Probing the electronic delocalization in a cyclic pyrazine ruthenium cluster hexamer

[Ru(3)O(CH(3)COO)(6)(pz)(CO)](6) is a cyclic hexamer species encompassing six triangular ruthenium cluster centers bridged by pyrazine ligands. The electronic communication among the cluster units strongly depends on their oxidation states, and has been successfully probed by means of cyclic voltammetry and UV-vis spectroelectrochemistry. (C) 2010 Elsevier B.V. All rights reserved.

Mutagenic activity removal of selected disperse dye by photoeletrocatalytic treatment

The degradation of black dye commercial product (BDCP) composed of C.I. Disperse Blue 373, C.I. Disperse Orange 37, C.I. Disperse Violet 93 dyes was investigated by photoelectrocatalysis process. The dyes have shown high mutagenic activity with Salmonella strain YG1041 and TA98 with and without S9. Samples of BCPD dye submitted to conventional chlorination and photoelectrocatalytic oxidation were compared monitoring its products by HPLC using a diode array detector, spectrophotometry UV-vis, TOC removal, and mutagenicity potency. The photoelectrocatalytic method operating with Ti/TiO(2) as anode at +1.0 V and UV illumination presented fast oxidation of test solutions containing 10 mg L(-1) of dye in 0.1 mol L(-1) NaCl pH 4.0 leading to 100% of discoloration, 67% of mineralization, and negative response to all tested Salmonella strains. The formation of Cl(aEuro cent), CL(2) (aEuro cent) on photoelectrocatalytic medium improved the efficiency of the method in relation to conventional chlorination method that promoted 100% of discoloration, but only 8% of TOC removal and more mutagenic product.

Synthesis and spectral investigation of Al(III) catechin/beta-cyclodextrin and Al(III) quercetin/beta-cyclodextrin inclusion compounds

Al-catechin/beta-cyclodextrin and Al-quercetin/beta-cyclodextrin (beta-CD) inclusion compounds were synthesized and characterized by IR, UV-vis, H-1 and C-13 NMR and TG and DTA analyses. Because quercetin is sparingly soluble in water, the stability constants of the Al-quercetin/beta-CD and Al-catechin/beta-CD compounds were determined by phase solubility studies. The A(L)-type diagrams indicated the formation of 1:1 inclusion compounds and allowed calculation of the stability constants. The thermodynamic parameters were obtained from the dependence of the stability constants on temperature and results indicated that the formation of the inclusion compounds is an enthalpically driven process. The thermal decomposition of the solid Al-quercetin/beta-CD and Al-catcchin/beta-CD inclusion compounds took place at different stages, compared with the respective precursors, proving that an inclusion complexation process really occurred. (C) 2007 Published by Elsevier B.V.

Carbamazepine oxidation catalyzed by iron and manganese porphyrins supported on aminofunctionalized matrices

This work describes the catalytic activity of manganese and iron porphyrins, Mn and Fe(TFPP)Cl, covalently immobilized on the aminofunctionalized supports montmorillonite K-10 (MontX) and silica (SilX), where X= 1 or 2 represents the length of the organic chain (""arms"") binding the metalloporphyrin to the support. These systems were characterized by UV-vis and Electronic Paramagnetic Resonance (EPR), and they were used as catalysts in the oxidation of carbamazepine (CBZ) by the oxidants iodosylbenzene (PhIO) and hydrogen peroxide. The manganese porphyrin (MnP) catalysts proved to be efficient and selective for the epoxide, the main CBZ metabolite in natural systems. MnMont1 was an excellent catalyst when PhIO was used as oxidant, even better than the same MnP in homogeneous system. Supports bearing short ""arms"" led to the best yields. Although H2O2 is an environmentally friendly oxidant, low product yields were obtained when it was employed in CBZ oxidation. Fe(TFPP)CI immobilized on aminofunctionalized supports was not an efficient catalyst, probably due to the presence of Fe(H) species in the matrix, which led to the less reactive intermediate PFe(IV)(O). (c) 2007 Elsevier B.V. All rights reserved.

An environmentally friendly triphasic catalytic system: Mn(salen) occluded in membranes based on PDMS/PVA

The commercially available Jacobsen catalyst, Mn(salen), was occluded in hybrid polymeric membranes based on poly(dimethylsiloxane) (PDMS) and poly(vinyl alcohol) (PVA). The obtained systems were characterized by UV-vis spectroscopy and SEM techniques. The membranes were used as a catalytic barrier between two different phases: an organic substrate phase (cyclooctene or styrene) in the absence of solvent, and an aqueous solution of either t-BuOOH or H(2)O(2). Membranes containing different percentages of PVA were prepared, in order to modulate their hydrophilic/hydrophobic swelling properties. The occluded complex proved to be an efficient catalyst for the oxidation of alkenes. The new triphasic system containing a cheap and easily available catalyst allowed substrate oxidation and easy product separation using ""green"" oxidants. (C) 2010 Elsevier B.V. All rights reserved.

