Germinação de sementes e otimização de técnicas de micropropagação de umbuzeiro (spondias tuberosa, arr.) anacardiaceae

The brazilian-plum (Spondias tuberosa, His) is a tropical fruit tree that has been consolidated in the market for agribusiness processing, due to its characteristic flavor of fruit. Accordingly, studies to optimize the propagation of plants are necessary for production of seedlings with agronomic and quality assurance measures. This study aimed at determining the efficient techniques for uniform seed germination, as brazilian-plum seed present mechanical dormancy, and establish optimal culture media for multiplication of shoots from the in vitro micropropagation. Firstly, in a greenhouse at the Universidade Federal do Rio Grande do Norte, was evaluated the influence of different methods of breaking dormancy in the emergence of seedlings of brazilian-plum and speed of germination (IVG) of seeds. After 60 days of cultivation, it was found that splay in the distal portion of the seed was the best treatment, with rates of 85.33% in germinability and 3.415 of IVG, compared with the treatment of seed-soaking in water for 12h + humus and the control group. Subsequently, new sources of seedling explants were obtained in studies of tissue culture. Laboratory of Plant Biotechnology that the university, was used stem apex, nodal segments and internodes in search of decontamination with various concentrations of calcium hypochlorite [Ca(OCl)2] and micropropagation, inoculating them in half WPM (1980) with various concentrations of 6-benzylaminopurine (BAP). We used 10 sample units with three replications for different concentrations of [Ca(OCl)2], BAP and explants type. After thirty days, which was observed for the control of contamination, during the establishment in vitro, concentrations of [Ca(OCl)2] between 0.5% and 2.0% were effective in combating exogenous contamination of the apex. In nodal segments and internodes, concentrations of [Ca(OCl)2] between 1.0% and 2.0% and 1.5% and 2.0% were respectively, sufficient to reduce the percentage of losses in these infestations explants. For micropropagation, the culture medium supplemented with 0.1 mg.L-1 BAP promotes better development of multiple shoots per explants from nodal segment. However, success does not get to shoot training in internodal segment

Individual differences in preferences for recruitment websites

This study investigated individual differences in preferences for recruitment websites. Specifically, I expected that personality and ethnic identity would be related to individuals' preferences for corporate websites. A policy-capturing methodology was employed to determine the weight participants place on five website characteristics (i.e. navigability, information relevancy, diversity information, privacy, and contact). Regression and correlational analyses were employed with the five beta weights obtained from individual regression analyses and the other individual differences measures. Results from two samples (student and general population) revealed that, generally, individuals do not differ in the weight they place on different aspects of recruitment websites. However, this study is the first to investigate individual differences in preferences for recruitment websites. Thus, it seems premature to conclude that such differences do not exist. Given its uniqueness, hopefully this study will stimulate research that further elucidates the process by which individuals interpret and evaluate recruitment websites.

Análise e otimização de viagens rodoviária

O Trabalho de seguida apresentado fundou-se num objetivo que passava por provar a grande relação entre o estilo de condução e os valores de consumo de uma viatura num determinado trajeto, sendo que, para isso, foi necessário criar ferramentas que permitissem extrair, analisar e otimizar dados de viagens. Durante este trabalho, foi criado uma ferramenta que permite extrair dados de posição, tempo, velocidade, aceleração e azimute de um ficheiro GPX. A estes dados, também foram aplicados métodos para corrigi-los e facilitar a sua respetiva análise. Nomeadamente, foi desenvolvido um algoritmo para o cálculo de distância entre pontos de latitude e longitude, e foi criado também, um método que possibilita o cálculo do raio e ângulo das curvas do trajeto. Durante este trabalho, criou-se também métodos de otimização de certas variáveis de um trajeto. As otimizações criadas tinham em vista racionalizar o estilo de condução, sendo que, os resultados destas otimizações demonstram a relação entre certas variáveis e o consumo. Por fim, também foi criado um programa que engloba algumas funções criadas no trabalho, como a extração de dados do ficheiro GPX e cálculo do consumo. Este programa permite aceder a várias funções de um forma mais cómodas e simples.

