Impaired GABA Plasticity at ovBNST Synapses Predicts Compulsive Drinking in Schedule-Induced Polydipsia

Schedule-Induced Polydipsia (SIP) is an animal model of adjunctive drinking induced when a hungry rat receives food on a fixed interval of time. This model has been implemented as a model of compulsive behaviour and may represent a powerful tool to understand the neural mechanisms of compulsion. The bed nucleus of the stria terminalis (BNST) is thought to translate challenges to energy homeostasis into consummatory behaviours, and is therefore likely to contribute to drinking behaviours displayed by food restricted rats in the SIP paradigm. Furthermore, the BNST seems implicated in various compulsive behaviors, including compulsive water drinking in rats. Therefore, the goal of this project was to determine whether compulsive drinking in the SIP paradigm was associated with alterations in transmission at oval BNST (ovBNST) synapses. Rats undergoing the SIP procedure had restricted food access (1-hours/day) for a total of 29 days. After 7 days of food restriction and for the next 21 consecutive days, the rats had daily 2-hour access to operant conditioning chambers where they were presented with a 45-mg food pellet every minute. Water consumed during these 2-hour sessions was measured and the rats that drank 15 ml or more water for a minimum of 3 consecutive days were considered High Drinkers (HD; n=17) or otherwise, Low Drinkers (LD; n=13). Brain slices whole-cell patch clamp recordings conducted 18-hours after the last SIP training showed that chronic food restriction changed low frequency stimulation (LFS) - induced long-term potentiation of ovBNST inhibitory synaptic transmission (iLTP) into LFS - induced long-term depression (iLTD) in a majority of neurons, regardless of drinking behaviours. However, ad libitum access to food between the last day of SIP training and brain slice recordings (18-hour refeed) rescued LFS-induced iLTP in LD but not in HD, suggesting that impaired bi-directional plasticity of ovBNST synapses may contribute to compulsive drinking in the SIP paradigm.

Development of An Enhanced Oil Sands Fluid Tailings Generation Model

Bitumen extraction from surface-mined oil sands results in the production of large volumes of Fluid Fine Tailings (FFT). Through Directive 085, the Province of Alberta has signaled that oil sands operators must improve and accelerate the methods by which they deal with FFT production, storage and treatment. This thesis aims to develop an enhanced method to forecast FFT production based on specific ore characteristics. A mass relationship and mathematical model to modify the Forecasting Tailings Model (FTM) by using fines and clay boundaries, as the two main indicators in FFT accumulation, has been developed. The modified FTM has been applied on representative block model data from an operating oil sands mining venture. An attempt has been made to identify order-of-magnitude associated tailings treatment costs, and to improve financial performance by not processing materials that have ultimate ore processing and tailings storage and treatment costs in excess of the value of bitumen they produce. The results on the real case study show that there is a 53% reduction in total tailings accumulations over the mine life by selectively processing only lower tailings generating materials through eliminating 15% of total mined ore materials with higher potential of fluid fines inventory. This significant result will assess the impact of Directive 082 on mining project economic and environmental performance towards the sustainable development of mining projects.

Numerical Modelling of Eddy Current Probes for CANDU® Fuel Channel Inspection

Multi-frequency Eddy Current (EC) inspection with a transmit-receive probe (two horizontally offset coils) is used to monitor the Pressure Tube (PT) to Calandria Tube (CT) gap of CANDU® fuel channels. Accurate gap measurements are crucial to ensure fitness of service; however, variations in probe liftoff, PT electrical resistivity, and PT wall thickness can generate systematic measurement errors. Validated mathematical models of the EC probe are very useful for data interpretation, and may improve the gap measurement under inspection conditions where these parameters vary. As a first step, exact solutions for the electromagnetic response of a transmit-receive coil pair situated above two parallel plates separated by an air gap were developed. This model was validated against experimental data with flat-plate samples. Finite element method models revealed that this geometrical approximation could not accurately match experimental data with real tubes, so analytical solutions for the probe in a double-walled pipe (the CANDU® fuel channel geometry) were generated using the Second-Order Vector Potential (SOVP) formalism. All electromagnetic coupling coefficients arising from the probe, and the layered conductors were determined and substituted into Kirchhoff’s circuit equations for the calculation of the pickup coil signal. The flat-plate model was used as a basis for an Inverse Algorithm (IA) to simultaneously extract the relevant experimental parameters from EC data. The IA was validated over a large range of second layer plate resistivities (1.7 to 174 µΩ∙cm), plate wall thickness (~1 to 4.9 mm), probe liftoff (~2 mm to 8 mm), and plate-to plate gap (~0 mm to 13 mm). The IA achieved a relative error of less than 6% for the extracted FP resistivity and an accuracy of ±0.1 mm for the LO measurement. The IA was able to achieve a plate gap measurement with an accuracy of less than ±0.7 mm error over a ~2.4 mm to 7.5 mm probe liftoff and ±0.3 mm at nominal liftoff (2.42±0.05 mm), providing confidence in the general validity of the algorithm. This demonstrates the potential of using an analytical model to extract variable parameters that may affect the gap measurement accuracy.

