Discrimination of geomorphic surfaces with multivariate analysis of soil attributes in sandstone - basalt lithosequence

O conceito de superfície geomórfica permite uma interligação entre os diferentes ramos da ciência do solo, tais como geologia, geomorfologia e pedologia. Esta associação favorece a compreensão da distribuição espacial dos solos na paisagem, e torna possível compreender o comportamento dos atributos do solo, que estão principalmente relacionadas com a estratigrafia e formas do relevo. Assim, este estudo visa à aplicação da estatística multivariada para categorizar superfícies geomórficas em uma litossequência arenito-basalto, de modo a fornecer uma base para a avaliação do solo em áreas afins. A área de estudo está localizada no município de Pereira Barreto, São Paulo, Brasil. A área escolhida possui 530 hectares, onde foram localizadas e mapeadas três superfícies geomórficas (I, II e III). Na área, 134 amostras foram coletadas nas profundidades de 0,0-0,2 m e 0,8-1,0 m, foram determinados os conteúdos de areia, silte e argila, pH em CaCl2, conteúdo de MO, P, Ca, Mg, K, Al e H+Al. Com base nos resultados, foram realizadas a análise univariada e multivariada de variância, clusters e principal componente, a fim de comparar as três superfícies geomórficas. A análise estatística univariada dos atributos do solo não foi eficiente na identificação das três superfícies geomórficas. Utilizando-se os atributos físicos e químicos do solo, as técnicas estatísticas multivariada permitiram à separação dos três grupos de corpos naturais do solo que foram equivalentes as três superfícies geomórficas mapeadas. Estes resultados são interessantes, pois demonstram a viabilidade da utilização de classificação numérica das superfícies geomórficas para ajudar no mapeamento de solo.

Determinação de Chaveamento para Recomposição do Serviço em Redes de Distribuição de Energia Elétrica em Média Tensão Através de Métodos Baseado em Parâmetros de Sensibilidade

The reconfiguration of a distribution network is a change in its topology, aiming to provide specific operation conditions of the network, by changing the status of its switches. It can be performed regardless of any system anomaly. The service restoration is a particular case of reconfiguration and should be performed whenever there is a network failure or whenever one or more sections of a feeder have been taken out of service for maintenance. In such cases, loads that are supplied through lines sections that are downstream of portions removed for maintenance may be supplied by the closing of switches to the others feeders. By classical methods of reconfiguration, several switches may be required beyond those used to perform the restoration service. This includes switching feeders in the same substation or for substations that do not have any direct connection to the faulted feeder. These operations can cause discomfort, losses and dissatisfaction among consumers, as well as a negative reputation for the energy company. The purpose of this thesis is to develop a heuristic for reconfiguration of a distribution network, upon the occurrence of a failure in this network, making the switching only for feeders directly involved in this specific failed segment, considering that the switching applied is related exclusively to the isolation of failed sections and bars, as well as to supply electricity to the islands generated by the condition, with significant reduction in the number of applications of load flows, due to the use of sensitivity parameters for determining voltages and currents estimated on bars and lines of the feeders directly involved with that failed segment. A comparison between this process and classical methods is performed for different test networks from the literature about networks reconfiguration

Aplicação de sistemas multi-classificadores no diagnóstico de falhas em motores de indução trifásicos

Equipment maintenance is the major cost factor in industrial plants, it is very important the development of fault predict techniques. Three-phase induction motors are key electrical equipments used in industrial applications mainly because presents low cost and large robustness, however, it isn t protected from other fault types such as shorted winding and broken bars. Several acquisition ways, processing and signal analysis are applied to improve its diagnosis. More efficient techniques use current sensors and its signature analysis. In this dissertation, starting of these sensors, it is to make signal analysis through Park s vector that provides a good visualization capability. Faults data acquisition is an arduous task; in this way, it is developed a methodology for data base construction. Park s transformer is applied into stationary reference for machine modeling of the machine s differential equations solution. Faults detection needs a detailed analysis of variables and its influences that becomes the diagnosis more complex. The tasks of pattern recognition allow that systems are automatically generated, based in patterns and data concepts, in the majority cases undetectable for specialists, helping decision tasks. Classifiers algorithms with diverse learning paradigms: k-Neighborhood, Neural Networks, Decision Trees and Naïves Bayes are used to patterns recognition of machines faults. Multi-classifier systems are used to improve classification errors. It inspected the algorithms homogeneous: Bagging and Boosting and heterogeneous: Vote, Stacking and Stacking C. Results present the effectiveness of constructed model to faults modeling, such as the possibility of using multi-classifiers algorithm on faults classification