O uso de ciliados Euplotes sp. em aquacultura ornamental: Otimização das condições de cultivo

Estima-se que menos de 10% dos animais marinhos comercializados para fins ornamentais sejam originários de produção em aquacultura. O desenvolvimento de “hatchery’s” de peixes de recife são essenciais para uma reprodução em cativeiro, confiável e sustentável, para que seja possível reduzir a pressão sobre as populações selvagens. O principal entrave à aquacultura ornamental marinha é a criação de larvas, devido à dificuldade em obter um alimento vivo, uma vez que, estas são muito pequenas quando eclodem. Rotíferos e artémia são as presas vivas mais utilizados na produção de peixes marinhos, mas não são utilizadas para larvas de peixes ornamentais devido à sua dimensão. Recentemente, os ciliados Euplotes sp. surgiram como uma potencial presa viva estas para larvas, devido ao seu pequeno tamanho, podem preencher a lacuna existente entre a primeira alimentação e a aceitação de rotíferos ou náuplios de copépodes. O presente trabalho teve como objetivo otimizar as condições de cultivo quer de alimentação (melhor alimentação, frequência e quantidade), fotoperíodo, salinidade e temperatura para a produção em massa de Euplotes sp.. Os principais resultados mostraram que as culturas de Euplotes sp. podem alcançar o seu crescimento ótimo com o fornecimento de 0,25 g/L de levedura de padeiro (S.cereviviae) a cada três dias, salinidade 30, 28ºC de temperatura, fotoperíodo de 12hLuz:12hEscuro, com arejamento constante. Neste momento, o conhecimento sobre a produção em escala de ciliados é muito reduzido e este estudo veio fornecer, pela primeira vez, informações técnicas sobre as condições ideais para a produção em escala deste potencial alimento de larvas de peixes marinhos ornamentais.

Introdução à Matemática - Álgebra, Análise e Otimização

Este livro destina-se às/aos estudantes das várias disciplinas de introdução à matemática nos cursos superiores que incluem algum conteúdo matemático, mas sem prosseguirem para uma formação aprofundada nesta disciplina. Aprender é difícil. No caso particular da matemática essa dificuldade está principalmente na sua natureza estritamente abstrata, embora seja aumentada por um conjunto de factores materiais e culturais (que incluem a infame pergunta/desculpa "mas afinal, para que é que isto serve?" e más práticas como "deixar as matemáticas para o fim do curso"). Com este livro pretendemos ajudar a reduzir as dificuldades materiais e, portanto, contingentes mas desnecessárias que assombram a aprendizagem da Matemática. A nossa experiência como professores (em conjunto, mais de sessenta anos) precisamente para estes estudantes, nestes cursos, produziu uma atitude pragmática para este tipo específico de ensino: o conteúdo deve ser comunicado claramente, rigorosamente e em pequenas doses concretizadas abundantemente com exemplos e exercícios. Ao longo dos anos, conforme fomos refinando esta abordagem, também fomos observando os seus efeitos: os nossos estudantes aprendem melhor a matéria, de forma mais aprofundada e com melhores resultados. É esse pragmatismo que orienta o conteúdo da "Introdução à Matemática": a apresentação dos conceitos teóricos é sucinta, rigorosa, está claramente identificada, acompanhada por exemplos e complementada por inúmeros exercícios. Cada parte do livro corresponde a uma das grandes áreas da matemática normalmente presentes no ensino superior: a álgebra linear, a análise infinitesimal e a otimização.

Otimização de marcadores desenvolvidos para PCR convencional para uso em qPCR visando a diagnose de Xanthomonas campestris pv viticola em videira.

No Brasil, Xanthomonas campestris pv. viticola (Xcv), causadora do cancro bacteriano em videira, é uma praga quarentenária A2, com ocorrência no Semiárido Nordestino. A bactéria pode ser disseminada de plantas assintomáticas pela distribuição de material propagativo e ocorrências restritas da doença em outras regiões foram identificadas. Para diagnose confiável por PCR convencional, o DNA deve ser extraído de culturas de bactérias isoladas de tecido com sintomas suspeitos. Com a técnica, é possível detectar até 0,25 pg de DNA bacteriano total. Atualmente, métodos que empregam tecidos assintomáticos não estão disponíveis. O objetivo deste trabalho foi desenvolver um protocolo sensível à detecção de Xcv por qPCR, empregando iniciadores disponíveis da técnica convencional.

