Free/Open Source Software Development : Results and Research Methods

Free and open source software development is an alternative to traditional software engineering as an approach to the development of complex software systems. It is a way of developing software based on geographically distributed teams of volunteers without apparent central plan or traditional mechanisms of coordination. The purpose of this thesis is to summarize the current knowledge about free and open source software development and explore the ways on which further understanding on it could be gained. The results of research on the field as well as the research methods are introduced and discussed. Also adapting software process metrics to the context of free and open source software development is illustrated and the possibilities to utilize them as tools to validate other research are discussed.

Posted Workers and Free Movement of Services in the European Union – the Impact on National Employment and Immigration Law

This thesis examines posting of workers within the free movement of services in the European Union. The emphasis is on the case law of the European Court of Justice and in the role it has played in the liberalisation of the service sector in respect of posting of workers. The case law is examined from two different viewpoints: firstly, that of employment law and secondly, immigration law. The aim is to find out how active a role the Court has taken with regard these two fields of law and what are the implications of the Court’s judgments for the regulation on a national level. The first part of the thesis provides a general review of the Community law principles governing the freedom to provide services in the EU. The second part presents the Posted Workers’ Directive and the case law of the European Court of Justice before and after the enactment of the Directive from the viewpoint of employment law. Special attention is paid to a recent judgment in which the Court has taken a restrictive position with regard to a trade union’s right to take collective action against a service provider established in another Member State. The third part of the thesis concentrates, firstly, on the legal status of non-EU nationals lawfully resident in the EU. Secondly, it looks into the question of how the Court’s case law has affected the possibilities to use non-EU nationals as posted workers within the freedom to provide services. The final chapter includes a critical analysis of the Court’s case law on posted workers. The judgments of the European Court of Justice are the principal source of law for this thesis. In the primary legislation the focus is on Articles 49 EC and 50 EC that lay down the rules concerning the free movement of services. Within the secondary legislation, the present work principally concentrates on the Posted Workers’ Directive. It also examines proposals of the European Commission and directives that have been adopted in the field of immigration. The conclusions of the case study are twofold: while in the field of employment law, the European Court of Justice has based its judgments on a very literal interpretation of the Posted Workers’ Directive, in the field of immigration its conclusions have been much more innovative. In both fields of regulation the Court’s judgments have far-reaching implications for the rules concerning posting of workers leaving very little discretion for the Member States’ authorities.

Liberty

In terms of critical discourse, Liberty contributes to the ongoing aesthetic debate on ‘the sublime.’ Philosopher Immanuel Kant (1724–1804) defined the sublime as a failure of rationality in response to sensory overload: a state where the imagination is suspended, without definitive reference points—a state beyond unequivocal ‘knowing.’ I believe the events of September 11, 2001 eluded our understanding in much the same way, leaving us in a moment of suspension between awe and horror. It was an event that couldn’t be understood in terms of scope or scale. It was a moment of overload, which is so difficult to capture in art. With my work I attempt to rekindle that moment of suspension. Like the events of 9/11, Liberty defies definition. Its form is constantly changing; it is always presenting us with new layers of meaning. Nobody quite had a handle on the events that followed 9/11, because the implications were constantly shifting. In the same way, Liberty cannot be contained or defined at any moment in time. Like the events of 9/11, the full story cannot be told in a snapshot. One of the dictionary definitions for the word ‘sublime’ is the conversion of ‘a solid substance directly into a gas, without there being an intermediate liquid phase’. With this in mind, I would like to present Liberty as a work that is literally ‘sublime.’ But what’s really interesting to me about Liberty is that it presents the sublime on all levels: in its medium, in its subject matter (that moment of suspension), and in its formal (formless) presentation. On every level Liberty is sublime—subverting all tangible reference points and eluding capture entirely. Liberty is based on the Statue of Liberty in New York. However, unlike that statue which has stood in New York since 1886 and can be reasonably expected to stand for millennia, this work takes on diminishing proportions, carved as it is in carbon dioxide, a mysterious, previously unexplored medium—one which smokes, snows and dramatically vanishes into a harmless gas. Like the material this work is carved from, the civil liberties of the free world are diminishing fast, since 9/11 and before. This was my thought when I first conceived this work. Now it’s become evident that Liberty expresses a lot more than just this: it demonstrates the erosion of civil liberties, yes. However, it also presents the intangible, indefinable moments in the days and months that followed 9/11. The sculptural work will last for only a short time, and thereafter will exist only in documentation. During this time, the form is continually changing and self-refining, until it disappears entirely, to be inhaled, metabolised and literally taken to heart by viewers.

