Drilling damage in composite material

The characteristics of carbon fibre reinforced laminates have widened their use from aerospace to domestic appliances, and new possibilities for their usage emerge almost daily. In many of the possible applications, the laminates need to be drilled for assembly purposes. It is known that a drilling process that reduces the drill thrust force can decrease the risk of delamination. In this work, damage assessment methods based on data extracted from radiographic images are compared and correlated with mechanical test results—bearing test and delamination onset test—and analytical models. The results demonstrate the importance of an adequate selection of drilling tools and machining parameters to extend the life cycle of these laminates as a consequence of enhanced reliability.

Visual function assessment in medical imaging research

Background - Medical image perception research relies on visual data to study the diagnostic relationship between observers and medical images. A consistent method to assess visual function for participants in medical imaging research has not been developed and represents a significant gap in existing research. Methods - Three visual assessment factors appropriate to observer studies were identified: visual acuity, contrast sensitivity, and stereopsis. A test was designed for each, and 30 radiography observers (mean age 31.6 years) participated in each test. Results - Mean binocular visual acuity for distance was 20/14 for all observers. The difference between observers who did and did not use corrective lenses was not statistically significant (P = .12). All subjects had a normal value for near visual acuity and stereoacuity. Contrast sensitivity was better than population norms. Conclusion - All observers had normal visual function and could participate in medical imaging visual analysis studies. Protocols of evaluation and populations norms are provided. Further studies are necessary to understand fully the relationship between visual performance on tests and diagnostic accuracy in practice.

Tuberculosis in patients with chronic renal failure

Nine cases of tuberculosis (TB) were diagnosed among 800 uremic patients, followed-up during 11 years, a prevalence of 1125%, 2.5 times higher than that in the general population. Six patients (66.7%) had lymph node involvement (4 cervical and 2 mediastinal). Three patients (33.3%) had pulmonary involvement (2 pleuro-pulmonary and 1 bilateral apical pulmonary). Eight patients were undergoing dialysis and 1 was pre-dialytic. The duration of dialysis ranged from 1 to 60 months. Three patients had previously received immunosuppressive drugs for unsuccessful renal transplantation. Daily fever was present in all but one patient; he was asymptomatic and TB was suspected after routine chest radiography. Biopsy was the diagnostic procedure in 7 patients (77.8%), four by direct cervical lymph node biopsy, 2 by mediastinal, performed by mediastinoscopy and 1 by pleural biopsy. In 2 other patients TB was confirmed by the presence of tubercle bacilli; in sputum (1 patient) and in a bronchial flushing specimen (the other patient). Triple therapy was used in all patients (isoniazid and ethambutol in all), plus rifampicin in 8 and streptomycin in 1. One patient had jaundice and another had optical neuritis. Five patients were cured. The other four died during treatment of causes unrelated to TB or its treatment.

10 kVp rule - An anthropomorphic pelvis phantom imaging study using a CR system: impact on image quality and effective dose using AEC and manual mode

Purpose: This study aims to investigate the influence of tube potential (kVp) variation in relation to perceptual image quality and effective dose for pelvis using automatic exposure control (AEC) and non-AEC in a computed radiography (CR) system. Methods and Materials: To determine the effects of using AEC and non-AEC by applying the 10 kVp rule in two experiments using an anthropomorphic pelvis phantom. Images were acquired using 10 kVp increments (60-120 kVp) for both experiments. The first experiment, based on seven AEC combinations, produced 49 images. The mean mAs from each kVp increment were used as a baseline for the second experiment producing 35 images. A total of 84 images were produced and a panel of 5 experienced observers participated for the image scoring using the 2 AFC visual grading software. PCXMC software was used to estimate the effective dose. Results: A decrease in perceptual image quality as the kVp increases was observed both in non-AEC and AEC experiments, however no significant statistical differences (p> 0.05) were found. Image quality scores from all observers at 10 kVp increments for all mAs values using non-AEC mode demonstrates a better score up to 90 kVp. Effective dose results show a statistical significant decrease (p=0.000) on the 75th quartile from 0.3 mSv at 60 kVp to 0.1 mSv at 120 kVp when applying the 10 kVp rule in non-AEC mode. Conclusion: No significant reduction in perceptual image quality is observed when increasing kVp whilst a marked and significant effective dose reduction is observed.