Otimização e validação de sistema multiplex para genotipagem de SNPs em genes candidatos relacionados a características de interesse econômico

2015

Seleção de marcadores microssatélites e otimização de protocolo de amplificação em alfafa.

2016

Otimização da síntese de nanopartículas para encapsulamento de princípios ativos aplicados em revestimento pós-colheita.

Polissacarídeos, como quitosana, são muito empregados para a obtenção de nanopartículas (NP), mas, a concentração e o tipo de ácido para solubilizar a quitosana pode influenciar na qualidade. Isto também influenciará na eficiência de encapsulação de princípios ativos, e.g., óleo essencial e polifenóis. Assim, para otimizar os parâmetros de síntese de NP, foram feitas análises de condutividade, tamanho de partículas e morfologia em diferentes concentrações de ácido acético e clorídrico (1,0%; 0,5% e 0,1%). Com as análises de condutividade, observou-se que há excesso de ácido na concentração de 1% e isto demanda mais adição de tripolifosfato de sódio (TPP). NP, com tamanho desejável em torno de 200 nm, podem ser obtida empregando menos ácido (0,1%) e também menor quantidade de TPP.

Advanced nursing practice : a global perspective

Aim: To review the titles, roles and scope of practice of Advanced Practice Nurses internationally.----- Background: There is a worldwide shortage of nurses but there is also an increased demand for nurses with enhanced skills who can manage a more diverse, complex and acutely ill patient population than ever before. As a result, a variety of nurses in advanced practice positions has evolved around the world. The differences in nomenclature have led to confusion over the roles, scope of practice and professional boundaries of nurses in an international context.----- Method: CINAHL, Medline, and the Cochrane database of Systematic Reviews were searched from 1987 to 2008. Information was also obtained through government health and professional organisation websites. All information in the literature regarding current and past status, and nomenclature of advanced practice nursing was considered relevant.----- Findings: There are many names for Advanced Practice Nurses, and although many of these roles are similar in their function, they can often have different titles.----- Conclusion: Advanced Practice Nurses are critical for the future, provide cost-effective care and are highly regarded by patients/clients. They will be a constant and permanent feature of future health care provision. However, clarification regarding their classification and regulation is necessary in some countries.

Using the Internet to leverage sponsorships

This study considers the effectiveness of the Internet as a medium through which sponsorship investments can be leveraged. It considers the variables of sponsor-sponsee congruence,articulation, and the extent to which a sponsorship is leveraged via sponsor websites, in relation to consumer attitudes toward brand and company level variables across time. Results show that,consumer attitudes are more favourable for congruent sponsorships, those that are not articulated in commercially-oriented terms, and those that are leveraged via sponsor websites. Additionally, after a seven-day delay, leveraged sponsorships display sustained positive attitudes whereas those not leveraged display a decline in attitudes.

