Suomalaisten osakeyhtiöiden sähköinen tunnistaminen EU:n toimintaympäristössä

Tutkielmassa selvitetään Euroopan Parlamentin sähköisestä tunnistamisesta ja sähköisiin transaktioihin liittyvistä luottamuspalveluista antaman asetusehdotuksen merkitystä sähköisessä tunnistamisessa ja sähköisissä transaktioissa osakeyhtiöiden näkökulmasta yritysten välisessä liiketoiminnassa huomioiden Suomen tämänhetkinen kansallinen lainsäädäntö ja sen kautta omaksutut toimintatavat. Tutkielmassa käytetty pääasiallinen tutkimusmenetelmä on lainoppi. Tutkimusmenetelmänä käytetään myös oikeustaloustieteestä regulaatioteorian normatiivista lähestymistapaa. Tutkielmaa varten on myös haastateltu viranomaisten ja yritysten edustajia. Asetusehdotuksen tavoitteena on edistää rajat ylittävää sähköistä toimintaa. Tätä pyritään lisäämään muun muassa sillä, että jäsenvaltioiden tulee hyväksyä toisessa jäsenvaltiossa käytössä olevia EU:lle ilmoitettuja tunnistusmenetelmiä. Nykyiset direktiivipohjaiseen sääntelyyn perustuvat kansalliset tulkinnat eivät ole johtaneet tavoiteltuun lopputulokseen, joten asetusmuotoinen sääntely on perusteltu. Toimijoina luonnolliset henkilöt ja oikeushenkilöt, kuten osakeyhtiöt, asettavat erilaisia vaatimuksia sähköiselle tunnistamiselle ja sopimusprosessille. Nykymuodossaan asetusehdotus ei sisällöllisesti välttämättä ole taloudellisesti kannattava vaihtoehto yksittäisen EU-valtion kannalta eikä se näin ollen kannusta ilmoittamaan EU:lle tunnistusmenetelmiä eikä yritysten väliseen sähköiseen liiketoimintaan. Tämä johtaa siihen, ettei asetusehdotuksen tavoite välttämättä toteudu.

Mitigating uncertainty in logistics outsourcing with ERP systems

Outsourcing is a common strategy for companies looking for cost savings and improvements in performance. This has been especially prevalent in logistics, where warehousing and transporting are typical targets for outsourcing. However, while the benefits from logistics outsourcing are clear on paper, there are several cases companies fail to reach these benefits. The most commonly cited reasons for this are poor information flow between the company and the third party logistics partner, and a lack of integration between the two partners. Uncertainty stems from lack of information, and it can cripple the whole outsourcing operation. This is where enterprise resource planning (ERP) systems step in, as they can have a significant role in improving the flow of information, and integration, which consequently mitigates uncertainty. The purpose of the study is to examine if ERP systems have an effect on a company's decision to outsource logistics operations. Along the rapid advancements in technology during the past decades, ERP systems have also evolved. Therefore, empirical research on the subject needs constant revision as it can quickly become outdated due to ERP systems having more advanced capabilities every year. The research was conducted using a qualitative single-case study of a Finnish manufacturing firm that had outsourced warehousing and transportation operations in the Swedish market. The empirical data was gathered with use of semi-structured interviews with three employees from the case company that were closely related to the outsourcing operation. The theoretical framework that was used to analyze the empirical data was based on Transaction Cost Economics theory. The results of the study were align with the theoretical framework, in that the ERP system of the case company was seen as an enabler for their logistics outsourcing operation. However, the full theoretical benefits from ERP systems concerning extended enterprise functionality and flexibility were not attained due to the case company having an older version of their ERP system. This emphasizes the importance of having up-to-date technology if you want to overcome the shortcomings of ERP systems in outsourcing situations.

Insiders´ views as a predictor of stock performance : can insider trading be used to predict stock performance on the United States stock market?

