Phenolic matrices and sisal fibers modified with hydroxy terminated polybutadiene rubber: Impact strength, water absorption, and morphological aspects of thermosets and composites

The aim of the present work was to investigate the toughening of phenolic thermoset and its composites reinforced with sisal fibers, using hydroxyl-terminated polybutadiene rubber (HTPB) as both impact modifier and coupling agent. Substantial increase in the impact strength of the thermoset was achieved by the addition 10% of HTPB. Scanning electron microscopy (SEM) images of the material with 15% HTPB content revealed the formation of some rubber aggregates that reduced the efficiency of the toughening mechanism. In composites, the toughening effect was observed only when 2.5% of HTPB was added. The rubber aggregates were found located mainly at the matrix-fiber interface suggesting that HTPB could be used as coupling agent between the sisal fibers and the phenolic matrix. A composite reinforced with sisal fibers pre-impregnated with HTPB was then prepared; its SEM images showed the formation of a thin coating of HTPB on the surface of the fibers. The ability of HTBP as coupling agent between sisal fibers and phenolic matrix was then investigated by preparing a composite reinforced with sisal fibers pre-treated with HTPB. As revealed by its SEM images, the HTPB pre-treatment of the fibers resulted on the formation of a thin coating of HTPB on the surface of the fibers, which provided better compatibility between the fibers and the matrix at their interface, resulting in a material with low water absorption capacity and no loss of impact strength. (C) 2009 Elsevier B.V. All rights reserved.

Characterization of banana, sugarcane bagasse and sponge gourd fibers of Brazil

In recent times, increasing attention has been paid to the use of renewable resources particularly of plant origin keeping in view the ecological concerns, renewability and many governments passing laws for the use of such materials. On the other hand, despite abundant availability of lignocellulosic materials in Brazil, very few attempts have been made about their utilization, probably due to lack of sufficient structure/property data. Systematic studies to know their properties and morphology may bridge this gap while leading to value addition to these natural materials. Chemical composition, X-ray powder diffraction, and morphological studies and thermal behavior aspects in respect of banana, sugarcane bagasse sponge gourd fibers of Brazilian origin are presented. Chemical compositions of the three fibers are found to be different than those reported earlier. X-ray diffraction patterns of these three fibers exhibit mainly cellulose type I structure with the crystallinity indices of 39%, 48% and 50% respectively for these fibers. Morphological studies of the fibers revealed different sizes and arrangement of cells. Thermal stability of all the fibers is found to be around 200 degrees C. Decomposition of both cellulose and hemicelluloses in the fibers takes place at 300 degrees C and above, while the degradation of fibers takes place above 400 degrees C. These data may help finding new uses for these fibers. (C) 2009 Elsevier B.V. All rights reserved.

Road Sign Recognition based onInvariant Features using SupportVector Machine

Since last two decades researches have been working on developing systems that can assistsdrivers in the best way possible and make driving safe. Computer vision has played a crucialpart in design of these systems. With the introduction of vision techniques variousautonomous and robust real-time traffic automation systems have been designed such asTraffic monitoring, Traffic related parameter estimation and intelligent vehicles. Among theseautomatic detection and recognition of road signs has became an interesting research topic.The system can assist drivers about signs they don’t recognize before passing them.Aim of this research project is to present an Intelligent Road Sign Recognition System basedon state-of-the-art technique, the Support Vector Machine. The project is an extension to thework done at ITS research Platform at Dalarna University [25]. Focus of this research work ison the recognition of road signs under analysis. When classifying an image its location, sizeand orientation in the image plane are its irrelevant features and one way to get rid of thisambiguity is to extract those features which are invariant under the above mentionedtransformation. These invariant features are then used in Support Vector Machine forclassification. Support Vector Machine is a supervised learning machine that solves problemin higher dimension with the help of Kernel functions and is best know for classificationproblems.

Materials Education and Research in Art and Design: A New Role for Libraries - Session 3. RISD Faculty

Faculty from Rhode Island School of Design representing Interior Architecture, Industrial Design, and Textiles detail their thoughtful interactions with materials.