Suomi ja Euroopan kirkollinen jälleenrakentaminen 1945-1948

The international aid that the Evangelical Lutheran Church of Finland received between 1945 and 1948 is the topic of this historical study, in which the process of reconstruction of the Evangelical Lutheran Church of Finland is examined in a European context. The key questions are related not only to the achievements of the reconstruction programs but also to the purposes and objectives of the donating churches. The study pays particular attention to the changes in the ecclesiastical, political and economic fields after the Second World War and asks how the tense political atmosphere of a divided world affected the reconstruction programs of the churches. It is possible to distinguish three periods within the European church reconstruction process. To begin with, the year 1945 was, in general, the year of organization. Many churches had started planning reconstruction work already during the war, but only after the conflict in Europe had ceased did they have a chance to renew contacts, assess the damage and begin operations. The years 1946 and 1947 were the main years of the work. Large reconstruction organizations from American churches donated money, food, clothes and vitamins worth millions of dollars to the European churches. The work started to diminish as early as 1948, partly because Marshall Plan aid and the rising standard of living had reduced the need for material assistance in many countries and partly because other problems overshadowed the reconstruction work of the World Council of Churches: for example, most WCC resources at this time were directed to refugee programs and to Third World churhces. The most important donors from the Evangelical Lutheran Church of Finland's point of view were the American Section of the Lutheran World Federation, the World Council of Churches and the Churches of Denmark, Sweden and England. The amount of money and value of goods received by the Evangelical Lutheran Church of Finland totaled approximately 2.5 million dollars, from which about 60 per cent came from the Lutheran churches of America. The importance of the Lutheran World Federation was even greater because of the productive financial arrangements that increased the American Lutheran funds. In addition the Evangelical Lutheran Church of Finland imported hundreds of tons of tax-free coffee and sold this to Finns. The money gained was used mostly to rebuild destroyed church buildings and to support the work of different ecclesiastical organizations. Smaller amounts were used for scholarship programs, youth work, and supporting sick and disabled church workers.

Eru Ilúvatar : Jumala J.R.R. Tolkienin legendariumissa

The purpose of my research is to inquire into the essence and activity of God in the legendarium of the English philologist and writer J.R.R. Tolkien (1892-1973). The legendarium, composed of Tolkien’s writings related to Middle-earth, was begun when he created two Elvish languages, Quenya based on Finnish, Sindarin based on Welsh. Tolkien developed his mythology inspired by Germanic myths and The Kalevala. It is a fictional ancient history set in our world. The legendarium is monotheistic: God is called Eru ‘The One’ and Ilúvatar ‘Father of All’. Eru is the same as the Christian God, for Tolkien wanted to keep his tales consistent with his faith. He said his works were Christian by nature, with the religious element absorbed into the story and the symbolism. In The Silmarillion, set in the primeval ages of Middle-earth, the theological aspects are more conspicuous, while in The Lord of the Rings, which brings the stories to an end, they are mostly limited to symbolic references. The legendarium is unified by its realistic outlook on creaturely abilities and hope expressing itself as humbly defiant resistance. ”The possibility of complexity or of distinctions in the nature of Eru” is a part of the legendarium. Eru Ilúvatar is Trinitarian, as per Tolkien’s faith. Without contextual qualifiers, Eru seems to refer to God the Father, like God in the Bible. Being the creator who dwells outside the world is attributed to Him. The Holy Spirit is the only Person of the Trinity bestown with names: the Flame Imperishable and the Secret Fire. When Eru creates the material world with His word, He sends the Flame Imperishable to burn at the heart of the world. The Secret Fire signifies the Creative Power that belongs to God alone, and is a part of Him. The Son, the Word, is not directly mentioned, but according to one writing Eru must step inside the world in order to save it from corruption, yet remain outside it at the same time. The inner structure of the legendarium refers to the need for a future salvation. The creative word of Eru, “Eä! Let these things Be!”, probably has a connection with the Logos in Christianity. Thus we can find three “distinctions” in Eru: a Creator who dwells outside the world, a Sustainer who dwells inside it and a Redeemer who shall step inside it. Some studies of Tolkien have claimed that Eru is distant and remote. This seems to hold water only partially. Ilúvatar, the Father of All, has a special relation with the Eruhíni, His Children, the immortal Elves and the mortal Men. He communicates with them directly only through the Valar, who resemble archangels. Nevertheless, only the Children of Eru can fight against evil, because their tragic fortunes turn evil into good. Even though religious activities are scarce among them, the fundamental faith and ultimate hope of the “Free Peoples” is directed towards Eru. He is present in the drama of history as the “Author of the Story”, who at times also interferes with its course through catastrophes and eucatastrophes, ‘good catastrophes’. Eru brings about a catastrophe when evil would otherwise bring good to an end, and He brings about a eucatasrophe when creaturely strength is not sufficent for victory. Victory over corruption is especially connected with mortal Men, of whom the most (or least) insignificant people are the Hobbits. However, because of the “primeval disaster” (that is, fall) of Mankind, ultimate salvation can only remain open, a hope for the far future.

