stability in its development, such that social, cultural and patriotic education of the people - with the help of brass band music among other means- had acquired a significant role, in addition to prioritised military and sports activities. The study begins with introductory paragraphs I and II, which describes the founding of the organisations, their participation in the Wars of Independence and their subsequent peace time activities as well as their representation in the media at the time. The thesis also briefly introduces military music in Finland and Estonia, as well as describes the influence of military music on the Defence League brass bands. The period under review includes the global economic crisis, which undoubtedly concerned the Defence League/Civil Guard and the Lapua and War of Independence movements, which greatly affected the apolitical principles of the organisations. The main emphasis of the thesis is the Defence League/Civil Guard brass band`s musical activities in two counties - Etelä-Pohjanmaa and Pärnumaa, while also including a general overview of the Estonian Defence League brass bands´ activities. One of the most important benefits of the thesis is its introduction of the brass band repertoire in use at the time, which was played by both professional and as well as amateur orchestras the latter of which also included the brass bands of the Defence League/Civil Guard and the Fire Services. Brass band music held a secondary, yet significant position in the Defence League/Civil Guard, where the orchestra as a musical grouping was obliged to perform not only at inner-organisational and national celebrations but also at any event requiring brass band music, such as song festivals, singing days, and other local cultural events. The professional preparation of the band conductors at the beginning of the period under review was not well specialised, but the training of the Defence League/Civil Defence brass band conductors was carried out regularly in both republic according to the opportunities and dedicated training programmes available. The musicians of the Defence League/Civil Defence brass bands were at the same time members of the military organisations as well as amateur musicians, which placed upon them extra demands - they were under close public supervision in all situations. Based on the principle of chronology it appeared that both Finnish and Estonian respective organisations´ brass bands used the gradually improving economic situation for purchasing musical instruments, obtaining repertoire and training musicians/conductors. Despite the fact that brass band music in the Defence League/Civil Guard was considered an amateur activity and a hobby, the more far-reaching objective of the organisation was to resemble the Defence Forces´ orchestras as closely as possible in all aspects. The Defence League/Civil Guard brass band music definitely had a significant influence on forming, developing and enriching music life in both republics. The reviewed nine-year period introduced the musical activities of the Defence League/Civil Guard against the background of the everyday life of the organisation and the need for brass band music and its continuity in the voluntary state defence institutions of both republics.

Testing the efficacy of a chilli-tobacco rope fence as a deterrent against crop-raiding elephants

Chilli-based repellents have shown promise as deterrents against crop-raiding elephants in Africa. We experimented with ropes coated with chilli-based repellent as a cheap alternative to existing elephant cropraid deterrent methods in India. Three locations (Buxa Tiger Reserve, Wyanad Wildlife Sanctuary and Hosur Forest Division) representing varying rainfall regimes from high to low, and with histories of intense elephant-agriculture conflict, were selected for the experiments that were conducted over 2-3 months during the pre-harvest period of the kharif season in late 2006. Chilli and tobacco powder mixed with waste oil was applied to ropes strung around agricultural fields of 1.4-5.5 km perimeter and elephant approaches were monitored. Elephants breached the rope fences a few times at all three study sites. Female-led herds were far more deterred (practically 100% reduction) than were solitary males (c. 50%) by the chilli-tobacco rope. Efficacy of this method as a deterrent was significantly better in the low-rainfall regime relative to medium and high-rainfall regimes. The initial promising results present a case for more rigorous experimentation; these would help determine if the elephants avoiding the rope are responding physiologically to the chilli-tobacco smell or merely reacting cautiously to a novel substance in their environment.