Electronic tendering: an industry perspective

The construction industry is categorised as being an information-intensive industry and described as one of the most important industries in any developed country, facing a period of rapid and unparalleled change (Industry Science Resources 1999) (Love P.E.D., Tucker S.N. et al. 1996). Project communications are becoming increasingly complex, with a growing need and fundamental drive to collaborate electronically at project level and beyond (Olesen K. and Myers M.D. 1999; Thorpe T. and Mead S. 2001; CITE 2003). Yet, the industry is also identified as having a considerable lack of knowledge and awareness about innovative information and communication technology (ICT) and web-based communication processes, systems and solutions which may prove beneficial in the procurement, delivery and life cycle of projects (NSW Government 1998; Kajewski S. and Weippert A. 2000). The Internet has debatably revolutionised the way in which information is stored, exchanged and viewed, opening new avenues for business, which only a decade ago were deemed almost inconceivable (DCITA 1998; IIB 2002). In an attempt to put these ‘new avenues of business’ into perspective, this report provides an overall ‘snapshot’ of current public and private construction industry sector opportunities and practices in the implementation and application of web-based ICT tools, systems and processes (e-Uptake). Research found that even with a reserved uptake, the construction industry and its participating organisations are making concerted efforts (fortunately with positive results) in taking up innovative forms of doing business via the internet, including e-Tendering (making it possible to manage the entire tender letting process electronically and online) (Anumba C.J. and Ruikar K. 2002; ITCBP 2003). Furthermore, Government (often a key client within the construction industry),and with its increased tendency to transact its business electronically, undoubtedly has an effect on how various private industry consultants, contractors, suppliers, etc. do business (Murray M. 2003) – by offering a wide range of (current and anticipated) e-facilities / services, including e-Tendering (Ecommerce 2002). Overall, doing business electronically is found to have a profound impact on the way today’s construction businesses operate - streamlining existing processes, with the growth in innovative tools, such as e-Tender, offering the construction industry new responsibilities and opportunities for all parties involved (ITCBP 2003). It is therefore important that these opportunities should be accessible to as many construction industry businesses as possible (The Construction Confederation 2001). Historically, there is a considerable exchange of information between various parties during a tendering process, where accuracy and efficiency of documentation is critical. Traditionally this process is either paper-based (involving large volumes of supporting tender documentation), or via a number of stand-alone, non-compatible computer systems, usually costly to both the client and contractor. As such, having a standard electronic exchange format that allows all parties involved in an electronic tender process to access one system only via the Internet, saves both time and money, eliminates transcription errors and increases speed of bid analysis (The Construction Confederation 2001). Supporting this research project’s aims and objectives, researchers set to determine today’s construction industry ‘current state-of-play’ in relation to e-Tendering opportunities. The report also provides brief introductions to several Australian and International e-Tender systems identified during this investigation. e-Tendering, in its simplest form, is described as the electronic publishing, communicating, accessing, receiving and submitting of all tender related information and documentation via the internet, thereby replacing the traditional paper-based tender processes, and achieving a more efficient and effective business process for all parties involved (NT Governement 2000; NT Government 2000; NSW Department of Commerce 2003; NSW Government 2003). Although most of the e-Tender websites investigated at the time, maintain their tendering processes and capabilities are ‘electronic’, research shows these ‘eTendering’ systems vary from being reasonably advanced to more ‘basic’ electronic tender notification and archiving services for various industry sectors. Research also indicates an e-Tender system should have a number of basic features and capabilities, including: • All tender documentation to be distributed via a secure web-based tender system – thereby avoiding the need for collating paperwork and couriers. • The client/purchaser should be able to upload a notice and/or invitation to tender onto the system. • Notification is sent out electronically (usually via email) for suppliers to download the information and return their responses electronically (online). • During the tender period, updates and queries are exchanged through the same e-Tender system. • The client/purchaser should only be able to access the tenders after the deadline has passed. • All tender related information is held in a central database, which should be easily searchable and fully audited, with all activities recorded. • It is essential that tender documents are not read or submitted by unauthorised parties. • Users of the e-Tender system are to be properly identified and registered via controlled access. In simple terms, security has to be as good as if not better than a manual tender process. Data is to be encrypted and users authenticated by means such as digital signatures, electronic certificates or smartcards. • All parties must be assured that no 'undetected' alterations can be made to any tender. • The tenderer should be able to amend the bid right up to the deadline – whilst the client/purchaser cannot obtain access until the submission deadline has passed. • The e-Tender system may also include features such as a database of service providers with spreadsheet-based pricing schedules, which can make it easier for a potential tenderer to electronically prepare and analyse a tender. Research indicates the efficiency of an e-Tender process is well supported internationally, with a significant number, yet similar, e-Tender benefits identified during this investigation. Both construction industry and Government participants generally agree that the implementation of an automated e-Tendering process or system enhances the overall quality, timeliness and cost-effectiveness of a tender process, and provides a more streamlined method of receiving, managing, and submitting tender documents than the traditional paper-based process. On the other hand, whilst there are undoubtedly many more barriers challenging the successful implementation and adoption of an e-Tendering system or process, researchers have also identified a range of challenges and perceptions that seem to hinder the uptake of this innovative approach to tendering electronically. A central concern seems to be that of security - when industry organisations have to use the Internet for electronic information transfer. As a result, when it comes to e-Tendering, industry participants insist these innovative tendering systems are developed to ensure the utmost security and integrity. Finally, if Australian organisations continue to explore the competitive ‘dynamics’ of the construction industry, without realising the current and future, trends and benefits of adopting innovative processes, such as e-Tendering, it will limit their globalising opportunities to expand into overseas markets and allow the continuation of international firms successfully entering local markets. As such, researchers believe increased knowledge, awareness and successful implementation of innovative systems and processes raises great expectations regarding their contribution towards ‘stimulating’ the globalisation of electronic procurement activities, and improving overall business and project performances throughout the construction industry sectors and overall marketplace (NSW Government 2002; Harty C. 2003; Murray M. 2003; Pietroforte R. 2003). Achieving the successful integration of an innovative e-Tender solution with an existing / traditional process can be a complex, and if not done correctly, could lead to failure (Bourn J. 2002).

