Separation of lignin in Pulp Mill process and its effect on sodium sulphur balance

The aim of this thesis is to define effects of lignin separation process on Pulp mill chemical balance especially on sodium/sulphur-balance. The objective is to develop a simulation model with WinGEMS Process Simulator and use that model to simulate the chemical balances and process changes. The literature part explains what lignin is and how kraft pulp is produced. It also introduces to the methods that can be used to extract lignin from black liquor stream and how those methods affect the pulping process. In experimental part seven different cases are simulated with the created simulation model. The simulations are based on selected reference mill that produces 500 000 tons of bleached air-dried (90 %) pulp per year. The simulations include the chemical balance calculation and the estimated production increase. Based on the simulations the heat load of the recovery boiler can be reduced and the pulp production increased when lignin is extracted. The simulations showed that decreasing the waste acid stream intake from the chlorine dioxide plant is an effective method to control the sulphidity level when about 10 % of lignin is extracted. With higher lignin removal rates the in-mill sulphuric acid production has been discovered to be a better alternative to the sulphidity control.

The feasibility of torrefaction for the co-firing of wood in pulverised-fuel boilers

Torrefaction is the partial pyrolysis of wood characterised by thermal degradation of predominantly hemicellulose under inert atmosphere. Torrefaction can be likened to coffee roasting but with wood in place of beans. This relatively new process concept makes wood more like coal. Torrefaction has attracted interest because it potentially enables higher rates of co-firing in existing pulverised-coal power plants and hence greater net CO2 emission reductions. Academic and entrepreneurial interest in torrefaction has sky rocketed in the last decade. Research output has focused on the many aspects of torrefaction – from detailed chemical changes in feedstock to globally-optimised production and supply scenarios with which to sustain EU emission-cutting directives. However, despite its seemingly simple concept, torrefaction has retained a somewhat mysterious standing. Why hasn’t torrefied pellet production become fully commercialised? The question is one of feasibility. This thesis addresses this question. Herein, the feasibility of torrefaction in co-firing applications is approached from three directions. Firstly, the natural limitations imposed by the structure of wood are assessed. Secondly, the environmental impact of production and use of torrefied fuel is evaluated and thirdly, economic feasibility is assessed based on the state of the art of pellet making. The conclusions reached in these domains are as follows. Modification of wood’s chemical structure is limited by its naturally existing constituents. Consequently, key properties of wood with regards to its potential as a co-firing fuel have a finite range. The most ideal benefits gained from wood torrefaction cannot all be realised simultaneously in a single process or product. Although torrefaction at elevated pressure may enhance some properties of torrefied wood, high-energy torrefaction yields are achieved at the expense of other key properties such as heating value, grindability, equilibrium moisture content and the ability to pelletise torrefied wood. Moreover, pelletisation of even moderately torrefied fuels is challenging and achieving a standard level of pellet durability, as required by international standards, is not trivial. Despite a reduced moisture content, brief exposure of torrefied pellets to water from rainfall or emersion results in a high level of moisture retention. Based on the above findings, torrefied pellets are an optimised product. Assessment of energy and CO2-equivalent emission balance indicates that there is no environmental barrier to production and use of torrefied pellets in co-firing. A long product transport distance, however, is necessary in order for emission benefits to exceed those of conventional pellets. Substantial CO2 emission reductions appear possible with this fuel if laboratory milling results carry over to industrial scales for direct co-firing. From demonstrated state-of-the-art pellet properties, however, the economic feasibility of torrefied pellet production falls short of conventional pellets primarily due to the larger capital investment required for production. If the capital investment for torrefied pellet production can be reduced significantly or if the pellet-making issues can be resolved, the two production processes could be economically comparable. In this scenario, however, transatlantic shipping distances and a dry fuel are likely necessary for production to be viable. Based on demonstrated pellet properties to date, environmental aspects and production economics, it is concluded that torrefied pellets do not warrant investment at this time. However, from the presented results, the course of future research in this field is clear.

