Separation of satured and unsaturated fatty acids from palm fatty acids distillates in continuous multistage countercurrent columns with supercritical carbon dioxide as solvent: a process design methodology

In this work the separation of multicomponent mixtures in counter-current columns with supercritical carbon dioxide has been investigated using a process design methodology. First the separation task must be defined, then phase equilibria experiments are carried out, and the data obtained are correlated with thermodynamic models or empirical functions. Mutual solubilities, Ki-values, and separation factors aij are determined. Based on this data possible operating conditions for further extraction experiments can be determined. Separation analysis using graphical methods are performed to optimize the process parameters. Hydrodynamic experiments are carried out to determine the flow capacity diagram. Extraction experiments in laboratory scale are planned and carried out in order to determine HETP values, to validate the simulation results, and to provide new materials for additional phase equilibria experiments, needed to determine the dependence of separation factors on concetration. Numerical simulation of the separation process and auxiliary systems is carried out to optimize the number of stages, solvent-to-feed ratio, product purity, yield, and energy consumption. Scale-up and cost analysis close the process design. The separation of palmitic acid and (oleic+linoleic) acids from PFAD-Palm Fatty Acids Distillates was used as a case study.

Green markov - uma abordagem híbrida de política markoviana e simulação discreta para planejamento de alocação de usuários em redes macro-femto

O uso da comunicação de voz e dados através de dispositivos móveis vem aumentando significativamente nos últimos anos. Tal expansão traz algumas dificuldades inerentes, tais como: ampliação constante de capacidade das redes e eficiência energética. Neste contexto, vem se consolidando o conceito de Green networks, que se concentra no esforço para economia de energia e redução de CO2. Neste sentido, este trabalho propõe validar um modelo de uma política baseado em processo markoviano de decisão, visando a otimizar o consumo de energia, QoS e QoE, na alocação de usuários em redes macrocell e femtocell. Para isso o modelo foi inserido no simulador NS-2, aliando a solução analítica markoviana à flexibilidade característica da simulação discreta. A partir dos resultados apresentados na simulação, a política obteve uma economia significativa no consumo energético, melhorando a eficiência energética em até 4%, além de melhorar a qualidade de serviço em relação às redes macrocell e femtocell, demonstrando-se eficaz, de modo a alterar diretamente as métricas de QoS e de QoE.

Application of continuous positive airway pressure in the delivery room: a multicenter randomized clinical trial

This study evaluated whether the use of continuous positive airway pressure (CPAP) in the delivery room alters the need for mechanical ventilation and surfactant during the first 5 days of life and modifies the incidence of respiratory morbidity and mortality during the hospital stay. The study was a multicenter randomized clinical trial conducted in five public university hospitals in Brazil, from June 2008 to December 2009. Participants were 197 infants with birth weight of 1000-1500 g and without major birth defects. They were treated according to the guidelines of the American Academy of Pediatrics (APP). Infants not intubated or extubated less than 15 min after birth were randomized for two treatments, routine or CPAP, and were followed until hospital discharge. The routine (n=99) and CPAP (n=98) infants studied presented no statistically significant differences regarding birth characteristics, complications during the prenatal period, the need for mechanical ventilation during the first 5 days of life (19.2 vs 23.4%, P=0.50), use of surfactant (18.2 vs 17.3% P=0.92), or respiratory morbidity and mortality until discharge. The CPAP group required a greater number of doses of surfactant (1.5 vs 1.0, P=0.02). When CPAP was applied to the routine group, it was installed within a median time of 30 min. We found that CPAP applied less than 15 min after birth was not able to reduce the need for ventilator support and was associated with a higher number of doses of surfactant when compared to CPAP applied as clinically indicated within a median time of 30 min.

