Desenvolvimento de sistema magnético polimérico contendo antimicrobianos para tratamento de infecções por Helicobacter pylori

Helicobacter pylori is the main cause of gastritis, gastroduodenal ulcer disease and gastric cancer. The most recommended treatment for eradication of this bacteria often leads to side effects and patient poor compliance, which induce treatment failure. Magnetic drug targeting is a very efficient method that overcomes these drawbacks through association of the drug with a magnetic compound. Such approach may allow such systems to be placed slowed down to a specific target area by an external magnetic field. This work reports a study of the synthesis and characterization of polymeric magnetic particles loaded with the currently used antimicrobial agents for the treatment of Helicobacter pylori infections, aiming the production of magnetic drug delivery system by oral route. Optical microscopy, scanning electron microscopy, transmission electron microscopy, x-ray powder diffraction, nitrogen adsorption/desorption isotherms and vibrating sample magnetometry revealed that the magnetite particles, produced by the co-precipitation method, consisted of a large number of aggregated nanometer-size crystallites (about 6 nm), creating superparamagnetic micrometer with high magnetic susceptibility particles with an average diameter of 6.8 ± 0.2 μm. Also, the polymeric magnetic particles produced by spray drying had a core-shell structure based on magnetite microparticles, amoxicillin and clarithromycin and coated with Eudragit® S100. The system presented an average diameter of 14.2 ± 0.2 μm. The amount of magnetite present in the system may be tailored by suitably controlling the suspension used to feed the spray dryer. In the present work it was 2.9% (w/w). The magnetic system produced may prove to be very promising for eradication of Helicobacter pylori infections

Desenvolvimento territorial no Rio Grande do Norte: uma identificação de clusters rurais

The general objective of this study is the identification of rural spaces in Rio Grande do Norte through a territorial approach. It looks if there is spatial correlations between municipalities that influence and are influenced by the rural environment, allowing the identification of clusters. To accomplish this objective it`s used, in the methodology, the factor analysis of principal components to achieve the indicators of rurality and territorial development, that deal with four dimensions of analysis: environmental, political-institutional, economical and spatial. Moreover, to identify the spatial correlations structure between municipalities it used the Moran index to both rurality and territorial development, leading to clustering identification. The results show that the rurality is present in most of Rio Grande do Norte municipalities, except in cases like Mossoró, Pau dos Ferros, Caicó and Natal, where can be regional dynamic poles. It is also verified that the more rural municipalities tend to be less developed, according to the territorial development index, and have less correlations with neighboring municipalities

Síntese e caracterização de pós Ba(x)Sr(1-x)Co0,8Fe0,2O3- através do método de coprecipitação via oxalato

Ceramic powders based on oxides of perovskite-type structure is of fundamental interest nowadays, since they have important ionic-electronic conductivity in the use of materials with technological applications such as gas sensors, oxygen permeation membranes, catalysts and electrolytes for solid oxide fuel cells (SOFC). The main objective of the project is to develop nanostructured ceramic compounds quaternary-based oxide Barium (Br), Strontium (Sr), Cobalt (Co) and Iron (Fe). In this project were synthesized compounds BaxSr(1-x)Co0, 8Fe0,2O3- (x = 0.2, 0.5 and 0.8) through the oxalate co-precipitation method. The synthesized powders were characterized by thermogravimetric analysis and differential thermal analysis (TGADTA), X-ray diffraction (XRD) with the Rietveld refinement using the software MAUD and scanning electron microscopy (SEM). The results showed that the synthesis technique used was suitable for production of nanostructured ceramic solid solutions. The powders obtained had a crystalline phase with perovskite-type structure. The TGA-DTA results showed that the homogeneous phase of interest was obtained temperature above 1034°C. It was also observed that the heating rate of the calcination process did not affect the elimination of impurities present in the ceramic powder. The variation in the addition of barium dopant promoted changes in the average crystallite size in the nanometer range, the composition being BSCF(5582) obtained the lowest value (179.0nm). The results obtained by oxalate co-precipitation method were compared with those synthesis methods in solid state and EDTA-citrate method

Desenvolvimento de uma rota química alternativa de síntese de SrCo0,8Fe0,2O3- e LaNi0,3Co0,7O3- para aplicação na reação de oxidação do CO

