The unfathomable secret remains: a reverse engineering study of SEO factors on Google's search engine

The vast majority of users don’t seek results beyond the second page offered by the search engine, so if a site fails to be among the top 20 (second page), it says that this page does not have good SEO and, therefore, is not visible to the user. The overall objective of this project is to conduct a study to discover the factors that determine (or not) the positioning of websites in a search engine.

International journal of engineering education

This work presents an analysis of the assessment tools used by professors at the Universitat Politécnica de Catalunya to assess the generic competencies introduced in the Bachelor’s Degrees in Engineering. In order to conduct this study, a survey was designed and administered anonymously to a sample of the professors most receptive to educational innovation at their own university. All total, 80 professors responded to this survey, of whom 26% turned out to be members of the university’s own evaluation innovation group (https://www.upc.edu/rima/grups/grapa), GRAPA. This percentage represents 47% of the total GRAPA membership, meaning that nearly half of the professors most concerned about evaluation at the university chose to participate. The analysis of the variables carried out using the statistical program SPSS v19 shows that for practically 49% of those surveyed, rubrics are the tools most commonly used to assess generic competencies integrated in more specific ones. Of those surveyed, 60% use them either frequently or always. The most frequently evaluated generic competencies were teamwork (28%), problem solving (26%), effective oral and written communication (24%) and autonomous learning (13%), all of which constitute commonly recognized competencies in the engineering profession. A two-dimensional crosstabs analysis with SPSS v19 shows a significant correlation (Asymp. Sig. 0.001) between the type of tool used and the competencies assessed. However, no significant correlation was found between the type of assessment tool used and the type of subject, type of evaluation (formative or summative), frequency of feedback given to the students or the degree of student satisfaction, and thus none of these variables can be considered to have an influence on the kind of assessment tool used. In addition, the results also indicate that there are no significant differences between the instructors belonging to GRAPA and the rest of those surveyed

A virtual mathematics learning environment for engineering students

Teachers of the course Introduction to Mathematics for Engineers at the UOC, an online distance-learning university, have designed,developed and tested an online studymaterial. It includes basic pre-university mathematics, indications for correct follow-up of this content and recommendations for finding appropriate support and complementarymaterials. Many different resources are used,depending on the characteristics of thecontents: Flash sequences, interactive applets, WIRIS calculators and PDF files.During the last semester, the new study material has been tested with 119 students. The academic results and student satisfaction have allowed us to outline and prioritise future lines of action.

A Virtual Mathematics Learning Environment for Engineering Students

Teachers of the course Introduction to Mathematics for Engineers at the UOC, an online distance-learning university, have designed and produced online study material which includes basic pre-university mathematics, instructions for correct follow-up of this content and recommendations for finding appropiate support and complementary materials.

Factors of customer project profitability in an engineering industrial enterprise

The purpose of the study is to find factors affecting projects' profitability in project business. The issue is approached from customer profitability and project management point of view. The study has been made for a big Finnish company acting in a global market place. The research method is quantitative. Research hypotheses are based on the literature. The used database is originated from the company's ERP- (enterprise resource planning) and project financial follow-up —system. The findings of the study supported the hypotheses weakly. Obviously profitability fluctuated depending on a customer and a project manager. The reasons could not be justified with the variables used in the research.

DFM/DFMA(A) – analysis and aspects of applying systematic engineering for a microwave testfixture design

In this paper, manufacturability analysis and collection of design aspects is made for a microwave test-fixture. Aspects of applying systematic design for a microwave test-fixture design and manufacturing are also analysed. Special questionnaires for the component and machining are made in order to enable necessary information to ensure DFM(A) – aspects of the component. The aspects of easy manufacturing for machining the microwave test-fixture are collected. Material selection is discussed and manufacturing stages of prototype manufacturing are presented.

Drivers and Barriers of Collaboration in the Value Chain of Paperboard-Packed Consumer Goods

