Heat Activated Prestressing of Shape Memory Alloys for Active Confinement of Concrete Sections

This paper presents the results from the experimental investigation on heat activated prestressing of Shape Memory Alloy (SMA) wires for active confinement of concrete sections. Active confinement of concrete is found to be much more effective than passive confinement which becomes effective only when the concrete starts to dilate. Active confinement achieved using conventional prestressing techniques often faces many obstacles due to practical limitations. A class of smart materials that has recently drawn attention in civil engineering is the super elastic SMA which has the ability to undergo reversible hysteretic shape change known as the shape memory effect. The shape memory effect of SMAs can be utilized to develop a convenient prestressing technique for active confinement of concrete sections.
In this study a series of experimental tests are conducted to study Heat Activated Prestress (HAP) in SMAs. Three different types of tests are conducted with different loading protocol to determine parameters such as HAP, residual strain after heating and range of strain that can be used for effective active confinement after HAP. Test results show a maximum HAP of about 500 MPa can be achieved after heating and approximately 450MPa is retained at 25oC in specimens pre-strained by 6%. A substantial amount of strain recovery upon unloading and after heating the SMA wires is recorded. About 2.5% elastic strain recovery upon unloading from 6% strain level is observed. In the specimen pre-strained by 6%, a total of 4% strain is recovered when unloaded after heating. A strain range of 3% is found available for effective confinement after HAP. Test results demonstrate that SMAs have unique features that can be intelligently employed in many civil engineering applications including active confinement of concrete sections.

Besov spaces and the Laplacian on fractal H-sets

Nesta tese são estudados espaços de Besov de suavidade generalizada em espaços euclidianos, numa classe de fractais designados conjuntos-h e em estruturas abstractas designadas por espaços-h. Foram obtidas caracterizações e propriedades para estes espaços de funções. Em particular, no caso de espaços de Besov em espaços euclidianos, foram obtidas caracterizações por diferenças e por decomposições em átomos não suaves, foi provada uma propriedade de homogeneidade e foram estudados multiplicadores pontuais. Para espaços de Besov em conjuntos-h foi obtida uma caracterização por decomposições em átomos não suaves e foi construído um operador extensão. Com o recurso a cartas, os resultados obtidos para estes espaços de funções em fractais foram aplicados para definir e trabalhar com espaços de Besov de suavidade generalizada em estruturas abstractas. Nesta tese foi também estudado o laplaciano fractal, considerado a actuar em espaços de Besov de suavidade generalizada em domínios que contêm um conjunto-h fractal. Foram obtidos resultados no contexto de teoria espectral para este operador e foi estudado, à custa deste operador, um problema de Dirichlet fractal no contexto de conjuntos-h.

Estimação robusta em modelos lineares de equações simultâneas

Os Modelos de Equações Simultâneas (SEM) são modelos estatísticos com muita tradição em estudos de Econometria, uma vez que permitem representar e estudar uma vasta gama de processos económicos. Os estimadores mais usados em SEM resultam da aplicação do Método dos Mínimos Quadrados ou do Método da Máxima Verosimilhança, os quais não são robustos. Em Maronna e Yohai (1997), os autores propõem formas de “robustificar” esses estimadores. Um outro método de estimação com interesse nestes modelos é o Método dos Momentos Generalizado (GMM), o qual também conduz a estimadores não robustos. Estimadores que sofrem de falta de robustez são muito inconvenientes uma vez que podem conduzir a resultados enganadores quando são violadas as hipóteses subjacentes ao modelo assumido. Os estimadores robustos são de grande valor, em particular quando os modelos em estudo são complexos, como é o caso dos SEM. O principal objectivo desta investigação foi o de procurar tais estimadores tendo-se construído um estimador robusto a que se deu o nome de GMMOGK. Trata-se de uma versão robusta do estimador GMM. Para avaliar o desempenho do novo estimador foi feito um adequado estudo de simulação e foi também feita a aplicação do estimador a um conjunto de dados reais. O estimador robusto tem um bom desempenho nos modelos heterocedásticos considerados e, nessas condições, comporta-se melhor do que os estimadores não robustos usados no estudo. Contudo, quando a análise é feita em cada equação separadamente, a especificidade de cada equação individual e a estrutura de dependência do sistema são dois aspectos que influenciam o desempenho do estimador, tal como acontece com os estimadores usuais. Para enquadrar a investigação, o texto inclui uma revisão de aspectos essenciais dos SEM, o seu papel em Econometria, os principais métodos de estimação, com particular ênfase no GMM, e uma curta introdução à estimação robusta.