ARCS collaboration tools

The Australian Research Collaboration Service (ARCS) has been supporting a wide range of Collaboration Services and Tools which have been allowing researchers, groups and research communities to share ideas and collaborate across organisational boundaries.----- This talk will give an introduction to a number of exciting technologies which are now available. Focus will be on two main areas of Video Collaboration Tools, allowing researchers to talk face-to-face and share data in real-time, and Web Collaboration Tools, allowing researchers to share information and ideas with other like-minded researchers irrespective of distance or organisational structure. A number of examples will also be shown of how these technologies have been used with in various research communities.----- A brief introduction will be given to a number of services which ARCS is now operating and/or supporting such as:--- * EVO – A video conferencing application, which is particularly suited to desktop or low bandwidth applications.--- * AccessGrid – An open source video conferencing and collaboration tool kit, which is great for room to room meetings.--- * Sakai – An online collaboration and learning environment, support teaching and learning, ad hoc group collaboration, support for portfolios and research collaboration.--- * Plone – A ready-to-run content management system, that provides you with a system for managing web content that is ideal for project groups, communities, web sites, extranets and intranets.--- * Wikis – A way to easily create, edit, and link pages together, to create collaborative websites.

ARCS collaboration tools and support workshop

Registration fees for this workshop are being met by ARCS. There is no cost to attend; however space is limited.----- The Australian Research Collaboration Service (ARCS) has been supporting a wide range of Collaboration Services and Tools which have been allowing researchers, groups and research communities to share ideas and collaborate across organisational boundaries.----- This workshop will give an introduction into a number of web based and real-time collaboration tools and services which researchers may find useful for day-to-day collaboration with members of a research team located within an institution or across institutions. Attendees will be shown how a number of these tools work with strong emphasis placed on how these tools can help facilitate communication and collaboration. Attendees will have the opportunity to try out a number of examples themselves, and interact with the workshop staff to discuss how their own use cases could benefit from the tools and services which can be provided.----- Outline: A hands on introduction will be given to a number of services which ARCS is now operating and/or supporting such as:--- * EVO – A video conferencing environment, which is particularly suited to desktop or low bandwidth applications.--- * AccessGrid – An open source video conferencing and collaboration tool kit, which is great for room to room meetings.--- * Sakai – An online collaboration and learning environment, support teaching and learning, ad hoc group collaboration, support for portfolios and research collaboration.--- * Plone and Drupal – A ready-to-run content management system, that provides you with a system for managing web content that is ideal for project groups, communities, web sites, extranets and intranets.--- * Wikis – A way to easily create, edit, and link pages together, to create collaborative websites.

