Active teaching-learning methodologies: medical students' views of problem-based learning

The prevailing undergraduate medical training process still favors disconnection and professional distancing from social needs. The Brazilian Ministries of Education and Health, through the National Curriculum Guidelines, the Incentives Program for Changes in the Medical Curriculum (PROMED), and the National Program for Reorientation of Professional Training in Health (PRO-SAÚDE), promoted the stimulus for an effective connection between medical institutions and the Unified National Health System (SUS). In accordance to the new paradigm for medical training, the Centro Universitário Serra dos Órgãos (UNIFESO) established a teaching plan in 2005 using active methodologies, specifically problem-based learning (PBL). Research was conducted through semi-structured interviews with third-year undergraduate students at the UNIFESO Medical School. The results were categorized as proposed by Bardin's thematic analysis, with the purpose of verifying the students' impressions of the new curriculum. Active methodologies proved to be well-accepted by students, who defined them as exciting and inclusive of theory and practice in medical education.

DYNAMICS OF LEAF FALL FROM RIPARIAN VEGETATION AND THE ACCUMULATION IN BENTHIC STOCK IN NEOTROPICAL STREAMS1

ABSTRACT Considering the importance of the riparian vegetation leaves as an energetic source to first order streams, the aim of the present study was to evaluate the leaf biomass contribution to the system and its temporal dynamics. With this purpose, monthly samples from July 2008 to June 2009 were collected using four sampling devices installed in three streams, in order to collect the vertical, lateral and terrestrial loads, and the benthic stock. We tested the following hypothesis: (1) leaf biomass input is higher after hydric stress periods; and (2) benthic stock biomass increase with higher loads from vertical and lateral entrances. Leaves represented 71.9% (on average) of all sampled allochthonous matter, with seasonal significant variation along the studied year. Peaks of leaf input were registered in September-October, after an increase in rainfall, and also in January, after a decrease in rainfall. Leaf input was higher in the lateral load.

Operational characteristics of four metering systems for agricultural fertilizers and amendments

The use of fertilizers and solid amendments in agriculture generates special interest for their effect on crop productivity, as well as for their environmental impact. The efficient use of these products demands knowing their physical and mechanical properties, the storing conditions effect and the operational characteristics of the metering systems used in the fertilizing equipment. In this context, the present study was developed with the purpose of evaluating the operational characteristics of different fertilizing metering systems and to determine the adequate metering system-product operational parameters, using powder lime, powder gypsum, granular 10-30-10 (N-P-K), and granular urea. Operational differences were established among four types of commercial fertilizer metering systems, including wire auger, star-shaped feed wheel, feed screw and ridged traction wheel. The study found that the unloading rate depends directly on the fertilizer metering system's rotating speed and is affected by particle size, repose angle, bulk density and moisture content of the applied product. The wire auger and star-shaped feed wheel metering systems were adequate for the distribution of powder products and the feed screw for granulated fertilizers. Furthermore, theoretical and experimental characteristic equations were established, defining curves for calibration and handling of the products plus the rotating speed range in which a better distributing behavior was achieved.

Cadastral maps of irrigated areas by center pivots in the State of Minas Gerais, using CBERS-2B/CCD satellite imaging

Medium-resolution satellite images have been widely used for the identification and quantification of irrigated areas by center pivot. These areas, which present predominantly circular forms, can be easily identified by visual analyses of these images. In addition to identifying and quantifying areas irrigated by center pivot, other information that is associated to these areas is fundamental for producing cadastral maps. The goal of this work was to generate cadastral mapping of areas irrigated by center pivots in the State of Minas Gerais, Brazil, with the purpose of supplying information on irrigated agriculture. Using the satellite CBERS2B/CCD, images were used to identify and quantify irrigated areas and then associate these areas with a database containing information about: irrigated area, perimeter, municipality, path row, basin in which the pivot is located, and the date of image acquisition.3,781 center pivots systems were identified. The smallest area irrigated was 4.6 hectares and the largest one was 192.6 hectares. The total estimated value of irrigated area was 254,875 hectares. The largest number of center pivots appeared in the municipalities of Unaí and Paracatu, with 495 and 459 systems, respectively. Cadastral mapping is a very useful tool to assist and enhance information on irrigated agriculture in the State of Minas Gerais.