Requirements for information management system in agricultural contracting

Menneinä vuosikymmeninä maatalouden työt ovat ensin koneellistuneet voimakkaasti ja sittemmin mukaan on tullut automaatio. Nykyään koneiden kokoa suurentamalla ei enää saada tuottavuutta nostettua merkittävästi, vaan työn tehostaminen täytyy tehdä olemassa olevien resurssien käyttöä tehostamalla. Tässä työssä tarkastelun kohteena on ajosilppuriketju nurmisäilörehun korjuussa. Säilörehun korjuun intensiivisyys ja koneyksiköiden runsas määrä ovat työnjohdon kannalta vaativa yhdistelmä. Työn tavoitteena oli selvittää vaatimuksia maatalouden urakoinnin tueksi kehitettävälle tiedonhallintajärjestelmälle. Tutkimusta varten haastateltiin yhteensä 12 urakoitsijaa tai yhteistyötä tekevää viljelijää. Tutkimuksen perusteella urakoitsijoilla on tarvetta tietojärjestelmille.Luonnollisesti urakoinnin laajuus ja järjestelyt vaikuttavat asiaan. Tutkimuksen perusteella keskeisimpiä vaatimuksia tiedonhallinnalle ovat: • mahdollisimman laaja, yksityiskohtainen ja automaattinen tiedon keruu tehtävästä työstä • karttapohjaisuus, kuljettajien opastus kohteisiin • asiakasrekisteri, työn tilaus sähköisesti • tarjouspyyntöpohjat, hintalaskurit • luotettavuus, tiedon säilyvyys • sovellettavuus monenlaisiin töihin • yhteensopivuus muiden järjestelmien kanssa Kehitettävän järjestelmän tulisi siis tutkimuksen perusteella sisältää seuraavia osia: helppokäyttöinen suunnittelu/asiakasrekisterityökalu, toimintoja koneiden seurantaan, opastukseen ja johtamiseen, työnaikainen tiedonkeruu sekä kerätyn tiedon käsittelytoimintoja. Kaikki käyttäjät eivät kuitenkaan tarvitse kaikkia toimintoja, joten urakoitsijan on voitava valita tarvitsemansa osat ja mahdollisesti lisätä toimintoja myöhemmin. Tiukoissa taloudellisissa ja ajallisissa raameissa toimivat urakoitsijat ovat vaativia asiakkaita, joiden käyttämän tekniikan tulee olla toimivaa ja luotettavaa. Toisaalta inhimillisiä virheitä sattuu kokeneillekin, joten hyvällä tietojärjestelmällä työstä tulee helpompaa ja tehokkaampaa.

A macroeconomic analysis of adaptation to climate change impacts on forests in India

We examine the potential for adaptation to climate change in Indian forests, and derive the macroeconomic implications of forest impacts and adaptation in India. The study is conducted by integrating results from the dynamic global vegetation model IBIS and the computable general equilibrium model GRACE-IN, which estimates macroeconomic implications for six zones of India. By comparing a reference scenario without climate change with a climate impact scenario based on the IPCC A2-scenario, we find major variations in the pattern of change across zones. Biomass stock increases in all zones but the Central zone. The increase in biomass growth is smaller, and declines in one more zone, South zone, despite higher stock. In the four zones with increases in biomass growth, harvest increases by only approximately 1/3 of the change in biomass growth. This is due to two market effects of increased biomass growth. One is that an increase in biomass growth encourages more harvest given other things being equal. The other is that more harvest leads to higher supply of timber, which lowers market prices. As a result, also the rent on forested land decreases. The lower prices and rent discourage more harvest even though they may induce higher demand, which increases the pressure on harvest. In a less perfect world than the model describes these two effects may contribute to an increase in the risk of deforestation because of higher biomass growth. Furthermore, higher harvest demands more labor and capital input in the forestry sector. Given total supply of labor and capital, this increases the cost of production in all the other sectors, although very little indeed. Forestry dependent communities with declining biomass growth may, however, experience local unemployment as a result.

Molecular assemblies for solar energy conversion - Biomimetic approach

Excitation energy migration followed by electron transfer forms the main components of natural photosynthesis. An understanding of these aspects is essential to reenact the primary processes in laboratory under conditions that are precisely repeatable. Here we describe the state of understanding of the natural process and several model systems designed to harvest solar energy and conversion to useful form of chemical energy. The molecular assemblies constituting the model systems offer a great advantage in terms of better comprehension of the mechanistic aspects and yield valuable information on the design of molecular photonic devices.

Clan-based evolutionary approach for solving control problems

This paper presents a dan-based evolutionary approach for solving control problems. Three selected control problems, viz. linear-quadratic, harvest, and push-cart problems, are solved using the proposed approach. Results are compared with those of the evolutionary programming (EP) approach. In most of the cases, the proposed approach is successful in obtaining (near) optimal solutions for these selected problems.

