Functionalization of carbon nanotubes using aminobenzene acids and electrochemical methods. Electroactivity for the oxygen reduction reaction

Functionalized carbon nanotubes (CNTs) using three aminobenzene acids with different functional groups (carboxylic, sulphonic, phosphonic) in para position have been synthesized through potentiodynamic treatment in acid media under oxidative conditions. A noticeable increase in the capacitance for the functionalized carbon nanotubes mainly due to redox processes points out the formation of an electroactive polymer thin film on the CNTs surface along with covalently bonded functionalities. The CNTs functionalized using aminobenzoic acid rendered the highest capacitance values and surface nitrogen content, while the presence of sulfur and/or phosphorus groups in the aminobenzene structure yielded a lower functionalization degree. The oxygen reduction reaction (ORR) activity of the functionalized samples was similar to that of the parent CNTs, independently of the functional group present in the aminobenzene acid. Interestingly, a heat treatment in N2 atmosphere with a very low O2 concentration (3125 ppm) at 800 °C of the CNTs functionalized with aminobenzoic acid produced a material with high amounts of surface oxygen and nitrogen groups (12 and 4% at., respectively), that seem to modulate the electron-donor properties of the resulting material. The onset potential and limiting current for ORR was enhanced for this material. These are promising results that validates the use of electrochemistry for the synthesis of novel N-doped electrocatalysts for ORR in combination with adequate heat treatments.

Successful functionalization of superporous zeolite templated carbon using aminobenzene acids and electrochemical methods

A novel and selective electrochemical functionalization of a highly reactive superporous zeolite templated carbon (ZTC) with two different aminobenzene acids (2-aminobenzoic and 4-aminobenzoic acid) was achieved. The functionalization was done through potentiodynamic treatment in acid media under oxidative conditions, which were optimized to preserve the unique ZTC structure. Interestingly, it was possible to avoid the electrochemical oxidation of the highly reactive ZTC structure by controlling the potential limit of the potentiodynamic experiment in presence of aminobenzene acids. The electrochemical characterization demonstrated the formation of polymer chains along with covalently bonded functionalities to the ZTC surface. The functionalized ZTCs showed several redox processes, producing a capacitance increase in both basic and acid media. The rate performance showed that the capacitance increase is retained at scan rates as high as 100 mV s−1, indicating that there is a fast charge transfer between the polymer chains formed inside the ZTC porosity or the new surface functionalities and the ZTC itself. The success of the proposed approach was also confirmed by using other characterization techniques, which confirmed the presence of different nitrogen groups in the ZTC surface. This promising method could be used to achieve highly selective functionalization of highly porous carbon materials.

Performance Assessment of a Polymer Electrolyte Membrane Electrochemical Reactor under Alkaline Conditions – A Case Study with the Electrooxidation of Alcohols

A novel polymer electrolyte membrane electrochemical reactor (PEMER) configuration has been employed for the direct electrooxidation of propargyl alcohol (PGA), a model primary alcohol, towards its carboxylic acid derivatives in alkaline medium. The PEMER configuration comprised of an anode and cathode based on nanoparticulate Ni and Pt electrocatalysts, respectively, supported on carbonaceous substrates. The electrooxidation of PGA was performed in 1.0 M NaOH, where a cathode based on a gas diffusion electrode was manufactured for the reduction of oxygen in alkaline conditions. The performance of a novel alkaline anion-exchange membrane based on Chitosan (CS) and Poly(vinyl) alcohol (PVA) in a 50:50 composition ratio doped with a 5 wt.% of poly (4-vinylpyridine) organic ionomer cross-linked, methyl chloride quaternary salt resin (4VP) was assessed as solid polymer electrolyte. The influence of 4VP anionic ionomer loading of 7, 12 and 20 wt.% incorporated into the electrocatalytic layers was examined by SEM and cyclic voltammetry (CV) upon the optimisation of the electroactive area, the mechanical stability and cohesion of the catalytic ink onto the carbonaceous substrate for both electrodes. The performance of the 4VP/CS:PVA membrane was compared with the commercial alkaline anion-exchange membrane FAA −a membrane generally used in direct alcohol alkaline fuel cells- in terms of polarisation plots in alkaline conditions. Furthermore, preparative electrolyses of the electrooxidation of PGA was performed under alkaline conditions of 1 M NaOH at constant current density of 20 mA cm−2 using a PEMER configuration to provide proof of the principle of the feasibility of the electrooxidation of other alcohols in alkaline media. PGA conversion to Z isomers of 3-(2-propynoxy)-2-propenoic acid (Z-PPA) was circa 0.77, with average current efficiency of 0.32. Alkaline stability of the membranes within the PEMER configuration was finally evaluated after the electrooxidation of PGA.