Porphyrin-phospholipid interaction and ring metallation depending on the phospholipid polar head type

The interaction between a hydrophobically modified 5,10,15,20-tetrakis(4-N-tetradecyl-pyridyl) porphyrin and three phospholipids: two negatively charged, DMPA (the sodium salt of dimyristoyl-sn-glycero-phosphatidyl acid) and DMPG (the sodium salt of 1,2-dimyristoyl-sn-glycero-3-[phospho-rac-(1-glycerol)]) and a zwitterionic DMPC (dimyristoyl-sn-glycero-phosphatidylcholine), were studied by means of surface pressure isotherms and spectroscopic methods. The interaction results in partial or total metallation of the porphyrin with zinc ions in the presence of negatively charged phospholipids, as attested by UV-vis and luminescence spectroscopy of the transferred films. In the presence of the zwitterionic phospholipid no insertion of zinc ion in the porphyrin ring is detected. These results are relevant for the understanding of photosensitizer-lipid-carrier binding for use in photodynamic therapy. (C) 2010 Elsevier Inc. All rights reserved.

Tetra-crowned porphyrin as P450 biomimetic model for carbamazepine oxidation

A substituted porphyrin bearing four crown ether units, H(2)(TCP), was synthesized from the reaction between (5,10,15,20-tetra(o-aminophenyl) porphyrin) and the acyl derivative of the ether (4-carboxy-18-crown-6). The free-base porphyrin was characterized by C, N, and H elemental analysis; UV-vis and IR spectroscopies; and (1)H NMR. The corresponding ironporphyrin, Fe(TCP)Cl, was obtained via iron insertion into H(2)(TCP). Fe(TCP)Cl was employed as catalyst for carbamazepine (CBZ) oxidation by iodosylbenzene (PhIO), 3-chloroperoxybenzoic acid (m-CPBA) or sodium hypochlorite (NaOCl), in methanol or in a biphasic water/dichloroethane system. The crowned ironporphyrin proved to be a highly efficient and selective catalyst for CBZ epoxidation even in the biphasic dichloroethane /H(2)O system, with no need for an additional phase transfer agent.

Validated spectrophotometric and spectrofluorimetric methods for determination of chloroaluminum phthalocyanine in nanocarriers

UV-VIS-Spectrophotometric and spectrofluorimetric methods have been developed and validated allowing the quantification of chloroaluminum phthalocyanine (CIAIPc) in nanocarriers. In order to validate the methods, the linearity, limit of detection (LOD), limit of quantification (LOQ), precision, accuracy, and selectivity were examined according to USP 30 and ICH guidelines. Linearities range were found between 0.50-3.00 mu g.mL(-1) (Y=0.3829 X [CIAIPc, mu g.mL(-1)] + 0.0126; r=0.9992) for spectrophotometry, and 0.05-1.00 mu g.mL(-1) (Y=2.24 x 10(6) X [CIAIPc, mu g.L(-1)] + 9.74 x 10(4); r=0.9978) for spectrofluorimetry. In addition, ANOVA and Lack-of-fit tests demonstrated that the regression equations were statistically significant (p<0.05), and the resulting linear model is fully adequate for both analytical methods. The LOD values were 0.09 and 0.01 mu g.mL(-1), while the LOCI were 0.27 and 0.04 mu g.mL(-1) for spectrophotometric and spectrofluorimetric methods, respectively. Repeatability and intermediate precision for proposed methods showed relative standard deviation (RSD) between 0.58% to 4.80%. The percent recovery ranged from 98.9% to 102.7% for spectrophotometric analyses and from 94.2% to 101.2% for spectrofluorimetry. No interferences from common excipients were detected and both methods were considered specific. Therefore, the methods are accurate, precise, specific, and reproducible and hence can be applied for quantification of CIAIPc in nanoemulsions (NE) and nanocapsules (NC).