This thesis focuses on the coprecipitation synthesis method for preparation of ceramic materials with perovskite structure, their characterization and application as catalytic material in the reaction of converting CO to CO2 developing a methodological alternative route of synthesis from the middle via oxalate coprecipitation material SrCo0,8Fe0,2O3-d. In order to check the influence of this method, it was also synthesized using a combined citrate - EDTA complexing method. The material was characterized by: X-ray diffraction (XRD), Rietveld refinement method, thermogravimetry and differential thermo analysis (TG / DTA), scanning (SEM) and transmission (TEM) electron microscopy, particle size distribution and surface analysis method BET. Both methods led to post-phase synthesis, with pH as a relevant parameter. The synthesis based on the method via oxalate coprecipitation among particles led to the crystalline phase as those obtained using a combined citrate - EDTA complexing method under the same conditions of heat treatment. The nature of the reagent used via oxalate coprecipitation method produced a material with approximately 80 % lower than the average size of crystallites. Moreover, the via oxalate coprecipitation method precursors obtained in the solid state at low temperature (~ 26 oC), shorter synthesis, greater thermal stability and a higher yield of around 90-95 %, maintaining the same order of magnitude the crystallite size that the combined citrate - EDTA complexing method. For purposes of comparing the catalytic properties of the material was also synthesized by the using a combined citrate - EDTA complexing method. The evaluation of catalytic materials SrCo0,8Fe0,2O3-d LaNi0,3Co0,7O3-d was accompanied on the oxidation of CO to CO2 using a stainless steel tubular reactor in the temperature range of 75-300 oC. The conversion CO gas was evaluated in both materials on the results shaved that the firm conversion was loves for the material LaNi0,3Co0,7O3-d

Ecologia humana e manejo participativo da pesca do búzio Anomalocardia brasiliana (Gmelin, 1791) (Bivalvia: Veneridae) na Reserva de Desenvolvimento Sustentável Estadual Ponta do Tubarão (RN)

Coastal and marine protected areas are created to protect habitat, avoid biodiversity loss, and to help maintain viable fisheries. However, most of these areas in tropical countries occurs in impoverished regions and directly affect the livelihood and survival of coastal communities which directly depend on fisheries and shellfisheries. Therefore, socioeconomic and conservation goals overlap. In this context, fishers should have a central place in resource management. They are critical resource users and their behavior directly affects the system. Shellfish resources are important sources of food, employment and income to fishing communities in Latin America. But despite its widespread use for food and income, there is an urgent need of more research on shellfish management. This research discusses the artisanal fisheries of Venus clam (Anomalocardia brasiliana) (Gmelin, 1791) (Bivalvia: Veneridae) in Brazil, and points out strategies to improve the system. Venus clam is a small and commonly exploited species for food and income on the Brazilian coast. This research was carried out at Ponta do Tubarão Sustainable Development Reserve (Brazilian Northeast coast), where there was no information available about who harvest, where or how much Venus clam has been harvested, despite this resource being exploited for generations. Clam fishery follows the pattern of socio-economic invisibility that general clam exploitation has in Brazil. Methods used were interviews, participatory monitoring and focal follow observation from January 2010 to May 2011. Results include: (a) the identification of shell fishers, (b) how harvest and meat processing are performed (mollusk beds, time spent, gross and net production), (c) the analisis of shell fisher income and their economic sustentability, and (d) the involvement of shell fisher families in data gathering and analyses for the first time. Based on the acquired knowledge, we propose a new institutional arrangement for clam fishery including co-management, fisheries agreement, compensatory arrangements and improvements for the Venus clam value chain such as the establishment of a minimum price for clam meat. This research also includes two other results: a general description for Venus clam harvesting in the Brazilian Northeast coast and a specific discussion about co-management of Venus clam in Brazil. The first one was possible through the meeting of several shell fisherwomen from other states during activities promoted by People of the Tides (PoT) project. PoT was an international initiative aiming to develop coastal communities that depend on mollusk for their livelihood. The second one is a comparison between PoT and Venus clam management at Pirajubaé Marine Extractive Reserve (Santa Catarina). It evaluates the success and failures of these only two initiatives involving co-management of A. brasiliana in Brazil

A utilização da modelagem física no estudo do desenvolvimento, geometria e cinemática de falhas distensionais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Modelagem e desenvolvimento de um banco de dados geográficos : aplicação à elaboração de mapas de sensibilidade ambiental ao derramamento de óleo na área costeira entre galinhos e São Bento do Norte-RN

