Underwater Remote Welding Technology for Offshore Structures

The construction of offshore structures, equipment and devices requires a high level of mechanical reliability in terms of strength, toughness and ductility. One major site for mechanical failure, the weld joint region, needs particularly careful examination, and weld joint quality has become a major focus of research in recent times. Underwater welding carried out offshore faces specific challenges affecting the mechanical reliability of constructions completed underwater. The focus of this thesis is on improvement of weld quality of underwater welding using control theory. This research work identifies ways of optimizing the welding process parameters of flux cored arc welding (FCAW) during underwater welding so as to achieve desired weld bead geometry when welding in a water environment. The weld bead geometry has no known linear relationship with the welding process parameters, which makes it difficult to determine a satisfactory weld quality. However, good weld bead geometry is achievable by controlling the welding process parameters. The doctoral dissertation comprises two sections. The first part introduces the topic of the research, discusses the mechanisms of underwater welding and examines the effect of the water environment on the weld quality of wet welding. The second part comprises four research papers examining different aspects of underwater wet welding and its control and optimization. Issues considered include the effects of welding process parameters on weld bead geometry, optimization of FCAW process parameters, and design of a control system for the purpose of achieving a desired bead geometry that can ensure a high level of mechanical reliability in welded joints of offshore structures. Artificial neural network systems and a fuzzy logic controller, which are incorporated in the control system design, and a hybrid of fuzzy and PID controllers are the major control dynamics used. This study contributes to knowledge of possible solutions for achieving similar high weld quality in underwater wet welding as found with welding in air. The study shows that carefully selected steels with very low carbon equivalent and proper control of the welding process parameters are essential in achieving good weld quality. The study provides a platform for further research in underwater welding. It promotes increased awareness of the need to improve the quality of underwater welding for offshore industries and thus minimize the risk of structural defects resulting from poor weld quality.

Évaluation in silico des pompes d’assistance ventriculaire de type écoulement mixte

L'insuffisance cardiaque est une maladie à grande incidence dont le traitement définitif est difficile. Les pompes d'assistance ventriculaire ont été proposées comme thérapie alternative à long terme, mais la technologie est relativement jeune et selon son design, axial ou centrifuge, le dispositif favorise soit l'hémolyse, soit la stagnation de l'écoulement sanguin. Les pompes à écoulement mixte, combinant certaines propriétés des deux types, ont été proposées comme solution intermédiaire. Pour évaluer leurs performances, nous avons effectué des comparaisons numériques entre huit pompes, deux axiales, deux centrifuges, et quatre mixtes, en employant un modèle Windkessel du système cardiovasculaire avec paramètres optimisés pour l'insuffisance cardiaque résolu avec une méthode Radau IIA3, une méthode de résolution de système d'équations différentielles ordinaires L-stable appartenant à la famille des méthodes Runge-Kutta implicites. Nos résultats semblent suggérer que les pompes d'assistance mixtes ne démontrent qu'un léger avantage comparativement aux autres types en terme de performance optimale dans le cas de l'insuffisance cardiaque, mais il faudrait effectuer plus d'essais numériques avec un modèle plus complet, entre autres avec contrôles nerveux implémentés.

Characterization of human and instrument related measurement errors

Measurement is the act or the result of a quantitative comparison between a given quantity and a quantity of the same kind chosen as a unit. It is generally agreed that all measurements contain errors. In a measuring system where both a measuring instrument and a human being taking the measurement using a preset process, the measurement error could be due to the instrument, the process or the human being involved. The first part of the study is devoted to understanding the human errors in measurement. For that, selected person related and selected work related factors that could affect measurement errors have been identified. Though these are well known, the exact extent of the error and the extent of effect of different factors on human errors in measurement are less reported. Characterization of human errors in measurement is done by conducting an experimental study using different subjects, where the factors were changed one at a time and the measurements made by them recorded. From the pre‐experiment survey research studies, it is observed that the respondents could not give the correct answers to questions related to the correct values [extent] of human related measurement errors. This confirmed the fears expressed regarding lack of knowledge about the extent of human related measurement errors among professionals associated with quality. But in postexperiment phase of survey study, it is observed that the answers regarding the extent of human related measurement errors has improved significantly since the answer choices were provided based on the experimental study. It is hoped that this work will help users of measurement in practice to better understand and manage the phenomena of human related errors in measurement.

Fujaba Days 2011

Fujaba is an Open Source UML CASE tool project started at the software engineering group of Paderborn University in 1997. In 2002 Fujaba has been redesigned and became the Fujaba Tool Suite with a plug-in architecture allowing developers to add functionality easily while retaining full control over their contributions. Multiple Application Domains Fujaba followed the model-driven development philosophy right from its beginning in 1997. At the early days, Fujaba had a special focus on code generation from UML diagrams resulting in a visual programming language with a special emphasis on object structure manipulating rules. Today, at least six rather independent tool versions are under development in Paderborn, Kassel, and Darmstadt for supporting (1) reengineering, (2) embedded real-time systems, (3) education, (4) specification of distributed control systems, (5) integration with the ECLIPSE platform, and (6) MOF-based integration of system (re-) engineering tools. International Community According to our knowledge, quite a number of research groups have also chosen Fujaba as a platform for UML and MDA related research activities. In addition, quite a number of Fujaba users send requests for more functionality and extensions. Therefore, the 8th International Fujaba Days aimed at bringing together Fujaba develop- ers and Fujaba users from all over the world to present their ideas and projects and to discuss them with each other and with the Fujaba core development team.