This thesis studies the possibility of using information on insiders’ transactions to forecast future stock returns after the implementation of Sarbanes Oxley Act in July 2003. Insider transactions between July 2003 and August 2009 are analysed with regression tests to identify the relationships between insiders’ transactions and future stock returns. This analysis is complemented with rudimentary bootstrapping procedures to verify the robustness of the findings. The underlying assumption of the thesis is that insiders constantly receive pieces of information that indicate future performance of the company. They may not be allowed to trade on large and tangible pieces of information but they can trade on accumulation of smaller, intangible pieces of information. Based on the analysis in the thesis insiders’ profits were found not to differ from the returns from broad stock index. However, their individual transactions were found to be linked to future stock returns. The initial model was found to be unstable but some of the predictive power could be sacrificed to achieve greater stability. Even after sacrificing some predictive power the relationship was significant enough to allow external investors to achieve abnormal profits after transaction costs and taxes. The thesis does not go into great detail about timing of transactions. Delay in publishing insiders’ transactions is not taken into account in the calculations and the closed windows are not studied in detail. The potential effects of these phenomena are looked into and they do not cause great changes in the findings. Additionally the remuneration policy of an insider or a company is not taken into account even though it most likely affects the trading patterns of insiders. Even with the limitations the findings offer promising opportunities for investors to improve their investment processes by incorporating additional information from insiders’ transaction into their decisions. The findings also raise questions on how insider trading should be regulated. Insiders achieve greater returns than other investors based on superior information. On the other hand, more efficient information transfer could warrant more lenient regulation. The fact that insiders’ returns are dominated by the large investment stake they maintain all the time in their own companies also speaks for more leniency. As Sarbanes Oxley Act considerably modified the insider trading landscape, this analysis provides information that has not been available before. The thesis also constitutes a thorough analysis of insider trading phenomenon which has previously been somewhat separated into several studies.

Value of Information Logistics Integration in Digital Business Ecosystem

Digital business ecosystems (DBE) are becoming an increasingly popular concept for modelling and building distributed systems in heterogeneous, decentralized and open environments. Information- and communication technology (ICT) enabled business solutions have created an opportunity for automated business relations and transactions. The deployment of ICT in business-to-business (B2B) integration seeks to improve competitiveness by establishing real-time information and offering better information visibility to business ecosystem actors. The products, components and raw material flows in supply chains are traditionally studied in logistics research. In this study, we expand the research to cover the processes parallel to the service and information flows as information logistics integration. In this thesis, we show how better integration and automation of information flows enhance the speed of processes and, thus, provide cost savings and other benefits for organizations. Investments in DBE are intended to add value through business automation and are key decisions in building up information logistics integration. Business solutions that build on automation are important sources of value in networks that promote and support business relations and transactions. Value is created through improved productivity and effectiveness when new, more efficient collaboration methods are discovered and integrated into DBE. Organizations, business networks and collaborations, even with competitors, form DBE in which information logistics integration has a significant role as a value driver. However, traditional economic and computing theories do not focus on digital business ecosystems as a separate form of organization, and they do not provide conceptual frameworks that can be used to explore digital business ecosystems as value drivers—combined internal management and external coordination mechanisms for information logistics integration are not the current practice of a company’s strategic process. In this thesis, we have developed and tested a framework to explore the digital business ecosystems developed and a coordination model for digital business ecosystem integration; moreover, we have analysed the value of information logistics integration. The research is based on a case study and on mixed methods, in which we use the Delphi method and Internetbased tools for idea generation and development. We conducted many interviews with key experts, which we recoded, transcribed and coded to find success factors. Qualitative analyses were based on a Monte Carlo simulation, which sought cost savings, and Real Option Valuation, which sought an optimal investment program for the ecosystem level. This study provides valuable knowledge regarding information logistics integration by utilizing a suitable business process information model for collaboration. An information model is based on the business process scenarios and on detailed transactions for the mapping and automation of product, service and information flows. The research results illustrate the current cap of understanding information logistics integration in a digital business ecosystem. Based on success factors, we were able to illustrate how specific coordination mechanisms related to network management and orchestration could be designed. We also pointed out the potential of information logistics integration in value creation. With the help of global standardization experts, we utilized the design of the core information model for B2B integration. We built this quantitative analysis by using the Monte Carlo-based simulation model and the Real Option Value model. This research covers relevant new research disciplines, such as information logistics integration and digital business ecosystems, in which the current literature needs to be improved. This research was executed by high-level experts and managers responsible for global business network B2B integration. However, the research was dominated by one industry domain, and therefore a more comprehensive exploration should be undertaken to cover a larger population of business sectors. Based on this research, the new quantitative survey could provide new possibilities to examine information logistics integration in digital business ecosystems. The value activities indicate that further studies should continue, especially with regard to the collaboration issues on integration, focusing on a user-centric approach. We should better understand how real-time information supports customer value creation by imbedding the information into the lifetime value of products and services. The aim of this research was to build competitive advantage through B2B integration to support a real-time economy. For practitioners, this research created several tools and concepts to improve value activities, information logistics integration design and management and orchestration models. Based on the results, the companies were able to better understand the formulation of the digital business ecosystem and the importance of joint efforts in collaboration. However, the challenge of incorporating this new knowledge into strategic processes in a multi-stakeholder environment remains. This challenge has been noted, and new projects have been established in pursuit of a real-time economy.