Vibrational Feedback Training System for Use with SEMG Controlled Powered Prostheses

Loss of limb results in loss of function and a partial loss of freedom. A powered prosthetic device can partially assist an individual with everyday tasks and therefore return some level of independence. Powered upper limb prostheses are often controlled by the user generating surface electromyographic (SEMG) signals. The goal of this thesis is to develop a virtual environment in which a user can control a virtual hand to safely grasp representations of everyday objects using EMG signals from his/her forearm muscles, and experience visual and vibrotactile feedback relevant to the grasping force in the process. This can then be used to train potential wearers of real EMG controlled prostheses, with or without vibrotactile feedback. To test this system an experiment was designed and executed involving ten subjects, twelve objects, and three feedback conditions. The tested feedback conditions were visual, vibrotactile, and both visual and vibrotactile. In each experimental exercise the subject attempted to grasp a virtual object on the screen using the virtual hand controlled by EMG electrodes placed on his/her forearm. Two metrics were used: score, and time to task completion, where score measured grasp dexterity. It was hypothesized that with the introduction of vibrotactile feedback, dexterity, and therefore score, would improve and time to task completion would decrease. Results showed that time to task completion increased, and score did not improve with vibrotactile feedback. Details on the developed system, the experiment, and the results are presented in this thesis.

THE EFFECT OF PURPOSEFUL MATHEMATICS DISCOURSE IN THE CLASSROOM ON STUDENTS’ MATHEMATICS LANGUAGE IN THE CONTEXT OF PROBLEM SOLVING

This study examines how one secondary school teacher’s use of purposeful oral mathematics language impacted her students’ language use and overall communication in written solutions while working with word problems in a grade nine academic mathematics class. Mathematics is often described as a distinct language. As with all languages, students must develop a sense for oral language before developing social practices such as listening, respecting others ideas, and writing. Effective writing is often seen by students that have strong oral language skills. Classroom observations, teacher and student interviews, and collected student work served as evidence to demonstrate the nature of both the teacher’s and the students’ use of oral mathematical language in the classroom, as well as the effect the discourse and language use had on students’ individual written solutions while working on word problems. Inductive coding for themes revealed that the teacher’s purposeful use of oral mathematical language had a positive impact on students’ written solutions. The teacher’s development of a mathematical discourse community created a space for the students to explore mathematical language and concepts that facilitated a deeper level of conceptual understanding of the learned material. The teacher’s oral language appeared to transfer into students written work albeit not with the same complexity of use of the teacher’s oral expression of the mathematical register. Students that learn mathematical language and concepts better appear to have a growth mindset, feel they have ownership over their learning, use reorganizational strategies, and help develop a discourse community.

Targeting the actin cytoskeleton in HER2+ metastatic cancer cells using a macrolide toxin