Free vibrations of a reservoir-foundation system

The natural frequencies of a reservoir-foundation system are calculated by treating the foundation as a system of linear springs with inertia. The reservoir is treated as consisting of compressible liquid, and the influence of waves at the free surface is included. It is shown that the natural frequencies decrease monotonically as the depth of foundation participating in the motion increases. The influence of waves at the reservoir surface is negligible for the cases normally occurring in practice. It is also shown that the wavelength of motion along the reservoir has no influence on the frequencies when the foundation depth is large compared to the reservoir depth.

Rapid synthetic routes to prepare LiNi1/3Mn1/3Co1/3O2 as a high voltage, high-capacity Li-ion battery cathode material

LiNi1/3Mn1/3Co1/3O2, a high voltage and high-capacity cathode material for Li-ion batteries, has been synthesized by three different rapid synthetic methods. viz. nitrate-melt decomposition, combustion and sol-gel methods. The first two methods are ultra rapid and a time period as small as 15 min is sufficient to prepare nano-crystalline LiNi1/3Mn1/3Co1/3O2. The processing parameters in obtaining the best performing materials are optimized for each process and their electrochemical performance is evaluated in Li-ion cells. The combustion-derived LiNi1/3Mn1/3Co1/3O2 sample exhibits large extent of cation mixing (10%) while the other two methods yield LiNi1/3Mn1/3Co1/3O2 with cation mixing <5%. LiNi1/3Mn1/3Co1/3O2 prepared by nitrate-melt decomposition method exhibits superior performance as Li-ion battery cathode material.

Free vibration of rectangular plates of arbitrary thickness

Free vibration of thick rectangular plates is investigated by using the “method of initial functions” proposed by Vlasov. The governing equations are derived from the three-dimensional elastodynamic equations. They are obtained in the form of series and theories of any desired order can be constructed by deleting higher terms in the infinite order differential equations. The numerical results are compared with those of classical, Mindlin, and Lee and Reismann solutions.

Evolution of Grain-Boundary Microstructure and Texture in Interstitial-Free Steel Processed by Equal-Channel Angular Extrusion

The equal-channel angular extrusion (ECAE) of Ti-bearing interstitial-free (IF) steel was performed following two different routes, up to four passes, at a temperature of 300 degrees C. The ECAE led to a grain refinement to submicron size. After the second pass, the grain size attained saturation thereafter. The microstructural analysis indicated the presence of coincident-site lattice (CSL) boundaries in significant fraction, in addition to a high volume fraction of high-angle random boundaries and some low-angle boundaries after the deformation. Among the special boundaries, Sigma 3 and Sigma 13 were the most prominent ones and their fraction depended on the processing route followed. A deviation in the misorientation angle distribution from the Mackenzie distribution was noticed. The crystallographic texture after the first pass resembled that of simple shear, with the {112}, {110}, and {123} aligned to the macroscopic shear plane.