Estudos de algumas ferramentas de coleta e visualização de dados e desempenho de aplicações paralelas no ambiente MPI

The last years have presented an increase in the acceptance and adoption of the parallel processing, as much for scientific computation of high performance as for applications of general intention. This acceptance has been favored mainly for the development of environments with massive parallel processing (MPP - Massively Parallel Processing) and of the distributed computation. A common point between distributed systems and MPPs architectures is the notion of message exchange, that allows the communication between processes. An environment of message exchange consists basically of a communication library that, acting as an extension of the programming languages that allow to the elaboration of applications parallel, such as C, C++ and Fortran. In the development of applications parallel, a basic aspect is on to the analysis of performance of the same ones. Several can be the metric ones used in this analysis: time of execution, efficiency in the use of the processing elements, scalability of the application with respect to the increase in the number of processors or to the increase of the instance of the treat problem. The establishment of models or mechanisms that allow this analysis can be a task sufficiently complicated considering parameters and involved degrees of freedom in the implementation of the parallel application. An joined alternative has been the use of collection tools and visualization of performance data, that allow the user to identify to points of strangulation and sources of inefficiency in an application. For an efficient visualization one becomes necessary to identify and to collect given relative to the execution of the application, stage this called instrumentation. In this work it is presented, initially, a study of the main techniques used in the collection of the performance data, and after that a detailed analysis of the main available tools is made that can be used in architectures parallel of the type to cluster Beowulf with Linux on X86 platform being used libraries of communication based in applications MPI - Message Passing Interface, such as LAM and MPICH. This analysis is validated on applications parallel bars that deal with the problems of the training of neural nets of the type perceptrons using retro-propagation. The gotten conclusions show to the potentiality and easinesses of the analyzed tools.

Desenvolvimento de uma desfribadeira para obtenção da fibra da folha do abacaxi

In 1998 the first decorticator was developed in the Textile Engineering Laboratory and patented for the purpose of extracting fibres from pineapple leaves, with the financial help from CNPq and BNB. The objective of the present work was to develop an automatic decorticator different from the first one with a semiautomatic system of decortication with automatic feeding of the leaves and collection of the extracted fibres. The system is started through a command system that passes information to two engines, one for starting the beater cylinder and the other for the feeding of the leaves as well as the extraction of the decorticated fibres automatically. This in turn introduces the leaves between a knife and a beater cylinder with twenty blades (the previous one had only 8 blades). These blades are supported by equidistant flanges with a central transmission axis that would help in increasing the number of beatings of the leaves. In the present system the operator has to place the leaves on the rotating endless feeding belt and collect the extracted leaves that are being carried out through another endless belt. The pulp resulted form the extraction is collected in a tray through a collector. The feeding of the leaves as well as the extraction of the fibres is controlled automatically by varying the velocity of the cylinders. The semi-automatic decorticator basically composed of a chassis made out of iron bars (profile L) with 200cm length, 91 cm of height 68 cm of width. The decorticator weighs around 300Kg. It was observed that the increase in the number of blades from 8 to twenty in the beater cylinder reduced the turbulence inside the decorticator, which helped to improve the removal of the fibres without any problems as well as the quality of the fibres. From the studies carried out, from each leaf 2,8 to 4,5% of fibres can be extracted. This gives around 4 to 5 tons of fibres per hectare, which is more than that of cotton production per hectare. This quantity with no doubt could generate jobs to the people not only on the production of the fibres but also on their application in different areas

Sensibilidade a herbicidas de acessos de aguapé coletados em reservatórios do Estado de São Paulo

