Effect of time-temperature binomial in obtaining biochemical oxygen demand of different wastewaters

Studies on the effects of temperature and time of incubation of wastewater samples for the estimation of biodegradable organic matter through the biochemical oxygen demand (BOD), that nowadays are rare, considering that the results of the classic study of STREETER & PHELPS(1925) have been accepted as standard. However, there are still questions how could be possible to reduce the incubation time; whether the coefficient of temperature (θ) varies with the temperature and with the type of wastewater and if it approaches 1.047. Aiming the elucidation of these questions, wastewater samples of dairy, swine and sewage treated in septic tanks were incubated at temperatures of 20, 30 and 35 °C, respectively for 5, 3.16 and 2.5 days. From the parameter of deoxygenation coefficient at 20 °C (k20), θ30 and θ35 were calculated. The results indicated that θ values changes with the type of wastewater, however does not vary in the temperature range between 30 and 35 °C, and that the use of 1.047 value did not implied significant differences in obtaining k in a determined T temperature. Thus, it is observed that the value of θ can be used to estimate the required incubation time of the samples at different temperatures.

Solar energy use for water pre-heating in boilers of agro-industries

Energy consumption in the world has been growing every year. The industrial sector represents 27.32% of the world energy demand. Heating systems that use solar energy may contribute with a percentage of the total energy required by industries. This work aimed to study the use of vacuum solar collectors for water pre-heating in boilers. We used four collectors installed according to NBR 15,569; water flow through the tubes was 0.058 L/s, and temperature in the inlet and outlet pipes was measured. Results showed that instantaneous radiation, and inlet fluid and room temperatures are variables that influence the process, reaching water maximum temperature in the solar collector outlet of 97.9 °C, and efficiency of approximately 65% for most experiments. For the financial viability evaluation, the payback study was applied, which resulted in 4; 7 and 5 years, for the respective sources: firewood, LPG (liquefied petroleum gas), and electricity. Regarding the calculation of the annual contribution to the reduction of greenhouse gases, it was, respectively, 2.162 and 356 kg of CO2 per m² of collector tubes, in comparison with firewood and LPG.

Energy demand in citrus production under varied operational efficiency values

Citrus orchards are very important in Brazil, especially in São Paulo State, where occupy an area of 600,000 ha approximately. To identify sustainability degree of citrus production system, an energy analysis allows evaluating efficiency of direct and indirect applied inputs. Thus, this study aimed to evaluate citrus production system under energetic point of view, in which invested energy is paid back with citrus production; being compared within three scenarios for operational field efficiency. As result, by sensitivity analysis was determined that fuel was the main energy demander, followed by pesticides and fertilizers. In operational work capacity analysis, all combinations between efficiency (minimum, typical and maximum) and yield levels became positive in the seventh year, except for the combination minimum efficiency and 10 % less yield, positive in the eighth year. The best combination (maximum efficiency and 10 % more yield) has promoted investment payoff around the sixth and seventh year. By this study, it is possible to determine the total energy demand to produce citrus and indentify the applied inputs that need more attention by the decision-makers. Labor and seedlings can be ommited for further studies with citrus, since they were irrelevant. Management of agricultural machinery may pose an important role on decreasing environmental impact of citrus production.

Performance of small wind turbines: simulation of electricity supply to loads connected to the public or isolated grid

ABSTRACT The successful in the implementation of wind turbines depends on several factors, including: the wind resource at the installation site, the equipment used, project acquisition and operational costs. In this paper, the production of electricity from two small wind turbines was compared through simulation using the computer software HOMER - a national model of 6kW and an imported one of 5kW. The wind resources in three different cities were considered: Campinas (SP/BR), Cubatão (São Paulo/BR) and Roscoe (Texas/ USA). A wind power system connected to the grid and a wind isolated system - batteries were evaluated. The results showed that the energy cost ($/kWh) is strongly dependent on the windmill characteristics and local wind resource. Regarding the isolated wind system – batteries, the full supply guarantee to the simulated electrical load is only achieved with a battery bank with many units and high number of wind turbines, due to the intermittency of wind power.

