967 resultados para explicit categorization
Resumo:
Dissertação de Mestrado apresentada no Instituto Superior de Psicologia Aplicada para obtenção do grau de Mestre na especialidade de Psicologia Clínica.
Resumo:
Chagas disease (ChD), a neglected tropical disease caused by infection with the parasite Trypanosoma cruzi (T. cruzi), remains a serious public health issue in Latin America and is an emerging disease in several non-endemic countries, where knowledge of the condition and experience with its clinical management are limited. Regionally, the disease is the major cause of disability secondary to tropical diseases in young adults. Health-related quality of life (HRQoL) impairment is common in patients with ChD, especially in those with Chagas dilated cardiomyopathy, the most severe manifestation of the disease, which frequently leads to heart failure. The aim of this review was to conduct a literature search for studies that have evaluated the determining factors of HRQoL in ChD patients. We included cross-sectional, case-control, cohort, and experimental studies, as well as clinical trials that evaluated the HRQoL in ChD patients aged 18 to 60 years and are presenting an explicit description of statistical analysis. Using a combination of keywords based on Descriptors in Health Sciences (DeCS) and Medical Subject Headings (MeSH) for searches in PubMed and the Scientific Electronic Library Online (SciELO), 148 studies were found. After exclusions, 12 studies were selected for analysis. Three main findings were extracted from these studies: 1) cardiac involvement is associated with a worse HRQoL in ChD patients; 2) HRQoL is associated with the patients' functional capacity; and 3) simple and inexpensive therapeutic measures are effective for improving HRQoL in ChD patients. Hence, ChD patients' functional capacity, the effectiveness of non-surgical conservative treatment, and cardiac involvement are important determining factors for the HRQoL in ChD patients.
Resumo:
We intend to study the algebraic structure of the simple orthogonal models to use them, through binary operations as building blocks in the construction of more complex orthogonal models. We start by presenting some matrix results considering Commutative Jordan Algebras of symmetric matrices, CJAs. Next, we use these results to study the algebraic structure of orthogonal models, obtained by crossing and nesting simpler ones. Then, we study the normal models with OBS, which can also be orthogonal models. We intend to study normal models with OBS (Orthogonal Block Structure), NOBS (Normal Orthogonal Block Structure), obtaining condition for having complete and suffcient statistics, having UMVUE, is unbiased estimators with minimal covariance matrices whatever the variance components. Lastly, see ([Pereira et al. (2014)]), we study the algebraic structure of orthogonal models, mixed models whose variance covariance matrices are all positive semi definite, linear combinations of known orthogonal pairwise orthogonal projection matrices, OPOPM, and whose least square estimators, LSE, of estimable vectors are best linear unbiased estimator, BLUE, whatever the variance components, so they are uniformly BLUE, UBLUE. From the results of the algebraic structure we will get explicit expressions for the LSE of these models.
Resumo:
The stylistic categorization of the Estado Novo has been intensely discussed by Portuguese art historians. The square Alameda Dom Afonso Henriques in Lisbon (Alameda) can be seen as paradigmatic for the architecture of power of the Estado Novo. The Alameda forms a gardened valley between two hills. There you find two prominent and highly propagandist buildings: The Instituto Superior Técnico (IST) and the Fonte Luminosa are dedicated to modern sciences and respectively to the harmonious contribution of nature to the city. The iconography of the Alameda as well as its incorporation into the propagandist use of urban planning in the 1930s and 1940s exemplify the visual politics during Salazarism. Urban planning programs intended to create cities that would preserve the character of a traditional catholic society and at the same time answer to the need to modernize the country and evoke the image of a progressive state. Thus, public buildings and urban squares such as the Alameda contributed to design a corporate image and to the ‘spirit’ of the regime.
Resumo:
RESUMO - A frequente insuficiência de informação e até, eventualmente, a presença de elementos cientificamente pouco robustos (ou mesmo hipotéticos) no procedimento de obtenção dos resultados finais (scores) com os diversos métodos de avaliação do risco, julga-se determinar a obtenção de distintos resultados no mesmo posto de trabalho e que interessam analisar. O presente estudo foi efectuado numa empresa da indústria automóvel e pretendeu contribuir para a efectividade do processo de avaliação do risco destas lesões em meio industrial. Utilizaram-se como ponto de partida as classificações de risco em postos de trabalho onde a aplicação do método OCRA — base do projecto de norma Europeu prEN 1005-5 para a estimativa do risco de LMEMSLT (Lesões Musculoesqueléticas do Membro Superior Ligadas ao Trabalho) — identificou níveis de risco moderados e/ou elevados (score OCRA ≥ 16,5). Assim nos postos de trabalho (n = 71) registou-se em vídeo a actividade de trabalho. Analisaram-se os principais factores de risco (postura, força, repetitividade e exposição a vibrações) com uma amostragem de segundo em segundo e aplicaram-se dois métodos: 1) RULA (McAtamney; Corlett, 1993); 2) SI (Moore; Garg, 1995). Dos resultados globais da aplicação dos métodos identificam- se discrepâncias evidentes: o método SI classificou 41 postos de risco elevado e o método RULA classificou apenas 26 postos de risco. Destaque para as divergências entre os postos classificados de risco elevado como, por exemplo: de entre os 41 postos com scores de risco da aplicação do método SI apenas se encontram 12 postos classificados de risco pelo método RULA. Os resultados permitem evidenciar validades preditivas diversas para os factores de risco analisados: 1) situações de aplicação de força (SI = 0,80; RULA = 0,66); 2) presença de posturas extremas (SI = 0,68; RULA = 0,48); 3) repetitividade (SI = 0,35; RULA = 0,43). Conclui-se pela divergência de resultados dos métodos SI e RULA aplicados nos mesmos postos de trabalho que tal situação alerta para a pertinência da utilização de um filtro que permita a identificação dos factores de risco presentes em cada posto de trabalho e que, por consequência, oriente a selecção do método mais indicado ou ainda, em oposição, do método contra-indicado. Este trabalho, como um contributo para uma efectiva identificação e avaliação do risco de LMEMSLT, conduz, no limite, à necessidade de elaboração de uma «grelha» das «grelhas» e de informação mais precisa sobre os métodos e sua aplicação, permitindo, desse modo, uma mais efectiva gestão do risco destas lesões.