Power and Discrete Rate Adaptation for Energy Harvesting Wireless Nodes

Energy Harvesting (EH) nodes, which harvest energy from the environment in order to communicate over a wireless link, promise perpetual operation of a wireless network with battery-powered nodes. In this paper, we address the throughput optimization problem for a rate-adaptive EH node that chooses its rate from a set of discrete rates and adjusts its power depending on its channel gain and battery state. First, we show that the optimal throughput of an EH node is upper bounded by the throughput achievable by a node that is subject only to an average power constraint. We then propose a simple transmission scheme for an EH node that achieves an average throughput close to the upper bound. The scheme's parameters can be made to account for energy overheads such as battery non-idealities and the energy required for sensing and processing. The effect of these overheads on the average throughput is also analytically characterized.

A tuned rectifier for RF energy harvesting from ambient radiations

A circuit topology based on accumulate-and-use philosophy has been developed to harvest RF energy from ambient radiations such as those from cellular towers. Main functional units of this system are antenna, tuned rectifier, supercapacitor, a gated boost converter and the necessary power management circuits. Various RF aspects of the design philosophy for maximizing the conversion efficiency at an input power level of 15 mu W are presented here. The system is characterized in an anechoic chamber and it has been established that this topology can harvest RF power densities as low as 180 mu W/m(2) and can adaptively operate the load depending on the incident radiation levels. The output of this system can be easily configured at a desired voltage in the range 2.2-4.5 V. A practical CMOS load - a low power wireless radio module has been demonstrated to operate intermittently by this approach. This topology can be easily modified for driving other practical loads, from harvested RF energy at different frequencies and power levels.

Hybrid Energy Harvesting Wireless Systems: Performance Evaluation and Benchmarking

Energy harvesting sensor (EHS) nodes provide an attractive and green solution to the problem of limited lifetime of wireless sensor networks (WSNs). Unlike a conventional node that uses a non-rechargeable battery and dies once it runs out of energy, an EHS node can harvest energy from the environment and replenish its rechargeable battery. We consider hybrid WSNs that comprise of both EHS and conventional nodes; these arise when legacy WSNs are upgraded or due to EHS deployment cost issues. We compare conventional and hybrid WSNs on the basis of a new and insightful performance metric called k-outage duration, which captures the inability of the nodes to transmit data either due to lack of sufficient battery energy or wireless fading. The metric overcomes the problem of defining lifetime in networks with EHS nodes, which never die but are occasionally unable to transmit due to lack of sufficient battery energy. It also accounts for the effect of wireless channel fading on the ability of the WSN to transmit data. We develop two novel, tight, and computationally simple bounds for evaluating the k-outage duration. Our results show that increasing the number of EHS nodes has a markedly different effect on the k-outage duration than increasing the number of conventional nodes.

Ag2S sensitized mesoporous Bi2WO6 architectures with enhanced visible light photocatalytic activity and recycling properties

To harvest solar energy more efficiently, novel Ag2S/Bi2WO6 heterojunctions were synthesized by a hydrothermal route. This novel photocatalyst was synthesized by impregnating Ag2S into a Bi2WO6 semiconductor by a hydrothermal route without any surfactants or templates. The as prepared structures were characterized by multiple techniques such as X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmet-Teller (BET) analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDS), UV-vis diffuse reflection spectroscopy (DRS) and photoluminescence (PL). The characterization results suggest mesoporous hierarchical spherical structures with a high surface area and improved photo response in the visible spectrum. Compared to bare Bi2WO6, Ag2S/Bi2WO6 exhibited much higher photocatalytic activity towards the degradation of dye Rhodamine B (RhB). Although silver based catalysts are easily eroded by photogenerated holes, the Ag2S/Bi2WO6 photocatalyst was found to be highly stable in the cyclic experiments. Based on the results of BET, Pl and DRS analysis, two possible reasons have been proposed for the enhanced visible light activity and stability of this novel photocatalyst: (1) broadening of the photoabsorption range and (2) efficient separation of photoinduced charge carriers which does not allow the photoexcited electrons to accumulate on the conduction band of Ag2S and hence prevents the photocorrosion.