[Kirjallisuutta]

Kirjallisuusarvostelu

Tuotannon make or buy– päätöksentekoprosessi kansainvälisessä teknologiayrityksessä Case: Yritys X

Tutkimuksen tarkoituksena tutkia millaisia make or buy- työkaluja on olemassa ja millaiset teoriat vaikuttavat make or buy- päätösten taustalla. Tutkimuksessa tutkittiin myös miten nämä ilmiöt ja mallit vaikuttavat ja toteutuvat käytännössä teknologia-alalla

Asiakkuudenhallinnan kehittäminen

Opinnäytetyön toimeksiantaja on suomalainen maatalouskonekaupan moniosaaja, jonka pääasiallisiin liiketoimiin kuuluu maatalouskoneiden maahantuonti, niiden myynti edelleen Suomessa sekä kannattavan rehuntekoketjun tarjoaminen asiakkailleen periaatteella ”nurmesta maitolasiin”. Työn tavoitteena oli avustaa perheyritystä sen asiakashallintaohjelmiston käyttöön ottamisessa. Työn ensimmäinen tavoite oli määrittää yrityksen asiakkuudenhallintaohjelmiston vaatimukset. Toinen tavoite oli selvittää yrityksen asiakashallinnan tämänhetkinen tila. Kolmas tavoite oli selvittää jo nykyisin käytössä olevan ohjelmiston taipuisuutta ja sen soveltuvuutta asiakkuudenhallintaohjelmistona. Työ on toteutettu kvalitatiivista tutkimusta apuna käyttäen, ja analyysiaineisto on kerätty sekundaarisista lähteistä, lähinnä kirjallisista teoksista sekä internetistä. Yrityksen henkilöstö on ollut sisäisen tiedon lähteenä. Opinnäytetyö auttaa toimeksiantajayritystä CRM – projektin tavoitteiden, mahdollisuuksien sekä mahdollisten hidasteiden selvittämisessä. Työn tuloksien avulla projektijohto voi määrittää ohjelmiston CRM – osuuden käyttöönottoon sekä aikatauluun vaadittavat resurssit.

Craft distillery internationalization - Case: Kyrö Distillery Company

The purpose of this thesis is to identify attractive foreign markets for Kyrö Distillery Company. A small company with limited resources, it needs to make the right choices in their internationalization process to be able to succeed. Market research is needed. The amassed theory at the beginning gives insight and a general framework that we follow later in the empirical part; should they go abroad, where should the go and how are answered. After analyzing the company, the industry and all the necessary forces affecting the environment it was evident that they are ready to start their internationalization process and that the time is opportune. They have a quality brand that will not shy away even under closer inspection and their biggest impediment is access to distribution channels. After concluding that the company is fit to enter foreign markets a system of ranking countries in our target region was formed. Market data was painstakingly collected and analyzed resulting in an a priori list of attractive foreign market options to aid in the company's decision making. Finally we concluded that according to the transaction cost theory, it is beneficial for Kyrö Distillery Company to engage in partnerships, where local companies handle logistics and sales on their behalf.

Jalkaväkiprikaatin kenttäviestijärjestelmän tekniset ratkaisut 2010-luvulla

Alueellisilla joukoilla luodaan koko maan kattava puolustus, tärkeimpänä tehtävänään avainalueiden puolustaminen kaikissa olosuhteissa. Tärkeimpiä alueellisia joukkoja ovat jalkaväkiprikaatit, joiden tehtävinä ovat kohteiden suojaus, toimintakyvyn säilyttäminen ja vihollisen pääsyn estäminen valtakuntamme kannalta tärkeille alueille. Jalkaväkiprikaatin viestitoiminnan päämääränä on mahdollistaa tiedustelun, tulenkäytön, johtamisen ja ilmapuolustuksen yhteyksien rakentaminen oikealle alueelle oikeaan aikaan. Nykyinen jalkaväkiprikaatin käytössä oleva kenttäviestijärjestelmä ei vastaa taistelukentän tiedonsiirtotarpeisiin, jonka takia on ryhdyttävä uusimaan kalustoa. Kaupallisten ratkaisujen käyttö osana sotilasverkkoja on ollut kansainvälinen suuntaus jo pidemmän aikaa, nyt COTS- tuotteiden käyttö on laajentunut myös Suomen sodanajan johtamisjärjestelmiin. Tutkimuksessa käsitellään jalkaväkiprikaatin kenttäviestijärjestelmää, viestijoukkojen kokoonpanoa ja tehtäviä sekä TETRAn, WiMAXin, WLANin ja optisen kuidun teknisiä ominaisuuksia ja käyttömahdollisuuksia nykyisessä järjestelmässä. Vertailupohjana käytetään nykyistä järjestelmäratkaisua, uudemmilta joukkotyypeiltä vapautuvaa YVI- kalustoa sekä kaupallisia ratkaisuja. Tutkimus keskittyy kartoittamaan MIL- ja COTS- tuotteiden käyttömahdollisuuksia nykyisin käytössä olevan kenttäviestijärjestelmän eri tasoilla. Tutkimus on toteutettu kirjallisuustutkimuksena, lähteinä tutkimuksessa on käytetty aihetta käsitteleviä oppaita, opinnäytetöitä, asiakirjoja ja internetin tietokantoja.

