Thermally-induced change in the relaxation behavior of skin tissue.

Skin biothermomechanics is highly interdisciplinary, involving bioheat transfer, burn damage, biomechanics, and physiology. Characterization of the thermomechanical behavior of skin tissue is of great importance and can contribute to a variety of medical applications. However, few quantitative studies have been conducted on the thermally-dependent mechanical properties of skin tissue. The aim of the present study is to experimentally examine the thermally-induced change in the relaxation behavior of skin tissue in both hyperthermal and hypothermic ranges. The results show that temperature has great influence on the stress-relaxation behavior of skin tissue under both hyperthermal and hypothermic temperatures; the quantitative relationship that has been found between temperature and the viscoelastic parameter (the elastic fraction or fractional energy dissipation) was temperature dependent, with greatest dissipation at high temperature levels.

Microbial community analysis of Acropora palamata mucus swabs, water and sediment samples from Hawksnest Bay, St. John, U.S. Virgin Islands

Colonies of the scleractinian coral Acropora palmata, listed as threatened under the US Endangered Species Act in 2006, have been monitored in Hawksnest Bay, within Virgin Islands National Park, St. John, from 2004 through 2010 by scientists with the US Geological Survey, National Park Service, and the University of the Virgin Islands. The focus has been on documenting the prevalence of disease, including white band, white pox (also called patchy necrosis and white patches), and unidentified diseases (Rogers et al., 2008; Muller et al., 2008). In an effort to learn more about the pathologies that might be involved with the diseases that were observed, samples were collected from apparently healthy and diseased colonies in July 2009 for analysis. Two different microbial assays were performed on Epicentre Biotechnologies DNA swabs containing A. palmata coral mucus, and on water and sediment samples collected in Hawksnest Bay. Both assays are based on polymerase chain reaction (PCR) amplification of portions of the small rRNA gene (16S). The objectives were to determine 1) if known coral bacterial pathogens Serratia marcescens (Acroporid Serratiosis), Vibrio coralliilyticus (temperature-dependent bleaching, White Syndrome), Vibrio shiloi (bleaching, necrosis), and Aurantimonas coralicida (White Plague Type II) were present in any samples, and 2) if there were any differences in microbial community profiles of each healthy, unaffected or diseased coral mucus swab. In addition to coral mucus, water and sediment samples were included to show ambient microbial populations. In the first test, PCR was used to separately amplify the unique and diagnostic region of the 16S rRNA gene for each of the coral pathogens being screened. Each pathogen test was designed so that an amplified DNA fragment could be seen only if the specific pathogen was present in a sample. A positive result was indicated by bands of DNA of the appropriate size on an agarose gel, which separates DNA fragments based on the size of the molecule. DNA from pure cultures of each of the pathogens was used as a positive control for each assay.

Beam propagation modelling of tapered waveguide lasers

A dynamic beam propagation model allows design optimization of high power low divergence tapered waveguide lasers. The model is extended to include spatially-resolved temperature profiles and a temperature dependent gain. Using this model, design parameters such as the optimum facet reflectivity, taper angle, and waveguide dimension can be calculated for low far-field divergence and high continuous wave power.

The study of biological characteristic and population dynamic of Caspian vimba (Vimba vimba persa), in coastal waters of Caspian Sea (Mazandaran Province)

This study was conducted to determine reproduction characteristics, diet regime, age structure and population dynamics parameters of the vimba vimba persa (Pallas, 1811) in Mazandaran waters of the Caspian Sea, from October 2008 to September 2009. A total of 994 specimens were monthly collected by beach seine and cast net from six fish landings of Ramsar, Tonekabon, Chaloos, Mahmood Abad, Sari and Behshahr. Biometric characters were measured for each specimen at the laboratory. Scales were used for age determination. Sex determination and fecundity were determined. Population dynamic parameters as well as stock assessment including cohort analysis were estimated using FISAT software. The finding showed that the mean of fork length and body weight of the Caspian Vimba were 168.4±2.6 mm and 71.94±32.24 g respectively. Strong correlation was found between these two variables (a= 0.012; b = 3.047; r2 = 0.955). 92 specimens were studied from the fecundity point of view. This species was found to have more abundance in spring (esp. Apr-May). The samples composed of 397(42.6%) male, 537(57.4%) female; Overall sex ratio (M: F =1: 1.35) was significantly different from the expected 1:1 ratio (p ≤0.05). The advanced stages of maturity (4th & 5th) were found in April and May. The highest Gonadosomatic Index in female was in May and the lowest one was in July. This fish is therefore a spring spawner. The maximum absolute and relative fecundities were 34640 and 260.9, respectively; the minimum absolute and relative fecundities were 5400 and 94.5 respectively. The averages of absolute and relative fecundities were 17198±7710 and 171.85±48.8, respectively. Coefficient vacuity index was 59.2% which indicates that this fish is mesophagous. Among of living creature consumes by Caspian Vimba mollusks, 76 arthropods, worms, plants, detritus and fishes were found 32.9% , 26.7% , 13.4% , 17% , 4.4% and 1.6% respectively. The infinite fork lengths were 261 mm for females, 25mm for males and 261 mm for both sexes respectively. For population growth and mortality parameters; K ( 0.28 per year for both sexes, 0.3 per year for males, 0.33 per year for females); t0 ( -0.65 year for both sexes, -0.23 year in females, -0.51 year in males ); Φ' ( 2.28 ); Z ( 0.98 per year ); M ( 0.59 per year); F ( 0.39 per year) and Exploitation coefficient was 0.4. The analysis showed that total biomass and MSY were 1336 and 528.8 tonnes respectively.