Medical information extraction in European Portuguese

The electronic storage of medical patient data is becoming a daily experience in most of the practices and hospitals worldwide. However, much of the data available is in free-form text, a convenient way of expressing concepts and events, but especially challenging if one wants to perform automatic searches, summarization or statistical analysis. Information Extraction can relieve some of these problems by offering a semantically informed interpretation and abstraction of the texts. MedInX, the Medical Information eXtraction system presented in this document, is the first information extraction system developed to process textual clinical discharge records written in Portuguese. The main goal of the system is to improve access to the information locked up in unstructured text, and, consequently, the efficiency of the health care process, by allowing faster and reliable access to quality information on health, for both patient and health professionals. MedInX components are based on Natural Language Processing principles, and provide several mechanisms to read, process and utilize external resources, such as terminologies and ontologies, in the process of automatic mapping of free text reports onto a structured representation. However, the flexible and scalable architecture of the system, also allowed its application to the task of Named Entity Recognition on a shared evaluation contest focused on Portuguese general domain free-form texts. The evaluation of the system on a set of authentic hospital discharge letters indicates that the system performs with 95% F-measure, on the task of entity recognition, and 95% precision on the task of relation extraction. Example applications, demonstrating the use of MedInX capabilities in real applications in the hospital setting, are also presented in this document. These applications were designed to answer common clinical problems related with the automatic coding of diagnoses and other health-related conditions described in the documents, according to the international classification systems ICD-9-CM and ICF. The automatic review of the content and completeness of the documents is an example of another developed application, denominated MedInX Clinical Audit system.

Avaliação em contextos de blended learning no ensino superior

The increasing complexity of the Information Society and the Bologna Declaration in the European context has led Higher Education (HE) institutions to revise their curricula courses, as far as the adoption of new strategies for teaching and learning as well as evaluation are concerned. It can also be emphasized that there has been a growing use of eLearning and of blended learning (bLearning) in HE, since these modes of training seem to be a very convenient option for lifelong learning. In this context, quality is taken as an essential goal in the development of the European Space for Education and Training, where HE institutions compete among themselves, and where evaluation is determinant as a promoter of this quality. Considering the problems summarized above, the research developed, based on four published scientific papers, intended to answer a set of research questions related to evaluation of bLearning contexts in HE. The study used diverse techniques and instruments (questionnaires, document analysis, and observation mediated technologies) spanning two methodological approaches: i) study of descriptive and exploratory nature and ii) case studies of bLearning modules. In the first approach an evaluation model for bLearning courses was developed, where we collected and analyzed, at a national level, the opinions of teachers with bLearning experience about the model dimensions. The case studies presented are post graduation curricular units, where bLearning teaching, learning and evaluation strategies were explored and evaluated, namely peer assessment. The main contributions of the first approach are: the process of questioning around the evaluation of bLearning courses, namely the quality assurance criteria for bLearning, as well as the model developed, providing a framework of theoretical, methodological and empirical elements that can be adapted in similar contexts. From the case studies emerged: the developed evaluation guidelines and the data collection instruments, in order to disseminate evaluation “best practices” that may be useful for other units in similar contexts. Regarding the recommendations about the evaluation of teaching of bLearning courses we emphasize: the use of versatile evaluation objects; the evaluation throughout the process and not just at the end; and the involvement of multiple evaluators, including students (whose feedback is essential to monitor the quality of teaching and learning). From the case studies we highlight: the need for discussion of evaluation frameworks to explore, and consequent increase in the transparency of the evaluation process; the increased interaction between groups; and the peer assessment as a strategy to promote active and autonomous learning. In addition to the contributions and recommendations for practice and research in the area of evaluation in bLearning contexts in HE, listed above, it also emerged from this study useful guidelines regarding educational evaluation in bLearning contexts, in order to improve the quality of teaching, learning and evaluation in such contexts.

Modelling antropogenic impact on primary production of sado estuary

The assessment of human impact on complex estuarine systems is a multidisciplinary task that is highly demanding in terms of measurements and fieldwork. Nowadays the use of inexpensive and reliably modeling tools can substantially reduce the amount of measurements needed to characterize a system. These tools are also a convenient way to forecast the future evolution of the system and to study the impact of different scenarios of human influence. In this communication a modeling system composed by hydrodynamic, transport and ecological models is used to assess the current trophic state of Sado Estuary (Portugal) and to predict the future trends of the system based on different scenarios of human intervention. Special care is taken to the impact of changing riverine nutrient loads. Sado estuary is a large European estuary that has been considered until now in good trophic conditions with eutrophication appearing only in some isolated spots. Nevertheless in recent years some studies point out that the situation is changing. Sado estuary is a system with strong environmental opposing interests. It hosts a major industrial and urban center around the city of Setúbal and the upper reaches are used to intensive cultures such as rice. On the other hand the estuary possess an important ecological value since it is used by several important species of fish as a spawning and nursery area and it’s wetlands are used by many species of birds as winter shelters. Due to it’s importance the majority of Sado Estuary is considered as Natural Reserve.