Effects of continuous rate infusion of butorphanol in isoflurane-anesthetized calves

PURPOSE:To assess the hemodynamic changes and bispectral index (BIS) following administration of a continuous rate infusion (CRI) of butorphanol in isoflurane-anesthetized calves.METHODS: Eight calves weighing 110 ± 12 kg were included in the study. Anesthesia was induced with 5% isoflurane in O2 delivered via face mask and maintained with end-tidal concentration of 1.4%. IPPV was set to a peak inspiratory airway pressure of 15 cmH2O and respiratory rate of six breaths minute-1. Forty minutes after the start of anesthetic maintenance, 0.1 mg kg-1butorphanol was administered intravenously, followed by a CRI of 20 µg kg-1 minute-1. Hemodynamic variables and BIS were recorded before butorphanol administration (T0), and at 10, 20, 40 and 80 minutes following the CRI. Anesthesia was discontinued after the last recording and the calves were allowed to recover. The time to sternal recumbency (SRE) and standing (ST) were evaluated.RESULTS: There were no significant differences between the moments in all hemodynamic variables and BIS. The time to SRE and ST was 9 ± 5 and 14 ± 7 minutes, respectively.CONCLUSION: The continuous rate infusion did not produce clinically relevant changes in hemodynamic or bispectral index values compared to baseline in mechanically ventilated and unstimulated calves anesthetized at 1.4% isoflurane.

Production of sheep grazing on nitrogen-fertilized tifton 85 grass in continuous stocking

Biomass and forage volume density and the performance and stocking rate of sheep on pastures with nitrogen-fertilized Tifton 85 and subjected to a continuous stocking system were evaluated. Four doses of nitrogen (0, 100, 200, and 400 kg ha-1 year), arranged in an experimental design with randomized blocks and four replications, were analyzed. Sixteen paddocks and Santa Inês sheep were used as test animals, coupled to crossbreed Santa Inês sheep as regulating animal stocking. Nitrogen-fertilized Tifton 85 pastures increased the amount of forage biomass and volume density which affected stocking rate and weight gain of sheep in continuous grazing. When pastures with Tifton 85 were administered in variable load continuous stocking, with grass kept at 15 cm, nitrogen fertilization up to 400 kg ha-1 year is recommended.

Continuous vs. segmented second-dimension system gradients for comprehensive two-dimensional liquid chromatography of sugarcane (Saccharum spp.)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Critical factors to be considered when planning the implementation of environmental improvements and energy saving

To identify the critical success factors in the adoption of energy efficiency actions in Brazilian hospitals and describe their behaviour are the objectives of this paper. In order to achieve these goals, a literature review was performed on green management and energy efficiency. This was the basis to define the questions of the interview script applied to two hospitals located in the state of Sao Paulo, Brazil. The interview script application was complemented by secondary data and direct observation. The results showed that: a) the studied hospitals are embracing environmental management actions more often and, whenever possible, energy efficiency actions are taken as well; and b) in the cases analysed top management support, commitment with the environment, green process design and employee empowerment were some of the most relevant critical success factors to the accomplishment of energy efficiency actions. These findings may be of interest to emerging countries, including BRICS (Brazil, Russia, India, China and South Africa).

A continuous multi-millennial record of surficial bivalve mollusk shells from the Sao Paulo Bight, Brazilian shelf

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diastolic function and functional capacity after a single session of continuous positive airway pressure in patients with compensated heart failure

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of the Extractant on the Complexing Capacity of Humic Substances from Peat for Macro and Micronutrients Using Continuous Flow: Agricultural Application and Environmental Impacts

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Cardiovascular effects of a continuous rate infusion of lidocaine in calves anesthetized with xylazine, midazolam, ketamine and isoflurane

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Limit Cycles for a Class of Continuous and Discontinuous Cubic Polynomial Differential Systems

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effects of a continuous rate infusion of butorphanol in isoflurane-anesthetized horses on cardiorespiratory parameters, recovery quality, gastrointestinal motility and serum cortisol concentrations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aeroelastic stability analysis considering a continuous flight envelope

This paper presents a new methodology to analyze aeroelastic stability in a continuous range of flight envelope with varying parameter of velocity and altitude. The focus of the paper is to demonstrate that linear matrix inequalities can be used to evaluate the aeroelastic stability in a region of flight envelope instead of a single point, like classical methods. The proposed methodology can also be used to study if a system remains stable during an arbitrary motion from one point to another in the flight envelope, i.e., when the problem becomes time-variant. The main idea is to represent the system as a polytopic differential inclusion system using rational function approximation to write the model in time domain. The theory is outlined and simulations are carried out on the benchmark AGARD 445.6 wing to demonstrate the method. The classical pk-method is used for comparing results and validating the approach. It is shown that this method is efficient to identify stability regions in the flight envelope. (C) 2014 Elsevier Ltd. All rights reserved.