The area between Galinhos and São Bento do Norte beaches, located in the northern coast of the Rio Grande do Norte State is submitted to intense and constant processes of littoral and aeolian transport, causing erosion, alterations in the sediments balance and modifications in the shoreline. Beyond these natural factors, the human interference is huge in the surroundings due to the Guamaré Petroliferous Pole nearby, the greater terrestrial oil producing in Brazil. Before all these characteristics had been organized MAMBMARE and MARPETRO projects with the main objective to execute the geo-environmental monitoring of coastal areas on the northern portion of RN. There is a bulky amount of database from the study area such as geologic and geophysical multitemporal data, hydrodynamic measurements, remote sensing multitemporal images, thematic maps, among others; it is of extreme importance to elaborate a Geographic Database (GD), one of the main components of a Geographic Information System (GIS), to store this amount of information, allowing the access to researchers and users. The first part of this work consisted to elaborate a GD to store the data of the area between Galinhos and São Bento do Norte cities. The main goal was to use the potentiality of the GIS as a tool to support decisions in the environmental monitoring of this region, a valuable target for oil exploration, salt companies and shrimp farms. The collected data was stored as a virtual library to assist men decisions from the results presented as digital thematic maps, tables and reports, useful as source of data in the preventive planning and as guidelines to the future research themes both on regional and local context. The second stage of this work consisted on elaborate the Oil-Spill Environmental Sensitivity Maps. These maps based on the Environmental Sensitivity Index Maps to Oil Spill developed by the Ministry of Environment are cartographic products that supply full information to the decision making, contingency planning and assessment in case of an oil spilling incident in any area. They represent the sensitivity of the areas related to oil spilling, through basic data such as geology, geomorphology, oceanographic, social-economic and biology. Some parameters, as hydrodynamic data, sampling data, coastal type, declivity of the beach face, types of resources in risk (biologic, economic, human or cultural) and the land use of the area are some of the essential information used on the environmental sensitivity maps elaboration. Thus using the available data were possible to develop sensitivity maps of the study area on different dates (June/2000 and December/2000) and to perceive that there was a difference on the sensitivity index generated. The area on December presented more sensible to the oil than the June one because hydrodynamic data (wave and tide energy) allowed a faster natural cleaning on June. The use of the GIS on sensitivity maps showed to be a powerful tool, since it was possible to manipulate geographic data with correctness and to elaborate more accurate maps with a higher level of detail to the study area. This presented an medium index (3 to 4) to the long shore and a high index (10) to the mangrove areas highly vulnerable to oil spill

Desenvolvimento de dobras e falhas em ambiente distensional: Aplicação da modelagem física

The geological modeling allows, at laboratory scaling, the simulation of the geometric and kinematic evolution of geological structures. The importance of the knowledge of these structures grows when we consider their role in the creation of traps or conduits to oil and water. In the present work we simulated the formation of folds and faults in extensional environment, through physical and numerical modeling, using a sandbox apparatus and MOVE2010 software. The physical modeling of structures developed in the hangingwall of a listric fault, showed the formation of active and inactive axial zones. In consonance with the literature, we verified the formation of a rollover between these two axial zones. The crestal collapse of the anticline formed grabens, limited by secondary faults, perpendicular to the extension, with a curvilinear aspect. Adjacent to these faults we registered the formation of transversal folds, parallel to the extension, characterized by a syncline in the fault hangingwall. We also observed drag folds near the faults surfaces, these faults are parallel to the fault surface and presented an anticline in the footwall and a syncline hangingwall. To observe the influence of geometrical variations (dip and width) in the flat of a flat-ramp fault, we made two experimental series, being the first with the flat varying in dip and width and the second maintaining the flat variation in width but horizontal. These experiments developed secondary faults, perpendicular to the extension, that were grouped in three sets: i) antithetic faults with a curvilinear geometry and synthetic faults, with a more rectilinear geometry, both nucleated in the base of sedimentary pile. The normal antithetic faults can rotate, during the extension, presenting a pseudo-inverse kinematics. ii) Faults nucleated at the top of the sedimentary pile. The propagation of these faults is made through coalescence of segments, originating, sometimes, the formation of relay ramps. iii) Reverse faults, are nucleated in the flat-ramp interface. Comparing the two models we verified that the dip of the flat favors a differentiated nucleation of the faults at the two extremities of the mater fault. V These two flat-ramp models also generated an anticline-syncline pair, drag and transversal folds. The anticline was formed above the flat being sub-parallel to the master fault plane, while the syncline was formed in more distal areas of the fault. Due the geometrical variation of these two folds we can define three structural domains. Using the physical experiments as a template, we also made numerical modeling experiments, with flat-ramp faults presenting variation in the flat. Secondary antithetic, synthetic and reverse faults were generated in both models. The numerical modeling formed two folds, and anticline above the flat and a syncline further away of the master fault. The geometric variation of these two folds allowed the definition of three structural domains parallel to the extension. These data reinforce the physical models. The comparisons between natural data of a flat-ramp fault in the Potiguar basin with the data of physical and numerical simulations, showed that, in both cases, the variation of the geometry of the flat produces, variation in the hangingwall geometry