The comprehensive Australian Study of entrepreneurial emergence (CAUSEE) high potential nascent entrepreneurs : some preliminary findings

Principal Topic The Comprehensive Australian Study of Entrepreneurial Emergence (CAUSEE) represents the first Australian study to employ and extend the longitudinal and large scale systematic research developed for the Panel Study of Entrepreneurial Dynamics (PSED) in the US (Gartner, Shaver, Carter and Reynolds, 2004; Reynolds, 2007). This research approach addresses several shortcomings of other data sets including under coverage; selection bias; memory decay and hindsight bias, and lack of time separation between the assessment of causes and their assumed effects (Johnson et al 2006; Davidsson 2006). However, a remaining problem is that any a random sample of start-ups will be dominated by low potential, imitative ventures. In recognition of this issue CAUSEE supplemented PSED-type random samples with theoretically representative samples of the 'high potential' emerging ventures employing a unique methodology using novel multiple screening criteria. We define new ''high-potential'' ventures as new entrepreneurial innovative ventures with high aspirations and potential for growth. This distinguishes them from those ''lifestyle'' imitative businesses that start small and remain intentionally small (Timmons, 1986). CAUSEE is providing the opportunity to explore, for the first time, if process and outcomes of high potentials differ from those of traditional lifestyle firms. This will allows us to compare process and outcome attributes of the random sample with the high potential over sample of new firms and young firms. The attributes in which we will examine potential differences will include source of funding, and internationalisation. This is interesting both in terms of helping to explain why different outcomes occur but also in terms of assistance to future policymaking, given that high growth potential firms are increasingly becoming the focus of government intervention in economic development policies around the world. The first wave of data of a four year longitudinal study has been collected using these samples, allowing us to also provide some initial analysis on which to continue further research. The aim of this paper therefore is to present some selected preliminary results from the first wave of the data collection, with comparisons of high potential with lifestyle firms. We expect to see owing to greater resource requirements and higher risk profiles, more use of venture capital and angel investment, and more internationalisation activity to assist in recouping investment and to overcome Australia's smaller economic markets Methodology/Key Propositions In order to develop the samples of 'high potential' in the NF and YF categories a set of qualification criteria were developed. Specifically, to qualify, firms as nascent or young high potentials, we used multiple, partly compensating screening criteria related to the human capital and aspirations of the founders as well as the novelty of the venture idea, and venture high technology. A variety of techniques were also employed to develop a multi level dataset of sources to develop leads and firm details. A dataset was generated from a variety of websites including major stakeholders including the Federal and State Governments, Australian Chamber of Commerce, University Commercialisation Offices, Patent and Trademark Attorneys, Government Awards and Industry Awards in Entrepreneurship and Innovation, Industry lead associations, Venture Capital Association, Innovation directories including Australian Technology Showcase, Business and Entrepreneurs Magazines including BRW and Anthill. In total, over 480 industry, association, government and award sources were generated in this process. Of these, 74 discrete sources generated high potentials that fufilled the criteria. 1116 firms were contacted as high potential cases. 331 cases agreed to participate in the screener, with 279 firms (134 nascents, and 140 young firms) successfully passing the high potential criteria. 222 Firms (108 Nascents and 113 Young firms) completed the full interview. For the general sample CAUSEE conducts screening phone interviews with a very large number of adult members of households randomly selected through random digit dialing using screening questions which determine whether respondents qualify as 'nascent entrepreneurs'. CAUSEE additionally targets 'young firms' those that commenced trading from 2004 or later. This process yielded 977 Nascent Firms (3.4%) and 1,011 Young Firms (3.6%). These were directed to the full length interview (40-60 minutes) either directly following the screener or later by appointment. The full length interviews were completed by 594 NF and 514 YF cases. These are the cases we will use in the comparative analysis in this report. Results and Implications The results for this paper are based on Wave one of the survey which has been completed and the data obtained. It is expected that the findings will assist in beginning to develop an understanding of high potential nascent and young firms in Australia, how they differ from the larger lifestyle entrepreneur group that makes up the vast majority of the new firms created each year, and the elements that may contribute to turning high potential growth status into high growth realities. The results have implications for Government in the design of better conditions for the creation of new business, firms who assist high potentials in developing better advice programs in line with a better understanding of their needs and requirements, individuals who may be considering becoming entrepreneurs in high potential arenas and existing entrepreneurs make better decisions.