Development and interrater reliability testing of a telephone interview training programme for Australian nurse interviewers

Summary Background The final phase of a three phase study analysing the implementation and impact of the nurse practitioner role in Australia (the Australian Nurse Practitioner Project or AUSPRAC) was undertaken in 2009, requiring nurse telephone interviewers to gather information about health outcomes directly from patients and their treating nurse practitioners. A team of several registered nurses was recruited and trained as telephone interviewers. The aim of this paper is to report on development and evaluation of the training process for telephone interviewers. Methods The training process involved planning the content and methods to be used in the training session; delivering the session; testing skills and understanding of interviewers post-training; collecting and analysing data to determine the degree to which the training process was successful in meeting objectives and post-training follow-up. All aspects of the training process were informed by established educational principles. Results Interrater reliability between interviewers was high for well-validated sections of the survey instrument resulting in 100% agreement between interviewers. Other sections with unvalidated questions showed lower agreement (between 75% and 90%). Overall the agreement between interviewers was 92%. Each interviewer was also measured against a specifically developed master script or gold standard and for this each interviewer achieved a percentage of correct answers of 94.7% or better. This equated to a Kappa value of 0.92 or better. Conclusion The telephone interviewer training process was very effective and achieved high interrater reliability. We argue that the high reliability was due to the use of well validated instruments and the carefully planned programme based on established educational principles. There is limited published literature on how to successfully operationalise educational principles and tailor them for specific research studies; this report addresses this knowledge gap.

Physical activity amongst people with chronic back pain : an investigation of perceived barriers and facilitators to inform intervention development

Previous research has indicated people with non-specific low back pain who are physically inactive face a poorer prognosis than people with back pain who participate in low or moderate intensity physical activity. They also face a greater risk of other lifestyle related health conditions, such as diabetes and heart disease. For these reasons, contemporary non-surgical interventions for low back pain aim to incorporate a return to physical activity. However, there is a lack of empirical evidence supporting physical activity interventions for this purpose. It is likely that people with low back pain face additional challenges when trying to commence (or return to) regular physical activity. This exploratory qualitative research aimed to map out perceived barriers and facilitators to undertaking physical activity among people with non-specific low back pain to inform future intervention development.

Managing intensified urban development and industrial uses in Qld : affected area notations

The Queensland government planning policies actively encourage increased dwelling density, sustainable infill development and transit oriented development to maximise land use and minimise urban sprawl. One of the detriments of such a policy is the potential for intensified residential development to create conflict between lawfully operating existing industrial uses and residences. In particular the government is concerned that intensified urban development will increase the risk of litigation from landowners and tenants detrimentally affected by the emission of aerosols, fumes, light, noise, odour, particles or smoke from existing industrial premises.

An exploratory review of whole life cycle costing for Malaysia property development

The demand of implementing Whole Life Cycle Costing (WLCC) towards property development has increased since the launch of Value Management Circular 3/2009 by the Economic Planning Unit Malaysia. The circular made compulsory for all public construction projects and programme including property development estimated more than RM 50 Million to conduct WLCC. However, a knowledge gap on WLCC approach still exists and become a barrier among the practitioner in Malaysia particularly in property development industry. The main focus of this paper is to discuss the WLCC approach and introduce the indicator that need to be considered in Malaysia property development.

Iterative development of MobileMums : a physical activity intervention for women with young children.

Background To describe the iterative development process and final version of ‘MobileMums’: a physical activity intervention for women with young children (<5 years) delivered primarily via mobile telephone (mHealth) short messaging service (SMS). Methods MobileMums development followed the five steps outlined in the mHealth development and evaluation framework: 1) conceptualization (critique of literature and theory); 2) formative research (focus groups, n= 48); 3) pre-testing (qualitative pilot of intervention components, n= 12); 4) pilot testing (pilot RCT, n= 88); and, 5) qualitative evaluation of the refined intervention (n= 6). Results Key findings identified throughout the development process that shaped the MobileMums program were the need for: behaviour change techniques to be grounded in Social Cognitive Theory; tailored SMS content; two-way SMS interaction; rapport between SMS sender and recipient; an automated software platform to generate and send SMS; and, flexibility in location of a face-to-face delivered component. Conclusions The final version of MobileMums is flexible and adaptive to individual participant’s physical activity goals, expectations and environment. MobileMums is being evaluated in a community-based randomised controlled efficacy trial (ACTRN12611000481976).

Teaching new product development to design led innovation

Recently many international tertiary educational programs have capitalised on the value design and business can have upon their interception (Martin, 2009; Brown, 2008; Bruce and Bessant, 2002; Manzini, 2009). This paper discusses the role that two teaching units – New Product Development and Design Led Innovation – play in forming an understanding of commercialisation needed in today’s Industrial Design education. These units are taught consecutively in the later years of the Bachelor of Industrial Design program at the Queensland University of Technology, Brisbane, Australia. In this paper, each teaching unit is discussed in detail and then as a conglomerate, in order to form a basis of knowledge students need in order to fully capitalise on the value design has in business, and to produce a more capable Industrial Design graduate of the future.

Accelerated professional development and peer consultation : two strategies for continuing professional education for nurses

A comparison was made of accelerated professional development (APD) for nurses (n=64), involving peer consultation and reflective practice, and peer consultation alone (n=30). Although APD participants had a higher completion rate, improvements in caregiver behaviors and work environment were not significantly different.