Desenvolvimento de um sistema computacional para geração automática de mapas de vulnerabilidade como ferramenta de auxílio às ações de prevenção ao derramamento de óleo em áreas costeiras

The northern portion of the Rio Grande do Norte State is characterized by intense coastal dynamics affecting areas with ecosystems of moderate to high environmental sensitivity. In this region are installed the main socioeconomic activities of RN State: salt industry, shrimp farm, fruit industry and oil industry. The oil industry suffers the effects of coastal dynamic action promoting problems such as erosion and exposure of wells and pipelines along the shore. Thus came the improvement of such modifications, in search of understanding of the changes which causes environmental impacts with the purpose of detecting and assessing areas with greater vulnerability to variations. Coastal areas under influence oil industry are highly vulnerable and sensitive in case of accidents involving oil spill in the vicinity. Therefore, it was established the geoenvironmental monitoring of the region with the aim of evaluating the entire coastal area evolution and check the sensitivity of the site on the presence of oil. The goal of this work was the implementation of a computer system that combines the needs of insertion and visualization of thematic maps for the generation of Environmental Vulnerability maps, using techniques of Business Intelligence (BI), from vector information previously stored in the database. The fundamental design interest was to implement a more scalable system that meets the diverse fields of study and make the appropriate system for generating online vulnerability maps, automating the methodology so as to facilitate data manipulation and fast results in cases of real time operational decision-making. In database development a geographic area was established the conceptual model of the selected data and Web system was done using the template database PostgreSQL, PostGis spatial extension, Glassfish Web server and the viewer maps Web environment, the GeoServer. To develop a geographic database it was necessary to generate the conceptual model of the selected data and the Web system development was done using the PostgreSQL database system, its spatial extension PostGIS, the web server Glassfish and GeoServer to display maps in Web

Desenvolvimento territorial e a política nacional de água em Moçambique: o caso do distrito de Chibuto

The development has been a phenomenon in constant discussion today, whose fundamental importance should be to promote the welfare of humanity. Thus, the development becomes an element that adds political, economic, social and environmental values . In Mozambique the development model adopted by the State prioritizes the economic dimension, in this case favoring the growth of capitalist structure production. Thus , the basic conditions for human survival still leaves much to be desired and the Mozambican population in general and the district of Chibuto , in particular , continue to face several difficulties to have access to such conditions, and the lack of potable water is a that most of the problems afflicting this population . The water was always a factor related to the socio-economic development of the population, where great civilizations and major economic marks were always influenced by water availability, and today this feature is present in all sectors of production. In Mozambique, much effort has been made by the government, national and international organizations to enhance and guarantee the supply of potable and drinking water, and despite all this effort, most of the population does not have access to this precious resource. In this sense, this work presents an analysis of the effects of the National Water Policy in the study area, analyzes the shortage of potable water in the district of Chibuto, discusses the design and development contained in the official discourse of the state and, opposes the idea of human development. For such issues that help to understand the phenomenon under study, such as territory, public policy and criticism of hegemonic conception of development are addressed. To make the desired approach, we performed a characterization of the District of Chibuto, addressing the issue of poverty, with a brief discussion of this concept, from different approaches, and analyze the impact of the PARPA (Action Plan for the Reduction of Absolute Poverty) in fighting poverty in Mozambique, and became a description of the scenario of poverty and vulnerability in Chibuto district with the construction of Territorial Human Development Index. Research also brings up a discussion about territory and technicization which describes the senary of the water supply system in the District and territorial dynamics of Chibuto, from the analysis and description of existing structures and other technical objects that structure the territory under study. Thus, it was found that the development should be summarized in the satisfaction of human needs, and should be the cornerstone of the new type of development that is intended for the purpose of triggering urgently actions to overcome or combat bleak misery suffered by the majority of inhabitants of the District of Chibuto

