Readout of a real-time hologram in bacteriorhodopsin film with high diffraction efficiency and intensity

A scheme for the readout of a hologram recorded in bacteriorhodopsin film with high diffraction efficiency and intensity is suggested and demonstrated. Two weak coherent continuous beams function as the recording beams, and a strong light pulse is used to read the real-time hologram. The width of the readout light pulse is modulated to be short compared with the erase time of the reading beam; the time space between two adjacent pulses is ensured to be longer than the time the beams take to recover the hologram, and high diffraction efficiency and intensity (similar to 11 mW/cm(2)) can be obtained. (C) 1996 Optical Society of America.

Effect of absorption on the diffraction efficiency in Fe : LiNbO3 crystal with 90 degrees recording geometry

In this paper the saturated diffraction efficiency has been optimized by considering the effect of the absorption of the recording light on a crossed-beam grating with 90 degrees recording geometry in Fe:LiNbO3 crystals. The dependence of saturated diffraction efficiency on the doping levels with a known oxidation-reduction state, as well as the dependence of saturated diffraction efficiency on oxidation-reduction state with known doping levels, has been investigated. Two competing effects on the saturated diffraction efficiency were discussed, and the intensity profile of the diffracted beam at the output boundary has also been investigated. The results show that the maximal saturated diffraction efficiency can be obtained in crystals with moderate doping levels and modest oxidation state. An experimental verification is performed and the results are consistent with those of the theoretical calculation.

High-efficiency reflective diffraction gratings in fused silica as (de)multiplexers at 1.55 mu m for dense wavelength division multiplexing application

We describe high-efficiency, high-dispersion reflection gratings fabricated in bulk fused Silica illuminated by incident lights in the C + L bands as (de)multiplexers for dense wavelength division multiplexing (DWDM) application. Based on the phenomenon of total internal reflection, gratings with optimized profile parameters exhibit diffraction efficiencies of more than 90% under TM- and TE-polarized incident lights for 101-nm spectral bandwidths (1520-1620 nm) and can reach an efficiency of greater than 97% for both polarizations at a wavelength of 1550 nm. Without loss of metal absorption, without coating of dielectric film layers, and independent of tooth shape, this new kind of grating should be of great interest for DWDM application. (C) 2005 Optical Society of America.

The efficiency of plankton in the utilization of the sun radiation [Translation from: Briroda, 12, 29-35, 1948]

The efficiency of utilisation of the sun's radiation by natural communities has not been properly demonstrated with what so far has been obtained of reliable values, and it represents a great interest in many respects. A systematic study of the biotic balance of lakes was done in the course of a succession of summers starting in 1932, extensive material was obtained, which permitted to compute a value fear the utilisation of the sun's radiation by plankton in lakes, and to compare this with corresponding values for marine plankton and terrestrial vegetation.

Deep-etched high-density fused-silica transmission gratings with high efficiency at a wavelength of 1550 nm

We describe the design, fabrication, and excellent performance of an optimized deep-etched high-density fused-silica transmission grating for use in dense wavelength division multiplexing (DWDM) systems. The fabricated optimized transmission grating exhibits an efficiency of 87.1% at a wavelength of 1550 nm. Inductively coupled plasma-etching technology was used to fabricate the grating. The deep-etched high-density fused-silica transmission grating is suitable for use in a DWDM system because of its high efficiency, low polarization-dependent loss, parallel demultiplexing, and stable optical performance. The fabricated deep-etched high-density fused-silica transmission gratings should play an important role in DWDM systems. (c) 2006 Optical Society of America.

High-efficiency diffraction gratings in fused silica at the wavelength of 632.8 nm

We describe high-efficiency diffraction gratings fabricated in fused silica at the wavelength of 632.8 nm by rigorous coupled-wave analysis (RCWA). High-density holographic gratings, if the groove density falls within the range of 1575-1630 lines/mm and the groove depth within the range of 1.1-1.3 microns, can realize high diffraction efficiencies at the wavelength of 632.8 nm, e.g., the first Bragg diffraction efficiency can theoretically achieve more than 93% both in TE- and TM-polarized incidences, which greatly reduces the polarization-dependent losses. Note that with different groove profiles further optimized, the maximum efficiency of more than 99.69% can be achieved for TM-polarized incidence, or 97.81% for TE-polarized incidence.

