A perceção do dador de sangue face à dádiva de sangue e ao estatuto do dador de sangue

Mestrado em Gestão e Avaliação de Tecnologias da Saúde

Optimising protocol of acquisition and post-processing procedures in the assessment of coronary artery disease by computed tomography

Coronary artery disease (CAD) is currently one of the most prevalent diseases in the world population and calcium deposits in coronary arteries are one direct risk factor. These can be assessed by the calcium score (CS) application, available via a computed tomography (CT) scan, which gives an accurate indication of the development of the disease. However, the ionising radiation applied to patients is high. This study aimed to optimise the protocol acquisition in order to reduce the radiation dose and explain the flow of procedures to quantify CAD. The main differences in the clinical results, when automated or semiautomated post-processing is used, will be shown, and the epidemiology, imaging, risk factors and prognosis of the disease described. The software steps and the values that allow the risk of developingCADto be predicted will be presented. A64-row multidetector CT scan with dual source and two phantoms (pig hearts) were used to demonstrate the advantages and disadvantages of the Agatston method. The tube energy was balanced. Two measurements were obtained in each of the three experimental protocols (64, 128, 256 mAs). Considerable changes appeared between the values of CS relating to the protocol variation. The predefined standard protocol provided the lowest dose of radiation (0.43 mGy). This study found that the variation in the radiation dose between protocols, taking into consideration the dose control systems attached to the CT equipment and image quality, was not sufficient to justify changing the default protocol provided by the manufacturer.

Retratos de uma musa do século XXI: a figura feminina na GQ Portugal

Relatório de estágio apresentado à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Jornalismo.

Assessing usual dietary intake in complex sample design surveys: the National Dietary Survey

The National Cancer Institute (NCI) method allows the distributions of usual intake of nutrients and foods to be estimated. This method can be used in complex surveys. However, the user must perform additional calculations, such as balanced repeated replication (BRR), in order to obtain standard errors and confidence intervals for the percentiles and mean from the distribution of usual intake. The objective is to highlight adaptations of the NCI method using data from the National Dietary Survey. The application of the NCI method was exemplified analyzing the total energy (kcal) and fruit (g) intake, comparing estimations of mean and standard deviation that were based on the complex design of the Brazilian survey with those assuming simple random sample. Although means point estimates were similar, estimates of standard error using the complex design increased by up to 60% compared to simple random sample. Thus, for valid estimates of food and energy intake for the population, all of the sampling characteristics of the surveys should be taken into account because when these characteristics are neglected, statistical analysis may produce underestimated standard errors that would compromise the results and the conclusions of the survey.

An integrated approach for TQM implementation in SMEs

This paper tackles the broad issue of TQM implementation in SMEs. It includes a review of two models aimed at improving organisational performance, the EFQM Excellence Model and the Balanced Scorecard, which have been widely used in large organisations. Both models are examined as to their suitability and applicability to small and medium sized enterprises. The findings indicate that SMEs can benefit from the adoption of an integrated approach that combines both models if some critical factors are considered in the implementation process. A theoretical framework is proposed, which considers such integration and leads to a gradual implementation of TQM principles and methods in SMEs.

ROM-less RNS-to-binary converter moduli {22N − 1, 22N + 1, 2N − 3, 2N + 3}

In this paper, a novel ROM-less RNS-to-binary converter is proposed, using a new balanced moduli set {22n-1, 22n + 1, 2n-3, 2n + 3} for n even. The proposed converter is implemented with a two stage ROM-less approach, which computes the value of X based only in arithmetic operations, without using lookup tables. Experimental results for 24 to 120 bits of Dynamic Range, show that the proposed converter structure allows a balanced system with 20% faster arithmetic channels regarding the related state of the art, while requiring similar area resources. This improvement in the channel's performance is enough to offset the higher conversion costs of the proposed converter. Furthermore, up to 20% better Power-Delay-Product efficiency metric can be achieved for the full RNS architecture using the proposed moduli set. © 2014 IEEE.

Multilevel high-voltage pulse generation based on a new modular solid-state switch

This paper describes a modular solid-state switching cell derived from the Marx generator concept to be used in topologies for generating multilevel unipolar and bipolar high-voltage (HV) pulses into resistive loads. The switching modular cell comprises two ON/OFF semiconductors, a diode, and a capacitor. This cell can be stacked, being the capacitors charged in series and their voltages balanced in parallel. To balance each capacitor voltage without needing any parameter measurement, a vector decision diode algorithm is used in each cell to drive the two switches. Simulation and experimental results, for generating multilevel unipolar and bipolar HV pulses into resistive loads are presented.