Enhancement of ultrafiltration process by pretreatment in recovery of hemicelluloses from wood extracts

Hemicelluloses are potential raw material for several items produced in future wood-based biorefineries. One possible method for recovering hemicelluloses from wood extracts is ultrafiltration (UF). However, low filtration capacities and severe fouling restrict the use of tight UF membranes in the treatment of wood extracts. The lack of suitable commercial membranes creates a need for pretreatment which would decrease fouling and increase the filtration capacity. This thesis focuses on the evaluation of the possibility to improve the filtration capacity and decrease fouling with the pretreatment of wood extracts. Methods which remove harmful compounds and methods which degrade them are studied, as well as combinations of the methods. The tested pretreatments have an influence on both the concentration of different compounds and the molecular mass distribution of the compounds in the extract. This study revealed that in addition to which kind of compounds were removed, also the change in molecular size distribution affected the filtration capacity significantly. It was shown that the most harmful compounds for the filtration capacity of the hydrophobic 5 kDa membrane were the ones capable of permeating the membrane and fouling also the inner membrane structure. Naturally, the size of the most harmful compounds depends on the used UF membrane and is thus case-specific. However, in the choice of the pretreatment method, the focus should be on the removal of harmful compound sizes rather than merely on the total amount of removed foulants. The results proved that filtration capacity can be increased with both adsorptive and oxidative pretreatments even by hundreds of per cents. For instance, the use of XAD7 and XAD16 adsorbents increased the average flux in the UF of a birch extract from nearly zero to 107 kg/(m2h) and 175 kg/(m2h), respectively. In the treatment of a spruce extract, oxidation by pulsed corona discharge (PCD) increased the flux in UF from 46 kg/(m2h) to 158 kg/(m2h). Moreover, when a birch extract batch was treated with laccase enzyme, the flux in UF increased from 15 kg/(m2h) to 36 kg/(m2h). However, fouling was decreased only by adsorptive pretreatment while oxidative methods had a negligible or even negative impact on it. This demonstrates that filtration capacity and fouling are affected by different compounds and mechanisms. The results of this thesis show that filtration capacity can be improved and fouling decreased through appropriate pretreatment. However, the choice of the best possible pretreatment is case-specific and depends on the wood extract and the membrane used. Finding the best option requires information on the extract content and membrane characteristics as well as on the filtration performance of the membrane in the prevailing conditions and a multivariate approach. On the basis of this study, it can be roughly concluded that adsorptive pretreatment improves the filtration capacity and decreases fouling rather reliably, but it may lead to significant hemicellulose losses. Oxidation reduces the loss of valuable hemicelluloses and could improve the filtration capacity, but fouling challenges may remain. Combining oxidation with adsorptive pretreatment was not a solution for avoiding hemicellulose losses in the tested cases.

Crescimento da firma e comércio exterior: revisitando a teoria de Adrian Wood

This paper analyzes the growth of the firm by foreign trade. The theory of Adrian Wood is revisited for the analysis of growth and profit trade-off and improved to cope with growth by exports. The main outcome of this paper is that low domestic demand can be a very important factor to firm choices growth by foreign market. However, the growth of domestic demand does not necessarily reduce exports.

Tuotannon- ja materiaalinsuunnittelu ja sen ennustaminen Metsä Wood:n Suolahden koivuvaneritehtaalla

Tässä diplomityössä tutkitaan Metsä Woodin Suolahden koivuvaneritehtaan toimitustarkkuuteen negatiivisesti vaikuttavia tekijöitä. Tarkoituksena on löytää ne ongelmakohdat, mitkä heijastuvat toimitusten myöhästymisenä sekä muutostekijät, mitkä vaikuttavat toimitusviikon myöntämiseen. Lisäksi työssä kartoitetaan kuinka hyvin tietoa ja informaatiota on tarjolla sitä tarvitseville henkilöstötahoille. Teoriaosuudessa tarkastellaan tuotannonsuunnitteluun liittyviä teorioita sekä tiedon liikkumista organisaation sisällä. Työssä kuvataan Suolahden koivuvaneritehtaan nykyinen vanerin valmistusprosessi ja tuotannonsuunnittelu. Varsinainen tutkimustyö suoritetaan laadullisia tutkimusmenetelmiä hyväksikäyttäen. Tulosten tarkastelussa käsitellään työn aikana tapahtuneita muutoksia ja ongelmakohtia sekä analysoidaan kyselytutkimuksen tuloksia ja tulosten luotettavuutta. Yhteenvedossa esitetään pääongelmakohdat ja niiden ratkaisut ja esitetään uusia mielenkiintoisia jatkotutkimusaiheita.