Readout architectures for hybrid pixel detector readout chips

The original contribution of this thesis to knowledge are novel digital readout architectures for hybrid pixel readout chips. The thesis presents asynchronous bus-based architecture, a data-node based column architecture and a network-based pixel matrix architecture for data transportation. It is shown that the data-node architecture achieves readout efficiency 99% with half the output rate as a bus-based system. The network-based solution avoids “broken” columns due to some manufacturing errors, and it distributes internal data traffic more evenly across the pixel matrix than column-based architectures. An improvement of > 10% to the efficiency is achieved with uniform and non-uniform hit occupancies. Architectural design has been done using transaction level modeling (TLM) and sequential high-level design techniques for reducing the design and simulation time. It has been possible to simulate tens of column and full chip architectures using the high-level techniques. A decrease of > 10 in run-time is observed using these techniques compared to register transfer level (RTL) design technique. Reduction of 50% for lines-of-code (LoC) for the high-level models compared to the RTL description has been achieved. Two architectures are then demonstrated in two hybrid pixel readout chips. The first chip, Timepix3 has been designed for the Medipix3 collaboration. According to the measurements, it consumes < 1 W/cm^2. It also delivers up to 40 Mhits/s/cm^2 with 10-bit time-over-threshold (ToT) and 18-bit time-of-arrival (ToA) of 1.5625 ns. The chip uses a token-arbitrated, asynchronous two-phase handshake column bus for internal data transfer. It has also been successfully used in a multi-chip particle tracking telescope. The second chip, VeloPix, is a readout chip being designed for the upgrade of Vertex Locator (VELO) of the LHCb experiment at CERN. Based on the simulations, it consumes < 1.5 W/cm^2 while delivering up to 320 Mpackets/s/cm^2, each packet containing up to 8 pixels. VeloPix uses a node-based data fabric for achieving throughput of 13.3 Mpackets/s from the column to the EoC. By combining Monte Carlo physics data with high-level simulations, it has been demonstrated that the architecture meets requirements of the VELO (260 Mpackets/s/cm^2 with efficiency of 99%).

The new era of customer experience in the omni-channel environment of a communication service provider

This study discusses the evolution of an omni-channel model in managing customer experience. The purpose of this thesis is to expand the current academic literature available on omni-channel and offer suggestions for omni-channel creation. This is done by studying the features of an omni-channel approach into engaging with customers and through the sub-objectives of describing the process behind its initiation as well as the special features communication service providers need to take in consideration. Theories used as a background for this study are related to customer experience, channel management, omni-channel and finally change management. The empirical study of this thesis consists of seven expert interviews conducted in a case company. The interviews were held between March and November 2014. One of the interviewees is the manager of an omni-channel development team, whilst the rest were in charge of the management of the various customer channels of the company. The organization and analysis of the interview data was conducted topically. The use of themes related to major theories on the subject was utilized to create linkages between theory and practice. The responses were also organized in two groups based on the viewpoint to map responses related to the company perspective as well as the customers´ perspective. The findings in this study are that omni-channel is among the best tools for companies to respond to the challenge induced by changing customer needs and preferences, as well as intensifying competitive environment. The omni-channel model was found to promote excellent customer experience and thus to be a source of competition advantage and increasing financial returns by creating an omni-experience for the customer. Through omniexperience customers see all of the transactions with a company presenting one brand and providing ease and effortlessness in every encounter. The processes behind omni-channel formulation were identified as customer experience proclaimed as the most important strategic goal, mapping and establishing a unified brand experience in all (service) channels and empowering the first line personnel as the gate keepers of omniexperience. Further the tools, measurement and supporting strategies were to be in accordance with the omni-channel strategy and the customer needs to become a partner in a two way transaction with the firm. Based on these findings a model for omni-channel creation is offered. Future research is needed to firstly, further test these findings and expand the theoretical framework on omni-channel, as it is quite scarce to date and secondly, to increase the generalizability of the model suggested.