Indian squid, Uroteuthis duvauceli, is an important commercial marine fauna in the coastal waters of Oman Sea

About 3600 specimens were collected by bottom trawl at 15 sampling stations. 24 biometric characters were measured for each specimens at the laboratory.. Microscopic cross – sections of statolith were used for age determination. Sex determination and fecundity were determined. Population dynamics parameters as well as stock as stock assessment including cohort analysis were estimated using FISAT software. The findings showed that Dorsal Mantle Length (DML) and Body weight (BW) of the Indian squid were 133.9 ± 0.78 mm and 99.61 ± 0.95 g respectively. Strong correlation was found between these 2 variables (R2 = 0.90). The maximum age was 5 years. Relationship between DML and age was highly significantly of p ≤ 0.05. Overall sex ratio (M: F = 0.52) was significantly different from the expected 1:1 ratio (p ≤ 0.05). The ovary weight and nidamental glands weight were 7.72 ± 0.0006 g and 3.07 ± 0.0003g respectively. Absolute and relative fecundity of the Indian squid were found to be 122733 ± 30.87 and 2348 ± 0.4 respectively. GSI were 14.35 in April and 8.63 in July. This squid is therefore a spring spawner. The infinite dorsal mantle length were 258.62 mm for females, 194.72 mm for males and 252.02 for both sexes respectively. For population growth and mortality parameters; K (0.65 per year for both sexes, 0.85 per year for males, 0.65 per year for females); t0 (0.24year for both sexes, 0.22 year in females, 0.26 year in male); φ` (2.30 in both sexes, 2.47 for males, 2.37 for females); Z (1.17 per year for both sexes, 1.10 per year in females, 1.39 per year, in males); M (0.70 per year for both sexes, 0.90 for males, 0.67 for females); F(0.27 per year for both sexes, 0.27 per year in males, 0.195 per year in females). Exploitation coefficient were 0.51 per year for both sexes, 0.57 per year males and 0.51 per year females respectively. The results indicates that since the Indian squid is a short live aquatic organism, therefore, the exploitation coefficient could be raised to 0.7 per year. The analysis showed that total biomass and MSY were 10103.5 ton and 2576.4 ton respectively. These findings are the first study of its sort about the Indian squid in the coastal waters of Oman Sea as well as North-West of Indian Ocean.

Influence of dew on biomass and photosystem II activity of cyanobacterial crusts in the Hopq Desert, northwest China

Dew is an important water source for desert organisms in semiarid and arid regions. Both field and laboratory experiments were conducted to investigate the possible roles of dew in growth of biomass and photosynthetic activity within cyanobacterial crust. The cyanobacteria, Microcoleus vaginatus Gom. and Scytonema javanicum (Kutz.) Born et Flah., were begun with stock cultures and sequential mass cultivations, and then the field experiment was performed by inoculating the inocula onto shifting sand for forming cyanobacterial crust during late summer and autumn of 2007 in Hopq Desert, northwest China. Measurements of dew amount and Chlorophyll a content were carried out in order to evaluate the changes in crust biomass following dew. Also, we determined the activity of photosystem II(PSII) within the crust in the laboratory by simulating the desiccation/rehydration process due to dew. Results showed that the average daily dew amount as measured by the cloth-plate method (CPM) was 0.154 mm during fifty-three days and that the crust biomass fluctuated from initial inoculation of 4.3 mu g Chlorophyll a cm(-2) sand to 5.8-7.3 mu g Chlorophyll a cm(-2) crust when dew acted as the sole water source, and reached a peak value of approximately 8.2 mu g Chlorophyll a cm(-2) crust owing to rainfalls. It indicated that there was a highly significant correlation between dew amounts and crust moistures (r = 0.897 or r = 0.882, all P < 0.0001), but not a significant correlation between dew and the biomass (r = 0.246 or r = 0.257, all P > 0.05), and thus concluded that dew might only play a relatively limited role in regulating the crust biomass. Correspondingly, we found that rains significantly facilitated biomass increase of the cyanobacterial crust. Results from the simulative experiment upon rehydration showed that approximately 80% of PSII activity could be achieved within about 50 min after rehydration in the dark and at 5 degrees C, and only about 20% of the activity was light-temperature dependent. This might mean that dew was crucial for cyanobacterial crust to rapidly activate photosynthetic activity during desiccation and rehydration despite low temperatures and weak light before dawn. It also showed in this study that the cyanobacterial crusts could receive and retain more dew than sand, which depended on microclimatic characteristics and soil properties of the crusts. It may be necessary for us to fully understanding the influence of dew on regulating the growth and activity of cyanobacterial crust, and to soundly evaluate the crust's potential application in fighting desertification because of the available water due to dew. (C) 2009 Published by Elsevier Ltd.