Por que o Brasil não precisa de política industrial

This article discusses the convenience of adopting industrial policy in Brazil. We argue that the success of East Asian countries, usually explained by industrial policy, is mainly result of horizontal policies. We also show that there are not theoretical or empirical foundations in most of the arguments used to justify industrial policy and that industrial policy must be motivated by market failures. We briefly discuss what market failures theoretically justify industrial policy, what the empirical relevance of these failures and what the most adequate instruments to be used in case of public intervention. From this perspective, we analyze the Brazilian industrial policy, such as described in Brasil (2003). Finally, we conclude that horizontal policies, besides to be less subject to the influence of self-interested groups, have more potential to foster Brazilian growth.

Atração de investimentos como instrumento de política industrial: o caso do ceará no período 1985-2002

This paper aims to assess the performance of credit and fiscal mechanisms in attracting industrial investment to the state of Ceará during 1985-2002, a period characterized by the political and administrative continuity which begun with the implementation of the so-called "Plan of Changes", during the term in office of former state governor Tasso Jereissati. In order to accomplish that, a survey was conducted of the state's credit, fiscal and infrastructure incentive mechanisms, industrial policy and the period's political context, as well as data from the Department of Industry and Commerce and on the economic performance of the state of Ceará. Over 700 industrial businesses were found to have been attracted into the state by means of the Industrial Investment Attraction Program, which amounted to a process of industry expansion while the country as a whole was going through a period of deindustrialization. The analysis points out that, if on one hand, the industrialization model then adopted was able to generate economic growth, on the other hand, it increased income concentration and could not drive industry into the less developed areas across the state's interior, as expected by Ceará's state government officials.

Emprego industrial no pólo industrial de Manaus na década de 90: expectativas, resultados e possibilidades

A década de 90 representou significativas mudanças no panorama político econômico brasileiro, especificamente no projeto de desenvolvimento regional denominado Zona Franca de Manaus. Esse projeto foi concebido, primordialmente para integrar essa imensa região Amazônica ao restante do Brasil, em termos de complexa ordem geopolítica dominante nos anos 60. A análise que objetiva essa dissertação trata da evolução do emprego industrial no Pólo Industrial de Manaus na década de 90, com a conotação de expectativas, resultados e possibilidades. A implementação do projeto Zona Franca de Manaus, no que concerne seu Pólo Industrial permitiu que contingentes de mão-de-obra abundante na capital do Estado do Amazonas, tivesse a oportunidade de inserir-se no mercado de trabalho do processo de industrialização moderna. Todavia, essa mão-de-obra abundante não estava preparada para o que as indústrias demandavam, sendo necessários intensivos programas de adequação profissional para que possibilitasse o aproveitamento em processos produtivos de linhas de montagem. o Pólo Industrial de Manaus, apesar de todas as mudanças havidas na economia brasileira no período analisado, obteve significativos alcance de competências na capacitação desse contingente de trabalhadores que foram absorvidos, quando o paradigma da intensividade do fator trabalho imperava no Pólo. Entretanto, o processo de mudança que a globalização econômica e industrial provocou no sistema de produção global, trouxe para o modelo industrial da Zona Franca de Manaus acelerada mudança desse paradigma, resultando variações na demanda por mão-de-obra e acarretando significativo desemprego estrutural. É desse contexto de mudanças que trata o estudo apresentado, analisando a evolução das variáveis que influenciaram no nível de emprego industrial e no mercado de trabalho, as expectativas de novos perfis e as demandas específicas que o novo paradigma de capital intensivo, adotado pelas empresas de classe mundial desse Pólo exigem.

Mensuração de Capacidade Tecnológica no Contexto de Industrialização Recente: Uma Breve Reflexão Crítica Sobre Taxonomias e Evidências de Pesquisas Recentes