Strategische Erfolgsfaktoren für ein kosten-risiko-optimales Public Debt Management - Organisatorische und inhaltliche Parameter im internationalen Vergleich

Aus den im Rahmen dieser Forschungsarbeit empirisch gewonnenen Erkenntnissen werden Gestaltungsempfehlungen für das Public Debt Management abgeleitet. Diese zeigen, dass ein wirtschaftliches Public Debt Management nicht ein ausschließlich kostenminimierendes (sparsames), sondern ein kosten-risiko-optimales Public Debt Management mit effektiven internen und externen Überwachungsinstrumenten und wirksamer externer Finanzkontrolle sein muss.

Cooperative Physics of Fly Swarms: An Emergent Behavior

We have simulated the behavior of several artificial flies, interacting visually with each other. Each fly is described by a simple tracking system (Poggio and Reichardt, 1973; Land and Collett, 1974) which summarizes behavioral experiments in which individual flies fixate a target. Our main finding is that the interaction of theses implemodules gives rise to a variety of relatively complex behaviors. In particular, we observe a swarm-like behavior of a group of many artificial flies for certain reasonable ranges of our tracking system parameters.

The Japanese Business System: Key Features and Prospects for Change

This paper argues that the Japanese business system cannot be adequately understood without extending the focus of analysis beyond the individual firm to the vertical keiretsu, or business group. The vertical group or keiretsu structure was first identified and studied in the auto and electronics industries, where it is most strongly marked, but it characterizes virtually all sectors, service industries as well as manufacturing. Large industrial vertical keiretsu are composed of subsidiaries engaged in three distinct types of activities (manufacturing, marketing, and quasirelated business). The coordination and control systems are built on the flows of products, financial resources, information and technology, and people across formal company boundaries, with the parent firm controlling the key flows. The paper examines the prevailing explanations first for the emergence and then for the persistence of the vertical group structure, and looks at the current pressures for change and adaptation in the system.

Integració d’ una unitat inercial i d’ un giroscopi de fibra òptica en un robot submarí i desenvolupament d’ un sistema de posicionament dins una piscina

El Grup de Visió per Computador i Robòtica (VICOROB) del departament d'Electrònica, Informàtica i Automàtica de la Universitat de Girona investiga en el camp de la robòtica submarina. Al CIRS (Centre d’Investigació en Robòtica Submarina), laboratori que forma part del grup VICOROB, el robot submarí Ictineu és la principal eina utilitzada per a desenvolupar els projectes de recerca. Recentment, el CIRS ha adquirit un nou sistema de sensors d' orientació basat en una unitat inercial i un giroscopi de fibra òptica. Aquest projecte pretén realitzar un estudi d' aquests dispositius i integrar-los al robot Ictineu. D' altra banda, aprofitant les característiques d’aquests sensors giroscopics i les mesures d' un sonar ja integrat al robot, es vol desenvolupar un sistema de localització capaç de determinar la posició del robot en el pla horitzontal de la piscina en temps real

Eina de mobilitat pel sistema de la producció d’Ormetal

L’objectiu principal d’aquest projecte consisteix en realitzar l’estudi, l' anàlisi, el disseny, i el desenvolupament d’una aplicació que millori i faciliti la tasca d’un empleat que treballi fora de l’empresa. Es fa una anàlisi dels requeriments de l’aplicació, es fa el model d’anàlisi i tot seguit el model de disseny, i s’implementarà mitjançant les eines que utilitza la nostra empresa o les que millor s’adaptin a ella. S’analitza també el tipus i el volum d’informació que haurà de manejar. Durant el procés de cada una de les etapes de desenvolupament s’aniran realitzant les corresponents proves per, finalment, realitzar una posada en marxa sobre un empleat a mode de proves en un entorn real. Degut a la necessitat de mobilitat dels comercials s’utilitzen dispositius PDA (Personal Digital Assistant) per al desenvolupament de l’aplicació que els permetrà realitzar les seves tasques. En canvi, l’aplicació corporativa de gestió de l’empresa està situada en un servidor Windows, i per centralitzar i gestionar la informació de les PDA s’utilitzarà una aplicació sota el sistema Windows. L’aplicació s’haurà de confeccionar en funció de les dades que es vulgui que el comercial pugui consultar sobre un client, obra, ... Per millorar-ne la seva funcionalitat, es permetrà l’opció de multi-llenguatge. L’aplicació de la PDA tindrà a grans trets les següents funcionalitats: gestió de clients, gestió de contactes, consultar gestions comercials, consultar obres dels clients, consultar el planning i l’estat dels muntadors. Altres processos que haurà de permetre l’aplicació son: la configuració i instal·lació de l’aplicació en els dispositius PDA i la càrrega i el traspàs de les dades entre l’aplicació del PDA i l’aplicació corporativa de l’empresa