Golf destinations' brand personality: the case of the Algarve

The purpose of this research is to develop and validate a measurement scale to assess golf destinations’ brand personality and therefore to perceive the destination personality of the Algarve as a golf destination. Based on literature review on human personality, brand personality, destination brand image and marketing scales validation procedures, an initial 36 unrepeated items were the base for a survey instrument. Those items were generated from the literature, from the results of individual interviews with experts in tourism and golf in the Algarve and from promotional texts in golf- related websites. After content validation, the items were allocated into categories of attributes by a panel of expert judges. A survey was then applied to a convenient sample of 600 golf players in the Algarve, and 545 (valid) questionnaires were analysed to refine the scale. Golf players assessed the components of the relational brand personality (functional, symbolic and experiential) as well as the Algarve as a golf destination. A taxonomy of brand personality was developed and tested in the Algarve as it is recognized as one of the world best golf destination. The developed taxonomy of brand personality was assessed in two ways: 1) through the overall perception of the Algarve as a golf destination and 2) through the perception of specific attributes of the destination grouped into three main categories (functional, symbolic and experiential). Therefore, two multi-dimensional brand personality models were estimated by using structural equation modelling. Findings of this study indicate that golf players ascribe personality characteristics to destinations. The brand personality of the Algarve is translated into three main dimensions enjoyableness, distinctiveness and friendliness when tourists/golf players reveal their overall perception of the destination. The brand personality of golf destination Algarve is reflected in the dimensions reliability, hospitality, uniqueness and attractiveness when tourists assess the components of the relational brand personality. Refined scales consisting of 10 and 12 items were finally derived meeting both reliability and validity requirements. This study does not replicate Aaker’s (1997) personality dimensions and very little parallelism can be drawn with Aaker’s (1997) brand personality scale since only three items from her scale were validated in both models: friendly and cheerful, (sincerity), reliable (competence). The same is verified concerning the ‘Big-five’. The human personality traits (HPT) validated to describe golf destinations personality are only four helpful, pleasant (agreeableness), relaxed (emotional stability), and innovative (intellect or openness). As far as destination image descriptors (DID) are concerned, the items appealing, relaxed and safe were validated, while traits suggested by the interviews and website promotional texts such as calm, natural, spectacular, unique, welcoming, and the best (destination-specific traits) appear to be appropriate to describe the personality of a golf destination. The results suggest that the overall perception of the Algarve´s brand personality is described by the dimensions enjoyableness, distinctiveness and friendliness. Moreover, the relational perspective revealed that the functional attributes of the destination are described by the dimension reliablility, while the symbolic attributes are described by the dimensions hospitablility and uniqueness and finally its experiential attributes are described by the dimension attractiveness. These results show that a golf destination´s brand personality should not just be based on good golf practices. Theoretical and practical implications are discussed in the context of destination brand personality.

Development of new approaches for the synthesis and decoding of one-bead one-compound cyclic peptide libraries