This dissertation aims at examining empirical evidences obtained in the light of taxonomies and strategies for measuring firms technological capabilities and innovation in the context of developing countries, motivated by the fact that debates and studies directed to innovation has been intensified, for the last thirty years, by the recognition of its vital and growing importance to the technological, economic, competitive and industrial development of firms and countries. Two main tendencies can be identified on this debate. At one side, it¿s the literature related to the developed countries logic, whose companies are, in majority, positioned at the technological frontier, characterized by the domain of innovative advanced capabilities, directed to its sustaining, deepening and renewal. At the other side, there are the perspectives directed to the developing countries reality, where there is a prevalence of companies with deficiency of resources, still in process of accumulating basic and intermediate technological capabilities, with characteristics and technological development trajectories distinct or even reverse from those of developing countries. From this last tradition of studies, the measuring approaches based in C&T indicators and in types and levels of technological capabilities stand out. The first offers a macro level, aggregated perspective, through the analysis of a representative sample of firms, seeking to the generation of internationally comparable data, without addressing the intraorganizational specificities and nuances of the paths of technological accumulation developed by the firms, using, mostly, R&D statistics, patents, individual qualifications, indicators that carry their own limitations. On the other hand, studies that examine types and levels of technological capabilities are scarce, usually directed to a small sample of firms and/or industrial sectors. Therefore, in the light of the focus and potentialities of each of the perspectives, this scenario exposes a lack of studies that examine, in a parallel and complementary way, both types of strategies, seeking to offer more realistic, consistent and concrete information about the technological reality of developing countries. In order to close this gap, this dissertation examines (i) strategies of innovation measurement in the contexts of developing countries based on traditional approaches and C&T indicators, represented by four innovation surveys - ECIB, PINTEC, PAEP and EAI, and, (ii) from the perspective of technological capabilities as an intrinsic resource of the firm, the development of which occurs in a cumulative way and based on learning, presents and extracts generalizations of empirical applications of a metric that identifies types and levels of technological capabilities, through a dynamic and intra-firm perspective. The exam of the empirical evidences of the two approaches showed what each one of the metrics are capable to offer and the way they can contribute to the generation of information that reflect the technological development of specific industrial sectors in developing countries. In spite of the fact that the focus, objective, perspective, inclusion, scope and lens used are substantially distinct, generating, on a side, an aggregated view, and of other, an intra-sector, intra-organizational and specific view, the results suggest that the use of one doesn't implicate discarding or abdicating the other. On the contrary, using both in a complementary way means the generation of more complete, rich and relevant evidences and analysis that offer a realistic notion of the industrial development and contribute in a more direct way to the design of corporate strategies and government policies, including those directed to the macro level aspects just as those more specific and focused, designed to increment and foment firms in-house innovative efforts.

Exchange rate policies, patterns of specialization and economic development: theory and evidence in developing countries

The objectives of this paper are twofold. First, it intends to provide theoretical elements to analyze the relation between real exchange rates and economic development. Our main hypothesis is very much in line with the Dutch disease literature, and states that competitive currencies contribute to the existence and maintenance of the anufacturing sector in the economy. This, in turn, brings about higher growth rates in the long run, given the existence of increasing returns in the industrial sector, and its importance in generating echnological change and increasing productivity in the overall economy. The second objective of this paper is empirical. It intends to analyze examples of successful exchange rate policies, such as Chile and Indonesia in the eighties, as a benchmark for comparison with countries where currency overvaluation has taken place, such as Brazil. In the latter case, the local currency is being inflated by large capital inflows, due to high domestic interest rates and to a boom in demand and prices of commodities in the international markets. It will be argued that the industrial sector bears most of the burden when the currency appreciates, and that Brazil risks at deindustrialization if there are no changes in the exchange rate regime

Texto e contexto das leis orgânicas dos ensinos industrial, comercial e agrícola: 1942-1946

O trabalho destina-se a caracterizar e a delinear o conteúdo expresso no texto das Leis Orgânicas dos Ensinos Industrial, Comercial e Agricola, respectivamente, Decreto-lei n9 4.073 de 30 de janeiro de 1942, Decreto-lei n9 6.141 de 28 de dezembro de 1943 e Decreto-lei n9 9.613 de 20 de agosto de 1946 e a sua vinculação com o contexto politico-socio-econômico-administrativo-educacional. O estudo e esquematizado em quatro capitulos. Os dois pr1me1ros capitulos seguem a linha de investigaçao historica, sendo focalizadas as evoluções do ensino profi~ sional brasileiro e dos variados aspectos do contexto para posicionar o texto das Leis Orgânicas dos Ensinos Industrial, Comercial e Agricola. Os dois últimos capitulas tem como escopo aflorar a ideologia do texto dessas leis orgânicas, sendo que o terceiro capitulo apresenta a anilise de discurso do texto em evid~ncia, enquanto que o quarto capitulo analisa e interpreta as premissas ideologicas entre o texto das leis organicas e o contexto. Os quatro capItulas visam aos fatos e as ideias formuladas e sedimenta das pelo contexto, através do texto das Leis Orgânicas dos Ensinos Industrial, Comercial e Agricola. A pesquisa evidencia que o texto das Leis Orginicas dos Ensinos Industrial, Comercial e Agricola empreende perfeitamente as funções ideologicas elaboradas pelo gover no para atender i realidade do Estado Novo atraves da sedi mentação da ordem vigente e dos mecanismos de conservaçao e de reprodução sociais, apesar de ser constatada eial alienação is necessidades da efetivação do a parprocesso de industrialização no Pais e da construção de um modelo de sistema educacional adequado ao sistema geral de produçao e de acordo com o progresso social exigido pelo contex to.