Com o objetivo de avaliar o efeito de herbicidas em diferentes acessos de aguapé coletados em reservatórios de hidrelétricas do Estado de São Paulo, foi realizado um estudo no Núcleo de Pesquisas Avançadas em Matologia da FCA-UNESP, campus de Botucatu. A escolha das plantas geneticamente diferentes foi feita com base em estudos de variabilidade genética, nos quais se utilizou a técnica de RAPD. Avaliou-se o efeito dos herbicidas imazapyr nas doses de 62,5 e 125,0 g e.a. ha-1, glyphosate a 1.680 e 3.360 g e.a. ha-1 + 0,5% V/V de Extravon, diquat a 480 e 960 g i.a. ha-1 e 2,4-D a 670 e 1.340 g e.a. ha-1. Os seis acessos escolhidos foram colocados em caixas plásticas de 28,0 x 14,0 x 12,0 cm, contendo 4 litros de água. A aplicação dos produtos foi realizada com um simulador de pulverização pressurizado com ar comprimido, equipado com barra de aplicação com quatro bicos de jato plano Teejet 110.02 VS. A pressão constante de trabalho foi de 1,6 bar, e o consumo de calda, de 193 L ha-1. A velocidade de aplicação foi de 3,69 km h-1. Durante as aplicações, a temperatura do ar foi de 25 ºC e a umidade relativa de 73%. Foram realizadas avaliações visuais de controle aos 3, 5, 7, 11, 21 e 28 dias, nas quais 0 consistiu em nenhum controle e 100 em morte de plantas. Todos os herbicidas e doses testados proporcionaram controle eficiente das plantas de aguapé, e os seis acessos estudados responderam de forma semelhante.

Controle químico de Panicum repens e Paspalum repens

Panicum repens e Paspalum repens são espécies infestantes de ambientes úmidos e alagados, freqüentes em margens de lagos, reservatórios, canais de irrigação e drenagem. O presente trabalho teve como objetivo avaliar a eficiência de diferentes herbicidas no controle dessas duas espécies. O experimento foi conduzido no Núcleo de Pesquisas Avançadas em Matologia, do Departamento de Produção Vegetal, pertencente à Faculdade de Ciências Agronômicas/UNESP, campus de Botucatu-SP. As plantas foram cultivadas em caixas d'água e as pulverizações foram realizadas utilizando-se um pulverizador costal pressurizado a CO2. Os tratamentos testados foram: glyphosate a 2.400, 3.360 e 4.320 g e.a. ha-1 + Aterbane 0,5% v/v, glyphosate a 2.400, 3.360 e 4.320 g e.a. ha-1 + Silwet 0.1% v/v, imazapyr a 750 e 1.500 g e.a. ha-1 e diquat a 400 e 800 g i.a. ha-1 (em aplicações seqüenciais de 200+200 g i.a. ha-1 e 400+400 g i.a. ha-1), além de uma testemunha sem aplicação de herbicidas. O delineamento experimental utilizado foi inteiramente casualizado, com quatro repetições. Avaliações visuais de controle foram realizadas, sendo a massa seca das plantas determinada ao final do estudo. O herbicida glyphosate na dose de 4.320 g e.a. ha-1, independentemente do adjuvante utilizado, assim como na dose de 3.360 g e.a. ha-1 com Aterbane, proporcionou bom controle de Panicum repens e, em todas as doses e adjuvantes testados, promoveu controle excelente de Paspalum repens. O herbicida imazapyr, independentemente da dose testada, apresentou resultados insatisfatórios no controle das plantas de Panicum repens, porém promoveu um excelente controle de Paspalum repens; o herbicida diquat, apesar das duas aplicações e independentemente da dose utilizada, mostrou-se ineficiente para controle das duas espécies.

Efeito de diferentes concentrações de aterbane na deposição de calda em plantas de Pistia stratiotes

O objetivo deste trabalho foi avaliar o efeito do adjuvante Aterbane na deposição de calda de pulverização, aplicada sobre plantas de Pistia stratiotes. Os tratamentos foram constituídos por três concentrações do adjuvante Aterbane (0, 0,25 e 0,5%), usado na elaboração da calda de pulverização. As caldas foram preparadas utilizando-se o corante FDC-1 a 1.500 ppm como traçante. O delineamento experimental adotado foi o inteiramente casualizado com 30 repetições, sendo cada repetição constituída por uma planta com seis folhas. A aplicação foi feita com um pulverizador estacionário, à pressão constante de 2 bars, com consumo de calda de 200 L ha-1. Foram utilizadas pontas de jato plano Teejet 11002vs. Os resultados demonstraram que, quantitativamente, o Aterbane não promoveu nenhum efeito na deposição da calda, entretanto, qualitativamente, quanto maior a concentração utilizada maior foi a uniformidade de deposição de calda.