Resumo:
Relationships between accuracy and speed of decision-making, or speed-accuracy tradeoffs (SAT), have been extensively studied. However, the range of SAT observed varies widely across studies for reasons that are unclear. Several explanations have been proposed, including motivation or incentive for speed vs. accuracy, species and modality but none of these hypotheses has been directly tested. An alternative explanation is that the different degrees of SAT are related to the nature of the task being performed. Here, we addressed this problem by comparing SAT in two odor-guided decision tasks that were identical except for the nature of the task uncertainty: an odor mixture categorization task, where the distinguishing information is reduced by making the stimuli more similar to each other; and an odor identification task in which the information is reduced by lowering the intensity over a range of three log steps. (...)
Resumo:
Relatório de estágio de mestrado em Educação Pré-Escolar e Ensino do 1.º Ciclo do Ensino Básico
Resumo:
This work proposes a constitutive model to simulate nonlinear behaviour of cement based materials subjected to different loading paths. The model incorporates a multidirectional fixed smeared crack approach to simulate crack initiation and propagation, whereas the inelastic behaviour of material between cracks is treated by a numerical strategy that combines plasticity and damage theories. For capturing more realistically the shear stress transfer between the crack surfaces, a softening diagram is assumed for modelling the crack shear stress versus crack shear strain. The plastic damage model is based on the yield function, flow rule and evolution law for hardening variable, and includes an explicit isotropic damage law to simulate the stiffness degradation and the softening behaviour of cement based materials in compression. This model was implemented into the FEMIX computer program, and experimental tests at material scale were simulated to appraise the predictive performance of this constitutive model. The applicability of the model for simulating the behaviour of reinforced concrete shear wall panels submitted to biaxial loading conditions, and RC beams failing in shear is investigated.
Resumo:
This work intends to present a newly developed test setup for dynamic out-of-plane loading using underWater Blast Wave Generators (WBWG) as loading source. Underwater blasting operations have been, during the last decades, subject of research and development of maritime blasting operations (including torpedo studies), aquarium tests for the measurement of blasting energy of industrial explosives and confined underwater blast wave generators. WBWG allow a wide range for the produced blast impulse and surface area distribution. It also avoids the generation of high velocity fragments and reduces atmospheric sound wave. A first objective of this work is to study the behavior of masonry infill walls subjected to blast loading. Three different masonry walls are to be studied, namely unreinforced masonry infill walls and two different reinforcement solutions. These solutions have been studied previously for seismic action mitigation. Subsequently, the walls will be simulated using an explicit finite element code for validation and parametric studies. Finally, a tool to help designers to make informed decisions on the use of infills under blast loading will be presented.
Resumo:
The present paper focuses on a damage identification method based on the use of the second order spectral properties of the nodal response processes. The explicit dependence on the frequency content of the outputs power spectral densities makes them suitable for damage detection and localization. The well-known case study of the Z24 Bridge in Switzerland is chosen to apply and further investigate this technique with the aim of validating its reliability. Numerical simulations of the dynamic response of the structure subjected to different types of excitation are carried out to assess the variability of the spectrum-driven method with respect to both type and position of the excitation sources. The simulated data obtained from random vibrations, impulse, ramp and shaking forces, allowed to build the power spectrum matrix from which the main eigenparameters of reference and damage scenarios are extracted. Afterwards, complex eigenvectors and real eigenvalues are properly weighed and combined and a damage index based on the difference between spectral modes is computed to pinpoint the damage. Finally, a group of vibration-based damage identification methods are selected from the literature to compare the results obtained and to evaluate the performance of the spectral index.
Resumo:
Tese de Doutoramento em Ciências da Educação - Especialidade de Desenvolvimento Curricular
Resumo:
Tese de Doutoramento em Ciências da Literatura - Especialidade em Teoria da Literatura
Resumo:
Tese de Doutoramento em Estudos da Criança (área de especialização em Educação Musical).
Resumo:
Dissertação de mestrado em Engenharia Industrial
Resumo:
Over the past four decades the EU cohesion policy’s focus, objectives and content have experienced significant changes as a result of successive reforms aiming at adapting it to a Union in constant evolution. In the early stages, cohesion policy had eminently redistributive goals and it assumed an explicit spatial dimension. In the late nineties, the possibility of an extension towards Eastern European countries and the limited willingness of net contributors to increase funding led to a turning point in cohesion policy. The increased importance of economic growth and job creation in the 2000’s, within the cohesion policy’s context, has led to a misrepresentation of its essence and motivations. Cohesion was losing importance towards competitiveness and regional equity towards national efficiency. Today, cohesion policy is for many EU countries the main mean for mobilising investment in a context of budgetary constraints and credit rationing. In light of the available evidence, it is likely that the overall design and priorities of the current cohesion policy have a limited impact in terms of convergence in many EU regions, especially in the less developed regions. This paper’s main objectives are to analyse the evolution of European cohesion policy throughout its history, to present a picture of cohesion policy in the 2014-2020 programming period and to discuss the main problems associated with its design, priorities and programming model.