Optimization of the power cable for low voltage direct current system

The demand for electricity is constantly growing in contemporary world and, in the same time, quality and reliability requirements are becoming more rigid. In addition, renewable sources of energy have been widely introduced for power generation, and they create specific challenges for the network. Consequently, new solution for distribution system is required, and Low Voltage Direct Current (LVDC) system is the proposed one. This thesis focuses on the investigation of specific cable features for low voltage direct current (LVDC) distribution system. The LVDC system is public ±750 VDC distribution system, which is currently being developed at Lappeen-ranta University of Technology. The aspects, considered in the thesis, are reliable and economic power transmission in distribution networks and possible power line communication in the LVDC cable.

The role of power relations in strategic supply management – A value net approach

Supplier relationships are key elements of supply management and thus have attracted substantial research interest among academics and practitioners. The collaborative nature of relationships has been the focus of the mainstream research, and limited interest has been channelled towards power in buyer–supplier relationships. However, power is one of the key factors determining the outcomes in many business relations. Hence, one of the main objectives of this dissertation is to clarify how power may influence the nature of buyer–supplier relationships and, moreover, the depth of collaboration. Another main objective is to clarify the role of power relations in strategic supply management. Given the different nature of relationships, the firm needs divergent strategies in its supply management in order to handle them efficiently. Power has been identified as one of the factors that affect the nature of buyer–supplier relationships, and firms should thus develop strategies for handling power relations. Three research questions are addressed in pursuit of these objectives, the aim being to clarify the sources of power, the influence of power on collaboration, and the role of buyer–supplier relationships in the firm’s supply strategy. This dissertation has two parts. The first part provides a synthesis of the overall dissertation, and the second part comprises five complementary research papers. The qualitative research method is applied in an empirical case study from the Finnish food industry. The main contribution of this dissertation is that it clarifies the role of power relations in strategic supply management in value nets, and discloses the nature of power as an influencing factor in supplier relationships. It extends the discussion on power in buyer– supplier relationships in highlighting the context of networks and raising the question of network effects on power relations. It also illustrates how power positions and power relations in value nets can be determined based on the sources of power of the network actors, and shows their influence on collaboration.

Power of Photos and Video in Education

Konferenssiesitelmä: PHOTOGRAPHY NEXT International Conference at Moderna museet and Nordiska Museet, Stockholm, 4-5 February, 2010

Performance of high power fibre laser cutting of thick-section steel and mediumsection aluminium

Cutting of thick section stainless steel and mild steel, and medium section aluminium using the high power ytterbium fibre laser has been experimentally investigated in this study. Theoretical models of the laser power requirement for cutting of a metal workpiece and the melt removal rate were also developed. The calculated laser power requirement was correlated to the laser power used for the cutting of 10 mm stainless steel workpiece and 15 mm mild steel workpiece using the ytterbium fibre laser and the CO2 laser. Nitrogen assist gas was used for cutting of stainless steel and oxygen was used for mild steel cutting. It was found that the incident laser power required for cutting at a given cutting speed was lower for fibre laser cutting than for CO2 laser cutting indicating a higher absorptivity of the fibre laser beam by the workpiece and higher melting efficiency for the fibre laser beam than for the CO2 laser beam. The difficulty in achieving an efficient melt removal during high speed cutting of the 15 mmmild steel workpiece with oxygen assist gas using the ytterbium fibre laser can be attributed to the high melting efficiency of the ytterbium fibre laser. The calculated melt flow velocity and melt film thickness correlated well with the location of the boundary layer separation point on the 10 mm stainless steel cut edges. An increase in the melt film thickness caused by deceleration of the melt particles in the boundary layer by the viscous shear forces results in the flow separation. The melt flow velocity increases with an increase in assist gas pressure and cut kerf width resulting in a reduction in the melt film thickness and the boundary layer separation point moves closer to the bottom cut edge. The cut edge quality was examined by visual inspection of the cut samples and measurement of the cut kerf width, boundary layer separation point, cut edge squareness (perpendicularity) deviation, and cut edge surface roughness as output quality factors. Different regions of cut edge quality in 10 mm stainless steel and 4 mm aluminium workpieces were defined for different combinations of cutting speed and laserpower.Optimization of processing parameters for a high cut edge quality in 10 mmstainless steel was demonstrated