Breast and ovarian cancers are among the leading causes of cancer related deaths in women worldwide. In a subset of these cancers, dysregulation of the human epidermal growth factor receptor 2 (HER2) leads to overexpression of the receptor on the cell surface. Previous studies have found that these HER2+ cancers show high rates of progression to metastatic disease. Metastasis is driven by cytoskeletal rearrangements that produce filamentous actin (F-actin) based structures that penetrate and degrade extracellular matrix to facilitate tumour invasion. Advancements in targeted therapy have made F-actin an attractive target for the development of new cancer therapies. In this thesis, we tested the actin-depolymerizing macrolide toxin, Mycalolide B (MycB), as a potential warhead for a novel antibody drug conjugate (ADC) to target highly metastatic HER2+ breast and ovarian cancers. We found that MycB treatment of HER2+ breast (SKBR3, MDA-MB-453) and ovarian (SKOV3) cancer cells led to loss of viability (IC50 values ≤ 64 nM). Sub-lethal doses of MycB treatment caused potent suppression of leading edge protrusions, migration and invasion potential of HER2+ cancer cells (IC50 ≤ 32 nM). In contrast, other F-actin based processes such as receptor endocytosis were less sensitive to MycB treatment. MycB treatment skewed the size of endocytic vesicles, which may reflect defects in F-actin based vesicle motility or maturation. Given that HER2+ cancers have been effectively targeted by Trastuzumab and Trastuzumab-based ADCs, we tested the effects of a combination of Trastuzumab and MycB on cell migration and invasion. We found that MycB/ Trastuzumab combination treatments inhibited motility of SKOV3 cells to a greater degree than either treatment alone. Altogether, our results provide proof-of-principle that actin toxins such as MycB can be used as a novel class of warheads for ADCs to target and combat highly metastatic cancers.

Does estrogen fluctuation throughout the menstrual cycle impact flow-mediated dilation during exercise in healthy premenopausal women?

The endothelium is the inner most layer of cells that lines all arteries. A primary function of endothelial cells is to regulate responses to increased blood flow and the resulting frictional forces or shear stress by producing factors such as nitric oxide that mediate arterial dilation (flow mediated dilation (FMD)). Menstrual cycle variations in estrogen (E2) have been shown to influence brachial artery (BA) FMD in response to transient increases in shear stress brought about by the release of a brief forearm occlusion (reactive hyperemia (RH)). FMD can also be assessed in response to a sustained shear stress stimulus such as that created with handgrip exercise (HGEX), and studies have shown that RH- and HGEX stimulated FMD provide unique information regarding endothelial function. However, the impact of menstrual phase on HGEX-FMD is unknown. Therefore, the purpose of this study was to determine the impact of cyclical changes in E2 levels on HGEX-FMD over two discrete phases of the menstrual cycle. FMD was assessed via ultrasound. 12 subjects (21 ± 2yrs) completed two experimental visits: (1) low estrogen phase (early follicular) and (2) High estrogen phase (late follicular). In each visit both RH- and HGEX-FMD (6 min handgrip exercise) were assessed. Results are mean ± SD. E2 increased from the low to the high estrogen phase of the menstrual cycle (low: 34 ± 8, high: 161 ± 113pg/mL, p = 0.004). There was no change in mean FMD between phases (RH-FMD: 7.7 ± 4.3% vs. 6.4 ± 3.1%, p = 0.139; HGEX-FMD: 4.8 ± 2.8% vs. 4.8 ± 2.3%, p = 0.979). The observation that both RH- and HGEX-FMD did not differ between phases indicates that menstrual cycle fluctuations in estrogen may not universally impact endothelial function in young, healthy premenopausal women. Further research is needed to improve our understanding of the mechanisms that underlie variability in the impact of menstrual phase on both transient and sustained FMD responses.

PHYSICAL ACTIVITY EXPERIENCES OF PERSIAN WOMEN RECENTLY IMMIGRATED TO CANADA

New immigrants to Canada are generally in similar or better physical and mental health than people born in Canada, however, many studies suggest that their health tends to decline quickly after immigration. Lower physical activity levels among new immigrants might be contributing to this phenomenon. There is a paucity of information regarding the physical activity behaviour of the Canadian immigrant population in general and of West Asian women, such as Iranians (Persians), in particular. Given that this group is characterised by an increasing population growth and lower rates of physical activity, it is critical to understand how best to address physical activity promotion in this population. Purpose: To understand the physical activity experiences of Persian women recently immigrated to Toronto, Canada in order to develop recommendations for the design and implementation of tailored physical activity programs. Methods: A qualitative interpretive description approach was chosen to collect and describe ideas, experiences, and perceptions of physical activity within 10 new immigrant women. Using an inductive approach, two fundamental techniques of immersion and crystallization were used throughout the analysis. Thematic analysis was conducted by performing a sequential process of open and axial coding. Emerged themes were further conceptualized through a socio-ecological lens. Results: The facilitators and barriers to physical activity among the women were situated within five overarching categories, 1) Perceptions about physical activity, 2) New physical environment and social structure, 3) Cultural heritage values, 4) Settlement and immigration factors, and 5) Physical activity program features. Discussion: Findings revealed that Persian new immigrant women’s engagement in physical activity after immigration is influenced by factors across the individual, sociocultural, environmental, institutional, and policy levels. Newcomer women’s physical activity was influenced by their transition from their society of origin to the host society and the challenges and successes experienced throughout the settlement and acculturation process. The most noticeable barrier to physical activity in Canada for the women emerged as the lack of communication of physical activity information to newcomers. A set of recommendations is provided for developing efficient physical activity programs for Persian immigrant women, which may also be relevant for other immigrant groups in Canada.