Saving Libya from itself: What the EU should do now. CEPS Commentary, 1 December 2014

Libya is experiencing its worst security crisis since the 2011 revolution, the intervention by NATO and the overthrow of Colonel Muammar Gaddafi. While the parliamentary elections of July 2012 provided “an opportunity to put the transition process back on track and overcome the recent political polarisation”, the country has instead descended into a deadly vortex of conflicting political groups, militias and tribes. Without the international political attention that is needed to save it from itself, Libya is now breaking up in at least two parts. Each faction is under pressure to declare its allegiance to the two biggest rival coalitions: either ‘Libyan Dignity’ or ‘Libyan Dawn’. The authors suggest that EU action take place on three levels.

What scenarios for the Euro-Mediterranean in 2030 in the wake of the Arab spring? MEDPRO Policy Paper No. 2, October 2011 (Updated 25 February 2013)

In the wake of the Arab Spring, the Southern Mediterranean region has reached a turning point in its history, presenting many opportunities and challenges for the EU. In this MEDPRO Policy Paper, Rym Ayadi and Carlo Sessa explore various possible scenarios that could play out in EU-Mediterranean relations over the next two decades but find, lamentably, that the EU has set itself on a ‘business as usual’ course, leaving the region open to further polarisation and the involvement of other external players.

Poor and under pressure: the social impact of Europe's fiscal consolidation. Bruegel Policy Contribution, Issue 2015/04, March 2015

Europe faces major challenges related to poverty, unemployment and polarisation between the south and the north, which impact adversely the current living conditions of many citizens, and also negatively impact medium- and long-term economic growth. Fiscal consolidation exaggerated social hardship. In vulnerable countries there was no alternative to fiscal consolidation, but in most EU countries and at aggregate EU level, consolidation was premature when the cyclical position of the economy was deteriorating. Spending on social protection was shielded relative to other spending categories, but public bank rescue costs were high. While the changes in the tax mix favoured job creation, the overall tax burden become more regressive. There is an increasing generational divide between the elderly and the young in terms of social indicators. Social spending on elderly people was favoured relative to spending on families, children and education. There is now a serious danger that a lost generation might develop in several member states. Forceful policies should include bold structural reforms, better use of the European economic governance framework, more demand promotion, and a revision of national tax/benefit systems for fair burden sharing between the wealthy and poor.

What direction for Turkey? A plea for political reconciliation. EPIN Commentary No. 26/14 October 2015

Even before the recent terrorist attacks in Ankara, Turkey was a country in crisis. In this EPIN Commentary Umut Uzer attempts to shed light on the political turbulence and increasing polarisation in the country, and makes a plea for a return to consensus-building ahead of the fresh round of elections in November. The author also calls upon the EU to offer incentives to Turkey to continue on the path of EU membership, but if membership is out of the question, then other platforms for cooperation should be negotiated. The EU should speak in a candid manner and make clear what kind of future relationship it envisages for Turkey, because now, more than ever, cooperation is in both their interests.