Hemiselluloosien talteenotto paineistetulla kuumavesiuutolla tuotetuista puu-uutteista

Puunjalostusteollisuus keskittyy tällä hetkellä lähinnä sellun ja paperin tuotantoon. Sellun tuotannossa käytetään puun komponenteista vain selluloosa. Puun muita pääkomponentteja ovat hemiselluloosa ja ligniini. Nämä yhdisteet ovat mahdollisia tulevaisuuden biomateriaalien lähtöaineita, mutta tähän mennessä ne on jätetty käyttämättä hyödyksi. Paineistettu kuumavesiuutto on menetelmä, jolla hemiselluloosat ja ligniinit olisi mahdollista erottaa puumateriaalista ennen sellunkeittoa, ja sen jälkeen fraktioida uutteesta erilleen jatkojalostusta varten. Fraktioinnista on tehty tutkimusta monella erilaisella menetelmällä ja eri menetelmiä yhdistelemällä. Tämä kandidaatin työ on kirjallinen työ, jossa käsitellään paineistettua kuumavesiuuttoa, sekä eri yksikköoperaatioita ja niiden mahdollisuuksia hemiselluloosan erotukseen puu-uutteista. Membraanisuodatus on menetelmä, jolla puu-uutteesta saadaan erotettua konsentroitu hemiselluloosafraktio. Membraanisuodatuksessa on kuitenkin puu-uutteiden tapauksessa havaittu ongelmia muun muassa kalvon likaantumisen kanssa. Yhdistämällä muutamia eri yksikköoperaatioita, saadaan parannettua membraanisuodatuksen tehoa, sekä hemiselluloosan puhtautta ja saantoa. Näitä mahdollisia yksikköoperaatioita ovat adsorptio, hapetus, saostus, kromatografiset menetelmät ja neste-nesteuutto.

Research progress in wood-plastic composites: A review

The interest towards wood-plastic composites (WPCs) is growing due to growing interest in materials with novel properties, which can replace more traditional materials, such as wood and plastic. The use of recycled materials in manufacture is also a bonus. However, the application ofWPCs has been limited because of their often poor mechanical and barrier properties, which can be improved by incorporation of the reinforcing fillers. Nanosized fillers, having a large surface area, can significantly increase interfacial interactions in the composite on molecular level, leading to materials with new properties. The review summarizes the development trends in the use on nanofillers for WPC design, which were reported in accessible literature during the last decade. The effect of the nanofillers on the mechanical properties, thermal stability, flammability and wettability ofWPC is discussed.

Reorganising purchasing organisation – Case Metsä Wood

The purpose of this study is to investigate how a global company should organise its purchasing operations. The theoretical framework of this study consists of organisation structures, management and coordination, purchasing organisational design, capabilities and outsourcing. The research is a qualitative case study and the used method was theme interview. Four global large scale companies were interviewed for this research in order to gain knowledge about how other companies have organised their purchasing functions and to gather their best practices. Interview results and theoretical framework were compared in order to test the theoretical framework and to create a detailed framework about how to organise purchasing operations in a global company. As a result a 14 point model about effective purchasing operation organisation for a global company was created. This model includes all the key determinants which should be considered when organising the purchasing operations. The results show that the organising decision should be always in line with company and purchasing strategies. Strategic purchasing operations should be centralized and operative tasks decentralized.

Modelling the exothermic heat and the demand of cooling in paper and pulp industry biological wastewater treatment

This master thesis presents a study on the requisite cooling of an activated sludge process in paper and pulp industry. The energy consumption of paper and pulp industry and it’s wastewater treatment plant in particular is relatively high. It is therefore useful to understand the wastewater treatment process of such industries. The activated sludge process is a biological mechanism which degrades carbonaceous compounds that are present in waste. The modified activated sludge model constructed here aims to imitate the bio-kinetics of an activated sludge process. However, due to the complicated non-linear behavior of the biological process, modelling this system is laborious and intriguing. We attempt to find a system solution first using steady-state modelling of Activated Sludge Model number 1 (ASM1), approached by Euler’s method and an ordinary differential equation solver. Furthermore, an enthalpy study of paper and pulp industry’s vital pollutants was carried out and applied to revise the temperature shift over a period of time to formulate the operation of cooling water. This finding will lead to a forecast of the plant process execution in a cost-effective manner and management of effluent efficiency. The final stage of the thesis was achieved by optimizing the steady state of ASM1.