Value chain collaboration has been a prevailing topic for research, and there is a constantly growing interest in developing collaborative models for improved efficiency in logistics. One area of collaboration is demand information management, which enables improved visibility and decrease of inventories in the value chain. Outsourcing of non-core competencies has changed the nature of collaboration from intra-enterprise to cross-enterprise activity, and this together with increasing competition in the globalizing markets have created a need for methods and tools for collaborative work. The retailer part in the value chain of consumer packaged goods (CPG) has been studied relatively widely, proven models have been defined, and there exist several best practice collaboration cases. The information and communications technology has developed rapidly, offering efficient solutions and applications to exchange information between value chain partners. However, the majority of CPG industry still works with traditional business models and practices. This concerns especially companies operating in the upstream of the CPG value chain. Demand information for consumer packaged goods originates at retailers' counters, based on consumers' buying decisions. As this information does not get transferred along the value chain towards the upstream parties, each player needs to optimize their part, causing safety margins for inventories and speculation in purchasing decisions. The safety margins increase with each player, resulting in a phenomenon known as the bullwhip effect. The further the company is from the original demand information source, the more distorted the information is. This thesis concentrates on the upstream parts of the value chain of consumer packaged goods, and more precisely the packaging value chain. Packaging is becoming a part of the product with informative and interactive features, and therefore is not just a cost item needed to protect the product. The upstream part of the CPG value chain is distinctive, as the product changes after each involved party, and therefore the original demand information from the retailers cannot be utilized as such – even if it were transferred seamlessly. The objective of this thesis is to examine the main drivers for collaboration, and barriers causing the moderate adaptation level of collaborative models. Another objective is to define a collaborative demand information management model and test it in a pilot business situation in order to see if the barriers can be eliminated. The empirical part of this thesis contains three parts, all related to the research objective, but involving different target groups, viewpoints and research approaches. The study shows evidence that the main barriers for collaboration are very similar to the barriers in the lower part of the same value chain; lack of trust, lack of business case and lack of senior management commitment. Eliminating one of them – the lack of business case – is not enough to eliminate the two other barriers, as the operational model in this thesis shows. The uncertainty of the future, fear of losing an independent position in purchasing decision making and lack of commitment remain strong enough barriers to prevent the implementation of the proposed collaborative business model. The study proposes a new way of defining the value chain processes: it divides the contracting and planning process into two processes, one managing the commercial parts and the other managing the quantity and specification related issues. This model can reduce the resistance to collaboration, as the commercial part of the contracting process would remain the same as in the traditional model. The quantity/specification-related issues would be managed by the parties with the best capabilities and resources, as well as access to the original demand information. The parties in between would be involved in the planning process as well, as their impact for the next party upstream is significant. The study also highlights the future challenges for companies operating in the CPG value chain. The markets are becoming global, with toughening competition. Also, the technology development will most likely continue with a speed exceeding the adaptation capabilities of the industry. Value chains are also becoming increasingly dynamic, which means shorter and more agile business relationships, and at the same time the predictability of consumer demand is getting more difficult due to shorter product life cycles and trends. These changes will certainly have an effect on companies' operational models, but it is very difficult to estimate when and how the proven methods will gain wide enough adaptation to become standards.

Competitive flexibility in systems supplier companies in mechanical engineering industry

Systems suppliers are focal actors in mechanical engineering supply chains, in between general contractors and component suppliers. This research concentrates on the systems suppliers’ competitive flexibility, as a competitive advantage that the systems supplier gains from independence from the competitive forces of the market. The aim is to study the roles that power, dependence relations, social capital, and interorganizational learning have on the competitive flexibility. Research on this particular theme is scarce thus far. The research method applied here is the inductive multiple case study. Interviews from four case companies were used as main source of the qualitative data. The literature review presents previous literature on subcontracting, supply chain flexibility, supply chain relationships, social capital and interorganizational learning. The result of this study are seven propositions and consequently a model on the effects that the dominance of sales of few customers, power of competitors, significance of the manufactured system in the end product, professionalism in procurement and the significance of brand products in the business have on the competitive flexibility. These relationships are moderated by either social capital or interorganizational learning. The main results obtained from this study revolve around social capital and interorganizational learning, which have beneficial effects on systems suppliers’ competitive flexibility, by moderating the effects of other constructs of the model. Further research on this topic should include quantitative research to provide the extent to which the results can be reliably generalized. Also each construct of the model gives possible focus for more thorough research.

Supporting older people’s independent living at home through social and health care collaboration