Synthesis and structural properties of patellamide a derivatives and their copper(II) compounds

The synthesis, characterization and copper(II) coordination chemistry of three new cyclic peptide ligands, PatJ(1) (cyclo-(Ile -Thr- (Gly)Thz-lle-Thr(Gly)Thz)), PatJ(2) (cyclo-(Ile-Thr(Gly)Thz-(D)-Ile-Thr-(Gly)Thz)), and PatL (cyclo-(Ile-Ser-(Gly)Thz-Ile-Ser(Gly)Thz)) are reported. All of these cyclic peptides and PatN (cyclo-(Ile-Ser(Gly)Thz-Ile-Thr-(Gly)Thz)) are derivatives of patellamide A and have a [24]azacrown-8 macrocyclic structure. All four synthetic cyclic peptides have two thiazole rings but, in contrast to patellamide A, no oxazoline rings. The molecular structure of PatJ1, determined by X-ray crystallography, has a saddle conformation with two close-to-co-parallel thiazole rings, very similar to the geometry of patellamide D. The two coordination sites of PatJ1 with thiazole-N and amide-N donors are each well preorganized for transition metal ion binding. The coordination of copper(II) was monitored by UV/Vis spectroscopy, and this reveals various (meta)stable mono- and dinuclear copper(II) complexes whose stoichiometry was confirmed by mass spectra. Two types of dinuclear copper(II) complexes, [Cu-2(H4L)(OH2)(n)](2+) (n = 6, 8) and [Cu-2(H4L)(OH2)(n)] (n=4, 6; L=PatN, PatL, PatJ1, PatJ2) have been identified and analyzed structurally by EPR spectroscopy and a combination of spectra simulations and molecular mechanics calculations (MM-EPR). The four structures are similar to each other and have a saddle conformation, that is, derived from the crystal structure of PatJ(1) by a twist of the two thiozole rings. The small but significant structural differences are characterized by the EPR simulations.

Explicit evidence-based prescribing criteria - an important step in achieving quality therapeutics in nursing homes

Reaction between 5-(4-amino-2-thiabutyl)-5-methyl-3,7-dithianonane-1, 9-diamine (N3S3) and 5- methyl-2,2-bipyridine-5-carbaldehyde and subsequent reduction of the resulting imine with sodium borohydride results in a potentially ditopic ligand (L). Treatment of L with one equivalent of an iron( II) salt led to the monoprotonated complex [Fe(HL)](3+), isolated as the hexafluorophosphate salt. The presence of characteristic bands for the tris( bipyridyl) iron( II) chromophore in the UV/vis spectrum indicated that the iron( II) atom is coordinated octahedrally by the three bipyridyl (bipy) groups. The [Fe( bipy) 3] moiety encloses a cavity composed of the N3S3 portion of the ditopic ligand. The mononuclear and monomeric nature of the complex [Fe(HL)](3+) has been established also by accurate mass analysis. [Fe(HL)](3+) displays reduced stability to base compared with the complex [Fe(bipy)(3)](2+). In aqueous solution [Fe(HL)](3+) exhibits irreversible electrochemical behaviour with an oxidation wave ca. 60 mV to more positive potential than [Fe(bipy)(3)](2+). Investigations of the interaction of [Fe(L)](2+) with copper( II), iron( II), and mercury( II) using mass spectroscopic and potentiometric methods suggested that where complexation occurred, fewer than six of the N3S3 cavity donors were involved. The high affinity of the complex [Fe(L)](2+) for protons is one reason suggested to contribute to the reluctance to coordinate a second metal ion.

Discrete cyanide-bridged mixed-valence Co/Fe complexes: Outer-sphere redox behaviour

The outer-sphere redox behaviour of a series of [LnCoIII-NCFeII(CN)(5)](-) (L-n = n-membered pentadentate aza-macrocycle) complexes have been studied as a function of pH and oxidising agent. All the dinuclear complexes show a double protonation process at pH approximate to 2 that produces a shift in their UV/Vis spectra. Oxidation of the different non-protonated and diprotonated complexes has been carried out with peroxodisulfate, and of the non-protonated complexes also with trisoxalatocobaltate(III). The results are in agreement with predictions from the Marcus theory. The oxidation of [Fe(phen)(3)](3+) and [IrCl6](2-) is too fast to be measured, although for the latter the transient observation of the process has been achieved at pH = 0. The study of the kinetics of the outer-sphere redox process, with the S2O82- and [Co(ox)(3)](3-) oxidants, has been carried out as a function of pH, temperature, and pressure. As a whole, the values found for the activation volumes, entropies, and enthalpies are in the following margins, for the diprotonated and non-protonated dinuclear complexes, respectively: DeltaV(not equal) from 11 to 13 and 15 to 20 cm(3) mol(-1); DeltaS(not equal) from 110 to 30 and -60 to -90 J K-1 mol(-1); DeltaH(not equal) from 115 to 80 and 50 to 65 kJ.mol(-1). The thermal activation parameters are clearly dominated by the electrostriction occurring on outer-sphere precursor formation, while the trends found for the values of the volume of activation indicate an important degree of tuning due to the charge distribution during the electron transfer process. The special arrangement on the amine ligands in the isomer trans[(L14CoNCFeII)-N-III(CN)(5)](-) accounts for important differences in solvent-assisted hydrogen bonding occurring within the outer-sphere redox process, as has been established in redox reactions of similar compounds. ((C) Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2003).