Distributed ControlArchitecture of Power Electronics Building-Block-Based Frequency Converters

The increasing power demand and emerging applications drive the design of electrical power converters into modularization. Despite the wide use of modularized power stage structures, the control schemes that are used are often traditional, in other words, centralized. The flexibility and re-usability of these controllers are typically poor. With a dedicated distributed control scheme, the flexibility and re-usability of the system parts, building blocks, can be increased. Only a few distributed control schemes have been introduced for this purpose, but their breakthrough has not yet taken place. A demand for the further development offlexible control schemes for building-block-based applications clearly exists. The control topology, communication, synchronization, and functionality allocationaspects of building-block-based converters are studied in this doctoral thesis. A distributed control scheme that can be easily adapted to building-block-based power converter designs is developed. The example applications are a parallel and series connection of building blocks. The building block that is used in the implementations of both the applications is a commercial off-the-shelf two-level three-phase frequency converter with a custom-designed controller card. The major challenge with the parallel connection of power stages is the synchronization of the building blocks. The effect of synchronization accuracy on the system performance is studied. The functionality allocation and control scheme design are challenging in the seriesconnected multilevel converters, mainly because of the large number of modules. Various multilevel modulation schemes are analyzed with respect to the implementation, and this information is used to develop a flexible control scheme for modular multilevel inverters.

Doubly fed induction generator versus direct drive permanent magnet synchronous generator in wind power applications

The objective of this master's thesis is to compare two different generator systems for wind turbines. It is the doubly fed induction generator system with three stage gearbox and the direct drive permanent magnet generator system. The comparison of generator systems is based on annual energy production for a given wind climate. For comparison a 3 MW, 15 rpm wind turbine is used. Modelling of a turbine rotor, gearbox and converters were done. Design of two generators was done and their performance was examined.

Introduktionen av kärnkraften i Finland

Finlands industri har av tradition varit starkt energikrävande. Träförädlingsindustrin, som fick sin egentliga start i medlet på 1800-talet, använde stora mängder energi liksom metallförädlingsföretagen i ett senare skede. Krigstiden med sin energiransonering visade handgripligen för allmänheten liksom för specialisterna att en tillräcklig tillgång till energi är ett livsvillkor för vår industri och därmed för vårt land. Efterkrigstiden kännetecknades av en allt snabbare utbyggnad av den på vatten- och ångkraft baserade elkraftskapaciteten, en utbyggnad som den inhemska verkstadsindustrin i stor utsträckning deltog i. Men redan på 1950-talet var vattenkraften till stor del utbyggd, varför den privata såväl som den statliga sektorns intresse allt mera inriktade sig på den speciellt i USA favoriserade atomenergin. Efter fördjupade studier i kärnfysik och kärnteknik vid the International School of Nuclear Science and Engineering i USA deltog författaren av dessa rader intensivt (först som Ahlströmanställd och senare som VD för Finnatom) i den utvecklingsverksamhet inom det kärntekniska området som inte bara elproducenterna utan även verkstadsindustrin i vårt land genomförde. Det var därför naturligt för mig att som objekt för min doktorsavhandling välja introduktionen av kärnkraften i Finland med speciell fokus på den inhemska verkstadsindustrins roll. Jag ställde följande forskningsfrågor: a. När och hur skedde introduktionen av kärnkraften i Finland? b. Vilka var orsakerna till och resultatet av denna introduktion? c. Vilken var den inhemska verkstadsindustrins roll? Ett grundligt studium av litteraturen inklusive mötesprotokoll och tidningsreferat samt personligen genomförda intervjuer med ett trettiotal av de verkliga aktörerna i den långa och komplicerade introduktionsprocessen ledde till en teori, vars riktighet jag anser mig ha kunnat bevisa. Den inhemska verkstadsindustrins roll var synnerligen central. Dess representanter lyckades, bl.a. refererande till erfarenheterna från utbyggnaden av vatten- och ångkraften liksom till byggandet av den underkritiska milan YXP samt forskningsreaktorn TRIGA, övertyga beslutsfattarna om att den besatt nödig kompetens för att kompensera den kompetensbrist som kunde iakttas inom vissa områden hos den sovjetiska kärnkraftverksleverantören. De inhemska leveranserna påverkade även driftsresultatet, speciellt i fallet Lovisa, i positiv riktning. Introduktionsprocessen, som omfattade tiden från slutet av 1950-talet till början på 1980-talet, beskrevs, noterande bl.a. J. W. Creswells anvisningar, i detalj i avhandlingen. Introduktionen fick som resultat konkurrenskraftig elkraft, impuls till start av nya företag, exempelvis Nokia Elektronik, liksom en klar höjning av den tekniska nivån hos vår industri, inkluderande kärnteknisk tillverkning i stor skala. Katastrofen i Tjernobyl i slutet av april 1986 innebar emellertid att utvecklingen tog en paus på ett par decennier. Erfarenheterna från introduktionsfasen kan förhoppningsvis utnyttjas till fullo nu, när utbyggnaden av kärnkraften återupptagits i vårt land.