A hybrid procedure to identify the optimal stiffness coefficients of elastically restrained beams

The formulation of a bending vibration problem of an elastically restrained Bernoulli-Euler beam carrying a finite number of concentrated elements along its length is presented. In this study, the authors exploit the application of the differential evolution optimization technique to identify the torsional stiffness properties of the elastic supports of a Bernoulli-Euler beam. This hybrid strategy allows the determination of the natural frequencies and mode shapes of continuous beams, taking into account the effect of attached concentrated masses and rotational inertias, followed by a reconciliation step between the theoretical model results and the experimental ones. The proposed optimal identification of the elastic support parameters is computationally demanding if the exact eigenproblem solving is considered. Hence, the use of a Gaussian process regression as a meta-model is addressed. An experimental application is used in order to assess the accuracy of the estimated parameters throughout the comparison of the experimentally obtained natural frequency, from impact tests, and the correspondent computed eigenfrequency.

Study of a 9th century silver earrings set from Mikulčice: corrosion, conservation and maintenance

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Conservação e Restauro

A influência dos fileres no comportamento viscoso dos mastiques betuminosos

As estradas têm vindo a sofrer um aumento de importância, sendo necessário aplicar pavimentos com melhores características, assim foram desenvolvidos os mastiques betuminosos. Os mastiques são misturas de betume com filer, este material tem propriedades melhoradas em relação ao betume puro. O betume é um material viscoelástico, o que leva a que a viscosidade seja uma propriedade de vital importância estudar. A junção de fileres ao betume promove um aumento de viscosidade, levando a que esta propriedade reológica tenha ainda mais importância, principalmente porque a trabalhabilidade da mistura betuminosa fica comprometida quando a viscosidade não é a correta. Na realização desta dissertação foram realizados ensaios em mastiques betuminosos, com recurso ao viscosímetro rotativo de Brookfield. Os mastiques ensaiados são compostos com fileres de diferentes origens e com diferentes taxas de incorporação, e assim foram analisadas as diferenças obtidas nos valores da viscosidade dinâmica. Os resultados obtidos mostram que os mastiques, à temperatura de fabrico, têm um comportamento viscoso idêntico ao comportamento viscoso do betume puro. Apesar dos mastiques produzidos terem uma viscosidade maior que a do betume puro, o valor desta propriedade reológica tende a igualar ao valor do betume, este comportamento observa-se nas temperaturas mais elevadas. Quando se examinam os resultados dos mastiques produzidos com menor quantidade de filer, na generalidade, os valores da viscosidade obtidos são idênticos. Para taxas de incorporação maiores, os valores da viscosidade dinâmica dos mastiques produzidos são bastante mais altos e distintos. Levando a concluir que quanto maior a percentagem de filer no mastique, maior o valor da viscosidade e maior dispersão dos resultados obtidos, isto para os fileres e taxas de incorporação testadas.

Hand Involvement in Ollier Disease and Maffucci Syndrome: a Case Series

Ollier Disease and Maffucci Syndrome are two rare diseases that can cause tumors in several organs, having a special predilection for the hand. However, there have been very few reports in the literature focusing on hand manifestations of these diseases. We report the cases of three female patients: one with Ollier Disease, and two other with Maffucci Syndrome. All patients had hand involvement as their initial primary complaint. The Ollier Disease patient developed chondrosarcomas of two digits and had to have these fingers amputated. One of the Maffucci patients died one year after presentation from a brain glioblastoma. These cases emphasize the importance of early diagnosis of Ollier Disease and Maffucci Syndrome, as these two conditions are associated not only to crippling hand deformity, but also to a significant risk of chondrosarcoma, and other malignant tumors.