Desenvolvimento de quelantes macrocíclicos para complexação de iões metálicos de transição e lantanídeos com interesse em aplicações médicas

A investigação de novos compostos macrocíclicos tetraaza tem sido intensificada ao longo das últimas décadas, uma vez que estes estão entre os melhores ligandos para complexação de iões metálicos. Desta forma, tanto a síntese destes compostos, como as propriedades dos seus complexos com iões metálicos provocaram o seu crescente interesse em variadíssimas áreas, das quais são exemplo a medicina, a biologia, a catálise, e a química analítica. Procuram-se ligandos específicos para determinados iões metálicos, mas que ao mesmo tempo se preparem por processos de síntese simples e eficazes que permitam uma maior utilização ao nível industrial. Com este trabalho procurou-se dar continuidade aos estudos desenvolvidos nesta área desde 1980 pelo grupo de investigação onde me encontro inserida e assim obter ligandos novos com vista à formação de complexos com iões metálicos estáveis e aplicáveis ao nível da medicina e da farmacologia, com destaque para as aplicações relacionadas com o diagnóstico e a terapia de tumores. Assim, foram sintetizados quatro novos ligandos derivados de macrociclos tetraaza com 12 átomos no anel, dois deles com ponte cruzada curta tipo etano. A síntes baseou-se na funcionalização destes macrociclos com braços pendentes metilnitrofenol ou metilfenol, originando assim os seguintes compostos: cb-do2nph, do2nph, cb-do2ph e do do2ph. Todos os compostos sintetizados foram caracterizados por diversas técnicas analíticas. Os compostos cb-do2nph e do2nph mostraram reduzida solubilidade em água e em metanol:água, pelo que não foi possível a determinação de constantes por potenciometria. Preparam-se alguns complexos que se estudaram em solução por espectroscopia electrónica e no estado sólido por difracção de raios X. O composto do2ph só se obteve em pequena quantidade sem revelar a pureza necessária e, a sua síntese ainda terá de ser optimizada. Finalmente, o composto cb-do2ph foi sintetizado em quantidade suficiente para se poderem determinar as suas constantes de protonação e as constantes de estabilidade dos seus complexos com Cu 2+ e Zn 2+, pelo método potenciomátrico, em solução aquosa, à temperatura de 298,2 K e à força iónica 0,10M em N(CH 3)4NO3. Determinaram-se ainda por potenciometria as constantes de protonação bem como as constantes de estabilidade dos complexos com Mg2+, Cu2+, Zn 2+, Fe3+, Ga3+, In3+, Gd3+, do composto cbdbf-do2a, igualmente em solução aquosa, à temperatura de 298,2K e à força iónica 0,10M em N(CH 3)4NO3. Para ambos os compostos, cb-do2ph e cbdbf-do2a, recorreu-se a titulações por espectroscopia de RMN de 1H para a determinação da primeira constante, por esta ter um valor muito elevado (log K1 ≥ 14), ou seja, estes compostos comportaram-se como “esponjas de protão”. Para obter informações estruturais dos complexos de alguns ligandos com cobre (II) realizaram-se estudos por espectroscopia de absorção de UV-Vis e de RPE, tendo-se ainda obtido cristais de tamanho suficiente para a determinação de estruturas por difracção de raios X de alguns compostos e complexos de cobre (II) e Zinco(II).

Implementação e validação de uma metodologia analítica forense para a detecção/identificação de explosivos orgânicos