Discovery of a male-biased mutant family and identification of a male-specific SCAR marker in gynogenetic gibel carp Carassius auratus gibelio

Gibel carp ( Carassius auratus gibelio) is a uniquely gynogenetic species with a minor ratio of males in natural habitats, but its male origin and sex determination mechanisms have been unknown. In this study, a male-biased mutant family was discovered from the gynogenetic gibel carp, and a male-specific SCAR marker was identified from the mutant family. Normal spermatogenesis was observed in the male testes by immuno. fluorescence histochemistry. Nearly identical AFLP profiles were observed between males and females, but a male-specific 86 bp AFLP fragment was screened by sex-pool bulked segregant analysis and individual screening. Based on the male-specific AFLP fragment, a total of 579 bp sequences were cloned by genome walking. Subsequently, a male-specific SCAR marker was designed, and the male-specific DNA fragment was confirmed to be steadily transmitted to the next generation and consistently detected only in males. (C) 2009 National Natural Science Foundation of China and Chinese Academy of Sciences. Published by Elsevier Limited and Science in China Press. All rights reserved.

Scalar gradient behaviour in MILD combustion

The results of three-dimensional Direct Numerical Simulation (DNS) of Moderate, Intense Low-oxygen Dilution (MILD) and conventional premixed turbulent combustion conducted using a skeletal mechanism including the effects of non-unity Lewis numbers and temperature dependent transport properties are analysed to investigate combustion characteristics using scalar gradient information. The DNS data is also used to synthesise laser induced fluorescence (LIF) signals of OH, CH2O, and CHO. These signals are analysed to verify if they can be used to study turbulent MILD combustion and it has been observed that at least two (OH and CH2O) LIF signals are required since the OH increase across the reaction zone is smaller in MILD combustion compared to premixed combustion. The scalar gradient PDFs conditioned on the reaction rate obtained from the DNS data and synthesised LIF signals suggests a strong gradient in the direction normal to the MILD reaction zone with moderate reaction rate implying flamelet combustion. However, the PDF of the normal gradient is as broad as for the tangential gradient when the reaction rate is high. This suggests a non-flamelet behaviour, which is due to interaction of reaction zones. The analysis of the conditional PDFs for the premixed case confirms the expected behaviour of scalar gradient in flamelet combustion. It has been shown that the LIF signals synthesised using 2D slices of DNS data also provide very similar insights. These results demonstrate that the so-called flameless combustion is not an idealised homogeneous reactive mixture but has common features of conventional combustion while containing distinctive characteristics. © 2013 The Combustion Institute.

A genetic map of large yellow croaker Pseudosciaena crocea

Genetic linkage maps were constructed for large yellow croaker Pseudosciaena crocea (Richardson, 1846) using AFLP and microsatellite markers in an F-1 family. Five hundred and twenty-three AFLP markers and 36 microsatellites were genotyped in the parents and 94 F-1 progeny. Among these, 362 AFLP markers and 13 SSR markers followed the 1:1 Mendelian segregation ratio (P > 0.05). The female genetic map contained 181 AFLP and 7 microsatellite markers forming 24 linkage groups spanning 2959.1 cM, while the male map consisted of 153 AFLP and 8 microsatellite markers in 23 linkage groups covering 2205.7 cM. One sex linked marker was mapped to the male map and co-segregated with the AFLP marker agacta355, suggesting an XY-male determination mechanism and this may be useful in the breeding of monosex populations. (c) 2007 Elsevier B.V. All rights reserved.

Photosynthetic characteristics of the economic brown seaweed Hizikia fusiforme (Sargassaceae, Phaeophyta), with special reference to its "leaf" and receptacle

Photosynthetic responses to irradiance and temperature of "leaves" and receptacles were compared in February ( vegetative stage) and May ( reproductive stage) in the seaweed, Hizikia fusiforme ( Harvey) Okamura (Sargassaceae, Phaeophyta) from Nanao Island, Shantou, China. Irradiance-saturated photosynthesis (P-max) was significantly higher in receptacles than in "leaves" on a fresh weight basis, and that of "leaves" was greater in May than in February at ambient seawater temperatures. The optimum temperature for P-max was 30 degrees C for both "leaves" and receptacles, being 5 - 10 degrees C higher than the ambient seawater temperature. The apparent photosynthetic efficiencies were greater in receptacles than in "leaves" within the tested temperature range of 10 - 40 degrees C. The irradiance for saturating photosynthesis for both "leaves" and receptacles was temperature-dependent, with the highest values ( about 200 mu mol photons m(-2) s(-1)) at 30 degrees C.