Radical Ambition: A Portrait of the Toronto New Left, 1958-1985

This thesis examines the rise and decline of the New Left in Toronto from 1958 to 1985. It argues that New Leftism — whose three leading ideals were self-management, national liberation, and community — arose as much from the Old Left as it did from the peace movement. In contrast to earlier readings that interpret the New Left narrowly — essentially, as the combined forces of the white student and peace movements evident mainly on university campuses — this thesis documents the extent to which New Leftism, interpreted as a political formation, provided a framework for a diversity of radical social movements, especially feminism, Black Power, gay liberation, resistance to the capitalist redevelopment of the city, and transnational solidarity. It also questions a declensionist narrative that adopts a “decadal” approach to the radicalism of the sixties, according to which 1970 spelled the end of “60s” radicalism. Quite the contrary, this thesis argues: in Toronto, it would be truer to say that 1970s were “the sixties,” in that only in this later decade did many New Left movements attain their full maturity. New Leftists successfully challenged a host of institutions, sometimes with permanent effects. The educational system was transformed. Cultural institutions and practices were revolutionized. Questions of race and gender, once peripheral to the left, were made central to it. Democratic community institutions became far more powerful. A token of the strength and durability of the New Left in Toronto was the extent to which it remained the bête noir of a series of other radical groups upholding the model of the vanguard communist party — which challenged the New Leftists’ prominence but many members of which often wound up agreeing with their positions. It was only in the early 1980s, with the ascent of a new right, that Toronto’s New Left unmistakably entered a period of decline. Yet, even then, many of its key themes were picked up by fast-growing anarchist and socialist feminist currents. Far from constituting a minor phenomenon, Toronto’s New Left, one of the largest movements for social justice in Canadian history, bequeathed to its progressive successors an imposing legacy of struggle and cultural achievements. It is the purpose of this thesis to evaluate, both critically and sympathetically, the extent to which the New Left attained its radical ambition.

Investigating Multiple Roles of Vocal Confidence in Persuasion

Although persuasion often occurs via oral communication, it remains a comparatively understudied area. This research tested the hypothesis that changes in three properties of voice influence perceptions of speaker confidence, which in turn differentially affects attitudes according to different underlying psychological processes that the Elaboration Likelihood Model (ELM, Petty & Cacioppo, 1984), suggests should emerge under different levels of thought. Experiment 1 was a 2 (Elaboration: high vs. low) x 2 (Vocal speed: increased speed vs. decreased speed) x 2 (Vocal intonation: falling intonation vs. rising intonation) between participants factorial design. Vocal speed and vocal intonation influenced perceptions of speaker confidence as predicted. In line with the ELM, under high elaboration, confidence biased thought favorability, which in turn influenced attitudes. Under low elaboration, confidence did not bias thoughts but rather directly influenced attitudes as a peripheral cue. Experiment 2 used a similar design as Experiment 1 but focused on vocal pitch. Results confirmed pitch influenced perceptions of confidence as predicted. Importantly, we also replicated the bias and cue processes found in Experiment 1. Experiment 3 investigated the process by which a broader spectrum of speech rate influenced persuasion under moderate elaboration. In a 2 (Argument quality: strong vs. weak) x 4 (Vocal speed: extremely slow vs. moderately slow vs. moderately fast vs. extremely fast) between participants factorial design, results confirmed the hypothesized non-linear relationship between speech rate and perceptions of confidence. In line with the ELM, speech rate influenced persuasion based on the amount of processing. Experiment 4 investigated the effects of a broader spectrum of vocal intonation on persuasion under moderate elaboration and used a similar design as Experiment 3. Results indicated a partial success of our vocal intonation manipulation. No evidence was found to support the hypothesized mechanism. These studies show that changes in several different properties of voice can influence the extent to which others perceive them as confident. Importantly, evidence suggests different vocal properties influence persuasion by the same bias and cue processes under high and low thought. Evidence also suggests that under moderate thought, speech rate influences persuasion based on the amount of processing.