Paracoccidioidomycosis in organ transplant recipient: case report

Paracoccidioidomycosis is a common disease in Latin America but it is rare in organ transplant recipient patients. We report on a case of such mycosis in a renal transplant recipient. The patient presented with a large lung cavity on the left lower lobe, a rare radiological presentation of paracoccidioidomycosis. Unusual clinical and radiological manifestations of Paracoccidioides brasiliensis infection can occur in immunocompromised patients.

Primary pulmonary AIDS-related lymphoma

Extranodal involvement is common in lymphomas associated with human immunodeficiency virus infection (HIV) and acquired immunodeficiency syndrome (AIDS). However, primary pulmonary AIDS-related non-Hodgkin's lymphoma is very rare and only few reports were published in the medical literature. Clinical presentation is nonspecific, with "B" and respiratory symptoms. Also, patients were with advanced immunodeficiency at the time of diagnosis. Generally, chest radiography showed peripheral nodules or cavitary masses. Primary pulmonary lymphoma associated with AIDS is generally a high-grade B-cell non-Hodgkin lymphoma and Epstein-Barr virus is strongly associated with the pathogenesis of these tumors. We report a patient with AIDS and primary pulmonary lymphoma which clinical presentation was a total atelectasis of the left lung.

Estudo e Projeto de uma variante urbana no Concelho de Cinfães

A criação de infraestruturas passa pela construção de estradas que ligam pontos estratégicos, permitindo acesso a bens e serviços, de forma cómoda e segura. No desenvolvimento deste trabalho é abordado o estudo e projeto de uma variante urbana no concelho de Cinfães, nas especificidades de traçado, pavimentos e sinalização. Inicia-se por uma apresentação sobre o trabalho, os objetivos, estrutura e metodologia utilizada na sua elaboração. São apresentados os softwares utilizados, como editores de imagem (Google Earth, Microsoft ICE e Caesium) que permitem obter e trabalhar imagens panorâmicas, o Civil 3D que possibilita a realização ágil de um projeto de vias, e o Alize-LCPC que determina as caraterísticas de dimensionamento de um pavimento flexível. São apresentados os estudos necessários para a construção da variante em questão passando pela localização da via, o trabalho sobre o levantamento topográfico fornecido pela Câmara Municipal, condicionantes de traçado e serviços afetados. Posteriormente, são abordados alguns conceitos teóricos como geometria do traçado, velocidade, tráfego e visibilidade. Descrevem-se as caraterísticas geométricas de infraestruturas rodoviárias a conhecer anteriormente à realização de um projeto de execução de uma via, como o traçado em planta (alinhamentos retos, curvas, raios, sobreelevação, sobrelargura), perfil longitudinal (trainéis, inclinações, concordâncias verticais) e perfil transversal (faixa de rodagem, bermas, valetas e taludes). É realizada ainda uma apresentação sobre os elementos integrantes de uma plataforma rodoviária e passeio, os seus critérios de dimensionamento, como caraterização do tráfego, temperaturas de serviço e deformações, assim como os elementos teóricos para o estudo de drenagem (período de retorno, precipitação e tipos de dispositivos). São ainda apresentadas as caraterísticas gerais de um projeto de sinalização e segurança, enunciando as marcas rodoviárias e a sinalização vertical. Termina-se apresentando as soluções encontradas e os meios utilizados, para a elaboração do projeto de uma via nova, alargamento de via existente e requalificação de pavimento de um troço de ligação à EN222, expondo ainda as conclusões obtidas na realização do projeto com propostas para desenvolvimento futuros.

Damage assessment of fibre reinforced laminates

The use of solid wastes and natural fibres to the production of innovative composites is now a matter of environmental need. A set of hybrid composites constituted of waste rubber particles and sugarcane bagasse fibres into a thermoset composite material are drilled to determine the effect of rubber particle addition and size, sugarcane fibre addition and length and fibre chemical treatment on damage extension and related mechanical properties. Damage extension is determined by enhanced radiography for further damage measurement – diameter and areas – and correlated with mechanical test results — bearing test. The results demonstrated significant effect of the rubber and fibre additions on mechanical properties of the composites.