Technical and economic analysis of replacing artificial lighting system to induction of photoperiod effect in begonia's seedlings in greenhouse

The type of artificial light used for inducing photoperiod effect in begonia's seedlings at greenhouse has fundamental importance in the growth and development of these plants and directly reflects in the electrical energy consumption used in this production process. The objective of this research was to analyze the technical and economic feasibility of replacing the current technology of artificial lighting used by the producers (incandescent lamps), by the technology of discharge lamps with the purpose of inducing photoperiod in a greenhouse. The analysis results indicate that the discharge lamp of 32 W Tubular Fluorescent discharge lamp was the one that presented the lower peak demand and lower average energy consumption of 85.01% compared to incandescent filament lamp of 100 W that is the technology of bigger consumption and currently used by the producer.

Evaluation of an indicator for water yield in a watershed of Alto Rio Grande Region, State of Minas Gerais , Brazil

The Brazilian Law stipulates that water is a limited natural resource doted of economic value, thus it is necessary to develop mechanisms for its adequate management. Actions that encourage the farmers to apply soil conservation practices with the purpose of increase water yield from springs and to promote improvement of its quality, reducing production of sediment transportation, is being encouraged by governments, even with financial compensation for owners. From these assertions, this study aims to quantify the benefits of the conservation actions of the management units and to characterize a Water Yield Indicator (WYI) to support sustainable actions in the watershed of Alto Rio Grande region, in the state of Minas Gerais (MG). To assess the impact of actions it were identified four scenarios of land use and occupation of the watershed from Marcela stream which is located in Alto Rio Grande Region. After analyzing the results, it can be stated that the scenarios simulation has demonstrated important changes in water yield and that the definition of the Water Yield Index from the junction of the erosion potential with the water storage potential, has proved effective, as it integrate quantity and quality of water.

AGRICULTURAL MACHINERY AND IMPLEMENTS DESIGN PROCESS: GUIDELINES FOR SMALL AND MID-SIZED BUSINESSES

ABSTRACT This study aims at presenting the process of machine design and agricultural implements by means of a reference model, formulated with the purpose of explaining the development activities of new products, serving as a guideline to coach human resources and to assist in formalizing the process in small and medium-sized businesses (SMB), i.e. up to 500 employees. The methodology used included the process modeling, carried out from case studies in the SMB, and the study of reference models in literature. The modeling formalism used was based on the IDEF0 standard, which identifies the dimensions required for the model detailing: input information; activities; tasks; knowledge domains; mechanisms; controls and information produced. These dimensions were organized in spreadsheets and graphs. As a result, a reference model with 27 activities and 71 tasks was obtained, distributed over four phases of the design process. The evaluation of the model was carried out by the companies participating in the case studies and by experts, who concluded that the model explains the actions needed to develop new products in SMB.

Power cycling lifetime estimation of IGBT power modules based on chip temperature modeling

In this doctoral thesis, methods to estimate the expected power cycling life of power semiconductor modules based on chip temperature modeling are developed. Frequency converters operate under dynamic loads in most electric drives. The varying loads cause thermal expansion and contraction, which stresses the internal boundaries between the material layers in the power module. Eventually, the stress wears out the semiconductor modules. The wear-out cannot be detected by traditional temperature or current measurements inside the frequency converter. Therefore, it is important to develop a method to predict the end of the converter lifetime. The thesis concentrates on power-cycling-related failures of insulated gate bipolar transistors. Two types of power modules are discussed: a direct bonded copper (DBC) sandwich structure with and without a baseplate. Most common failure mechanisms are reviewed, and methods to improve the power cycling lifetime of the power modules are presented. Power cycling curves are determined for a module with a lead-free solder by accelerated power cycling tests. A lifetime model is selected and the parameters are updated based on the power cycling test results. According to the measurements, the factor of improvement in the power cycling lifetime of modern IGBT power modules is greater than 10 during the last decade. Also, it is noticed that a 10 C increase in the chip temperature cycle amplitude decreases the lifetime by 40%. A thermal model for the chip temperature estimation is developed. The model is based on power loss estimation of the chip from the output current of the frequency converter. The model is verified with a purpose-built test equipment, which allows simultaneous measurement and simulation of the chip temperature with an arbitrary load waveform. The measurement system is shown to be convenient for studying the thermal behavior of the chip. It is found that the thermal model has a 5 C accuracy in the temperature estimation. The temperature cycles that the power semiconductor chip has experienced are counted by the rainflow algorithm. The counted cycles are compared with the experimentally verified power cycling curves to estimate the life consumption based on the mission profile of the drive. The methods are validated by the lifetime estimation of a power module in a direct-driven wind turbine. The estimated lifetime of the IGBT power module in a direct-driven wind turbine is 15 000 years, if the turbine is located in south-eastern Finland.