Att förstå det stora i det lilla : byskolan som pedagogik, kultur och struktur

I det lilla sammanhanget synliggörs de stora frågorna om både pedagogik, kultur och struktur och om samverkan mellan dem. Studiet av de minsta enheterna i den finländska utbildningen ger kunskap om det viktiga i pedagogiska relationer och i skolgemenskaper, men synliggör också samhällsskeendets inbyggda konflikter om mål och värderingar. Det övergripande syftet med studien är att fördjupa kunskapen om de små skolornas pedagogiska, kulturella och strukturella innebörd och betingelser. Genom djupintervjuer med 12 finlandssvenska lärare i byskolor med färre än 30 elever, analys av skolindragningsdebatt och utbildningspolitiska styrdokument, samt genom teoretiskt förankrade reflektioner skapas en förståelse av såväl lärares arbete och pedagogiska tänkande som skolans funktion i samhället. Avhandlingen byggs upp enligt ett hermeneutiskt och narrativt tänkande. I studien framkommer att byskollärares pedagogiska tänkande syftar till det enskilda barnets optimala och balanserade helhetsutveckling i en gemenskap, där det är centralt att finna den pedagogiska balansen och möjligheten inom kontinuum mellan bl.a. elevbemyndigande och beledsagande. De pedagogiska intentionerna bär syftet att ge rötter och vingar, samhörighet och frihet. I lärarnas beskrivningar uttrycks en sammanvävning mellan deras pedagogiska intentioner och de kontextuella möjligheterna att realisera dessa. Byskollärarna är bärare av en pedagogisk professionalitet som utvecklas i relation till arbetets betingelser. Det praktiska yrkeskunnandet innefattar en balansgång mellan å ena sidan systematik och organisering och å andra sidan flexibilitet och frihet. Att samma lärare handhar eleverna en lång tid är en pedagogisk möjlighet och utmaning. I lärarnas berättelser aktualiseras vad balansgången i en god pedagogisk relation innebär. Både lärare och elever fostras in i en särskild skolkultur och undervisningskultur, i en växelverkan. Yrkeskulturen präglas av olika former av samverkan, både med skolans hela personal som ett teamarbete och med lokalsamhället. Lärarna uttrycker god arbetstrivsel, men friheten och ansvaret i arbetet kan vara både stimulerande och betungande. I en metaanalys skapas teoretiska modeller för vad arbete i närhetens och litenhetens spänningsfält kan innebära och hur det kan påverka lärares professionella utveckling och ork. Den lilla byskolan relaterad till en större samhällskontext öppnar för frågor om vad kvalitet innebär och vilka värderingar som är riktgivande inom utbildningsplanering. Kampen för kontinuiteten i byskolans berättelse tolkas som en kamp för det lokala rummet, för gemenskap, existens, framtid, likvärdighet och trygghet. Kampen för byskolan är ett försvar av både lokal livskvalitet och pedagogisk kvalitet för den enskilde eleven. I det övergripande kulturella sammanhanget synliggörs motsättningar. Det verkar finnas en inbyggd konflikt i utbildningsplaneringens föresatser att samtidigt uppnå jämlikhet, kostnadseffektivitet och kvalitet. En teoretisk modell synliggör hur pedagogik, kultur och struktur samverkar inom utbildning/byskola och påverkar lärares och elevers handlingsutrymme.