The Brazilian venture capital industry and its strategic role in closing the financing gap of SMEs

This discussion paper is a contribution of the Brazilian Government to the 2006 Annual Conference of the OECD High-level Conference on "Better Financing for Entrepreneurship and SMEs" to be held in Brasilia, Brazil on 27-30 March 2006. It has been prepared by The Center for Studies in Private Equity and Venture Capital of EAESP-Fundação Getúlio Vargas under the auspices of ABDI – Agência Brasileira para o Desenvolvimento Industrial – an agency of the Ministry of Industrial Development and Foreign Trade, in cooperation with ABVCAP – The Brazilian Association of Private Equity and Venture Capital

Forecast comparison with nonlinear methods for brazilian industrial production

Este trabalho avalia as previsões de três métodos não lineares — Markov Switching Autoregressive Model, Logistic Smooth Transition Autoregressive Model e Autometrics com Dummy Saturation — para a produção industrial mensal brasileira e testa se elas são mais precisas que aquelas de preditores naive, como o modelo autorregressivo de ordem p e o mecanismo de double differencing. Os resultados mostram que a saturação com dummies de degrau e o Logistic Smooth Transition Autoregressive Model podem ser superiores ao mecanismo de double differencing, mas o modelo linear autoregressivo é mais preciso que todos os outros métodos analisados.

Forecast comparison with nonlinear methods for Brazilian industrial production

This work assesses the forecasts of three nonlinear methods | Markov Switching Autoregressive Model, Logistic Smooth Transition Auto-regressive Model, and Auto-metrics with Dummy Saturation | for the Brazilian monthly industrial production and tests if they are more accurate than those of naive predictors such as the autoregressive model of order p and the double di erencing device. The results show that the step dummy saturation and the logistic smooth transition autoregressive can be superior to the double di erencing device, but the linear autoregressive model is more accurate than all the other methods analyzed.

Meta-theories in research: positivism, postmodernism, and critical realism

No scholar or researcher is able to provide robust evidence that counters the scant reflection on metatheory – mostly ontology and epistemology – underlying management studies in general, and industrial marketing and purchasing research in particular. This paper is a contribution to the indispensable discussion of metatheoretical alternatives in research, and most importantly, the strengths and shortcomings thereof, and respective implications on research questions, objectives, and findings.

Reestruturação do setor industrial e transformação do espaço urbano de Campina Grande PB : a partir dos anos 1990

The central objective of this thesis is studying the changes in the industrial sector of Campina Grande-PB, in the years 1990, about the size of that space and urban sector. The hypothesis that guides this work is that there was a reconfiguration and industrial space in recent years, the result of the restructuring of productive capital and, secondarily, public policies - economic, urban etc. - implemented in the municipality in the years 1990. This reconfiguration industrial meant thepredominance of certain productive segments of the industry and the shift towards urban-industrial areas (industrial districts). This work is guided in these two axes to explain the changes in the industrial campinense and its consequent impact on the urban development of Campina Grande. It is understood by reconfiguration industrial changes in industrial structure, namely the preponderance of one or more productive segments on the other, changing the scenario of production, employment and the number of establishments. In this study, are considered as institutional structures of support and assistance to industry, the various institutions that directly and indirectly, contribute to the development of productive activity. These structures are the first to undergo institutional changes, physical and policies because of intrinsic connection with the industry. The institutional structures contribute to the development of industrial activity and urban development. In Campina Grande, these institutions are important for facilitating the development of certain segments. In this work, sought to identify the current configuration industrial campinense, explaining how the restructuring of production transformed the industry, modifying the urban space in Campina Grande - PB, to direct itself to specific urban areas, from the early 1990