Karst hazard analysis towards the development of predictive karst models for southern Ontario

An investigation into karst hazard in southern Ontario has been undertaken with the intention of leading to the development of predictive karst models for this region. The reason these are not currently feasible is a lack of sufficient karst data, though this is not entirely due to the lack of karst features. Geophysical data was collected at Lake on the Mountain, Ontario as part of this karst investigation. This data was collected in order to validate the long-standing hypothesis that Lake on the Mountain was formed from a sinkhole collapse. Sub-bottom acoustic profiling data was collected in order to image the lake bottom sediments and bedrock. Vertical bedrock features interpreted as solutionally enlarged fractures were taken as evidence for karst processes on the lake bottom. Additionally, the bedrock topography shows a narrower and more elongated basin than was previously identified, and this also lies parallel to a mapped fault system in the area. This suggests that Lake on the Mountain was formed over a fault zone which also supports the sinkhole hypothesis as it would provide groundwater pathways for karst dissolution to occur. Previous sediment cores suggest that Lake on the Mountain would have formed at some point during the Wisconsinan glaciation with glacial meltwater and glacial loading as potential contributing factors to sinkhole development. A probabilistic karst model for the state of Kentucky, USA, has been generated using the Weights of Evidence method. This model is presented as an example of the predictive capabilities of these kind of data-driven modelling techniques and to show how such models could be applied to karst in Ontario. The model was able to classify 70% of the validation dataset correctly while minimizing false positive identifications. This is moderately successful and could stand to be improved. Finally, suggestions to improving the current karst model of southern Ontario are suggested with the goal of increasing investigation into karst in Ontario and streamlining the reporting system for sinkholes, caves, and other karst features so as to improve the current Ontario karst database.

SENSORIMOTOR WORKING MEMORY CAPACITY LIMITS

Two novel studies examining the capacity and characteristics of working memory for object weights, experienced through lifting, were completed. Both studies employed visually identical objects of varying weight and focused on memories linking object locations and weights. Whereas numerous studies have examined the capacity of visual working memory, the capacity of sensorimotor memory involved in motor control and object manipulation has not yet been explored. In addition to assessing working memory for object weights using an explicit perceptual test, we also assessed memory for weight using an implicit measure based on motor performance. The vertical lifting or LF and the horizontal GF applied during lifts, measured from force sensors embedded in the object handles, were used to assess participants’ ability to predict object weights. In Experiment 1, participants were presented with sets of 3, 4, 5, 7 or 9 objects. They lifted each object in the set and then repeated this procedure 10 times with the objects lifted either in a fixed or random order. Sensorimotor memory was examined by assessing, as a function of object set size, how lifting forces changed across successive lifts of a given object. The results indicated that force scaling for weight improved across the repetitions of lifts, and was better for smaller set sizes when compared to the larger set sizes, with the latter effect being clearest when objects were lifting in a random order. However, in general the observed force scaling was poorly scaled. In Experiment 2, working memory was examined in two ways: by determining participants’ ability to detect a change in the weight of one of 3 to 6 objects lifted twice, and by simultaneously measuring the fingertip forces applied when lifting the objects. The results showed that, even when presented with 6 objects, participants were extremely accurate in explicitly detecting which object changed weight. In addition, force scaling for object weight, which was generally quite weak, was similar across set sizes. Thus, a capacity limit less than 6 was not found for either the explicit or implicit measures collected.

Towards Mapping of Rock Walls Using a UAV-Mounted 2D Laser Scanner in GPS Denied Environments

