Determining the material properties for heavily over-consolidated bagasse through parameter estimation

A better understanding of the behaviour of prepared cane and bagasse, and the ability to model the mechanical behaviour of bagasse as it is squeezed in a milling unit to extract juice, would help identify how to improve the current process. For example, there are opportunities to decrease bagasse moisture from a milling unit. Also, the behaviour of bagasse in chutes is poorly understood. Previous investigations have shown that juice flow through bagasse obeys Darcy’s permeability law, that the grip of the rough surface of the grooves on the bagasse can be represented by the Mohr-Coulomb failure criterion for soils, and that the internal mechanical behaviour of the bagasse is critical state behaviour similar to that for sand and clay. Progress has been made in the last ten years towards implementing a mechanical model for bagasse in finite element software. The objective has been to be able to simulate simple mechanical loading conditions measured in the laboratory, which, when combined together, have a high probability of reproducing the complicated stress conditions in a milling unit. This paper reports on the successful simulation of part of the fifth and final (and most challenging) loading condition, the shearing of heavily over-consolidated bagasse, and determining material property values through the use of powerful and free parameter estimation software.

Building macroscale models from microscale probabilistic models : a general probabilistic approach for nonlinear diffusion and multispecies phenomena

A discrete agent-based model on a periodic lattice of arbitrary dimension is considered. Agents move to nearest-neighbor sites by a motility mechanism accounting for general interactions, which may include volume exclusion. The partial differential equation describing the average occupancy of the agent population is derived systematically. A diffusion equation arises for all types of interactions and is nonlinear except for the simplest interactions. In addition, multiple species of interacting subpopulations give rise to an advection-diffusion equation for each subpopulation. This work extends and generalizes previous specific results, providing a construction method for determining the transport coefficients in terms of a single conditional transition probability, which depends on the occupancy of sites in an influence region. These coefficients characterize the diffusion of agents in a crowded environment in biological and physical processes.

The Australian general public's perceptions of having a personally controlled electronic health record (PCEHR)

Objective The move internationally by Governments and other health providers to encourage patients to have their own electronic personal health record (e-PHRs) is growing exponentially. In Australia the initiative for a personally controlled electronic health record (known as PCEHR) is directed towards the public at large. The first objective of this study then, is to examine how individuals in the general population perceive the promoted idea of having a PCEHR. The second objective is to extend research on applying a theoretically derived consumer technology acceptance model to guide the research. Method An online survey was conducted to capture the perceptions and beliefs about having a PCEHR identified from technology acceptance models and extant literature. The survey was completed by 750 Queensland respondents, 97% of whom did not have a PCEHR at that time. The model was examined using exploratory factor analysis, regressions and mediation tests. Results Findings support eight of the 11 hypothesised relationships in the model. Perceived value and perceived risk were the two most important variables explaining attitude, with perceived usefulness and compatibility being weak but significant. The perception of risk was reduced through partial mediation from trust and privacy concerns. Additionally, web-self efficacy and ease of use partially mediate the relationship between attitude and intentions. Conclusions The findings represent a snapshot of the early stages of implementing this Australian initiative and captures the perceptions of Queenslanders who at present do not have a PCEHR. Findings show that while individuals appreciate the value of having this record, they do not appear to regard it as particularly useful at present, nor is it particularly compatible with their current engagement with e-services. Moreover, they will need to have any concerns about the risks alleviated, particularly through an increased sense of trust and reduction of privacy concerns. It is noted that although the respondents are non-adopters, they do not feel that they lack the necessary web skills to set up and use a PCEHR. To the best of our knowledge this is one of a very limited number of studies that examines a national level implementation of an e-PHR system, where take-up of the PCEHR is optional rather than a centralised, mandated requirement.

A contextualised general systems theory

A system is something that can be separated from its surrounds, but this definition leaves much scope for refinement. Starting with the notion of measurement, we explore increasingly contextual system behaviour, and identify three major forms of contextuality that might be exhibited by a system: (a) between components; (b) between system and experimental method, and; (c) between a system and its environment. Quantum Theory is shown to provide a highly useful formalism from which all three forms of contextuality can be analysed, offering numerous tests for contextual behaviour, as well as modelling possibilities for systems that do indeed display it. I conclude with the introduction of a Contextualised General Systems Theory based upon an extension of this formalism.

Effective diffusivity and evaporative cooling in convective drying of food material

This article presents mathematical models to simulate coupled heat and mass transfer during convective drying of food materials using three different effective diffusivities: shrinkage dependent, temperature dependent and average of those two. Engineering simulation software COMSOL Multiphysics was utilized to simulate the model in 2D and 3D. The simulation results were compared with experimental data. It is found that the temperature dependent effective diffusivity model predicts the moisture content more accurately at the initial stage of the drying, whereas, the shrinkage dependent effective diffusivity model is better for the final stage of the drying. The model with shrinkage dependent effective diffusivity shows evaporative cooling phenomena at the initial stage of drying. This phenomenon was investigated and explained. Three dimensional temperature and moisture profiles show that even when the surface is dry, inside of the sample may still contain large amount of moisture. Therefore, drying process should be carefully dealt with otherwise microbial spoilage may start from the centre of the ‘dried’ food. A parametric investigation has been conducted after the validation of the model.