Driver of Demand in Cargo and Passenger Traffic Between Penta Ports

Maritime transport moves around 6 billion tonnes of freight every year. The freight consists of liquid bulks (45%), dry bulks (23%) and general cargo (32%). Freight traffic and transports chains vary according to region, commodity and the origin and the destination of freight. In the European Union the ports sector handles over 90% of the trade with third countries. The share of intra-EU trade is approximately 30% of the total transportation and the number of passengers is over 200 million every year. The Baltic Sea has more than 50,000 vessels a year pass the Skaw at the northernmost tip of Denmark on their way into or out of the Baltic. Roughly 60% to 70% of these vessels are cargo vessels and 17% to 25% tankers. Ports and maritime transport play a crucial role in global commerce today. Today’s business environment is changing rapidly, and the constant changes create challenges for the transport industry and maritime traffic. Ports have to adapt to continuous changes in economic structures, logistics demands, and people’s travel and leisure patterns. In order to ensure the competitiveness of sea connections, the ports need to fully enhance multilateral cross-border understanding and cooperation. In this report the focus is on liner traffic between five ports in the Central Baltic Region: Stockholm, Tallinn, Helsinki Turku and Naantali. The report defines the drivers of the demand for cargo and passenger traffic and highlights the most important factors. The economic situation and foreign trade of each county are elaborated on with detailed information about the flows of traffic between the five ports. Based on expert interviews, the main characteristics of each port, including strengths and weaknesses, are presented. The report is based on primary and secondary data. Primary data was received through interviews and mail surveys. Secondary data was attained through a literature research, statistics, data given by the PENTA ports and webpages. The report is divided into two main parts: the drivers creating the demand for transport and the results of current cargo and passenger flows between PENTA ports.

Business on demand and its mobile solution - study with SAP ByDesign

Business On-Demand solutions are widely used by SMEs in the world today. When I started working in SAP, SAP had just launched its first version mobile solutions for Business On-Demand solutions. SAP ByDesign mobile solution is great, but I believe we could do something even better on mobile phones. My job is focusing on mobile application development. Therefore, I have lots of thoughts about how we could make the mobile solutions better serve desktop solutions and how to distinguish the mobile solutions. Finally I decide to have a further research into this area. The purpose of this thesis is trying to find out how to improve the mobile solutions for Business On-Demand, find out its benefit and limits, and distinguish SaaS mobile solutions from desktop ones. In order to conduct this research, I had some online literature search to find out the Business On-Demand market and major players in this area. I compare the materials from public internet with the ones that are used internally in SAP. I had some interviews with SAP solution manager and SAP‟s potential customers. I finally made some pro-posals for mobile SaaS solutions which I believe will make the solutions better present and much helpful to the customers.

The demand for global student talent: Capitalizing on the value of university-industry collaboration

The university sector in Europe has invested money and effort into the internationalization of higher education. The benefits of internationalizing higher education are fuelled by changing global values, choices and practices. However, arguments that serve the internationalization of higher education tend to stress either local organizational or individual interests; seldom do they emphasize the societal benefits. This dissertation investigates how collaboration between university and industry facilitates a shift in thinking about attracting and retaining global student talent, in terms of co-creating solutions to benefit the development of our knowledge society. The macro-structures of the higher education sector have the tendency to overemphasize quantitative goals to improve performance verifiability. Recruitment of international student talent is thereby turned into a mere supply issue. A mind shift is needed to rethink the efficacy of the higher education sector with regard to retaining foreign student talent as a means of contributing to society’s stock of knowledge and through that to economic growth. This thesis argues that academic as well as industrial understanding of the value of university-industry collaboration might then move beyond the current narrow expectations and perceptions of the university’s contribution to society’s innovation systems. This mind shift is needed to encourage and generate creative opportunities for university-industry partnerships to develop sustainable solutions for successful recruitment of foreign student talent, and thereby to maximize the wealth-creating potential of global student talent recruitment. This thesis demonstrates through the use of interpretive and participatory methods, how it is possible to reveal new and important insights into university-industry partnering for enhancing attraction and retention of global student talent. It accomplishes this by expressly pointing out the central role of human collaborative experiencing and learning. The narratives presented take the reader into a Finnish and Dutch universityindustry partnering environment to reflect on the relationship between the local universities of technology and their operational surroundings, a relationship that is set in a context of local and global entanglements and challenges.