Síndrome pós-laqueadura: repercussões clínicas e psíquicas da pós-laqueadura

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Preditores Clínicos e Histopatológicos de Tumor Trofoblástico Gestacional pós-Mola Hidatiforme Completa

Objetivo: definir os preditores clínicos e histopatológicos mais eficientes da evolução da mola hidatiforme completa (MHC) para tumor trofoblástico gestacional (TTG). Métodos: estudo prospectivo clínico e histopatológico de todas as portadoras de MHC, atendidas entre 1990 e 1998 no Hospital das Clínicas de Botucatu -- UNESP. A avaliação clínica pré-esvaziamento molar classificou a gravidez molar em: MHC de alto risco e MHC de baixo risco. Foram analisados os preditores clínicos para TTG, estabelecidos por Goldstein et al.¹ e por outros autores2--10. A avaliação histopatológica incluiu a determinação do diagnóstico de MHC, segundo os critérios de Szulman e Surti11, e o reconhecimento dos fatores de risco para TTG, de Ayhan et al.8. Os preditores clínicos e histopatológicos foram correlacionados com o desenvolvimento de TTG pós-molar. Resultados: em 65 portadoras de MHC, cistos do ovário maiores que 6 cm e tamanho uterino maior que 16 cm foram os preditores clínicos mais eficientes de TTG. A proliferação trofoblástica, a atipia nuclear, a necrose/hemorragia, a maturação trofoblástica e a relação cito/sinciciotrofoblasto não foram preditores significativos para TTG. A correlação entre preditor clínico e histopatológico para o desenvolvimento de TTG não foi possível porque nenhum parâmetro histopatológico foi significativo. Conclusões: mais estudos são necessários para avaliar possíveis preditores de persistência (TTG) e sua aplicação no contexto clínico das MHC. Enquanto isso, a determinação seriada de hCG sérico permanece o único indicador prognóstico seguro para TTG pós-MHC.

Efeito da frequência de amamentação sobre a taxa de ovulação após tratamento com desmame temporário + GnRH, sobre a incidência de luteólise prematura no primeiro ciclo estral pós-parto e sobre o desempenho da progênie de vacas Nelore

Avaliou-se o efeito da restrição na frequência de amamentação sobre o diâmetro folicular no dia 0 (DFOL), sobre a taxa de ovulação (TO), e sobre a incidência de luteólise prematura no primeiro ciclo estral pós-parto (ILP) de vacas Nelore multíparas, em anestro, submetidas à amamentação ad libitum (controle; n= 115) ou amamentação uma vez ao dia (restrito; n= 109), entre os dias -14 e 9 do experimento, e estudou-se o efeito desses tratamentos sobre o peso à desmama da progênie dessas vacas. Induziu-se ovulação com remoção de bezerros entre os dias -2 e 0 e aplicação de 100μg de GnRH no dia 0. Somente animais que ovularam foram mantidos no experimento (n= 125). A ocorrência de luteólise prematura foi avaliada por meio da dosagem da concentração sérica de progesterona nos dias 5 e 9. A TO não foi influenciada pelos tratamentos (55,8%; P>0,1), e as vacas do tratamento restrito apresentaram maior DFOL (10,90±0,26 vs. 10,18±0,21mm; P<0,05) e menor ILP (21,4% vs. 43,5%; P<0,05). Os bezerros do tratamento controle foram mais pesados (162,32±2,08 vs. 155,91±4,12kg; P<0,05). Conclui-se que a restrição na frequência de amamentação em vacas Nelore reduz a ILP, porém com possível efeito negativo no desenvolvimento dos bezerros.

Respostas pressóricas pós-exercícios com pesos executados em diferentes sobrecargas por mulheres normotensas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito do tipo de substrato para pupação na dispersão larval pós-alimentar de Chrysomya albiceps (Diptera, Calliphoridae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)