Occupational and non-occupational risk factors in bladder cancer patients in an industrialized area located in former East-Germany [Berufliche und außerberufliche Risikofaktoren für das Harnblasenkarzinom in einem ehemaligen Industriegebiet der neuen Bundesländer]

Purpose: Several occupational carcinogens are metabolized by polymorphic enzymes. The distribution of the polymorphic enzymes N-acetyltransferase 2 (NAT2; substrates: aromatic amines), glutathione S-transferase M1 (GSTM1; substrates: e.g., reactive metabolites of polycyclic aromatic hydrocarbons), and glutathione S-transferase T1 (GSTT1; substrates: small molecules with 1-2 carbon atoms) were investigated. Material and Methods: At the urological department in Lutherstadt Wittenberg, 136 patients with a histologically proven transitional cell cancer of the urinary bladder were investigated for all occupations performed for more than 6 months. Several occupational and non-occupational risk factors were asked. The genotypes of NAT2, GSTM1, and GSTT1 were determined from leucocyte DNA by PCR. Results: Compared to the general population in Middle Europe, the percentage of GSTT1 negative persons (22.1 %) was ordinary; the percentage of slow acetylators (59.6%) was in the upper normal range, while the percentage of GSTM1 negative persons (58.8%) was elevated in the entire group. Shifts in the distribution of the genotypes were observed in subgroups who had been exposed to asbestos (6/6 GSTM1 negative, 5/6 slow acetylators), rubber manufacturing (8/10 GSTM1 negative), and chlorinated solvents (9/15 GSTM1 negative). Conclusions: The overrepresentation of GSTM1 negative bladder cancer patients also in this industrialized area and more pronounced in several occupationally exposed subgroups points to an impact of the GSTM1 negative genotype in bladder carcinogenesis. [Article in German]

Cyclododecane as support material for clean and facile transfer of large-area few-layer graphene

The transfer of chemical vapor deposited graphene is a crucial process, which can affect the quality of the transferred films and compromise their application in devices. Finding a robust and intrinsically clean material capable of easing the transfer of graphene without interfering with its properties remains a challenge. We here propose the use of an organic compound, cyclododecane, as a transfer material. This material can be easily spin coated on graphene and assist the transfer, leaving no residues and requiring no further removal processes. The effectiveness of this transfer method for few-layer graphene on a large area was evaluated and confirmed by microscopy, Raman spectroscopy, x-ray photoemission spectroscopy, and four-point probe measurements. Schottky-barrier solar cells with few-layer graphene were fabricated on silicon wafers by using the cyclododecane transfer method and outperformed reference cells made by standard methods.

Healthcare channel consumer insights : supermarkets, pharmacy & general practitioners

Why are consumers different: Heterogeneity in the way consumers categorise products and services – Snack Food Influenced by the individual needs, personal traits, values and goals – Blood Donation Consumers base their choices on information from external sources and prior experiences stored in memory. Intrinsic – prior experience Extrinsic – advertising, blogs, etc

Discharge practices for the intensive care patient : a qualitative exploration in the general ward setting

OBJECTIVE: To explore how registered nurses (RNs) in the general ward perceive discharge processes and practices for patients recently discharged from the intensive care unit (ICU). BACKGROUND: Patients discharged from the ICU environment often require complicated and multifaceted care. The ward-based RN is at the forefront of the care of this fragile patient population, yet their views and perceptions have seldom been explored. DESIGN: A qualitative grounded theory design was used to guide focus group interviews with the RN participants. METHODS: Five semi-structured focus group interviews, including 27 RN participants, were conducted in an Australian metropolitan tertiary referral hospital in 2011. Data analyses of transcripts, field notes and memos used concurrent data generation, constant comparative analysis and theoretical sampling. RESULTS: Results yielded a core category of 'two worlds' stressing the disconnectedness between ICU and the ward setting. This category was divided into sub categories of 'communication disconnect' and 'remember the family'. Properties of 'what we say', 'what we write', 'transfer' and 'information needs' respectively were developed within those sub-categories. CONCLUSION: The discharge process for patients within the ICU setting is complicated and largely underappreciated. There are fundamental, misunderstood differences in prioritisation and care of patients between the areas, with a deep understanding of practice requirements of ward based RNs not being understood. The findings of this research may be used to facilitate inter departmental communications and progress practice development.

OHS inspectors and psychosocial risk factors: Evidence from Australia

Legislation giving prominence to psychosocial risk factors at work has changed the role of government occupational health and safety (OHS) inspectors in many countries. Yet little is known about how inspectorates have responded to these changes. Between 2003 and 2007 an Australian study was undertaken on OHS standards, entailing detailed documentary analysis, interviews with 36 inspectorate managers and 89 inspectors, and observations made when researchers accompanied inspectors on 120 typical workplace visits. Our study found that general duty provisions in OHS legislation clearly incorporated psychosocial hazards and inspectorates had introduced guidance material, pursued campaigns and increased interventions in this area. However, the regulatory framework remained narrow (focused on bullying/harassment, occupational violence and work stress) and workplace visits revealed psychosocial hazards as a marginal area of inspectorate activity. These findings were reinforced in interviews. While aware of psychosocial hazards inspectors often saw the issue as problematic due to limited training, resourcing constraints, deficiencies in regulation and fears of victimisation amongst workers. In order to address these problems a number of changes are required that recognize the distinctiveness of psychosocial hazards including their ‘invisibility’. Notable here are revisions to regulation (both general duty provisions and specific codes), the development of comprehensive guidance and assessment tools to be used by inspectors, greater use of procedural enforcement, and enhanced inspectorate resourcing and training. There is also a need to recognize complex inter-linkages between psychosocial hazards and the industrial relations context.

Thin films and nanostructures of niobium pentoxide : fundamental properties, synthesis methods and applications

As one of the transition metal oxides, niobium pentoxide (Nb2O5) offers a broad variety of properties that make it a potentially useful and highly applicable material in many different areas. In comparison to many other transition metal oxides, Nb2O5 has received relatively little attention, which presents a significant opportunity for future investigations aimed at fundamentally understanding this material and finding new and interesting applications for it. In this article, a general overview of Nb2O5 is presented which focuses on its fundamental properties, synthesis methods and recent applications, along with a discussion on future research directions relevant to this material.