In geotechnical engineering, the stability of rock excavations and walls is estimated by using tools that include a map of the orientations of exposed rock faces. However, measuring these orientations by using conventional methods can be time consuming, sometimes dangerous, and is limited to regions of the exposed rock that are reachable by a human. This thesis introduces a 2D, simulated, quadcopter-based rock wall mapping algorithm for GPS denied environments such as underground mines or near high walls on surface. The proposed algorithm employs techniques from the field of robotics known as simultaneous localization and mapping (SLAM) and is a step towards 3D rock wall mapping. Not only are quadcopters agile, but they can hover. This is very useful for confined spaces such as underground or near rock walls. The quadcopter requires sensors to enable self localization and mapping in dark, confined and GPS denied environments. However, these sensors are limited by the quadcopter payload and power restrictions. Because of these restrictions, a light weight 2D laser scanner is proposed. As a first step towards a 3D mapping algorithm, this thesis proposes a simplified scenario in which a simulated 1D laser range finder and 2D IMU are mounted on a quadcopter that is moving on a plane. Because the 1D laser does not provide enough information to map the 2D world from a single measurement, many measurements are combined over the trajectory of the quadcopter. Least Squares Optimization (LSO) is used to optimize the estimated trajectory and rock face for all data collected over the length of a light. Simulation results show that the mapping algorithm developed is a good first step. It shows that by combining measurements over a trajectory, the scanned rock face can be estimated using a lower-dimensional range sensor. A swathing manoeuvre is introduced as a way to promote loop closures within a short time period, thus reducing accumulated error. Some suggestions on how to improve the algorithm are also provided.

The application of PCA as a movement pattern recognition technique: A proof of principle

Quantitative methods can help us understand how underlying attributes contribute to movement patterns. Applying principal components analysis (PCA) to whole-body motion data may provide an objective data-driven method to identify unique and statistically important movement patterns. Therefore, the primary purpose of this study was to determine if athletes’ movement patterns can be differentiated based on skill level or sport played using PCA. Motion capture data from 542 athletes performing three sport-screening movements (i.e. bird-dog, drop jump, T-balance) were analyzed. A PCA-based pattern recognition technique was used to analyze the data. Prior to analyzing the effects of skill level or sport on movement patterns, methodological considerations related to motion analysis reference coordinate system were assessed. All analyses were addressed as case-studies. For the first case study, referencing motion data to a global (lab-based) coordinate system compared to a local (segment-based) coordinate system affected the ability to interpret important movement features. Furthermore, for the second case study, where the interpretability of PCs was assessed when data were referenced to a stationary versus a moving segment-based coordinate system, PCs were more interpretable when data were referenced to a stationary coordinate system for both the bird-dog and T-balance task. As a result of the findings from case study 1 and 2, only stationary segment-based coordinate systems were used in cases 3 and 4. During the bird-dog task, elite athletes had significantly lower scores compared to recreational athletes for principal component (PC) 1. For the T-balance movement, elite athletes had significantly lower scores compared to recreational athletes for PC 2. In both analyses the lower scores in elite athletes represented a greater range of motion. Finally, case study 4 reported differences in athletes’ movement patterns who competed in different sports, and significant differences in technique were detected during the bird-dog task. Through these case studies, this thesis highlights the feasibility of applying PCA as a movement pattern recognition technique in athletes. Future research can build on this proof-of-principle work to develop robust quantitative methods to help us better understand how underlying attributes (e.g. height, sex, ability, injury history, training type) contribute to performance.

Provenance of Holocene Calcareous Aeolianites, Eastern South Australia

The southeastern coast of South Australia contains a spectacular and world-renown suite of Quaternary calcareous aeolianites. This study is focused on the provenance of components in the Holocene sector of this carbonate breach-dune succession. Research was carried out along seven transects from ~30 meters water depth offshore across the beach and into the dunes. Offshore sediments were acquired via grab sampling and SCUBA. Results indicate that dunes of the southern Lacepede and Otway coasts in particular are mostly composed of modern invertebrate and calcareous algal allochems. The most numerous grains are from molluscs, benthic foraminifera, coralline algae, echinoids, and bryozoans. These particles originate in carbonate factories such as macroalgal forests, rocky reefs, seagrass meadows, and low-relief seafloor rockgrounds. The incorporation of carbonate skeletons into coastal dunes, however, depends on a combination of; 1) the infauna within intertidal and nearshore environments, 2) the physical characteristics of different allochems and their ability to withstand fragmentation and abrasion, 3) the wave and swell climate, and 4) the nature of aeolian transport. Most aeolian dune sediment is derived from nearshore and intertidal carbonate factories. This is particularly well illustrated by the abundance of robust infaunal bivalves that inhabit the nearshore sands and virtual absence of bryozoans that are common as sediment particles in water depths > 10mwd. Thus, the calcareous aeolianites in this cool-water carbonate region are not a reflection of the offshore marine shelf factories, but more a product of shallow nearshore-intertidal biomes.