La plupart des processus cellulaires et biologiques reposent, à un certain niveau, sur des interactions protéine-protéine (IPP). Leur manipulation avec des composés chimiques démontre un grand potentiel pour la découverte de nouveaux médicaments. Malgré la demande toujours croissante en molécules capables d’interrompre sélectivement des IPP, le développement d’inhibiteurs d’IPP est fortement limité par la grande taille de la surface d’interaction. En considérant la nature de cette surface, la capacité à mimer des structures secondaires de protéines est très importante pour lier une protéine et inhiber une IPP. Avec leurs grandes capacités peptidomimétiques et leurs propriétés pharmacologiques intéressan-tes, les peptides cycliques sont des prototypes moléculaires de choix pour découvrir des ligands de protéines et développer de nouveaux inhibiteurs d’IPP. Afin d’exploiter pleinement la grande diversité accessible avec les peptides cycliques, l’approche combinatoire «one-bead-one-compound» (OBOC) est l’approche la plus accessible et puissante. Cependant, l’utilisation des peptides cycliques dans les chimiothèques OBOC est limitée par les difficultés à séquencer les composés actifs après le criblage. Sans amine libre en N-terminal, la dégradation d’Edman et la spectrométrie de masse en tandem (MS/MS) ne peuvent pas être utilisées. À cet égard, nous avons développé de nouvelles approches par ouverture de cycle pour préparer et décoder des chimiothèques OBOC de peptides cycliques. Notre stratégie était d’introduire un résidu sensible dans le macrocycle et comme ancrage pour permettre la linéarisation des peptides et leur largage des billes pour le séquençage par MS/MS. Tout d’abord, des résidus sensibles aux nucléophiles, aux ultraviolets ou au bromure de cyanogène ont été introduits dans un peptide cyclique et leurs rendements de clivage évalués. Ensuite, les résidus les plus prometteurs ont été utilisés dans la conception et le développement d’approches en tandem ouverture de cycle / clivage pour le décodage de chimiothèques OBOC de peptides cycliques. Dans la première approche, une méthionine a été introduite dans le macrocycle comme ancrage pour simultanément permettre l’ouverture du cycle et le clivage des billes par traitement au bromure de cyanogène. Dans la seconde approche, un résidu photosensible a été utilisé dans le macrocycle comme ancrage pour permettre l’ouverture du cycle et le clivage suite à une irradiation aux ultraviolets. Le peptide linéaire généré par ces approches peut alors être efficacement séquencé par MS/MS. Enfin, une chimiothèque OBOC a été préparée et criblée la protéine HIV-1 Nef pour identifier des ligands sélectifs. Le développement de ces méthodologies permttra l’utilisation de composés macrocycliques dans les chimiothèques OBOC et constitue une contribution importante en chimie médicinale pour la découverte de ligands de protéines et le développement d’inhibiteurs d’IPP.

Old conflicts, new rivals? Airline competition in the European market

Christoph Franz of Lufthansa recently identified Ryanair, easyJet, Air Berlin and Emirates as the company’s main competitors – gone are the days when it could benchmark itself against BA or Air France-KLM! This paper probes behind the headlines to assess the extent to which different airlines are in competition, using evidence from the UK and mainland European markets. The issue of route versus network competition is addressed. Many regulators have put an emphasis on the former whereas the latter, although less obvious, can be more relevant. For example, BA and American will cease to compete between London and Dallas Fort Worth if their alliance obtains anti-trust immunity but 80% of the passengers on this route are connecting at one or both ends and hence arguably belong to different markets (e.g. London-San Francisco, Zurich-Dallas, Edinburgh-New Orleans) which may be highly contested. The remaining 20% of local traffic is actually insufficient to support a single point to point service in its own right. Estimates are made of the seat capacity major airlines are offering to the local market as distinct from feeding other routes. On a sector such as Manchester–Amsterdam, 60% of KLM’s passengers are transferring at Schiphol as against only 1% of bmibaby’s. Thus although KLM operates 5 flights and 630 seats per day against bmibaby’s 2 flights and 298 seats, in the point to point market bmibaby offers more seats than KLM. The growth of the Low Cost Carriers (LCCs) means that competition increasingly needs to be viewed on city pair markets (e.g. London-Rome) rather than airport pair markets (e.g. Heathrow-Fiumicino). As the stronger LCCs drive out weaker rivals and mainline carriers retrench to their major hubs, some markets now have fewer direct options than existed prior to the low cost boom. Timings and frequencies are considered, in particular the extent to which services are a true alternative especially for business travellers. LCCs typically offer lower frequencies and more unsociable timings (e.g. late evening arrivals at remote airports) as they are more focused on providing the cheapest service rather than the most convenient schedule. Interesting findings on ‘monopoly’ services are presented (including alliances) - certain airlines have many more of these than others. Lufthansa has a significant number of sectors to itself whereas at the other extreme British Airways has direct competition on almost every route in its network. Ryanair and flybe have a higher proportion of monopoly routes than easyJet or Air Berlin. In the domestic US market it has become apparent since deregulation that better financial returns can come from dominating a large number of smaller markets rather than being heavily exposed in the major markets - which are hotly fought over. Regional niches that appear too thin for Ryanair to serve (with its all 189 seat 737-800 fleet) are identified. Fare comparisons in contrasting markets provide some insights to marketing and pricing strategies. Data sources used include OAG (schedules and capacity), AEA (traditional European airlines traffic by region), the UK CAA (airport, airline and route traffic plus survey information of passenger types) and ICAO (international route traffic and capacity by carrier). It is concluded that airlines often have different competitors depending on the context but in surprisingly many cases there are actually few or no direct substitutes. The competitive process set in train by deregulation of European air services in the 1990s is leading back to one of natural monopolies and oblique alternatives. It is the names of the main participants that have changed however!