Estudo da funcionalidade de espécies comestíveis do semiárido nordestino e estratégias para sua utilização como ingredientes para fins alimentícios

The Brazilian caatinga is characterized by low annual rainfall and arid soils. Several cactaceae, either native or adapted species, grow in this semi-arid region, including the prickly pear (Opuntia fícus indica) and facheiro ((Philosocereus pachycladus Ritter) which produce underexploited edible fruits. In addition to these species, the algaroba is a leguminous with little studied technological applications and bioactive potential so far. Therefore, this research aims to investigate the physicochemical, bioactive and functional attributes of the prickly pear and facheiro fruit pulps and the algaroba flour. Specifically, this study approaches the physicochemical characterization, total phenolic compounds (TPC) and the betalain identification and quantification by HPLC-DAD-ESI-MS. It is also investigated the DPPH antioxidant capacity and the antienzymatic activities against alpha-amylase and alphaglucosidase of water and ethanolic extracts of these food material. In order to address their potential to be used as food ingredients, juice blends prepared with mixtures of cajá and prickly pear, biofilms with facheiro and cereal bars with algaroba flour were elaborated and analyzed. The prickly pear fruits presented low acidity and high sugar content when compared to facheiro. The Philosocereus pachycladus Ritter fruits had higher protein and ash content, but the algaroba flour was the species with higher protein and sugar content among all. The algaroba flour also presented outstanding food fiber content, which reveals its potentiality to be used as a natural intestinal regulator. The TPC of water and ethanol extracts ranged from 3.87 to 16.21 mg GAE/100g for algaroba flour, 79.24 to 110.20 GAE/ 100g for prickly pear and 412.23 to 539.14 mg GAE/100g for facheiro. The 70% (w/v) ethanol extract reached the highest DPPH antioxidant activity, which was linearly correlated to its high TPC content. In regard to the enzymatic inhibitory activities, the best performance was observed for the prickly pear extracts which presented a moderate inhibition for both investigated enzymes, but interestingly, no alpha-glucosidase inhibition was observed for facheiro extracts. This work shows, for the first time in the literature, the functional attributes of facheiro fruits, as well as the presence of betacianins and isobetanin in the pulp of this exotic fruit. When it comes to the food products developed here, the sensory attributes that better described the juice blend cajá-prickly pear were sweetness, acidity, color yellow-orange, body, turbidity and cajá flavor. The discriminative test applied for cereal bars produced with and without algaroba revealed that the texture was the only sensory attribute that differed (p<0.05) between these two samples. It was also observed that the addition of facheiro extracts did not influence the visual characteristics of the biofilms. Overall, this work unveils the physicochemical and bioactive attributes of these commercial and technologically underexploited species widely found in the Brazilian caatinga and presents alternatives for their rational use

Diagnóstco geoambiental e avaliação de uso e ocupação do campo de dunas da zona especial de interesse turístco II (ZET-II) Natal/RN