Antimicrobial resistance and R-plasmid in Salmonella spp from swine and abattoir environments

Salmonella serovars isolated from swine are of particular interest not only because of the pathogenic potential for this animal species, but also due to its relevance with regard to public health. On basis of the profile of resistance to antimicrobials, 13 Salmonella strains were selected which belonged to the serovars Muenster (7), Derby (4), Typhimurium (1), and Braenderup (1). They were isolated from healthy swine as well as from the abattoir environment in the state of Rio de Janeiro. All strains of Salmonella were subjected to bacterial conjugation, and the E. coli K12 Nal r Lac+ F standard strain was used as receptor, with the purpose to verify the ability to transfer the resistance marks. Gene transfer phenomenon was detected in seven strains, and except SalmonellaTyphimurium which transconjugated to Sm, Tc and Su, the remaining ones were characterized by transferring mark Su only. By plasmidial analysis of strains used and their respective transconjugants, 63 Kb plasmid was found, which was probably related to S. Typhimurium resistance.

Health management practices and disease prevalence in dairy sheep systems in Argentina

A cross-sectional survey of 19 dairy sheep farms in Argentina was carried out with the purpose to know farm management, health practices, and occurrence and mortality of diseases. The survey comprised 40% of all sheep milking farms in Argentina. A questionnaire was conducted by way of personal interviews with sheep owners during farm visits. The proportions of farms reporting routine vaccination for clostridial diseases, contagious ecthyma, pneumonia and mineral and vitamin parenteral administration were 63%, 47.3%, 16.6% and 42.1% respectively. Regular treatment against lice was used in 37.5% of the farms, and 89.5% o the farmers treated against gastrointestinal nematodes (GIN). The mean number of GIN drenches per farm was 2.26±1.78 annually. In 68.4% of the milking flocks the California Mastitis Test was regularly done and 55.6% of the farmer managers had sampled their flocks once a year for Brucella ovis antibodies. During the pre-mating period respectively 68.4% and 50% of farmers clinically examined their rams and ewe for general health and teeth condition. The udders of ewes were frequently inspected at the start of each milking period. The most important parasite problems noticed were GIN (reported by 57.9% of farmers), lice (57.9%) and scabies (10.5%) and the most frequent infectious diseases were ecthyma (73.7%), pneumonia and other respiratory problems (57.9%), clinical mastitis (55.6%), clostridial diseases (36.9%) and foot lameness (35.2%). Photosensitivity (47.4%) and ruminal acidosis (42.1%) were reported as other frequent toxic or metabolic disorders. Owners mentioned that the mean lifespan or milk productive time per ewe was 4.5±1.4 years. Perinatal lamb mortality was 8.5% and the total flock mortality rates, above the first 24 h of life was 6.9%. The high rates of lamb mortality during the pre-weaning (10.3%) and post-weaning (5.9%) periods indicate that this problem, as well as the most prevalent diseases, should be the subject of further studies.