Learning and adaptation in physical heterogeneous teams of robots

In this paper we present a novel approach to assigning roles to robots in a team of physical heterogeneous robots. Its members compete for these roles and get rewards for them. The rewards are used to determine each agent’s preferences and which agents are better adapted to the environment. These aspects are included in the decision making process. Agent interactions are modelled using the concept of an ecosystem in which each robot is a species, resulting in emergent behaviour of the whole set of agents. One of the most important features of this approach is its high adaptability. Unlike some other learning techniques, this approach does not need to start a whole exploitation process when the environment changes. All this is exemplified by means of experiments run on a simulator. In addition, the algorithm developed was applied as applied to several teams of robots in order to analyse the impact of heterogeneity in these systems

Programació del robot e-puck amb Microsoft Robotics Studio

Microsoft Robotics Studio (MRS) és un entorn per a crear aplicacions per a robots utilitzant una gran varietat de plataformes hardware. Conté un entorn de simulació en el que es pot modelar i simular el moviment del robot. Permet també programar el robot, i executar-lo en l’entorn simulat o bé en el real. MRS resol la comunicació entre els diferents processos asíncrons que solen estar presents en el software de control d’un robot: processos per atendre sensors, actuadors, sistemes de control, comunicacions amb l’exterior,... MRS es pot utilitzar per modelar nous robots utilitzant components que ja estiguin disponibles en les seves llibreries, o també permet crear component nous. Per tal de conèixer en detall aquesta eina, seria interessant utilitzar-la per programa els robots e-pucks, uns robots mòbils autònoms de petites dimensions que disposen de dos motors i un complet conjunt de sensors. El que es vol és simular-los, realitzar un programa de control, realitzar la interfície amb el robot i comprovar el funcionament amb el robot real

An hybrid methodology for RL-based behavior coordination in a target following mission with an AUV

Proposes a behavior-based scheme for high-level control of autonomous underwater vehicles (AUVs). Two main characteristics can be highlighted in the control scheme. Behavior coordination is done through a hybrid methodology, which takes in advantages of the robustness and modularity in competitive approaches, as well as optimized trajectories

Vision-based localization of an underwater robot in a structured environment

This paper presents a vision-based localization approach for an underwater robot in a structured environment. The system is based on a coded pattern placed on the bottom of a water tank and an onboard down looking camera. Main features are, absolute and map-based localization, landmark detection and tracking, and real-time computation (12.5 Hz). The proposed system provides three-dimensional position and orientation of the vehicle along with its velocity. Accuracy of the drift-free estimates is very high, allowing them to be used as feedback measures of a velocity-based low-level controller. The paper details the localization algorithm, by showing some graphical results, and the accuracy of the system

Dam wall detection and tracking using a Mechanically Scanned Imaging Sonar

In dam inspection tasks, an underwater robot has to grab images while surveying the wall meanwhile maintaining a certain distance and relative orientation. This paper proposes the use of an MSIS (mechanically scanned imaging sonar) for relative positioning of a robot with respect to the wall. An imaging sonar gathers polar image scans from which depth images (range & bearing) are generated. Depth scans are first processed to extract a line corresponding to the wall (with the Hough transform), which is then tracked by means of an EKF (Extended Kalman Filter) using a static motion model and an implicit measurement equation associating the sensed points to the candidate line. The line estimate is referenced to the robot fixed frame and represented in polar coordinates (rho&thetas) which directly corresponds to the actual distance and relative orientation of the robot with respect to the wall. The proposed system has been tested in simulation as well as in water tank conditions

Pose-based SLAM with probabilistic scan matching algorithm using a mechanical scanned imaging sonar

This paper proposes a pose-based algorithm to solve the full SLAM problem for an autonomous underwater vehicle (AUV), navigating in an unknown and possibly unstructured environment. The technique incorporate probabilistic scan matching with range scans gathered from a mechanical scanning imaging sonar (MSIS) and the robot dead-reckoning displacements estimated from a Doppler velocity log (DVL) and a motion reference unit (MRU). The proposed method utilizes two extended Kalman filters (EKF). The first, estimates the local path travelled by the robot while grabbing the scan as well as its uncertainty and provides position estimates for correcting the distortions that the vehicle motion produces in the acoustic images. The second is an augment state EKF that estimates and keeps the registered scans poses. The raw data from the sensors are processed and fused in-line. No priory structural information or initial pose are considered. The algorithm has been tested on an AUV guided along a 600 m path within a marina environment, showing the viability of the proposed approach