The accelerated pressure of use and occupation of Rio Grande do Norte coastline in the last two decades presented the tourism as its main vector, having as a consequence a strong, articulated and growing real estate speculation of this area. In the Natal County there is a Zona Especial de Interesse Turistico II (Special Zone of Tourism Interest II) (ZET-II), consisted of urban beaches with approximately 8.5 km that is an important seashore of the city. The purpose of this research was identification, characterization and assessment of the process of use and occupation of dunes fields emphasizing the role of ZET-II, whereas the specific goals was the analysis of weather, geology and geomorphology, characterization of use and occupation of soil, and elaboration of an environmental diagnosis with identification and description of its mains consequences. The result of this work was the delineation of geologic-geomorphological map of the area with identification of principals units, determining its use and occupation, the measurement of the area already occupied by equipments, besides the description of the environmental impacts on dune fields: devastation, coastline erosion, ocean pollution by sewer and pluvial waters, contamination of groundwater, distribution inadequate of solid residues, landscape degradation, and occupation of seashore through the privatization of public areas. Concluding that the degrading changes occurred in this areas are resulting from the nature of use and urban seashore regulations, which have been diminishing the natural aspect, altering the landscape definitely, compromising the quality of hydro resources and altering its use, privatizing the areas between tides, complicating the population access and obstructing the scenery visualization of dunes and ocean. There is an urgent necessity of improvement of public politics in order to improve the strategies and organization of use and occupation of space urban-coastline

Análise da bacia hidrográfica do Rio Punaú-Rio Grande do Norte utilizando ferramentas de geoprocessamento

Provide data and information on watershed becomes important since the knowledge of their physical characteristics, land use, etcetera, allows for better planning and sustainable use of economically, socially and environmentally in this area. The investigation of the physical environment has been commonly given with the use of geoprocessing, which has proved a very efficient tool. Within this context, this research aims at analyzing the river basin Punaú (located in the cities of Touros, Rio do Fogo and Pureza, state of Rio Grande do Norte) in several aspects, using geoprocessing as a tool of work, to provide information about the entire watershed. Specifically, this study aimed to update pre-existing maps, such as geological, geomorphological and land use, generating map of environmental vulnerability, under the aspect of erosion susceptibility of the area, generating map of legal incompatibility, identifying areas that are already being employed in breach of environmental legislation; propose solutions to the occupation of the river basin Punaú, focused on environmental planning. The methodology was based on the use of geoprocessing tools for data analysis and to make maps of legal incompatibility and environmental vulnerability. For the first map was taken into account the environmental legislation regarding the protection of watersheds. For the vulnerability analysis, the generated map was the result of crossing the maps of geology, geomorphology, soils and land use, having been assigned weights to different attributes of thematic maps, generating a map of environmental vulnerability in relation to susceptibility to erosion. The analysis results indicate that agriculture is the most significant activity in the basin, in total occupied area, which confers a high degree of environmental vulnerability in most of the basin, and some agricultural areas eventually develop in a manner inconsistent with Brazilian environmental legislation. It is proposed to consider deploying a measure of revitalization of the watershed in more critical areas and conservation through mitigation measures on the causes of environmental degradation, such as protection of water sources, protection and restoration of riparian vegetation, protection of permanent preservation areas, containment of erosion processes in general, and others listed or not in specific laws, and even the establishment of a committee of basins in the area

Propagação de danos no modelo de ising em redes de bravais e em fractais

In this work we have studied, by Monte Carlo computer simulation, several properties that characterize the damage spreading in the Ising model, defined in Bravais lattices (the square and the triangular lattices) and in the Sierpinski Gasket. First, we investigated the antiferromagnetic model in the triangular lattice with uniform magnetic field, by Glauber dynamics; The chaotic-frozen critical frontier that we obtained coincides , within error bars, with the paramegnetic-ferromagnetic frontier of the static transition. Using heat-bath dynamics, we have studied the ferromagnetic model in the Sierpinski Gasket: We have shown that there are two times that characterize the relaxation of the damage: One of them satisfy the generalized scaling theory proposed by Henley (critical exponent z~A/T for low temperatures). On the other hand, the other time does not obey any of the known scaling theories. Finally, we have used methods of time series analysis to study in Glauber dynamics, the damage in the ferromagnetic Ising model on a square lattice. We have obtained a Hurst exponent with value 0.5 in high temperatures and that grows to 1, close to the temperature TD, that separates the chaotic and the frozen phases