Energy Harvesting WSNs for Accurately Estimating the Maximum Sensor Reading: Trade-Offs and Optimal Design

Computing the maximum of sensor readings arises in several environmental, health, and industrial monitoring applications of wireless sensor networks (WSNs). We characterize the several novel design trade-offs that arise when green energy harvesting (EH) WSNs, which promise perpetual lifetimes, are deployed for this purpose. The nodes harvest renewable energy from the environment for communicating their readings to a fusion node, which then periodically estimates the maximum. For a randomized transmission schedule in which a pre-specified number of randomly selected nodes transmit in a sensor data collection round, we analyze the mean absolute error (MAE), which is defined as the mean of the absolute difference between the maximum and that estimated by the fusion node in each round. We optimize the transmit power and the number of scheduled nodes to minimize the MAE, both when the nodes have channel state information (CSI) and when they do not. Our results highlight how the optimal system operation depends on the EH rate, availability and cost of acquiring CSI, quantization, and size of the scheduled subset. Our analysis applies to a general class of sensor reading and EH random processes.

Evaluación del crecimiento y producción de turiones de espárrago verde (Asparagus officinalis L.) producidos bajo dos sistemas de inicio, arañas y plantines, en Azul, Buenos Aires

En dos plantaciones de espárrago verde (Asparagus officinalis L.) en el centro de la Pcia. de Buenos Aires, del cultivar UC 157 F2, iniciadas con arañas y plantines, durante su primer año de cosecha, se determinó la tasa de elongación diaria y total hasta el momento de la ramificación de los turiones, el número de días hasta alcanzar el largo exportable (22.5 cm) y los días hasta el momento de la ramificación con el objetivo de estudiar su comportamiento en la zona centro de la provincia de Buenos Aires. Las mediciones se efectuaron durante seis semanas, desde el 26 de septiembre hasta el 4 de noviembre de 2005, desde la emergencia del turión hasta el día de su ramificación (rama de 5 mm sobre su bráctea). La elongación máxima hasta el día de ramificación en promedio y para ambos sistemas de inicio, varió 2 desde 35.3 cm al principio de la cosecha hasta 22.8 cm al final de la misma. Las tasas de elongación relativas variaron en promedio para ambos sistemas de inicio, entre 0.11 cm cm-1 d-1 y 0.38 cm cm-1 d-1 dependiendo de la temperatura del aire. Al mismo tiempo las parcelas constituyentes del ensayo fueron sometidas a una cosecha comercial durante las seis semanas de evaluación. Los espárragos cosechados constituyeron el rendimiento total (kg ha-1) para cada sistema de inicio entre los cuales no se encontraron diferencias estadísticamente significativas. Este estudio permitiría explicar las diferencias de rendimiento comercial para un mismo cultivar en diferentes zonas de producción. Se concluye que para una zona dada, la elongación y sobre todo la ramificación, son variables prioritarias para la determinación del potencial productivo de un cultivar, debiendo tener en cuenta las condiciones de temperatura en las cual se pretende producir este cultivo y el mercado de destino de la producción debido a las mercadas preferencias entre sus consumidores.

Evaluación de técnicas de defensa y de la densidad en el cultivo de una nueva hortaliza : Cucúrbita pepo var. vegetable spaghetti