Na análise forense de explosivos é comum a tarefa de análise química num cenário de pós-explosão com o objectivo de detectar/identificar resíduos do explosivo usado. A maior dificuldade desta análise está directamente relacionada com os baixos teores de resíduos de explosivos que se encontram. Assim, é necessário que os diferentes passos aos quais as amostras são sujeitas, desde a sua recolha, acondicionamento e transporte, passando pela extracção no laboratório, até serem analisadas, sejam realizados com o maior controlo possível. Todas as tarefas envolvidas em todas as etapas poderão contribuir com erros que afectarão o resultado final. Deste modo, é da maior importância elaborar um programa de controlo da qualidade para que as análises sejam efectuadas de modo correcto, reprodutível e eficaz. Este trabalho consistiu na optimização e validação do desempenho qualitativo de um método de ensaio para detecção e identificação de quinze explosivos orgânicos através de cromatografia líquida de alto desempenho com um detector de ultravioleta-visível (HPLC-UV-Vis). De seguida estabeleceu-se um programa de controlo de qualidade (CQ) para ensaios em rotina, baseado nos resultados obtidos através da validação. Por fim, foi testado o referido programa com análises a diferentes amostras reais. De acordo com os resultados obtidos, o novo método de ensaio desenvolvido demonstrou ser um método mais rápido na análise de explosivos quando comparado com o anterior método. Portanto, é possível concluir que, através de testes estatísticos, ficou provado que o método é adequado para o fim a que se destina, podendo substituir com vantagens o método anteriormente utilizado em ensaios de rotina. Contudo, este método apresenta como principal desvantagem a dificuldade em separar compostos que apresentam isómeros. Esta é uma limitação menor que poderá ser estudada em trabalhos futuros.

Síntese de complexos de ferro (II) e Ruténio (II) com potenciais aplicações como condutores moleculares

De sua definição, um condutor molecular é “ uma molécula dimensional” que permite a troca de um electrão entre as extremidades através de uma ponte, sendo elas mesmas capazes de trocar electrões com o exterior. Os condutores moleculares envolvendo centros metálicos podem ser constituídos por um sistema orgânico deslocalizado que estabelece a ponte entre os centros metálicos terminais, sendo ambas as partes responsáveis pelo desempenho final do condutor molecular. Os espaçadores orgânicos são responsáveis pelas propriedades electrónicas e pelo comprimento do condutor, enquanto que os centros metálicos, ao introduzirem electrões no sistema, aumentam a condutividade. No capítulo 1 faz-se uma breve introdução aos condutores moleculares, como podem ser avaliados segundo a sua estrutura. Outro assunto abordado é a influência de compostos, mostrando deste modo a interferência do tipo de espaçadores utilizados. Faz-se ainda uma breve apresentação sobre os compostos homo e heterobimetálicos. Finalmente, apresenta-se uma pequena revisão sobre os compostos organometálicos σ-metálicos. No capítulo 2 apresenta-se a síntese e caracterização dos compostos orgânicos, nomeadamente ρ-NΞCC6H4CCSiMe3, ρ-NΞCC6H4CCH e ρ-HCΞCC6H4CCH. No capítulo 3 descreve-se a síntese de diversos complexos monometálicos de Ferro (II) e ruténio (II) com os ligandos acima referidos e diferentes fragmentos metálicos [FeCp(CO)2]+, [FeCp(dppe)]+, [RuCp(dppe)]+ e [RuCp(PPh3)2]+. Os complexos obtidos foram caracterizados utilizando as técnicas espectroscópicas usuais: RMN, IV, UV-vis. A eficiência da interacção electrónica entre os centros, ao longo do sistema тт, foi avaliada por estudos electroquímicos (voltametria cíclica). No capítulo 4 encontram-se descritas as diversas tentativas de síntese dos compostos homo e heterobimetálicos. Os ligandos e fragmentos utilizados foram os mesmos que no capítulo anterior. O capítulo 5 descreve os pormenores experimentais da síntese e a caracterização espectroscópica dos compostos apresentados nos capítulos anteriores, bem como as condições gerais em que foram obtidos.

A new chemical route to synthesise TM-doped (TM = Co, Fe) TiO2 nanoparticles

Since the discovery of ferromagnetism well above room temperature in the Co-doped TiO2 system, diluted magnetic semiconductors based on TiO2 doped with transition metals have generated great interest because of their potential use in the development of spintronic devices. The purpose of this paper is to report on a new and swift chemical route to synthesise highly stable anatase single-phase Co- and Fe-doped TiO2 nanoparticles, with dopant concentrations of up to 10 at.-% and grain sizes that range between 20 and 30 nm. Complementary structural, microstructural and chemical analyses of the different nanopowders synthesised strongly support the hypothesis that a homogeneous distribution of the dopant element in the substitutional sites of the anatase structure has been achieved. Moreover, UV/Vis diffuse reflectance spectra of powder samples show redshifts to lower energies and decreasing bandgap energies with increasing Co or Fe concentration, which is consistent with n-type doping of the TiO2 anatase matrix. Films of Co-doped TiO2 were successfully deposited onto Si (100) substrates by the dip-coating method, with suspensions of Ti1-xCOxO2 nanoparticles in ethylene glycol. ((C)Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2008).