Physical connection and disconnection control based on hot melt adhesives

Physical connection and disconnection control has practical meanings for robot applications. Compared to conventional connection mechanisms, bonding involving a thermal process could provide high connection strength, high repeatability, and power-free connection maintenance, etc. In terms of disconnection, an established bond can be easily weakened with a temperature rise of the material used to form the bond. Hot melt adhesives (HMAs) are such material that can form adhesive bonds with any solid surfaces through a thermally induced solidification process. This paper proposes a novel control method for automatic connection and disconnection based on HMAs. More specifically, mathematical models are first established to describe the flowing behavior of HMAs at higher temperatures, as well as the temperature-dependent strength of an established HMA bond. These models are then validated with a specific type of HMA in a minimalistic robot setup equipped with two mechatronic devices for automated material handling. The validated models are eventually used for determining open parameters in a feedback controller for the robot to perform a pick-and-place task. Through a series of trials with different wooden and aluminum parts, we evaluate the performance of the automatic connection and disconnection methods in terms of speed, energy consumption, and robustness. © 1996-2012 IEEE.

In situ thermoplastic thread formation for robot built structures

We demonstrate autonomous construction of structures using a robot arm that can fabricate threads of TPA (Thermoplastic Adhesive) in free space on the fly. TPA has many important material properties that help to greatly simplify the otherwise complex task of building structures in complex environments. We present a model for the formation of TPA strings based on plastic deformation which also includes the temperature dependent material properties which change significantly as the thread is formed and cools. Experiments of drawing TPA show that drawing forces due to the viscosity of the TPA are more dominated by the speed of drawing than the changes in viscosity due to temperature. The load bearing capacity of individual strings is also modelled and measured and structures are built using the TPA strings which due to the adhesiveness can be anchored to a wide range surfaces as well as to other strings. © 2013 IEEE.

A conserved family of doublesex-related genes from fishes

The sex-determining gene Mab-3 of C. elegans and the doublesex gene of Drosophila each contain a common DM domain and share a similar role. Human doublesex-related gene DMRT1 also encodes a conserved DM-related DNA-binding domain. We present here the amplification of a broad range of DM domain sequences from three fish species using degenerate PCR. Our results reveal unexpected complexity of the DM domain gene family in vertebrates. (C) 2002 Wiley-Liss, Inc.

Highly efficient photoluminescence of Er2SiO5 films grown by reactive magnetron sputtering method

E2SiO5 thin films were fabricated on Si substrate by reactive magnetron sputtering method with subsequent annealing treatment. The morphology properties of as-deposited films have been studied by scanning electron microscope. The fraction of erbium is estimated to be 23.5 at% based on Rutherford backscattering measurement in as-deposited Er-Si-O film. X-ray diffraction measurement revealed that Er2SiO5 crystalline structure was formed as sample treated at 1100 degrees C for 1 h in O-2 atmosphere. Through proper thermal treatment, the 1.53 mu m Er3+-related emission intensity can be enhanced by a factor of 50 with respect to the sample annealed at 800 degrees C. Analysis of pump-power dependence of Er3+ PL intensity indicated that the upconversion phenomenon could be neglected even under a high photon flux of 10(21) (photons/cm(2)/sec). Temperature-dependent photoluminescence (PL) of Er2SiO5 was studied and showed a weak thermal quenching factor of 2. Highly efficienct photoluminescence of Er2SiO5 films has been demonstrated with Er3+ concentration of 10(22)/cm(3), and it opens a promising way towards future Si-based light source for Si photonics. (C) 2009 Elsevier B.V. All rights reserved.

Effects of GaN Capping on the Structural and the Optical Properties of InN Nanostructures Grown by Using MOCVD

InN nanostructures with and without GaN capping layers were grown by using metal-organic chemical vapor deposition. Morphological, structural, and optical properties were systematically studied by using atomic force microscopy, X-ray diffraction (XRD) and temperature-dependent photoluminescence (PL). XRD results show that an InGaN structure is formed for the sample with a GaN capping layer, which will reduce the quality and the IR PL emission of the InN. The lower emission peak at similar to 0.7 eV was theoretically fitted and assigned as the band edge emission of InN. Temperature-dependent PL shows a good quantum efficiency for the sample without a GaN capping layers; this corresponds to a lower density of dislocations and a small activation energy.