Photonic and Device Design Principles for Ultrahigh-Efficiency (>50%), Spectrum-Splitting Photovoltaics

The sun has the potential to power the Earth's total energy needs, but electricity from solar power still constitutes an extremely small fraction of our power generation because of its high cost relative to traditional energy sources. Therefore, the cost of solar must be reduced to realize a more sustainable future. This can be achieved by significantly increasing the efficiency of modules that convert solar radiation to electricity. In this thesis, we consider several strategies to improve the device and photonic design of solar modules to achieve record, ultrahigh (> 50%) solar module efficiencies. First, we investigate the potential of a new passivation treatment, trioctylphosphine sulfide, to increase the performance of small GaAs solar cells for cheaper and more durable modules. We show that small cells (mm2), which currently have a significant efficiency decrease (~ 5%) compared to larger cells (cm2) because small cells have a higher fraction of recombination-active surface from the sidewalls, can achieve significantly higher efficiencies with effective passivation of the sidewalls. We experimentally validate the passivation qualities of treatment by trioctylphosphine sulfide (TOP:S) through four independent studies and show that this facile treatment can enable efficient small devices. Then, we discuss our efforts toward the design and prototyping of a spectrum-splitting module that employs optical elements to divide the incident spectrum into different color bands, which allows for higher efficiencies than traditional methods. We present a design, the polyhedral specular reflector, that has the potential for > 50% module efficiencies even with realistic losses from combined optics, cell, and electrical models. Prototyping efforts of one of these designs using glass concentrators yields an optical module whose combined spectrum-splitting and concentration should correspond to a record module efficiency of 42%. Finally, we consider how the manipulation of radiatively emitted photons from subcells in multijunction architectures can be used to achieve even higher efficiencies than previously thought, inspiring both optimization of incident and radiatively emitted photons for future high efficiency designs. In this thesis work, we explore novel device and photonic designs that represent a significant departure from current solar cell manufacturing techniques and ultimately show the potential for much higher solar cell efficiencies.

Efficiency vs. Stability in a Mixed Network Formation Model

Documentos de Trabajo

4th European Conference on Energy Efficiency and Sustainability in Architecture and Planning : Donostia-San Sebastián, 1-3 Julio 2013

XXXII Cursos de Verano de la UPV/EHU

5th European Conference on Energy Efficiency and Sustainability in Architecture and Planning : Donostia-San Sebastián, 7-9 Julio 2014

XXXIII Cursos de Verano de la UPV/EHU

Paths Towards High Efficiency Silicon Photovoltaics

While photovoltaics hold much promise as a sustainable electricity source, continued cost reduction is necessary to continue the current growth in deployment. A promising path to continuing to reduce total system cost is by increasing device efficiency. This thesis explores several silicon-based photovoltaic technologies with the potential to reach high power conversion efficiencies. Silicon microwire arrays, formed by joining millions of micron diameter wires together, were developed as a low cost, low efficiency solar technology. The feasibility of transitioning this to a high efficiency technology was explored. In order to achieve high efficiency, high quality silicon material must be used. Lifetimes and diffusion lengths in these wires were measured and the action of various surface passivation treatments studied. While long lifetimes were not achieved, strong inversion at the silicon / hydrofluoric acid interface was measured, which is important for understanding a common measurement used in solar materials characterization.

Cryogenic deep reactive ion etching was then explored as a method for fabricating high quality wires and improved lifetimes were measured. As another way to reach high efficiency, growth of silicon-germanium alloy wires was explored as a substrate for a III-V on Si tandem device. Patterned arrays of wires with up to 12% germanium incorporation were grown. This alloy is more closely lattice matched to GaP than silicon and allows for improvements in III-V integration on silicon.

Heterojunctions of silicon are another promising path towards achieving high efficiency devices. The GaP/Si heterointerface and properties of GaP grown on silicon were studied. Additionally, a substrate removal process was developed which allows the formation of high quality free standing GaP films and has wide applications in the field of optics.

Finally, the effect of defects at the interface of the amorphous silicon heterojuction cell was studied. Excellent voltages, and thus efficiencies, are achievable with this system, but the voltage is very sensitive to growth conditions. We directly measured lateral transport lengths at the heterointerface on the order of tens to hundreds of microns, which allows carriers to travel towards any defects that are present and recombine. This measurement adds to the understanding of these types of high efficiency devices and may aid in future device design.

