Effects of Microstructural Heterogeneity on The Spallation Behavior of Materials

It is of utmost importance to understand the spallation behaviour of heterogeneous materials. In this paper, a driven nonlinear threshold model with stress fluctuation is presented to study the effects of microstructural heterogeneity on continuum damage evolution. The spallation behavior of heterogeneity material is analyzed with this model. The heterogeniety of mesoscopic units is characterized in terms of Weibull modulus m of strength distibution and stress fluctuation parameter k. At high stress, the maximum damage increases with m; while at low stress, the maximum damage decreases. In addition, for low stress, severe stress fluctuation causes higher damage; while for high stress, causes lower damage.

The Geo-DSCM System and Its Application to the Deformation Measurement of Rock Materials

Digital Speckle Correlation Method (DSCM) is a useful tool for whole field deformation measurement, and has been applied to analyze the deformation field of rock materials in recent years. In this paper, a Geo-DSCM system is designed and used to analyse the more complicated problems of rock mechanics, such as damage evolution and failure procedure. A weighted correlation equation is proposed to improve the accuracy of displacement measurement on a heterogeneous deformation field. In addition, a data acquisition system is described that can synchronize with the test machine and can capture speckle image at various speeds during experiment. For verification of the Geo-DSCM system, the failure procedure of a borehole rock structure is inspected and the evolution of the deformation localization is analysed. It is shown that the deformation localization generally initializes at the vulnerable area of the rock structure but may develop in a very complicated way.

Multiphase Flow Measurement in the Offshore Oil Industry

In recent years, considerable research has been conducted into the development of a three-phase flowmeter suitable for use in an offshore environment, and oil/gas/water three-phase metering becomes an important aspect in multiphase flow measurement. This paper discusses the importance of three-phase flow measurement in offshore oil industry, describes the current development in this area, and points out the principal strategies which may be used to meter three-phase flow.

Study of the damage-induced anisotropy of quasi-brittle materials using the component assembling model

Damage-induced anisotropy of quasi-brittle materials is investigated using component assembling model in this study. Damage-induced anisotropy is one significant character of quasi-brittle materials coupled with nonlinearity and strain softening. Formulation of such complicated phenomena is a difficult problem till now. The present model is based on the component assembling concept, where constitutive equations of materials are formed by means of assembling two kinds of components' response functions. These two kinds of components, orientational and volumetric ones, are abstracted based on pair-functional potentials and the Cauchy - Born rule. Moreover, macroscopic damage of quasi-brittle materials can be reflected by stiffness changing of orientational components, which represent grouped atomic bonds along discrete directions. Simultaneously, anisotropic characters are captured by the naturally directional property of the orientational component. Initial damage surface in the axial-shear stress space is calculated and analyzed. Furthermore, the anisotropic quasi-brittle damage behaviors of concrete under uniaxial, proportional, and nonproportional combined loading are analyzed to elucidate the utility and limitations of the present damage model. The numerical results show good agreement with the experimental data and predicted results of the classical anisotropic damage models.

Processing and characterization of soy protein-based materials

Las proteínas son biopolímeros con potenciales propiedades para aplicaciones en el campo de envases por su capacidad para formar films con buenas propiedades barrera en condiciones secas. Además, al ser biodegradables y provenir de recursos renovables, ofrecen importantes ventajas desde el punto de vista medioambiental y económico. Sin embargo, los films basados en proteínas son frágiles y presentan una baja resistencia a la humedad, por lo que se requiere su modificación para fabricar materiales útiles en las condiciones de servicio.El objetivo de esta tesis es reducir la absorción de humedad y simultáneamente mejorar las propiedades mecánicas de los materiales fabricados con proteína de soja. Para ello es necesaria la adición de sustancias que puedan interaccionar con los grupos polares de la proteína, reduciendo así su carácter hidrofílico y la absorción de humedad, y que a la vez puedan actuar como plastificantes, reduciendo la fragilidad del material fabricado. Además, las condiciones de procesado también influyen en las propiedades del material, por tanto, la optimización del procesado es otro de los objetivos de la tesis.Para poder conseguir la mejora de las propiedades del material y, en concreto, aquellas requeridas por el sector del envase, como son las propiedades mecánicas y la resistencia a la humedad, la tesis se ha centrado en tres áreas: plastificación por adición de glicerol; mezclado con sustancias naturales como gelatinas, ácidos, aceites y azúcares; y procesado por los métodos húmedo y seco.