Effect of repeated torque/mechanical loading cycles on two different abutment types in implants with internal tapered connections: an in vitro study

Internal tapered connections were developed to improve biomechanical properties and to reduce mechanical problems found in other implant connection systems. The purpose of this study was to evaluate the effects of mechanical loading and repeated insertion/removal cycles on the torque loss of abutments with internal tapered connections. Sixty-eight conical implants and 68 abutments of two types were used. They were divided into four groups: groups 1 and 3 received solid abutments, and groups 2 and 4 received two-piece abutments. In groups 1 and 2, abutments were simply installed and uninstalled; torque-in and torque-out values were measured. In groups 3 and 4, abutments were installed, mechanically loaded and uninstalled; torque-in and torque-out values were measured. Under mechanical loading, two-piece abutments were frictionally locked into the implant; thus, data of group 4 were catalogued under two subgroups (4a: torque-out value necessary to loosen the fixation screw; 4b: torque-out value necessary to remove the abutment from the implant). Ten insertion/removal cycles were performed for every implant/abutment assembly. Data were analyzed with a mixed linear model (P <= 0.05). Torque loss was higher in groups 4a and 2 (over 30% loss), followed by group 1 (10.5% loss), group 3 (5.4% loss) and group 4b (39% torque gain). All the results were significantly different. As the number of insertion/removal cycles increased, removal torques tended to be lower. It was concluded that mechanical loading increased removal torque of loaded abutments in comparison with unloaded abutments, and removal torque values tended to decrease as the number of insertion/removal cycles increased. To cite this article:Ricciardi Coppede A, de Mattos MdaGC, Rodrigues RCS, Ribeiro RF. Effect of repeated torque/mechanical loading cycles on two different abutment types in implants with internal tapered connections: an in vitro study.Clin. Oral Impl. Res. 20, 2009; 624-632.doi: 10.1111/j.1600-0501.2008.01690.x.

Study of some physical properties of biodegradable films based on blends of gelatin and poly(vinyl alcohol) using a response-surface methodology

The aim of this work was to study the effect of the hydrolysis degree (HD) and the concentration (C(PVA)) Of two types of poly(vinyl alcohol) (PVA) and of the type (glycerol and sorbitol) and the concentration (C(P)) of plasticizers on some physical properties of biodegradable films based on blends of gelatin and PVA Using a response-surface methodology. The films were prepared with a film forming solutions (FFS) with 2 g of macromolecules (gelatin+PVA)/100 g de FFS. The responses analyzed were the mechanical properties, the solubility, the moisture Content. the color difference and the opacity. The linear model was statistically significant and predictive for puncture force and deformation. elongation at break, solubility in water, Moisture content and opacity. The CPVA affected strongly the elongation at break of the films. The interaction of the HD and the C(P) affected this property. Moreover. the puncture force was affected slightly by the C(PVA). Concerning the Solubility in water, the reduction of the HD increased it and this effect was greater for high CPVA Values. In general. the most important effect observed in the physical properties of the films was that of the plasticizer type and concentration. The PVA hydrolysis degree and concentration have an important effect only for the elongation at break, puncture deformation and solubility in water. (C) 2008 Elsevier B.V. All rights reserved.

DYNAMIC AND STEADY-SHEAR RHEOLOGICAL PROPERTIES OF XANTHAN AND GUAR GUMS DISPERSED IN YELLOW PASSION FRUIT PULP (Passiflora edulis f. flavicarpa)

Yellow passion fruit pulp is unstable, presenting phase separation that can be avoided by the addition of hydrocolloids. For this purpose, xanthan and guar gum [0.3, 0.7 and 1.0% (w/w)] were added to yellow passion fruit pulp and the changes in the dynamic and steady-shear rheological behavior evaluated. Xanthan dispersions showed a more pronounced pseudoplasticity and the presence of yield stress, which was not observed in the guar gum dispersions. Cross model fitting to flow curves showed that the xanthan suspensions also had higher zero shear viscosity than the guar suspensions, and, for both gums, an increase in temperature led to lower values for this parameter. The gums showed different behavior as a function of temperature in the range of 5-35 degrees C. The activation energy of the apparent viscosity was dependent on the shear rate and gum concentration for guar, whereas for xanthan these values only varied with the concentration. The mechanical spectra were well described by the generalized Maxwell model and the xanthan dispersions showed a more elastic character than the guar dispersions, with higher values for the relaxation time. Xanthan was characterized as a weak gel, while guar presented a concentrated solution behavior. The simultaneous evaluation of temperature and concentration showed a stronger influence of the polysaccharide concentration on the apparent viscosity and the G` and G `` moduli than the variation in temperature.