Efficiency, energy and stoichiometry in pelagic food webs; reciprocal roles of food quality and food quantity

In most lakes, zooplankton production is constrained by food quantity, but frequently high C:P poses an additional constraint on zooplankton production by reducing the carbon transfer efficiency from phytoplankton to zooplankton. This review addresses how the flux of matter and energy in pelagic food webs is regulated by food quantity in terms of C and its stoichiometric quality in terms of C:P. Increased levels of light, CO2 and phosphorus could each increase seston mass and, hence, food quantity for zooplankton, but while light and CO2 each cause increased C:P (i.e. reduced food quality for herbivores), increased P may increase seston mass and its stoichiometric quality by reducing C:P. Development of food quality and food quantity in response to C- or P-enrichments will differ between 'batch-type' lakes (dominated by one major, seasonal input of water and nutrients) and 'continuous-culture' types of lakes with a more steady flow-rate of water and nutrients. The reciprocal role of food quantity and stoichiometric quality will depend strongly on facilitation via grazing and recycling by the grazers, and this effect will be most important in systems with low renewal rates. At high food abundance but low quality, there will be a 'quality starvation' in zooplankton. From a management point of view, stoichiometric theory offers a general tool-kit for understanding the integrated role of C and P in food webs and how food quantity and stoichiometric quality (i.e. C:P) regulate energy flow and trophic efficiency from base to top in food webs.From a management point of view, stoichiometric theory offers a general tool-kit for understanding the integrated role of C and P in food webs and how food quantity and stoichiometric quality (i.e. C:P) regulate energy flow and trophic efficiency from base to top in food webs.

Design of a highly stable, high-conversion-efficiency pumping source for optical parametric amplifier by extending efficient crystal length

The objective of this study is to improve the stability of pumping source of optical parametric amplifier. Analysis by simulation leads to the conclusion that the stability of the second harmonic can be improved by using properly the intensity of fundamental light and corresponding length of the crystal. By the method of the noncollinear two-pass second harmonic or the tandem second harmonic, the efficient crystal length is extended to a proper value, and the stability of the second harmonic output has been improved two times more than that for the fundamental light, and the conversion-efficiency is about 70% in experiment. When the variation of the fundamental light is about 10%, the variation of the second harmonic intensity has been controlled within 5%. (c) 2006 Elsevier Ltd. All rights reserved.

6th European Conference on Energy Efficiency and Sustainability in Architecture and Planning

[ES]Esta obra recoge las comunicaciones seleccionadas para el 6º Congreso Europeo sobre Eficiencia Energética y Sostenibilidad en Arquitectura, organizado por el grupo de investigación Calidad de Vida en Arquitectura de la Universidad del País Vasco/Euskal Herriko Unibertsitatea. El congreso, que se celebra en el marco de los XXXIV Cursos de Verano de la UPV/EHU, aborda en esta cuarta edición el tema “Ciudades en riesgo: resiliencia y redundancia”. Alrededor de este tema general se desarrollan cinco ponencias magistrales, a cargo de Margaretha Breil (Centro Euro-Mediterráneo para el Cambio Climático), Cristina Garzillo Leemhuis (ICLEI), Ignasi Fontanals (OptiCits), Juan Carlos Barrios Montenegro (Global Action Plan) y Manuel Valdés López (Ajuntament de Barcelona). Además, 24 comunicaciones seleccionadas por el comité científico presentarán trabajos de investigaciones actuales en las sesiones orales y póster. Es objetivo paralelo del congreso es fortalecer las líneas de investigación en eficiencia energética y sostenibilidad de los grupos de investigación y formación de la UPV/ EHU comprometidos con esta propuesta, con objeto de colaborar en el reforzamiento de la I D i en su ámbito de conocimiento y apoyar la apuesta específica de los Gobiernos Central y Vasco, así como de otras instituciones nacionales e internacionales respecto a las actividades de I D i en las materias relacionadas con el cambio climático, la eficiencia energética y la sostenibilidad ambiental [ENG] This work contains the selected abstracts of the 6th European Conference on Energy Efficiency and Sustainability in Architecture and Planning, organized by the research group Quality of life in Architecture of the University of the Basque Country. The conference is part of the XXXIV Summer Courses of the UPV/EHU and deals, in its fourth edition, with the topic “Cities at risk: resilience and redundancy”. Around this general theme there are five invited speakers: Margaretha Breil (Euro-Mediterranean Centre for Climate Change), Cristina Garzillo Leemhuis (ICLEI), Ignasi Fontanals (OptiCits), Juan Carlos Barrios Montenegro (Global Action Plan) y Manuel Valdés López (Barcelona City Council). 24 abstracts additional have been selected by the scientific committee that offer actual research works in presentations and posters. The purpose of the conferences is to strengthen the investigation lines in energy efficiency and sustainability of the research and education groups of the University of the Basque Country (UPV/EHU) involved, with the purpose of collaborating in the reinforcement of the I D i in its field of knowledge, and support the specific projects of the Central and Basque Governments, as well as other national and international institutions related to the I Di activities in similar fields of climate change, energy efficiency and environmental sustainability.