Calm or storm? : Wind power actors perceptions of Finnish wind power and its future

Wind power has grown fast internationally. It can reduce the environmental impact of energy production and increase energy security. Finland has turbine industry but wind electricity production has been slow, and nationally set capacity targets have not been met. I explored social factors that have affected the slow development of wind power in Finland by studying the perceptions of Finnish national level wind power actors. By that I refer to people who affect the development of wind power sector, such as officials, politicians, and representatives of wind industries and various organisations. The material consisted of interviews, a questionnaire, and written sources. The perceptions of wind power, its future, and methods to promote it were divided. They were studied through discourse analysis, content analysis, and scenario construction. Definition struggles affect views of the significance and potential of wind power in Finland, and also affect investments in wind power and wind power policy choices. Views of the future were demonstrated through scenarios. The views included scenarios of fast growth, but in the most pessimistic views, wind power was not thought to be competitive without support measures even in 2025, and the wind power capacity was correspondingly low. In such a scenario, policy tool choices were expected to remain similar to ones in use at the time of the interviews. So far, the development in Finland has followed closely this pessimistic scenario. Despite the scepticism about wind electricity production, wind turbine industry was seen as a credible industry. For many wind power actors as well as for the Finnish wind power policy, the turbine industry is a significant motive to promote wind power. Domestic electricity production and the export turbine industry are linked in discourse through so-called home market argumentation. Finnish policy tools have included subsidies, research and development funding, and information policies. The criteria used to evaluate policy measures were both process-oriented and value-based. Feed-in tariffs and green certificates that are common elsewhere have not been taken to use in Finland. Some interviewees considered such tools unsuitable for free electricity markets and for the Finnish policy style, dictatorial, and being against western values. Other interviewees supported their use because of their effectiveness. The current Finnish policy tools are not sufficiently effective to increase wind power production significantly. Marginalisation of wind power in discourses, pessimistic views of the future, and the view that the small consumer demand for wind electricity represents the political views of citizens towards promoting wind power, make it more difficult to take stronger policy measures to use. Wind power has not yet significantly contributed to the ecological modernisation of the energy sector in Finland, but the situation may change as the need to reduce emissions from energy production continues.

Mu in vitro Transposition Technology in Functional Genetics and Genomics: Applications on Mouse and Bacteriophages

Transposons are mobile elements of genetic material that are able to move in the genomes of their host organisms using a special form of recombination called transposition. Bacteriophage Mu was the first transposon for which a cell-free in vitro transposition reaction was developed. Subsequently, the reaction has been refined and the minimal Mu in vitro reaction is useful in the generation of comprehensive libraries of mutant DNA molecules that can be used in a variety of applications. To date, the functional genetics applications of Mu in vitro technology have been subjected to either plasmids or genomic regions and entire genomes of viruses cloned on specific vectors. This study expands the use of Mu in vitro transposition in functional genetics and genomics by describing novel methods applicable to the targeted transgenesis of mouse and the whole-genome analysis of bacteriophages. The methods described here are rapid, efficient, and easily applicable to a wide variety of organisms, demonstrating the potential of the Mu transposition technology in the functional analysis of genes and genomes. First, an easy-to-use, rapid strategy to generate construct for the targeted mutagenesis of mouse genes was developed. To test the strategy, a gene encoding a neuronal K+/Cl- cotransporter was mutagenised. After a highly efficient transpositional mutagenesis, the gene fragments mutagenised were cloned into a vector backbone and transferred into bacterial cells. These constructs were screened with PCR using an effective 3D matrix system. In addition to traditional knock-out constructs, the method developed yields hypomorphic alleles that lead into reduced expression of the target gene in transgenic mice and have since been used in a follow-up study. Moreover, a scheme is devised to rapidly produce conditional alleles from the constructs produced. Next, an efficient strategy for the whole-genome analysis of bacteriophages was developed based on the transpositional mutagenesis of uncloned, infective virus genomes and their subsequent transfer into susceptible host cells. Mutant viruses able to produce viable progeny were collected and their transposon integration sites determined to map genomic regions nonessential to the viral life cycle. This method, applied here to three very different bacteriophages, PRD1, ΦYeO3 12, and PM2, does not require the target genome to be cloned and is directly applicable to all DNA and RNA viruses that have infective genomes. The method developed yielded valuable novel information on the three bacteriophages studied and whole-genome data can be complemented with concomitant studies on individual genes. Moreover, end-modified transposons constructed for this study can be used to manipulate genomes devoid of suitable restriction sites.