Rural property size drives patterns of upland and riparian forest retention in a tropical deforestation frontier

Deforestation in Brazilian Amazonia accounts for a disproportionate global scale fraction of both carbon emissions from biomass burning and biodiversity erosion through habitat loss. Here we use field- and remote-sensing data to examine the effects of private landholding size on the amount and type of forest cover retained within economically active rural properties in an aging southern Amazonian deforestation frontier. Data on both upland and riparian forest cover from a survey of 300 rural properties indicated that 49.4% (SD = 29.0%) of the total forest cover was maintained as of 2007. and that property size is a key regional-scale determinant of patterns of deforestation and land-use change. Small properties (<= 150 ha) retained a lower proportion of forest (20.7%, SD = 17.6) than did large properties (>150 ha; 55.6%, SD = 27.2). Generalized linear models showed that property size had a positive effect on remaining areas of both upland and total forest cover. Using a Landsat time-series, the age of first clear-cutting that could be mapped within the boundaries of each property had a negative effect on the proportion of upland, riparian, and total forest cover retained. Based on these data, we show contrasts in land-use strategies between smallholders and largeholders, as well as differences in compliance with legal requirements in relation to minimum forest cover set-asides within private landholdings. This suggests that property size structure must be explicitly considered in landscape-scale conservation planning initiatives guiding agro-pastoral frontier expansion into remaining areas of tropical forest. (C) 2010 Elsevier Ltd. All rights reserved.

The constrained compartmentalized knapsack problem: mathematical models and solution methods

The constrained compartmentalized knapsack problem can be seen as an extension of the constrained knapsack problem. However, the items are grouped into different classes so that the overall knapsack has to be divided into compartments, and each compartment is loaded with items from the same class. Moreover, building a compartment incurs a fixed cost and a fixed loss of the capacity in the original knapsack, and the compartments are lower and upper bounded. The objective is to maximize the total value of the items loaded in the overall knapsack minus the cost of the compartments. This problem has been formulated as an integer non-linear program, and in this paper, we reformulate the non-linear model as an integer linear master problem with a large number of variables. Some heuristics based on the solution of the restricted master problem are investigated. A new and more compact integer linear model is also presented, which can be solved by a branch-and-bound commercial solver that found most of the optimal solutions for the constrained compartmentalized knapsack problem. On the other hand, heuristics provide good solutions with low computational effort. (C) 2011 Elsevier BM. All rights reserved.

Job rotation in assembly lines employing disabled workers

In this paper we consider the programming of job rotation in the assembly line worker assignment and balancing problem. The motivation for this study comes from the designing of assembly lines in sheltered work centers for the disabled, where workers have different task execution times. In this context, the well-known training aspects associated with job rotation are particularly desired. We propose a metric along with a mixed integer linear model and a heuristic decomposition method to solve this new job rotation problem. Computational results show the efficacy of the proposed heuristics. (C) 2009 Elsevier B.V. All rights reserved.

Comparing diagnostic tests with missing data

When missing data occur in studies designed to compare the accuracy of diagnostic tests, a common, though naive, practice is to base the comparison of sensitivity, specificity, as well as of positive and negative predictive values on some subset of the data that fits into methods implemented in standard statistical packages. Such methods are usually valid only under the strong missing completely at random (MCAR) assumption and may generate biased and less precise estimates. We review some models that use the dependence structure of the completely observed cases to incorporate the information of the partially categorized observations into the analysis and show how they may be fitted via a two-stage hybrid process involving maximum likelihood in the first stage and weighted least squares in the second. We indicate how computational subroutines written in R may be used to fit the proposed models and illustrate the different analysis strategies with observational data collected to compare the accuracy of three distinct non-invasive diagnostic methods for endometriosis. The results indicate that even when the MCAR assumption is plausible, the naive partial analyses should be avoided.