Oral cavity eumycetoma

Mycetoma is a pathological process in which eumycotic (fungal) or actinomycotic causative agents from exogenous source produce grains. It is a localized chronic and deforming infectious disease of subcutaneous tissue, skin and bones. We report the first case of eumycetoma of the oral cavity in world literature. CASE REPORT: A 43-year-old male patient, complaining of swelling and fistula in the hard palate. On examination, swelling of the anterior and middle hard palate, with fistula draining a dark liquid was observed. The panoramic radiograph showed extensive radiolucent area involving the region of teeth 21-26 and the computerized tomography showed communication with the nasal cavity, suggesting the diagnosis of periapical cyst. Surgery was performed to remove the lesion. Histopathological examination revealed purulent material with characteristic grain. Gram staining for bacteria was negative and Grocott-Gomori staining for the detection of fungi was positive, concluding the diagnosis of eumycetoma. The patient was treated with ketoconazole for nine months, and was considered cured at the end of treatment. CONCLUSION: Histopathological examination, using histochemical staining, and direct microscopic grains examination can provide the distinction between eumycetoma and actinomycetoma accurately.

Estudo da Delaminação em Compósitos de Epóxido Reforçado com Borracha e Fibras Naturais

Nos últimos anos, a utilização dos materiais compósitos tem vindo a tornar-se cada vez mais comum em várias indústrias, onde se verifica uma ascensão na procura pelos mesmos. Características como o baixo peso aliado à sua alta resistência e rigidez permitem que estes materiais possuam diversas aplicações em variadas áreas, desde a medicina, aeronáutica, indústria automóvel e aeroespacial, até à indústria eletrónica. Hoje em dia, o uso de desperdícios sólidos de borracha e fibras naturais na produção de materiais compósitos é, mais que uma opção, uma necessidade ambiental. De forma a reduzir as enormes quantidades de desperdícios, foi criado um material compósito constituído por uma resina termoendurecível reforçada com esses dois tipos de desperdícios. Parâmetros de fabrico como a percentagem de borracha, o tamanho das partículas de borracha, a percentagem de fibras de cana-de-açúcar e o comprimento dessas fibras foram variados, com o objetivo de estudar a influência destes dois materiais nas propriedades mecânicas do compósito. Apesar da maior parte dos compósitos serem fabricados na forma de uma peça funcional quase pronta a ser utilizada, por vezes é necessário recorrer à maquinação de furos. Apesar das muitas técnicas de furação existentes, os defeitos resultantes deste processo aplicado aos materiais compósitos são ainda muito comuns. Desses defeitos o que mais se destaca é sem dúvida a delaminação. Trinta e seis provetes de epóxido reforçado com borracha e fibra de cana-de-açúcar foram fabricados e furados, de modo a possibilitar o estudo das propriedades mecânicas do material compósito, assim como a análise da zona danificada durante a furação. Diferentes condições de furação, como tipos de broca e velocidades de avanço diferentes, foram impostas aos provetes de forma a variar o mais possível a zona de dano de uns furos para os outros. Parâmetros como a área de dano ou ainda o fator de delaminação provam ser muito úteis na caracterização e quantificação do dano na zona periférica de um furo. Recorrendo a técnicas de processamento de imagem foi possível obter esses parâmetros. O processamento e análise de imagem pode ser feito através de vários métodos. O método utilizado neste trabalho foi o software MATLAB® associado a ferramentas de processamento de imagem. Depois de feita a análise dos furos foram realizados ensaios de esmagamento a todos os provetes. Este passo permitiu assim avaliar de que forma os parâmetros de furação influenciam a resistência mecânica do material, e se a avaliação realizada aos furos é um método viável para a avaliação da extensão de dano nesses furos.