Tässä tutkimuksessa tarkasteltiin ikäihmisten kotona asumista sosiaali- ja terveydenhuollon yhteistyön näkökulmasta. Tutkimuksen tarkoituksena oli lisätä ymmärrystä iäkkäiden kotihoidon asiakkaiden voimavaroista arjesta selviytymisen näkökulmasta, ja tutkia miten asiakkaiden hoito sosiaali- ja terveydenhuollon yhteistyönä toteutuu. Tutkimus oli poikkileikkaustutkimus, jossa sovellettiin kuvailevaa ja vertailevaa tutkimusasetelmaa. Tutkimusaineisto kerättiin yhden länsisuomalaisen kunnan kotihoidon asiakkailta (≥65 v.) ja heitä hoitavilta ammattihenkilöiltä. Kotihoidon 21 iäkästä asiakasta kuvasivat omia voimavarojaan arjesta selviytymisen näkökulmasta sekä kokemuksiaan hoidon toteutumisesta ammattihenkilöiden yhteistyönä. Aineisto kerättiin avoimella haastattelulla ja analysoitiin sisällön analyysillä. Lisäksi 25 kotihoidon ammattihenkilöä: 13 kotipalvelun työntekijää, 11 kotisairaanhoitajaa ja lääkäri kuvasivat kokemuksiaan iäkkään asiakkaan hoidon toteutumisesta ammattihenkilöiden yhteistyönä. Aineisto kerättiin fokusryhmähaastattelulla ja analysoitiin sisällön analyysillä. Näiden tulosten sekä aikaisemman kirjallisuuden perusteella laadittiin strukturoitu kyselylomake, jolla analysoitiin ja vertailtiin asiakkaiden ja ammattihenkilöiden näkemyksiä siitä, miten asiakkaiden hoito sosiaali- ja terveydenhuollon yhteistyönä toteutui. Esitestausten jälkeen kyselylomake lähetettiin 200 kotihoidon asiakkaalle ja 570 heitä hoitavalle kotihoidon työntekijälle: 485 kotipalvelun työntekijälle, 81 kotisairaanhoitajalle ja 4 lääkärille. Kyselyyn vastasi 120 asiakasta (60 %) ja 370 ammattihenkilöä (65 %). Ryhmien välisten erojen tarkastelussa käytettiin ristiintaulukointia, Pearsonin khin neliötestiä ja Fisherin tarkan todennäköisyyden testiä. Iäkkäiden asiakkaiden kuvauksissa voimavarat muodostuivat elämänhallinnan tunteesta ja toimintatahdon säilymisestä. Asiakkaat ammensivat arkeen voimaa harrastuksista ja sosiaalisesta verkostosta, mutta ulkopuolisten asettamat elämisen ehdot, terveydentilan heikkeneminen sekä yksinäisyys asettivat ikäihmisen ja hänen voimavaransa suurten haasteiden eteen. Tulokset osoittivat, että ammattihenkilöiden toiminta oli osittain ristiriidassa ikäihmisten omien odotusten kanssa, eikä se kaikilta osin tukenut asiakkaiden omia voimavaroja. Ammattihenkilöt tekivät hoitoon liittyviä päätöksiä ja toimintoja asiakkaiden puolesta, vaikka asiakkaille itselleen oli tärkeää elämänhallinnan tunne ja toimintatahdon säilyminen. Asiakkaiden voimavarojen tukemista moniammatillisena yhteistyönä vaikeuttivat ammattihenkilöiden vaikeus tunnistaa asiakkaiden omia voimavaroja sekä niitä uhkaavia tekijöitä, tiedon kulun ongelmat, tavoitteeton ja epäyhtenäinen tapa toimia sekä ammattihenkilöiden vastakkain asettuvat näkemyserot ja toimintatavat. Asiakkaiden ja ammattihenkilöiden näkemykset toteutetusta hoidosta erosivat toisistaan tilastollisesti merkitsevästi (p<0.05). Asiakkaat arvioivat sekä itsenäiseen toimintaan tukemisen että fyysisen, psyykkisen ja sosiaalisen tuen toteutuneen työntekijöitä huonommin. Yhteistyön kehittämishaasteita kotihoidossa ovat asiakkaan oman elämänsä asiantuntijuuden vahvistaminen, toimintakulttuurin muuttaminen asiakaslähtöiseksi tavoitteelliseksi toiminnaksi, ammattihenkilöiden roolien ja vastuun selkiyttäminen sekä tiedon kulun menetelmien kehittäminen. Tutkimus vahvistaa gerontologisen hoitotieteen tietoperustaa ja tuottaa uutta tietoa, jota voidaan soveltaa sosiaali- ja terveysalan koulutuksessa ja johtamisessa

An Engineering Solution for using Coarse Meshes in the Simulation of Delamination with Cohesive Zone Models

This paper presents a methodology to determine the parameters used in the simulation of delamination in composite materials using decohesion finite elements. A closed-form expression is developed to define the stiffness of the cohesive layer. A novel procedure that allows the use of coarser meshes of decohesion elements in large-scale computations is proposed. The procedure ensures that the energy dissipated by the fracture process is correctly computed. It is shown that coarse-meshed models defined using the approach proposed here yield the same results as the models with finer meshes normally used in the simulation of fracture processes

Blended learning and student time-use in engineering education

Aiheen laajempi artikkeli on julkaistu konferenssi-CD:llä.