Local Influence Under Parameter Constraints

Calculations of local influence curvatures and leverage have been well developed when the parameters are unrestricted. In this article, we discuss the assessment of local influence and leverage under linear equality parameter constraints with extensions to inequality constraints. Using a penalized quadratic function we express the normal curvature of local influence for arbitrary perturbation schemes and the generalized leverage matrix in interpretable forms, which depend on restricted and unrestricted components. The results are quite general and can be applied in various statistical models. In particular, we derive the normal curvature under three useful perturbation schemes for generalized linear models. Four illustrative examples are analyzed by the methodology developed in the article.

Skovgaard`s adjustment to likelihood ratio tests in exponential family nonlinear models

Likelihood ratio tests can be substantially size distorted in small- and moderate-sized samples. In this paper, we apply Skovgaard`s [Skovgaard, I.M., 2001. Likelihood asymptotics. Scandinavian journal of Statistics 28, 3-321] adjusted likelihood ratio statistic to exponential family nonlinear models. We show that the adjustment term has a simple compact form that can be easily implemented from standard statistical software. The adjusted statistic is approximately distributed as X(2) with high degree of accuracy. It is applicable in wide generality since it allows both the parameter of interest and the nuisance parameter to be vector-valued. Unlike the modified profile likelihood ratio statistic obtained from Cox and Reid [Cox, D.R., Reid, N., 1987. Parameter orthogonality and approximate conditional inference. journal of the Royal Statistical Society B49, 1-39], the adjusted statistic proposed here does not require an orthogonal parameterization. Numerical comparison of likelihood-based tests of varying dispersion favors the test we propose and a Bartlett-corrected version of the modified profile likelihood ratio test recently obtained by Cysneiros and Ferrari [Cysneiros, A.H.M.A., Ferrari, S.L.P., 2006. An improved likelihood ratio test for varying dispersion in exponential family nonlinear models. Statistics and Probability Letters 76 (3), 255-265]. (C) 2008 Elsevier B.V. All rights reserved.

Bias-corrected estimators for dispersion models with dispersion covariates

In this paper we discuss bias-corrected estimators for the regression and the dispersion parameters in an extended class of dispersion models (Jorgensen, 1997b). This class extends the regular dispersion models by letting the dispersion parameter vary throughout the observations, and contains the dispersion models as particular case. General formulae for the O(n(-1)) bias are obtained explicitly in dispersion models with dispersion covariates, which generalize previous results obtained by Botter and Cordeiro (1998), Cordeiro and McCullagh (1991), Cordeiro and Vasconcellos (1999), and Paula (1992). The practical use of the formulae is that we can derive closed-form expressions for the O(n(-1)) biases of the maximum likelihood estimators of the regression and dispersion parameters when the information matrix has a closed-form. Various expressions for the O(n(-1)) biases are given for special models. The formulae have advantages for numerical purposes because they require only a supplementary weighted linear regression. We also compare these bias-corrected estimators with two different estimators which are also bias-free to order O(n(-1)) that are based on bootstrap methods. These estimators are compared by simulation. (C) 2011 Elsevier B.V. All rights reserved.

Birnbaum-Saunders nonlinear regression models

We introduce, for the first time, a new class of Birnbaum-Saunders nonlinear regression models potentially useful in lifetime data analysis. The class generalizes the regression model described by Rieck and Nedelman [Rieck, J.R., Nedelman, J.R., 1991. A log-linear model for the Birnbaum-Saunders distribution. Technometrics 33, 51-60]. We discuss maximum-likelihood estimation for the parameters of the model, and derive closed-form expressions for the second-order biases of these estimates. Our formulae are easily computed as ordinary linear regressions and are then used to define bias corrected maximum-likelihood estimates. Some simulation results show that the bias correction scheme yields nearly unbiased estimates without increasing the mean squared errors. Two empirical applications are analysed and discussed. Crown Copyright (C) 2009 Published by Elsevier B.V. All rights reserved.