A constitution for Erdoğan. Consequences of the political conflict in Turkey. OSW COMMENTARY No. 213, 2016-06-01

Since mid-2015 Turkey has been affected by a deep internal crisis, caused by rising political polarisation, increased levels of terrorist threat (posed by the Kurds and Islamic radicals) and the revived conflict with the Kurdistan Workers’ Party (PKK). As a consequence of this crisis, over 350,000 residents of south-eastern Turkey have been forced to leave their homes. At the same time, due to the migration crisis and despite mutual distrust in relations between Turkey and the EU, cooperation between Ankara and Brussels has been intensifying. Turkey’s ongoing destabilisation does not challenge the status of the ruling Justice and Development Party (AKP), which is de facto controlled by President Recep Tayyip Erdoğan; paradoxically, it strengthens the party. The internal crisis which the authorities have been deliberately fuelling is an element of a plan to rubber-stamp political change by introducing a presidential system of government. This is happening amid a thorough reconstruction of the socio-political order which has been underway for over a decade. In the upcoming months it is expected to result in the constitution being changed and, as a consequence, the institutionalisation of Erdoğan’s autocratic rule.

Sedimentological, mineralogical, biogeochemical and micropaleontological parameters on sediment core PS69/849-2, Burton Basin, MacRobertson Shelf, East Antarctica

A multi-proxy study including sedimentological, mineralogical, biogeochemical and micropaleontological methods was conducted on sediment core PS69/849-2 retrieved from Burton Basin, MacRobertson Shelf, East Antarctica. The goal of this study was to depict the deglacial and Holocene environmental history of the MacRobertson Land-Prydz Bay region. A special focus was put on the timing of ice-sheet retreat and the variability of bottom-water formation due to sea ice formation through the Holocene. Results from site PS69/849-2 provide the first paleo-environmental record of Holocene variations in bottom-water production probably associated to the Cape Darnley polynya, which is the second largest polynya in the Antarctic. Methods included end-member modeling of laser-derived high-resolution grain size data to reconstruct the depositional regimes and bottom-water activity. The provenance of current-derived and ice-transported material was reconstructed using clay-mineral and heavy-mineral analysis. Conclusions on biogenic production were drawn by determination of biogenic opal and total organic carbon. It was found that the ice shelf front started to retreat from the site around 12.8 ka BP. This coincides with results from other records in Prydz Bay and suggests warming during the early Holocene optimum next to global sea level rise as the main trigger. Ice-rafted debris was then supplied to the site until 5.5 cal. ka BP, when Holocene global sea level rise stabilized and glacial isostatic rebound on MacRobertson Land commenced. Throughout the Holocene, three episodes of enhanced bottom-water activity probably due to elevated brine rejection in Cape Darnley polynya occured between 11.5 and 9 cal. ka BP, 5.6 and 4.5 cal. ka BP and since 1.5 cal. ka BP. These periods are related to shifts from warmer to cooler conditions at the end of Holocene warm periods, in particular the early Holocene optimum, the mid-Holocene warm period and at the beginning of the neoglacial. In contrast, between 7.7 and 6.7 cal. ka BP, brine rejection shut down, maybe owed to warm conditions and pronounced open-water intervals.

Electrochemical corrosion of unalloyed copper in chloride media–a critical review

The literature dealing with the electrochemical corrosion characteristics of unalloyed copper in aqueous chloride media is examined. The enormous quantity of polarisation and mixed/corrosion potential data that has been made available in the literature over the last 50 years has been compiled and discussed in a comprehensive review. For a wide range of electrode geometries, the importance of the chloride ion and the mass transport of anodic corrosion products on the corrosion behaviour of copper are made clear for both freshly polished and 'filmed' surfaces. (C) 2003 Elsevier Ltd. All rights reserved.

Neoliberalism, individualisation and community: Regional restructuring in Australia

Since the early 1980s, Australian governments have embraced neoliberal policies as a means of improving the nation’s global economic competitiveness. The impacts of such policies in regional areas have been quite profound, leading to socio-economic polarisation, population loss, and the growth of anti-globalisation sentiments. In this paper, we examine the process of regional restructuring that arises from this trajectory in Australia, and examine current policy responses to change under the neoliberal regime. We argue that while many such responses are individualistic, and based upon policies of personal responsibility, self-advancement and entrepreneurship, others are imbued with the language of community, social capital and collective action. The existence of individualism and community within the same policy agenda may appear contradictory, yet it is suggested that neoliberalism brings together these two opposing discourses through a process of what Nikolas Rose calls ‘governing through community’. We explore how neoliberalism underpins community approaches to regional development in Australia, arguing that such strategies do little to counter the negative forces of globalisation in non-metropolitan parts of the country.