The efficacy of anti-predator behaviour in the wood fog tadpole (Rana sylvatica) /

Activity has been suggested as an important behaviour that is tightly linked with predator avoidance in tadpoles. In this thesis I examine predator-prey relationships using wood frog tadpoles {Rana sylvaticd) as prey and dragonfly larvae {AnaxJunius) and backswimmers {Notonecta undulatd) as predators. I explore the role of prey activity in predator attack rates, prey response to single and multiple predator introductions, and prey survivorship. The data suggest that Anax is the more successful predator, able to capture both active and inactive tadpoles. In contrast, Notonecta strike at inactive prey less frequently and are seldom successftil when they do. A mesocosm study revealed that the presence of any predator resulted in reduced activity level of tadpoles. Each predator species alone had similar effects on tadpole activity, as did the combined predator treatment. Tadpole survivorship, however, differed significantly among both predator treatments and prey populations. Tadpwles in the combined predator treatment had enhanced risk; survivorship was lower than that expected if the two predators had additive effects. Differences in survivorship among wood frog populations showed that tadpoles from a lake habitat had the lowest survivorship, those from a shallow pond habitat had an intermediate survivorship, and tadpoles from a marsh habitat had the highest survivorship. The frequency of interactions with predators in the native habitat may be driving the population differences observed. In conclusion, results from this study show that complex interactions exist between predators, prey, and the environment, with activity playing a key role in the survival of tadpoles.

Welland Canal Survey of Lands Samuel Wood Esquire, 1828

Survey map and description of Samuel Wood's land created by The Welland Canal Company. Included is a written description of the land along with a drawing of the land. The same description of the land is also in a deed dated Septmeber 16, 1828 (see county registry 739). Noteable features include; the canal, the tow path, the tow path bridge. Surveyor notes are seen in pencil on the map. The original deed for the land is dated May 16, 1828.

Joanna E. Wood short stories, 1898-1900

Joanna Ellen Wood (1867-1927) was an acclaimed Canadian author who wrote several novels and short stories. Wood was born in Scotland, but emigrated to Canada with her family in 1869. In 1874 her father purchased a farm overlooking the Niagara River at Queenston. It is believed she was supported by her brother William, who encouraged her writing. She was based in New York City from 1887-1901, using William’s business address there to receive correspondence while she traveled or spent time in Queenston. Around 1906, Wood moved with her mother to Niagara-on-the-Lake, where she joined the Niagara Historical Society. By 1914, she was living in Buffalo, but later spent time at her sisters’ homes. It was at her sister’s home in Detroit where she suffered a stroke and died in 1927. Wood’s literary career was short-lived. She published her first novel, The Untempered Wind , in 1894, and a second novel, Judith Moore …, in 1898. Both novels received critical acclaim, and a third novel, Farden Ha', followed in 1902. Unfortunately the majority of Wood’s numerous and award-winning writings cannot be found. Her career peaked in 1901, when she was the highest paid Canadian fiction writer. For unknown reasons, her career abruptly ceased in 1902, with no further publications or mention made of her in the Canadian Magazine.

Letter to the Honourable William Dickson at Wood Lawn, Youngstown, New York from W. Bushby

Letter to the Honourable William Dickson at Wood Lawn, Youngstown, New York from W. Bushby. He says that Mary is probably going to marry Mr. Lyon and he asks if there is any chance that Mr. Dickson could come for the wedding. He says he heard about the death of George Hamilton from John Hamilton (3 ½ pages, handwritten), Sept. 29, 1836.

Inventory of goods and chattels belonging to Samuel Wood and delivered to the Honourable William Dickson

Inventory of goods and chattels belonging to Samuel Wood and delivered to the Honourable William Dickson (double-sided, handwritten page), Dec. 10, 1828.