Teaching creatively, teaching for creativity : QUT’s Creative Industries Faculty Showcase Panel

In this panel, we showcase approaches to teaching for creativity in disciplines of the Media, Entertainment and Creative Arts School and the School of Design within the Creative Industries Faculty (CIF) at QUT. The Faculty is enormously diverse, with 4,000 students enrolled across a total of 20 disciplines. Creativity is a unifying concept in CIF, both as a graduate attribute, and as a key pedagogic principle. We take as our point of departure the assertion that it is not sufficient to assume that students of tertiary courses in creative disciplines are ‘naturally’ creative. Rather, teachers in higher education must embrace their roles as facilitators of development and learning for the creative workforce, including working to build creative capacity (Howkins, 2009). In so doing, we move away from Renaissance notions of creativity as an individual genius, a disposition or attribute which cannot be learned, towards a 21st century conceptualisation of creativity as highly collaborative, rhizomatic, and able to be developed through educational experiences (see, for instance, Robinson, 2006; Craft; 2001; McWilliam & Dawson, 2008). It has always been important for practitioners of the arts and design to be creative. Under the national innovation agenda (Bradley et al, 2008) and creative industries policy (e.g., Department for Culture, Media and Sport, 2008; Office for the Arts, 2011), creativity has been identified as a key determinant of economic growth, and thus developing students’ creativity has now become core higher education business across all fields. Even within the arts and design, professionals are challenged to be creative in new ways, for new purposes, in different contexts, and using new digital tools and platforms. Teachers in creative disciplines may have much to offer to the rest of the higher education sector, in terms of designing and modelling innovative and best practice pedagogies for the development of student creative capability. Information and Communication Technologies such as mobile learning, game-based learning, collaborative online learning tools and immersive learning environments offer new avenues for creative learning, although analogue approaches may also have much to offer, and should not be discarded out of hand. Each panelist will present a case study of their own approach to teaching for creativity, and will address the following questions with respect to their case: 1. What conceptual view of creativity does the case reflect? 2. What pedagogical approaches are used, and why were these chosen? What are the roles of innovative learning approaches, including ICTs, if any? 3. How is creativity measured or assessed? How do students demonstrate creativity? We seek to identify commonalities and contrasts between and among the pedagogic case studies, and to answer the question: what can we learn about teaching creatively and teaching for creativity from CIF best practice?

The Yonder project : literacy and social competency development in primary school students through co-creation of live performance

Since 2007 Kite Arts Education Program (KITE), based at Queensland Performing Arts Centre (QPAC), has been engaged in delivering a series of theatre-based experiences for children in low socio-economic primary schools in Queensland. The artist in residence (AIR) project titled Yonder includes performances developed by the children with the support and leadership of teacher artists from KITE for their community and parents/carers,supported by a peak community cultural institution. In 2009,Queensland Performing Arts Centre partnered with Queensland University of Technology (QUT) Creative Industries Faculty (Drama) to conduct a three-year evaluation of the Yonder project to understand the operational dynamics, artistic outputs and the educational benefits of the project. This paper outlines the research findings for children engaged in the Yonder project in the interrelated areas of literacy development and social competencies. Findings are drawn from six iterations of the project in suburban locations on the edge of Brisbane city and in regional Queensland.

Development of a survey instrument to measure TEFL academics' perceptions about, individual and workplace characteristics for conducting research

The Chinese Ministry of Education (MOE) initiatives to improve the English competence of college students, as well as increased proficiency level of entering college students (Cheng, 2002) have contributed to greater demands on Teaching English as a Foreign Language (TEFL) academics (MOE, 2004), as “the upgrading of national English proficiency, then, is predicated largely on the professional competence of the teaching force” (Hu, 2005, p. 655). For TEFL academics, one component of this competence is the capacity to conduct research (Shu, 2002), which also reflects other changes in Chinese higher education. The aspirations of higher education institutions at all levels have led to more rigorous recruitment policies and promotion requirements (Che, 2004; Wang, 2007), stressing research as an important indicator of academics’ performance (Shi, 2002; Pan, 2006). These changes highlight the role of research in higher education institutions’ efforts to raise their national status and world ranking (Zhang, Wang, & He, 2006), and have exerted influences on faculty’s academic role. Academics are obliged to engage in research activities, and this has posed challenges to teaching-oriented institutions and disciplines.

Wherefore art thou, inclusion? Analysing the development of inclusive education in New South Wales, Finland and Alberta

Over the last two decades, moves toward “inclusion” have prompted change in the formation of education policies, schooling structures and pedagogical practice. Yet, exclusion through the categorisation and segregation of students with diverse abilities has grown; particularly for students with challenging behaviour. This paper considers what has happened to inclusive education by focusing on three educational jurisdictions known to be experiencing different rates of growth in the identification of special educational needs: New South Wales (Australia), Alberta (Canada) and Finland (Europe). In our analysis, we consider the effects of competing policy forces that appear to thwart the development of inclusive schools in two of our case-study regions.

Robots move : bootstrapping the development of object representations using sensorimotor coordination

This paper is concerned with the unsupervised learning of object representations by fusing visual and motor information. The problem is posed for a mobile robot that develops its representations as it incrementally gathers data. The scenario is problematic as the robot only has limited information at each time step with which it must generate and update its representations. Object representations are refined as multiple instances of sensory data are presented; however, it is uncertain whether two data instances are synonymous with the same object. This process can easily diverge from stability. The premise of the presented work is that a robot's motor information instigates successful generation of visual representations. An understanding of self-motion enables a prediction to be made before performing an action, resulting in a stronger belief of data association. The system is implemented as a data-driven partially observable semi-Markov decision process. Object representations are formed as the process's hidden states and are coordinated with motor commands through state transitions. Experiments show the prediction process is essential in enabling the unsupervised learning method to converge to a solution - improving precision and recall over using sensory data alone.