Roadmap for Service Charging Development

Corporate support functions are increasingly being concentrated into service centers. Service Management principles guide companies in the transition. Service Financial Management is an integral part in supporting the strategic positioning of the service center. The main goal of this thesis is to create a step-by-step plan to improve and automate the service charging processes for the finance service function of the case company. Automating the service transaction data collection for reporting is expected to improve efficiency, reliability and transparency. Interviews with finance service managers are held to define current processes and areas for improvement. These create the basis for the creation of a development roadmap that takes place in two phases. The first phase is to create an environment where automation is possible, and the second phase is the automation of each finance service. Benchmarking interviews are held with the service centers in three other companies to discover best practices. The service charging processes between the studied companies are found incompatible, and suggestions for process automation cannot be inferred. Some implications of Service Financial Management decisions to the strategy of the service center are identified. The bundling of services and charging them inside or outside of the goal-setting frame of the business unit can be used to support the strategic choice and customer acceptance of the service center.

The role of import intermediary companies in the Russian imports from the EU A case study of a Russian industrial company’s point of view on import intermediaries

The literature on agency suggests different implications for the use of export intermediaries. However, only few studies provide a view on import intermediaries. This thesis tries for its part to fill this research gap by studying the import intermediaries in the EU–Russia trade from a Russian industrial company’s point of view. The aim is to describe import intermediation and explain the need for import intermediary companies in the EU–Russia trade. The theoretical framework of this thesis originates from an article by Peng and York (2001), in which they study the performance of export intermediaries. This thesis applies resource-based theory, transaction cost theory and agency cost theory, following the idea of Peng and York. The resource-based theory approach is utilised for describing an ideal import intermediary company, and transaction cost theory provides a basis for understanding the benefits of using the services of import intermediary companies, while agency cost theory is applied in order to understand the risks the Russian industrial company faces when it decides to use the services of import intermediaries. The study is performed in the form of a case interview with a representative of a major Russian metallurgy company. The results of the study suggest that an ideal intermediary has the skills required specifically for the imports process, in order to save time and money of the principal company. The intermediary company helps reducing the amount of time the managers and the staff of the principal company use to make imports possible, thus reducing the salary costs and providing the possibility to concentrate on the company’s core competencies. The benefits of using the services of import intermediary companies are the reduced transaction costs, especially salary costs that are minimised because of the effectiveness and specialisation of import intermediaries. Intermediaries are specialised in the imports process and thus need less time and resources to organise the imports. They also help to reduce the fixed salary costs, because their services can be used only when needed. The risks of being misled by intermediaries are minimised by the competition on the import intermediary market. In case an intermediary attempts fraud, it gets replaced by its rival.

Utilizing analytic modelling process in industrial retail context

Nykypäivän monimutkaisessa ja epävakaassa liiketoimintaympäristössä yritykset, jotka kykenevät muuttamaan tuottamansa operatiivisen datan tietovarastoiksi, voivat saavuttaa merkittävää kilpailuetua. Ennustavan analytiikan hyödyntäminen tulevien trendien ennakointiin mahdollistaa yritysten tunnistavan avaintekijöitä, joiden avulla he pystyvät erottumaan kilpailijoistaan. Ennustavan analytiikan hyödyntäminen osana päätöksentekoprosessia mahdollistaa ketterämmän, reaaliaikaisen päätöksenteon. Tämän diplomityön tarkoituksena on koota teoreettinen viitekehys analytiikan mallintamisesta liike-elämän loppukäyttäjän näkökulmasta ja hyödyntää tätä mallinnusprosessia diplomityön tapaustutkimuksen yritykseen. Teoreettista mallia hyödynnettiin asiakkuuksien mallintamisessa sekä tunnistamalla ennakoivia tekijöitä myynnin ennustamiseen. Työ suoritettiin suomalaiseen teollisten suodattimien tukkukauppaan, jolla on liiketoimintaa Suomessa, Venäjällä ja Balteissa. Tämä tutkimus on määrällinen tapaustutkimus, jossa tärkeimpänä tiedonkeruumenetelmänä käytettiin tapausyrityksen transaktiodataa. Data työhön saatiin yrityksen toiminnanohjausjärjestelmästä.