Cantos de bar: sociabilidades e boemia na cidade de Natal

The academic work Bar Corners: sociability and bohemia in the Natal City (1946-1960) has as objective the study of a representation of the literary bohemia in Natal in the second half of the 1940 s and 50 s, by means of analyses of the memory books and the chronicles of the newspapers A Ordem and A República. In order to have a better understanding concerning the subject, in the first chapter we try to show the transformations which have occurred in Natal and, consequently, within Natal sociability during the first half of the twentieth century. The bohemia, demonstrated in this dissertation as a way of sociability, expressed itself through the meetings in bars and the serenades. In the second chapter, the study conducted a mapping of the bohemian spaces (cafes, candy stores, bars and prostituition houses) and established the differences between these spaces. We ideated the spaces as the stage of interpersonal relations, as people went to these places in the attempt to participate of the conversation groups that were found there, choosing them according to their affinity and personal interests. The last chapter has the purpose of investigating the bohemia in Natal through the experience of the chronicler Newton Navarro, who used to roam the dark streets of Ribeira in search for open bars, extending bohemia until dawn. The intellectual activity was associated with his bohemian practices. As he frequented the marginal areas in Natal, Navarro wrote about them in the major newspapers of the city

The influence of visual inter-hemispheric connections on spiking, assembly and LFP activities, and their phase relationship during figure-ground stimulation

Desde os descobrimentos pioneiros de Hubel e Wiesel acumulou-se uma vasta literatura descrevendo as respostas neuronais do córtex visual primário (V1) a diferentes estímulos visuais. Estes estímulos consistem principalmente em barras em movimento, pontos ou grades, que são úteis para explorar as respostas dentro do campo receptivo clássico (CRF do inglês classical receptive field) a características básicas dos estímulos visuais como a orientação, direção de movimento, contraste, entre outras. Entretanto, nas últimas duas décadas, tornou-se cada vez mais evidente que a atividade de neurônios em V1 pode ser modulada por estímulos fora do CRF. Desta forma, áreas visuais primárias poderiam estar envolvidas em funções visuais mais complexas como, por exemplo, a separação de um objeto ou figura do seu fundo (segregação figura-fundo) e assume-se que as conexões intrínsecas de longo alcance em V1, assim como as conexões de áreas visuais superiores, estão ativamente envolvidas neste processo. Sua possível função foi inferida a partir da análise das variações das respostas induzidas por um estímulo localizado fora do CRF de neurônios individuais. Mesmo sendo muito provável que estas conexões tenham também um impacto tanto na atividade conjunta de neurônios envolvidos no processamento da figura quanto no potencial de campo, estas questões permanecem pouco estudadas. Visando examinar a modulação do contexto visual nessas atividades, coletamos potenciais de ação e potenciais de campo em paralelo de até 48 eletrodos implantados na área visual primária de gatos anestesiados. Estimulamos com grades compostas e cenas naturais, focando-nos na atividade de neurônios cujo CRF estava situado na figura. Da mesma forma, visando examinar a influência das conexões laterais, o sinal proveniente da área visual isotópica e contralateral foi removido através da desativação reversível por resfriamento. Fizemos isso devido a: i) as conexões laterais intrínsecas não podem ser facilmente manipuladas sem afetar diretamente os sinais que estão sendo medidos, ii) as conexões inter-hemisféricas compartilham as principais características anatômicas com a rede lateral intrínseca e podem ser vistas como uma continuação funcional das mesmas entre os dois hemisférios e iii) o resfriamento desativa as conexões de forma causal e reversível, silenciando temporariamente seu sinal, permitindo conclusões diretas a respeito da sua contribuição. Nossos resultados demonstram que o mecanismo de segmentação figurafundo se reflete nas taxas de disparo de neurônios individuais, assim como na potência do potencial de campo e na relação entre sua fase e os padrões de disparo produzidos pela população. Além disso, as conexões laterais inter-hemisféricas modulam estas variáveis dependendo da estimulação feita fora do CRF. Observamos também uma influência deste circuito lateral na coerência entre potenciais de campo entre eletrodos distantes. Em conclusão, nossos resultados dão suporte à ideia de um mecanismo complexo de segmentação figura-fundo atuando desde as áreas visuais primárias em diferentes escalas de frequência. Esse mecanismo parece envolver grupos de neurônios ativos sincronicamente e dependentes da fase do potencial de campo. Nossos resultados também são compatíveis com a hipótese que conexões laterais de longo alcance também fazem parte deste mecanismo

Modeling of interfaces in two-dimensional problems using solid finite elements with high aspect ratio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)