Kropp, handling och ritual: hur förstå religion och personer med grava funktionshinder?

Arbetet som omsorgspräst sedan 1990 har väckt många frågor samband med mötet med personer som har grava funktionshinder. Det har skett framför allt i skriftskolor och konfirmationsundervisning från år 1984 framåt. Men speciellt samarbetet med fysioterapeut Karin Isaksson fick betydelse. Vi inbjöd personer med svåra spänningar och lite aktivitet att delta i en grupp med avslappning och kontemplativ sång. Gruppen (1997-2001)som höll på en timme gav uppmuntrande resultat. Men det var lättare för Isaksson att tänka på det i termer av avslappning och fysiskt välbefinnande då det för mig ingick sådant som helig närvaro och tystnad i mötet med deltagarna. Det resulterade så småningom i ett forskningsprojekt som jag kallar för Aaa-gruppen efter de kontemplativa intonationsövningar som ingår i ritualen. (AÅOM). Sex par (deltagare och handledare) anmälde sig till forskningsprojektet. Materialet samlades in åren 2002-2003. Aaa-gruppens ritual består av kontemplativ gregoriansk sång(intonationsövningar + antifoner som Kyrie eleison, Hosanna Filio David, Sanctus, Non i solo pane - Människan skall icke leva av bröd allenast och Fader Vår bönen.) Samarbetet i Aaa-gruppen mellan deltagare och handledare omfattade taktil stimulans (beröring enligt strykningar och ”Keep in Touch”) Materialet samlades in som observationsprotokoll, frågeformulär och intervjuer. Materialet har jag använt för att reflektera över hur vi kan förstå Aaa-gruppen och verklighet. I avhandlingen utgår jag från tankar om kontextens betydelse för en förståelse. Jag uppfattar att tre sammanhang är av betydelse för förståelsen. Dem har jag kallat för omsorgssammanhang, religiöst sammanhang och forskarsammanhang. I avhandlingen användes tre perspektiv som jag kallar för dialogfilosofi, neurofilosofi och livsformsfilosofi för att reflektera materialet. Den nära relationen mellan deltagare och handledare i Aaa-gruppen kan förstås ur olika sammanhang. Resultatet av den religionsfilosofiska reflektionen är att sammanhangen liksom de olika filosofiska perspektiven kompletterar och ger en mångsidig förståelse för religion och personer med grava funktionshinder. Reflektionen berör grundläggande frågeställningar kring kropp och medvetande och frågan om språk (nonverbalt och verbalt) och verklighet. En dualistisk uppfattning om jaget, som delbart i kropp och medvetande, avisas till förmån för ett så kallat ”kroppsjag”. Religion i Aaa-gruppen kan förstås som ett möte i en nära relation. Ett möte som är nonverbalt men inbegriper en mänskligt förhållningssätt som inom dialogfilosofin kan beskrivas med ordparet Jag-Du.