Aspectos do mercado eleitoral brasileiro: análise econométrica do impacto dos gastos de campanha nas eleições para a Câmara e o Senado de 2002

Esta dissertação de mestrado em economia foi motivada por uma questão complexa bastante estudada na literatura de economia política nos dias de hoje: as formas como campanhas políticas afetam votação em uma eleição. estudo procura modelar mercado eleitoral brasileiro para deputados federais senadores. Através de um modelo linear, conclui-se que os gastos em campanha eleitoral são fatores decisivos para eleição de um candidato deputado federal. Após reconhecer que variável que mede os gastos em campanha possui erro de medida (devido ao famoso "caixa dois", por exemplo), além de ser endógena uma vez que candidatos com maiores possibilidades de conseguir votos conseguem mais fontes de financiamento -, modelo foi estimado por variáveis instrumentais. Para senadores, utilizando modelos lineares modelos com variável resposta binaria, verifica-se também importância, ainda que em menor escala, da campanha eleitoral, sendo que um fator mais importante para corrida ao senado parece ser uma percepção priori da qualidade do candidato.

Influência de um programa de intervenção motora inclusiva no desenvolvimento motor e social de crianças com atrasos motores

O objetivo desta pesquisa, de delineamento quase-experimental, foi verificar a influência de um Programa de Intervenção Motora Inclusiva (PIMI) no desenvolvimento motor (DM) e social (DS) de crianças, portadoras (PNEE) e não portadoras de necessidades educacionais especiais (n-PNEE), com atrasos motores. A amostra desta pesquisa foi não probabilística, intencional, composta por 76 crianças (43 meninos e 33 meninas), com idades de 4 a 10 anos (M=7,00, DP=1,44), sendo 24 (31,6%) crianças PNEE e 52 (68,4%) crianças n-PNEE, que apresentaram desempenho motores inferiores a seus pares, configurando atrasos motores, avaliados por meio do Test of Gross Motor Development- 2 (TGMD-2) (ULRICH, 2000). Trinta e cinco crianças constituíram o Grupo de Intervenção (GI) e quarenta e uma crianças constituíram o Grupo Controle (GC). Para a avaliação do DM das crianças dos grupos foi utilizado o TGMD-2 e para a avaliação do DS das crianças do GI foi utilizado a estrutura de Níveis de Responsabilidade Social e Pessoal (HELLISON, 2003). O PIMI foi desenvolvido em 14 semanas, implementando os princípios do Contexto Motivacional para a Maestria e os pressupostos da estrutura TARGET. General Linear Model com medidas repetidas no fator tempo foi conduzida para avaliar os efeitos do PIMI no DM das crianças. Para a análise do DS foi utilizado o teste de Friedman. Os resultados indicaram que (1) crianças, PNEE e n- PNEE, do GI demonstraram ganhos significantes em habilidades de locomoção e de controle de objeto do pré-teste para o pós-teste, enquanto que para as crianças, PNEE e n-PNEE, do GC mudanças significativas não foram encontradas, (2) crianças, PNEE e n-PNEE, do GI demonstraram desempenho significantemente superior em habilidades de locomoção e de controle de objeto comparadas as crianças, PNEE e n-PNEE, do GC no pós-teste, (3) crianças PNEE, do GI, demonstraram padrões de mudanças positivas e significativas do pré-teste para o pós-teste nas habilidades de locomoção e de controle de objeto semelhantes aos seus pares n-PNE do mesmo grupo, (4) crianças PNEE, do GI, demonstraram no pós-teste desempenho significantemente superior nas habilidades de locomoção e controle de objetos comparadas aos seus pares PNEE do GC, (5) crianças n-PNEE, do GI, demonstraram no pós-teste desempenho significantemente superior nas habilidades de locomoção e de controle de objeto comparadas aos seus pares n-PNEE do GC, (6) crianças, PNEE e n-PNEE, do GI, demonstraram mudanças positivas e significativas no DS no contexto de aprendizagem por meio da conquista de níveis de responsabilidade social e pessoal mais elevados, no decorrer do PIMI, (7) crianças PNEE, do GI, demonstraram padrões de mudanças positivas e significativas no DS semelhantes aos seus pares n-PNEE do mesmo grupo. E mais, a implementação do Contexto Motivacional para a Maestria possibilitou a participação cooperativa e efetiva de todas as crianças indiferentemente dos níveis de habilidade motora.