Improved corrosion resistance of AZ91D magnesium alloy by an aluminium-alloyed coating

An aluminum-alloyed coating was applied onto the surface of magnesium alloy AZ91D. The coating formed in aluminium powder at 420 degrees C is rich in the beta (Mg17Al12) phase. Polarisation curve, AC impedance, salt immersion and salt spray were carried out to investigate the corrosion behaviour and assess the corrosion performance of the coated magnesium alloy. It was found that a coated AZ91D specimen was much more corrosion resistant and harder than an uncoated one. The improved corrosion resistance was mainly ascribed to the high volume fraction of beta phase in the coating. (c) 2004 Elsevier B.V. All rights reserved.

Erosion-corrosion of mild steel in hot caustic. Part I: NaOH solution

A novel apparatus, high-pressure/high-temperature nickel flow loop, was constructed to study the effect of the flow on the rate of erosion-corrosion of mild steel in hot caustic. It has been successfully used to measure the corrosion rate of 1020 steel in 2.75 M NaOH solution at a temperature of 160 degrees C and velocities of 0.32 and 2.5 m/s. In situ electrochemical methods were used to measure the corrosion rate such as the potentiodynamic sweep, the polarization resistance method, and electrochemical impedance spectroscopy (EIS). Also used were the weight-loss method and scanning electron microscopy (SEM). Eight electrodes/coupons were used to monitor the metal loss rate, four were placed at the low velocity section, while the other four were placed in the high velocity section. The first three coupons in each section were placed within the disturbed flow region, while the fourth was placed in a fully developed flow region. The corrosion rate of the coupons in the high velocity section was generally higher than that of the coupons in the low velocity section. One coupon in the disturbed flow region had a significantly higher corrosion rate than the others. (c) 2005 Elsevier Ltd. All rights reserved.

Erosion-corrosion of mild steel in hot caustic. Part II: The effect of acid cleaning

Corrosion rates of 1020 steel in 2.75 M NaOH solution at a temperature of 160 degrees C and velocities of 0.32 and 2.5 m/s were studied. The focus was on the effect of the acid cleaning which was performed by using strong, inhibited sulphuric acid in between the exposures to caustic. In situ electrochemical methods were used to measure the corrosion rate such as the potentiodynamic sweep and the polarization resistance method. Also used were the weight-loss method and scanning electron microscopy (SEM). Eight electrodes/coupons were used to monitor the metal loss rate, four were placed at the low velocity section, while the other four were placed in the high velocity section of a high temperature flow. The first three coupons in each section were placed within the disturbed flow region, while the fourth was placed in a fully developed flow region. During the exposure of mild steel to the inhibited acid, following the first caustic period, the corrosion rate increased significantly to between 3 and 10mm/y with a few electrodes experiencing as high as 50 mm/y. The second caustic period following the acidic period typically started with very high corrosion rates (20-80 mm/y). The length of this corrosion period was typically 2-3 h with a few exceptions when the high corrosion period lasted 7-10 h. Following the very high corrosion rates experienced at the beginning of the second caustic period, the corrosion rates were reduced sharply (as the corrosion potential increased) to nearly the same levels as those observed during the passive part of the first caustic period. (c) 2005 Elsevier Ltd. All rights reserved.

A dual band 2.4/5.2GHz antenna including a radial line slot array and a patch

The design of an antenna that combines a radial line slot array and a circular patch to operate as a dual band (2.4/5.2 GHz) antenna at the access point of a WLAN is presented. The design has been accomplished using commercially available Ansoft HFSS and in-house developed software. The designed antenna shows good performance in terms of return losses, radiation pattern and circular polarization in the two, 2.4 and 5.2 GHz, frequency bands. Due to its good electrical performance and a relatively low profile and low developmental cost, it should be found attractive for use as an access point antenna for dual band operation.