Hälsans grund kan bara hjärtat förstå : ett sökande efter kunskap om hälsa i ljuset av Blaise Pascals tänkande

The aim of this thesis is to gain new understanding of health based on the work Penseés (Thoughts) by Blaise Pascal. The research interest originates from the motive of the heart for the greatness of man in conjunction with his baseness. The study is hermeneutic and the purpose is to describe health formulated as new abductive theses based on the assumption that caring science and caring theology can be conjoined in the same ontology. The work Penseés is, in Gadamer’s sense, alive since the text is constantly being made use of and is in this occurence interpreted through the requirements made by caring science. Pascal’s arguments continue through the historically effected consciousness while the interpretation is confronted with the ontological model of health. In the initial horizon we find the understanding of the motion of health and the extension towards text materials which is undertaken by Pascal’s Penseés. to open up the perspective and be able to project the horizon of the text. In the encounter with the text, the core content will first be discussed in an interpretative part after which the understanding gained will be summarized into new abductive assumptions. On the basis of Gadamer’s emphasis on the applications of the interpretations, the merging of the horizons will identify health as something desired by man, what he is and what he wants to accomplish. The creation of health is the reason of the heart, and on the basis of what man wants to confide in, the rise of health will be established. The totality of greatness and baseness of man is achieved by the accomplishment of health. That man owns spiritual devotedness means health whereas unhealthy means that he is insecure of his character and leads a life with ill-considered amusements. When according to Pascal, man’s desires and thoughts are joined in the heart, a connecting relation will arise. Hence the spiritual edification that man will fail to secure if he puts too much of his confidence in transient reason is included, something that is insufficient when it comes to understand the meaning of health.

Methods and Models for Accelerating Dynamic Simulation of Fluid Power Circuits

The objective of this dissertation is to improve the dynamic simulation of fluid power circuits. A fluid power circuit is a typical way to implement power transmission in mobile working machines, e.g. cranes, excavators etc. Dynamic simulation is an essential tool in developing controllability and energy-efficient solutions for mobile machines. Efficient dynamic simulation is the basic requirement for the real-time simulation. In the real-time simulation of fluid power circuits there exist numerical problems due to the software and methods used for modelling and integration. A simulation model of a fluid power circuit is typically created using differential and algebraic equations. Efficient numerical methods are required since differential equations must be solved in real time. Unfortunately, simulation software packages offer only a limited selection of numerical solvers. Numerical problems cause noise to the results, which in many cases leads the simulation run to fail. Mathematically the fluid power circuit models are stiff systems of ordinary differential equations. Numerical solution of the stiff systems can be improved by two alternative approaches. The first is to develop numerical solvers suitable for solving stiff systems. The second is to decrease the model stiffness itself by introducing models and algorithms that either decrease the highest eigenvalues or neglect them by introducing steady-state solutions of the stiff parts of the models. The thesis proposes novel methods using the latter approach. The study aims to develop practical methods usable in dynamic simulation of fluid power circuits using explicit fixed-step integration algorithms. In this thesis, twomechanisms whichmake the systemstiff are studied. These are the pressure drop approaching zero in the turbulent orifice model and the volume approaching zero in the equation of pressure build-up. These are the critical areas to which alternative methods for modelling and numerical simulation are proposed. Generally, in hydraulic power transmission systems the orifice flow is clearly in the turbulent area. The flow becomes laminar as the pressure drop over the orifice approaches zero only in rare situations. These are e.g. when a valve is closed, or an actuator is driven against an end stopper, or external force makes actuator to switch its direction during operation. This means that in terms of accuracy, the description of laminar flow is not necessary. But, unfortunately, when a purely turbulent description of the orifice is used, numerical problems occur when the pressure drop comes close to zero since the first derivative of flow with respect to the pressure drop approaches infinity when the pressure drop approaches zero. Furthermore, the second derivative becomes discontinuous, which causes numerical noise and an infinitely small integration step when a variable step integrator is used. A numerically efficient model for the orifice flow is proposed using a cubic spline function to describe the flow in the laminar and transition areas. Parameters for the cubic spline function are selected such that its first derivative is equal to the first derivative of the pure turbulent orifice flow model in the boundary condition. In the dynamic simulation of fluid power circuits, a tradeoff exists between accuracy and calculation speed. This investigation is made for the two-regime flow orifice model. Especially inside of many types of valves, as well as between them, there exist very small volumes. The integration of pressures in small fluid volumes causes numerical problems in fluid power circuit simulation. Particularly in realtime simulation, these numerical problems are a great weakness. The system stiffness approaches infinity as the fluid volume approaches zero. If fixed step explicit algorithms for solving ordinary differential equations (ODE) are used, the system stability would easily be lost when integrating pressures in small volumes. To solve the problem caused by small fluid volumes, a pseudo-dynamic solver is proposed. Instead of integration of the pressure in a small volume, the pressure is solved as a steady-state pressure created in a separate cascade loop by numerical integration. The hydraulic capacitance V/Be of the parts of the circuit whose pressures are solved by the pseudo-dynamic method should be orders of magnitude smaller than that of those partswhose pressures are integrated. The key advantage of this novel method is that the numerical problems caused by the small volumes are completely avoided. Also, the method is freely applicable regardless of the integration routine applied. The superiority of both above-mentioned methods is that they are suited for use together with the semi-empirical modelling method which necessarily does not require any geometrical data of the valves and actuators to be modelled. In this modelling method, most of the needed component information can be taken from the manufacturer’s nominal graphs. This thesis introduces the methods and shows several numerical examples to demonstrate how the proposed methods improve the dynamic simulation of various hydraulic circuits.