The Role of Universities in the Triple Helix model of innovation management within the biotechnology industry, Case example: Turku Science Park Network

Biotechnology has been recognized as the key strategic technology for industrial growth. The industry is heavily dependent on basic research. Finland continues to rank in the top 10 of Europe's most innovative countries in terms of tax-policy, education system, infrastructure and the number of patents issued. Regardless of the excellent statistical results, the output of this innovativeness is below acceptable. Research on the issues hindering the output creation has already been done and the identifiable weaknesses in the Finland's National Innovation system are the non-existent growth of entrepreneurship and the missing internationalization. Finland is proven to have all the enablers of the innovation policy tools, but is lacking the incentives and rewards to push the enablers, such as knowledge and human capital, forward. Science Parks are the biggest operator in research institutes in the Finnish Science and Technology system. They exist with the purpose of speeding up the commercialization process of biotechnology innovations which usually include technological uncertainty, technical inexperience, business inexperience and high technology cost. Innovation management only internally is a rather historic approach, current trend drives towards open innovation model with strong triple helix linkages. The evident problems in the innovation management within the biotechnology industry are examined through a case study approach including analysis of the semi-structured interviews which included biotechnology and business expertise from Turku School of Economics. The results from the interviews supported the theoretical implications as well as conclusions derived from the pilot survey, which focused on the companies inside Turku Science Park network. One major issue that the Finland's National innovation system is struggling with is the fact that it is technology driven, not business pulled. Another problem is the university evaluation scale which focuses more on number of graduates and short-term factors, when it should put more emphasis on the cooperation success in the long-term, such as the triple helix connections with interaction and knowledge distribution. The results of this thesis indicated that there is indeed requirement for some structural changes in the Finland's National innovation system and innovation policy in order to generate successful biotechnology companies and innovation output. There is lack of joint output and scales of success, lack of people with experience, lack of language skills, lack of business knowledge and lack of growth companies.

Hot tool temperature analysis though infrared images

Textile manufacture occupies a prominent place in the national economy. Because of its importance researches have been made on the development of new materials, equipment and methods used in the production process. The cutting of textiles starts in the basic stage, to be followed by the process of the making of clothes and other articles. In the hot cutting of fabric, one of the variables of great importance in the control of the process is the contact temperature between the tool and the fabric. This work presents a technique for the measurement of the temperature based on the processing of infrared images. With this purpose, it was developed a system which is composed of an infrared camera, a framegrabber PC board and a software which analyses the punctual temperature in the cut area enabling the operator to achieve the necessary control of other variables involved in the process.

Muutos kuntaorganisaatiossa - tapaustutkimus erään kunnan teknisestä toimialasta

Kuntaorganisaatioiden muutokset ovat tulleet Suomessa runsaan parinkymmenen vuoden aikana yhä välttämättömämmiksi sekä globaalien että kansallisten toimintaympäristöjen muuttumisen vuoksi. Niitä tehtäessä on kuitenkin kohdattu suuria vaikeuksia jo muutosprosessien alussa, suunnittelu- ja päätöksentekovaiheessa. Keskityttäessä organisaatiomuutosten tavoitteisiin ja lopputulokseen ovat keinot niihin pääsemiseksi jääneet vaille riittävää huomiota. Tämän väitöskirjatutkimuksen päätavoite on selvittää syitä, jotka edistävät ja haittaavat kuntaorganisaation muutosprosessia. Sekundäärisenä tavoitteena on tarkastella motivaation, toimintakulttuurin, poliittisten ja ideologisten eroavaisuuksien sekä arvojen ja asenteiden vaikutusta muutosprosessiin sen eri vaiheissa sekä erilaisissa olosuhteissa. Tutkimuksessa käytetään kvalitatiivista tutkimusmenetelmää, joka tukeutuu erään kunnan teknisen toimialan muutosprosessiin. Tutkimuksen kohteena olevana ajanjaksona sekä vakaassa että muuttuvassa toimintaympäristössä ovat tuon kunnan teknisen toimialan organisaatiomuotoina olleet virasto, liikelaitos, osakeyhtiö ja toimintojen ulkoistaminen. Empiirisen aineiston sekä niin kansallisten kuin kansainvälisten tutkimusten perusteella pyritään löytämään muutosprosessia vaikeuttavia tekijöitä sekä keinoja vaikuttaa prosessin onnistumiseen. Tapaustutkimuksen aineistona ovat tarkastellun kunnan organisaatiomuutoksia koskevat dokumentit. Niitä on täydennetty haastattelemalla henkilöitä, jotka ovat joko suoraan vaikuttaneet muutokseen tai ainakin olleet siinä kiinteästi mukana. Muutosprosessiin liittyviä haasteita lähestytään prosessitutkimuksen avulla pyrkien selvittämään erilaiset kriittiset tapahtumat ja käännekohdat, syy-yhteydet sekä mahdolliset muutoksia suuntaavat mallit. Vaikka muutoksiin vaikuttavat tekijät ovat tämän tutkimuksen tulosten perusteella pääosin samat kuin mitä on havaittu kansainvälisissä tutkimuksissa, liittyy niihin kuitenkin tutkimuksen tapauskohteessa kansallisia ja osittain paikallisiakin erityispiirteitä. On havaittavissa sekä kansallisten ominaispiirteiden että pohjoismaisen hyvinvointiyhteiskunnan ihanteen vaikutusta ihmisten suhtautumisessa muutosprosessiin sekä käyttäytymiseen sen aikana. Tämän tutkimuksen valossa avoimuus ja oikeudenmukaisuus ovat vahvimmin vaikuttavia tekijöitä kuntaorganisaation muutoksessa. Tämän tutkimuksen teoriatarkastelu pohjautuu tutkimuksiin, jotka ovat kohdistuneet muutosprosesseihin yleensä niin julkishallinnon kuin yksityissektorin organisaatioissa. Vaikka tämän väitöskirjan tutkimuksen fokus on kuntasektorilla, ovat sen tulokset suurelta osin sovellettavissa myös yksityissektorille.