Free energy calculations of glycosaminoglycan - Protein interactions

Glycosaminoglycans (GAGs) are complex highly charged linear polysaccharides that have a variety of roles in biological processes. We report the first use of molecular dynamics (MD) free energy calculations using the MM/PBSA method to investigate the binding of GAGs to protein molecules, namely the platelet endothelial cell adhesion molecule 1 (PECAM-1) and annexin A2. Calculations of the free energy of the binding of heparin fragments of different sizes reveal the existence of a region of low GAG-binding affinity in domains 5-6 of PECAM-1 and a region of high affinity in domains 2-3, consistent with experimental data and ligand-protein docking studies. A conformational hinge movement between domains 2 and 3 was observed, which allows the binding of heparin fragments of increasing size (pentasaccharides to octasaccharides) with an increasingly higher binding affinity. Similar simulations of the binding of a heparin fragment to annexin A2 reveal the optimization of electrostatic and hydrogen bonding interactions with the protein and protein-bound calcium ions. In general, these free energy calculations reveal that the binding of heparin to protein surfaces is dominated by strong electrostatic interactions for longer fragments, with equally important contributions from van der Waals interactions and vibrational entropy changes, against a large unfavorable desolvation penalty due to the high charge density of these molecules.

Free energy calculations of the interactions of c-Jun-based synthetic peptides with the c-Fos protein

The c-Fos–c-Jun complex forms the activator protein 1 transcription factor, a therapeutic target in the treatment of cancer. Various synthetic peptides have been designed to try to selectively disrupt the interaction between c-Fos and c-Jun at its leucine zipper domain. To evaluate the binding affinity between these synthetic peptides and c-Fos, polarizable and nonpolarizable molecular dynamics (MD) simulations were conducted, and the resulting conformations were analyzed using the molecular mechanics generalized Born surface area (MM/GBSA) method to compute free energies of binding. In contrast to empirical and semiempirical approaches, the estimation of free energies of binding using a combination of MD simulations and the MM/GBSA approach takes into account dynamical properties such as conformational changes, as well as solvation effects and hydrophobic and hydrophilic interactions. The predicted binding affinities of the series of c-Jun-based peptides targeting the c-Fos peptide show good correlation with experimental melting temperatures. This provides the basis for the rational design of peptides based on internal, van der Waals, and electrostatic interactions.

Calculations of the free energy of interaction of the c-Fos−c-Jun coiled coil: Effects of the solvation model and the inclusion of polarization effects

The leucine zipper region of activator protein-1 (AP-1) comprises the c-Jun and c-Fos proteins and constitutes a well-known coiled coil protein−protein interaction motif. We have used molecular dynamics (MD) simulations in conjunction with the molecular mechanics/Poisson−Boltzmann generalized-Born surface area [MM/PB(GB)SA] methods to predict the free energy of interaction of these proteins. In particular, the influence of the choice of solvation model, protein force field, and water potential on the stability and dynamic properties of the c-Fos−c-Jun complex were investigated. Use of the AMBER polarizable force field ff02 in combination with the polarizable POL3 water potential was found to result in increased stability of the c-Fos−c-Jun complex. MM/PB(GB)SA calculations revealed that MD simulations using the POL3 water potential give the lowest predicted free energies of interaction compared to other nonpolarizable water potentials. In addition, the calculated absolute free energy of binding was predicted to be closest to the experimental value using the MM/GBSA method with independent MD simulation trajectories using the POL3 water potential and the polarizable ff02 force field, while all other binding affinities were overestimated.

Material characterisation and numerical modelling of gypsum plasterboards in fire

The fire resistance characteristic of LSF wall systems mainly depends on the protective linings in use, commonly gypsum plasterboards. However, unclassified boards with varying composition and more notably with ambiguous thermal properties are increasingly becoming available in the market. Therefore a study was undertaken with an aim to set minimum standards for fire protective boards used in LSF wall applications. This paper presents the details of this study based on material characterisation and finite element thermal modelling of the most commonly used fire protective board, gypsum plasterboards, to address these critical issues related to fire safety design. In the material characterisation phase of this study, thermal properties of three different gypsum plasterboards manufactured in Australia were measured, analysed and compared. Subsequently, it proposes a thermal property based “k-factor” capable of giving an overall measure of the fire performance of boards, so that it can be used in appropriately classifying fire protective boards. As it is not known how this factor relates to the overall fire performance of LSF wall systems, numerical models were also developed and used to simulate the performance of LSF walls exposed to the standard fire. Finally, a correlation between time-temperature profiles from numerical analyses and calculated k-factors was established.