Custos de provisão de cestas de bens públicos

Há décadas os economistas se preocupam com o problema de calcular o Custo Marginal do Financiamento Público (MCF, em inglês). Um dos maiores sucessos nessa área é o modelo de provisão de bem público com taxação distorciva de Wildasin (1984). Nós generalizamos o modelo de Wildasin para incluir uma cesta de bens públicos, ao invés de um único bem. Em seguida realizamos várias estimativas do MCF para o Brasil, algumas inclusive sem a hipótese de independência entre o nível de bem público e a oferta de trabalho, usual na literatura. Os resultados mostram que o Custo Marginal do Financiamento Público no Brasil é relativamente pequeno, entre outras causas devido à pequena sensibilidade da oferta de trabalho ao gasto governamental

Indicadores de renda baseados em consumo de energia elétrica: abordagens domiciliar e regional na perspectiva da estatística espacial

Com o objetivo de avaliar o uso do consumo de energia elétrica como indicador socioeconômico, esta pesquisa analisa informações em dois níveis de agregação geográfica. No primeiro, sob perspectiva territorial, investiga indicadores de Renda e Consumo de Energia Elétrica agregados por áreas de ponderação (conjunto de setores censitários) do município de São Paulo e utiliza os microdados do Censo Demográfico 2000 em conjunto com a base de domicílios da AES Eletropaulo. Aplica modelos de Spatial Auto-Regression (SAR), Geographically Weighted Regression (GWR), e um modelo inédito combinado (GWR+SAR), desenvolvido neste estudo. Diversas matrizes de vizinhança foram utilizadas na avaliação da influência espacial (com padrão Centro-Periferia) das variáveis em estudo. As variáveis mostraram forte auto-correlação espacial (I de Moran superior a 58% para o Consumo de Energia Elétrica e superior a 75% para a Renda Domiciliar). As relações entre Renda e Consumo de Energia Elétrica mostraram-se muito fortes (os coeficientes de explicação da Renda atingiram valores de 0,93 a 0,98). No segundo nível, domiciliar, utiliza dados coletados na Pesquisa Anual de Satisfação do Cliente Residencial, coordenada pela Associação Brasileira dos Distribuidores de Energia Elétrica (ABRADEE), para os anos de 2004, 2006, 2007, 2008 e 2009. Foram aplicados os modelos Weighted Linear Model (WLM), GWR e SAR para os dados das pesquisas com as entrevistas alocadas no centróide e na sede dos distritos. Para o ano de 2009, foram obtidas as localizações reais dos domicílios entrevistados. Adicionalmente, foram desenvolvidos 6 algoritmos de distribuição de pontos no interior dos polígonos dos distritos. Os resultados dos modelos baseados em centróides e sedes obtiveram um coeficiente de determinação R2 em torno de 0,45 para a técnica GWR, enquanto os modelos baseados no espalhamento de pontos no interior dos polígonos dos distritos reduziram essa explicação para cerca de 0,40. Esses resultados sugerem que os algoritmos de alocação de pontos em polígonos permitem a observação de uma associação mais realística entre os construtos analisados. O uso combinado dos achados demonstra que as informações de faturamento das distribuidoras de energia elétrica têm grande potencial para apoiar decisões estratégicas. Por serem atuais, disponíveis e de atualização mensal, os indicadores socioeconômicos baseados em consumo de energia elétrica podem ser de grande utilidade como subsídio a processos de classificação, concentração e previsão da renda domiciliar.