Diabetes burden in Brazil: fraction attributable to overweight, obesity, and excess weight

OBJECTIVE To estimate the burden of type 2 diabetes mellitus and its percentage attributable to overweight and obesity in Brazil.METHODS The burden of diabetes mellitus was described in terms of disability-adjusted life years, which is the sum of two components: years of life lost and years lived with disability. To calculate the fraction of diabetes mellitus attributable to overweight, obesity, and excess weight, we used the prevalence of these risk factors according to sex and age groups (> 20 years) obtained from the 2008 Pesquisa Dimensões Sociais das Desigualdades (Social Dimensions of Inequality Survey) and the relative risks derived from the international literature.RESULTS Diabetes mellitus accounted for 5.4% of Brazilian disability-adjusted life years in 2008, with the largest fraction attributed to the morbidity component (years lived with disability). Women exhibited higher values for disability-adjusted life years. In Brazil, 49.2%, 58.3%, and 70.6% of diabetes mellitus in women was attributable to overweight, obesity, and excess weight, respectively. Among men, these percentages were 40.5%, 45.4%, and 60.3%, respectively. Differences were observed with respect to Brazilian regions and age groups.CONCLUSIONS A large fraction of diabetes mellitus was attributable to preventable individual risk factors and, in about six years, the contribution of these factors significant increased, particularly among men. Policies aimed at promoting healthy lifestyle habits, such as a balanced diet and physical activity, can have a significant impact on reducing the burden of diabetes mellitus in Brazil.

A sustentabilidade e o ciclo de vida dos edifícios

A crescente preocupação que envolve as questões ambientais a nível mundial, cada vez mais agravadas pelo comportamento irresponsável do Homem, conduziu à criação de métodos de avaliação dos impactes ambientais provocados por produtos e sistemas. Sendo o sector da construção responsável por grande parte desses impactes, é evidente a necessidade de aplicação de medidas que visem mitigar ou, no mínimo, reduzir até valores aceitáveis, essas agressões ao meio ambiente. Nesse âmbito, é natural que tenha surgido a ideia de aplicar uma metodologia tão precisa e rigorosa como a LCA ao sector da construção. No entanto, nos dias de hoje, as preocupações alargaram-se às vertentes social e económica que, juntamente com a vertente ambiental, formam o triângulo de equilíbrio do desenvolvimento sustentável. É precisamente essa avaliação tripartida que esta Dissertação pretende abordar, tentando aprofundar conhecimentos e fornecer alternativas, através da análise crítica, que possam contribuir para a melhoria contínua desta metodologia.

A brincadeira e o género em jardim-de-infância

Relatório da Prática Profissional Supervisionada Mestrado em Educação Pré-Escolar

Cobs and stair nesting – segregation and crossing

Stair nesting leads to very light models since the number of their treatments is additive on the numbers of observations in which only the level of one factor various. These groups of observations will be the steps of the design. In stair nested designs we work with fewer observations when compared with balanced nested designs and the amount of information for the different factors is more evenly distributed. We now integrate these models into a special class of models with orthogonal block structure for which there are interesting properties.

O envolvimento familiar na vida escolar dos alunos

Relatório Final apresentado à Escola Superior de Educação de Lisboa para obtenção de grau de mestre em Ensino do 1º e do 2º Ciclo do Ensino Básico

Construção de um variador de frequência

A dificuldade de controlo de um motor de indução, bem como o armazenamento de energia CC e posterior utilização como energia alternada promoveram o desenvolvimento de variadores de frequência e inversores. Assim, como projeto de tese de mestrado em Automação e Sistemas surge o desenvolvimento de um variador de frequência. Para elaboração do variador de frequência efetuou-se um estudo sobre as técnicas de modulação utilizadas nos inversores. A técnica escolhida e utilizada é a Sinusoidal Pulse Width Modulation (SPWM). Esta técnica baseia-se na modelação por largura de impulso (PWM), o qual é formado por comparação de um sinal de referência com um sinal de portadora de elevada frequência. Por sua vez, a topologia escolhida para o inversor corresponde a um Voltage Source Inverter (VSI) de ponte trifásica completa a três terminais. O desenvolvimento da técnica de modulação SPWM levou ao desenvolvimento de um modelo de simulação em SIMULINK, o qual permitiu retirar conclusões sobre os resultados obtidos. Na fase de implementação, foram desenvolvidas placas para o funcionamento do variador de frequência. Assim, numa fase inicial foi desenvolvida a placa de controlo, a qual contém a unidade de processamento e que é responsável pela atuação de Insulated Gate Bipolar Transistors (IGBTs). Para além disso, foi desenvolvida uma placa para proteção dos IGBTs (evitando condução simultânea no mesmo terminal) e uma placa de fontes isoladas para alimentação dos circuitos e para atuação dos IGBTs. Ainda, foi desenvolvida a técnica de SPWM em software para a unidade de controlo e finalmente foi desenvolvida uma interface gráfica para interação com o utilizador. A validação do projeto foi conseguida através da variação da velocidade do motor de indução trifásico. Para isso, este foi colocado a funcionar a diversas frequências de funcionamento e a diferentes amplitudes. Para além disso, o seu funcionamento foi também validado utilizando uma carga trifásica equilibrada de 3 lâmpadas de forma a ser visualizada a variação de frequência e variação de amplitude.

The operation of autonomous mobile robot assistants in the environment of care facilities adopting a user-centered development design

The participation of the Fraunhofer Institute for Manufacturing Engineering and Automation IPA (Stuttgart, Germany) and the companies User Interface Design GmbH (Ludwigsburg, Germany) plus MLR System GmbH (Ludwigsburg, Germany) enabled the research and findings presented in this paper; we would like to namely mention Birgit Graf and Theo Jacobs (Fraunhofer IPA) furthermore Peter Klein and Christiane Hartmann (User Interface Design GmbH).

Metodologia para otimização da manutenção

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia da Manutenção