Diversity and structure of the tree community of a fragment of tropical secondary forest of the brazilian Atlantic Forest domain 15 and 40 years after logging

Two adjacent tracts of tropical secondary forest, situated in Itambé do Mato Dentro, south-eastern Brazil, which had been regenerating for 15 and 40 years after clearing, were compared with the purpose of detecting differences in species diversity and composition, species guild composition (regeneration, stratification and dispersion), and stand structure. Four and three 1,125 m² plots laid on the 15- and 40-year-old stands, respectively, sampled 2,430 trees with diameter at the base of the stem > 5 cm. The number of species (S = 199) was high for this forest type and significantly higher for the older stand. Tree density was significantly higher in the younger stand, particularly for smaller trees, whereas the two stands did not differ in both basal area and volume per hectare. Trees of shade-tolerant and understory species were significantly more abundant in the older stand. Though sharing a large proportion of species (49%), the two stands differed significantly in the abundance of many species. Live stumps probably contributed to the relatively quick restoration of some forest characteristics, particularly species diversity, basal area and volume.

Reference values for lung function tests: III. Carbon monoxide diffusing capacity (transfer factor)

Carbon monoxide diffusing capacity (DLCO) or transfer factor (TLCO) is a particularly useful test of the appropriateness of gas exchange across the lung alveolocapillary membrane. With the purpose of establishing predictive equations for DLCO using a non-smoking sample of the adult Brazilian population, we prospectively evaluated 100 subjects (50 males and 50 females aged 20 to 80 years), randomly selected from more than 8,000 individuals. Gender-specific linear prediction equations were developed by multiple regression analysis with single breath (SB) absolute and volume-corrected (VA) DLCO values as dependent variables. In the prediction equations, age (years) and height (cm) had opposite effects on DLCOSB (ml min-1 mmHg-1), independent of gender (-0.13 (age) + 0.32 (height) - 13.07 in males and -0.075 (age) + 0.18 (height) + 0.20 in females). On the other hand, height had a positive effect on DLCOSB but a negative one on DLCOSB/VA (P<0.01). We found that the predictive values from the most cited studies using predominantly Caucasian samples were significantly different from the actually measured values (P<0.05). Furthermore, oxygen uptake at maximal exercise (VO2max) correlated highly to DLCOSB (R = 0.71, P<0.001); this variable, however, did not maintain an independent role to explain the VO2max variability in the multiple regression analysis (P>0.05). Our results therefore provide an original frame of reference for either DLCOSB or DLCOSB/VA in Brazilian males and females aged 20 to 80 years, obtained from the standardized single-breath technique.