A actual regulação do crédito ao consumo

"Consumidores somos todos nós como impressivamente se ex­pressou John F. Kennedy em 15 de Março de 1962. E diríamos que "consumidores de credito "somos muitos. É neste contexto que assume especial relevância a recente aprovação, no nosso ordenamento jurídico, de nova normativa reguladora do crédito ao consumo. Por outro lado, será de realçar o comando consti­tucional que prevê a protecção dos consumidores. De facto, prescreve o artigo 60° da Constituição da República Portuguesa que "os consu­midores têm direito à qualidade dos bens e serviços consumidos, à for­mação e à informação, à protecção da saúde, da segurança e dos seus interesses económicos, bem como à reparação dos danos". lmporta, pois, conhecer em rigor as normas que actualmente re­gem o acesso e a regulação dos contratos de crédito ao consumo, num contexto de harmonização comunitária deste instituto jurídico-económico. Será oportuno, sobretudo, compreender de que forma o diploma que actualmente rege a matéria em questão protege de modo mais vin­cado a parte considerada economicamente mais débil.

Análise crítica do Regulamento Geral dos Sistemas Públicos e Prediais de Distribuição de Água e de Drenagem de Águas Residuais

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Hidráulica

On a generalized Laguerre operational matrix of fractional integration

A new operationalmatrix of fractional integration of arbitrary order for generalized Laguerre polynomials is derived.The fractional integration is described in the Riemann-Liouville sense.This operational matrix is applied together with generalized Laguerre tau method for solving general linearmultitermfractional differential equations (FDEs).Themethod has the advantage of obtaining the solution in terms of the generalized Laguerre parameter. In addition, only a small dimension of generalized Laguerre operational matrix is needed to obtain a satisfactory result. Illustrative examples reveal that the proposedmethod is very effective and convenient for linear multiterm FDEs on a semi-infinite interval.

Incremental filter and wrapper approaches for feature discretization

Discrete data representations are necessary, or at least convenient, in many machine learning problems. While feature selection (FS) techniques aim at finding relevant subsets of features, the goal of feature discretization (FD) is to find concise (quantized) data representations, adequate for the learning task at hand. In this paper, we propose two incremental methods for FD. The first method belongs to the filter family, in which the quality of the discretization is assessed by a (supervised or unsupervised) relevance criterion. The second method is a wrapper, where discretized features are assessed using a classifier. Both methods can be coupled with any static (unsupervised or supervised) discretization procedure and can be used to perform FS as pre-processing or post-processing stages. The proposed methods attain efficient representations suitable for binary and multi-class problems with different types of data, being competitive with existing methods. Moreover, using well-known FS methods with the features discretized by our techniques leads to better accuracy than with the features discretized by other methods or with the original features. (C) 2013 Elsevier B.V. All rights reserved.

Project, modelling and simulation of air stripping columns for the treatment of groundwater contaminated with volatile organic compounds

Volatile organic compounds are a common source of groundwater contamination that can be easily removed by air stripping in columns with random packing and using a counter-current flow between the phases. This work proposes a new methodology for the column design for any particular type of packing and contaminant avoiding the necessity of a pre-defined diameter used in the classical approach. It also renders unnecessary the employment of the graphical Eckert generalized correlation for pressure drop estimates. The hydraulic features are previously chosen as a project criterion and only afterwards the mass transfer phenomena are incorporated, in opposition to conventional approach. The design procedure was translated into a convenient algorithm using C++ as programming language. A column was built in order to test the models used either in the design or in the simulation of the column performance. The experiments were fulfilled using a solution of chloroform in distilled water. Another model was built to simulate the operational performance of the column, both in steady state and in transient conditions. It consists in a system of two partial non linear differential equations (distributed parameters). Nevertheless, when flows are steady, the system became linear, although there is not an evident solution in analytical terms. In steady state the resulting system of ODE can be solved, allowing for the calculation of the concentration profile in both phases inside the column. In transient state the system of PDE was numerically solved by finite differences, after a previous linearization.

Experimental assessment of pressure drop in air stripping columns

One important step in the design of air stripping operations for the removal of VOC is the choice of operating conditions, which are based in the phase ratio. This parameter sets on directly the stripping factor and the efficiency of the operation. Its value has an upper limit determined by the flooding regime, which is previewed using empirical correlations, namely the one developed by Eckert. This type of approach is not suitable for the development of algorithms. Using a pilot scale column and a convenient solution, the pressure drop was determined in different operating conditions and the experimental values were compared with the estimations. This particular research will be incorporated in a global model for simulating the dynamics of air stripping using a multi variable distributed parameter system.