RF disturbances produced by high-power photovoltaic solar plants

In this thesis, analysis of electromagnetic compatibility of high-power photovoltaic solar plant is made. Current standards suitable for photovoltaic applications are given. Measurements of antenna factor for experimental setup are shown. Also, measurements of common mode disturbance voltages in high-power solar plant are given. Importance of DC-side filter is shown. In the last part of the work, electromagnetic simulations are made. These simulations show influence of several factors to EMC of power plant. Based on these simulations and measurements recommendations are given.

Design of marine generators for alternative diesel-electric power systems

This study compares different electric propulsion systems. Results of the analysis of all the advantages and disadvantages of the different propulsion systems are given. This thesis estimates possibilities to apply different diesel-electric propulsion concepts for different vessel types. Small and medium size vessel’s power ranges are studied. The optimal delivery system is chosen. This choice is made on the base of detailed study of the concepts, electrical equipment market and comparison of mass, volume and efficiency parameters. In this thesis three marine generators are designed. They are: salient pole synchronous generator and two permanent magnet synchronous generators. Their electrical, dimensional, cost and efficiency parameters are compared. To understand all the benefits diagrams with these parameters are prepared. Possible benefits and money savings are estimated. As the result the advantages, disadvantages and boundary conditions for the permanent magnet synchronous generator application in marine electric-power systems are found out.

Economics of combined power plant and pyrolysis bio-oil production

There are reasons of necessity in bio-fuel use and bio-energy fast development. It includes the material about bio-energy technologies, applications and methods. There are basic thermodynamics and economic theories. The economic calculation presents the comparison between two combinations. There are boiler plant below 20 MW in combination with ablative pyrolysis plant for bio-oil production and CHP plant below 100 MW in combination with the RTP pyrolysis bio-oil production technology. It provides a material about wood chips and bio-oil characteristics and explains it nature, presents the situation around the bio-fuel market or bio-fuel trade. There is a description of pyrolysis technologies such as ablative and RTP. The liquid product of the pyrolysis processes is bio-oil. The bio-oil could be different even of the same production process, because of the raw material nature and characteristics. The calculation shows advantages and weaknesses of combinations and obtained a proof of suppositions. The next thing, proven by this work is the fact that to get more efficiency from energy project it is good possibility to built plants in combinations.