El zapallo Spaghetti, cultivo vigoroso de clima templado, constituye una alternativa productiva interesante y novedosa para nuestro país. El objetivo de este estudio fue evaluar el efecto del mulching y de la densidad sobre el rendimiento total, el peso medio y el calibre de los frutos. El estudio se llevó a cabo en Azul sobre un suelo Argiudol típico en camellones de 0,80 m de ancho con diferentes densidades de siembra. Se realizó una fertilización profunda en bandas de 0,80 m con fosfato diamónico, controlando las malezas en forma química, manual y mecánicamente, y las plagas haciendo aplicaciones preventivas de insecticidas y fungicidas. La siembra manual se efectuó el 2 de noviembre y los tratamientos fueron: densidades de siembra de 20, 15, 10 y 5 mil pl/ha (D1, D2, D3 y D4), con y sin mulching. Se trabajó con 32 parcelas y cada una tenía tres surcos de seis metros de longitud separados entre si por 2m. Se realizaron cuatro cosechas al llegar a la madurez completa (15/2, 29/2, 7/3 y 3/4). Los calibres evaluados fueron: (1) 2,2 kg, (2) 1,7 kg; (3) 1,3 kg y (4) 0,8 kg / fruto. Para el análisis de los datos se utilizó un modelo de bloques completamente aleatorizados con parcelas sub-divididas. En la parcela principal se evaluó el efecto del mulching, en la subparcela la densidad y la interacción de mulching por densidad, y en la subsubparcelas las diferentes cosechas. La cosecha total mostró diferencias significativas para el efecto del mulching, obteniéndose 71,90 t/ha (a) (con mulching) y 62,02 t/ha (b) (sin mulching); para cada densidad se detectaron diferencias significativas para el efecto mulching: D1: 84,45 t/ha (a), D2: 76,47 t/ha (ab); D3: 65,14 t/ha (b) y D4: 61,55 t/ha (b). Se observaron diferencias significativas en el número de frutos cosechados: con mulching (51.667 frutos/ha) y sin mulching (44.167 frutos/ha), y para las diferentes densidades: D1: 54.167 (a); D2: 50.000 (ab); D3: 47.700 (ab) y D4: 40.833 (b) t/ha. La composición de calibres de frutos cosechados fue el mismo para todos los tratamientos y cosechas.

Report of the Study Group on “Ecosystem-Based Management Science and its application to the North Pacific”

EXECUTIVE SUMMARY INTRODUCTION OVERVIEW OF INTERNATIONAL EBM HISTORY References CANADA Overview Activities to date Integrated Management implementation in Canada Objectives, indicators and reference points Assessment approaches Research directions for the future Management directions for the future References JAPAN Overview Conservation and sustainable use of marine living resources Harvest control by TAC system Stock Recovery Plan and effort regulation system Stock enhancement by hatchery-produced juvenile release Conservation and sustainable develop-ment on coastal waters The implementation of ecosystem-based management PEOPLE’S REPUBLIC OF CHINA Overview Current actions Output control Input control Summer fishing ban Enhance ecosystem health REPUBLIC OF KOREA Initiatives and actions of ecosystem-based management in Korea Current ecosystem-based management initiatives in Korea Precautionary TAC-based fishery management Closed fishing season/areas Fish size- and sex-controls Fishing gear design restrictions Marine protected areas (MPA) RUSSIA Existing and anticipated ecosystem-based management initiatives Issues related to the implementation of ecosystem-based management UNITED STATES OF AMERICA Definitions and approaches to ecosystem-based fishery management in the United States Present U.S. legislative mandates relating to ecosystem-based fishery management Target species Bycatch species Threatened or endangered species Habitats Food webs Ecosystems Integration of legislative mandates into an ecosystem approach Scientific issues in implementing ecosystem-based approaches References DISCUSSION AND RECOMMENDATIONS APPENDICES Appendix 10.1 Study group membership and participants Appendix 10.2 Terminology definitions Appendix 10.3 Present state of implementing ecosystem-based fishery management in Alaska: Alaska groundfish fisheries Appendix 10.4 Present state of implementing ecosystem-based fishery management off the West Coast of the United States: Pacific Coast groundfish fisheries Appendix 10.5 Descriptions of multi-species and ecosystem models developed or under development in the U.S. North Pacific region that might be used to predict effects of fishing on ecosystems Appendix 10.6 A potential standard reporting format (developed by Australia, and currently being used by the U.S.A in their contribution to this report) (83 page document)

La civilización vasca medieval: vida(s), cotidiana(s), mentalidad(es) y cultura(s)

[ES]A lo largo de las páginas de este trabajo se pasa revista a diversas cuestiones que permiten realizar una aproximación a las diversas formas de vida cotidiana y mentalidad del País Vasco y Navarra durante los siglos bajomedievales. Esas cuestiones aluden al primum vivere, al ciclo vital, al control de la vida privada de los individuos y pública de las comunidades por parte de las autoridades, las fiestas, las supersticiones y distintos aspectos relativos a la cultura, como literatura, historiografía y arte.