Structural and operational optimisation : applications in energy systems

In this work mathematical programming models for structural and operational optimisation of energy systems are developed and applied to a selection of energy technology problems. The studied cases are taken from industrial processes and from large regional energy distribution systems. The models are based on Mixed Integer Linear Programming (MILP), Mixed Integer Non-Linear Programming (MINLP) and on a hybrid approach of a combination of Non-Linear Programming (NLP) and Genetic Algorithms (GA). The optimisation of the structure and operation of energy systems in urban regions is treated in the work. Firstly, distributed energy systems (DES) with different energy conversion units and annual variations of consumer heating and electricity demands are considered. Secondly, district cooling systems (DCS) with cooling demands for a large number of consumers are studied, with respect to a long term planning perspective regarding to given predictions of the consumer cooling demand development in a region. The work comprises also the development of applications for heat recovery systems (HRS), where paper machine dryer section HRS is taken as an illustrative example. The heat sources in these systems are moist air streams. Models are developed for different types of equipment price functions. The approach is based on partitioning of the overall temperature range of the system into a number of temperature intervals in order to take into account the strong nonlinearities due to condensation in the heat recovery exchangers. The influence of parameter variations on the solutions of heat recovery systems is analysed firstly by varying cost factors and secondly by varying process parameters. Point-optimal solutions by a fixed parameter approach are compared to robust solutions with given parameter variation ranges. In the work enhanced utilisation of excess heat in heat recovery systems with impingement drying, electricity generation with low grade excess heat and the use of absorption heat transformers to elevate a stream temperature above the excess heat temperature are also studied.

Aurinkosähköjärjestelmien vieminen Afrikan kehittyviin maihin

Aurinkosähköjärjestelmien käyttäminen sähkön tuotannossa on kasvanut viime vuosina teknologian hinnan laskun ja tiukentuvien ympäristömääräyksien seurauksena. Monet aurinkosähköön keskittyvät yritykset etsivät uusia markkinoita Afrikan kehittyvistä maista. Aurinkosähkön avulla voidaan vastata kehittyvien maiden kasvavaan sähköntarpeeseen ja samalla vähentää maiden hiilidioksidipäästöjä sekä nostaa maiden kehittyvää elintasoa. Tässä työssä tutkitaan aurinkosähköjärjestelmien viemistä kahteen Afrikan kehittyvään maahan Tansaniaan ja Etelä-Afrikkaan. Työn tavoitteena on kohdemaiden liiketoimintaympäristöjen tutkiminen ja markkinapotentiaalin selvittäminen suomalaisen sähkö- ja automaatiotekniikkaan keskittyvän pk-yrityksen näkökulmasta. Työssä selvitetään Tansanian ja Etelä-Afrikan liiketoimintaympäristöjen ja aurinkosähkömarkkinoiden erityispiirteet. Tuloksissa käsitellään myös sopivinta kansainvälistymistapaa tutkitulle pk-yritykselle sekä haasteita, joita yritys kohtaa Afrikan markkinoilla. Kansainvälistymismalleista tutkimuksessa käsitellään Uppsala-mallia ja verkostomallia.

Paperitehtaan sähkötasehallinta ja sähkön kysyntäjousto energiakustannusten hallinnassa

Paperiteollisuus on energiaintensiivistä teollisuutta, jossa on tehty pitkään työtä tuotantoprosessien energiatehokkuuden parantamiseksi. Paperitehtaan energiakustannuksiin voidaan kuitenkin vaikuttaa myös sähkötaseen hallinnalla ja sähkön kysyntäjouston avulla. Tehtaan seuraavan vuorokauden sähkön kulutus pyritään ennustamaan mahdollisimman tarkasti, mutta esimerkiksi paperitehtaan häiriötilanteissa sähkötase poikkeaa ennustetusta. Tällöin sähkötasetta voidaan korjata ensisijaisesti sähkön jälkimarkkinoiden eli Elbas- kaupankäynnin avulla. Ellei tasetta saada korjattua sähkön jälkimarkkinoilla tase-ero korjataan tasesähköllä, jonka hinta muodostuu säätösähkömarkkinoilla. Tasesähkön hinta saattaa poiketa Elspot- markkinahinnasta voimakkaasti, jolloin tase-erosta joko hyödytään tai hävitään kustannusmielessä. Tämän työn tarkoituksena on selvittää sähkötasehallinnan parantamisen ja sähkön kysyntäjouston vaikutukset paperitehtaan energiakustannuksiin. Työssä tutkittiin tehtaan sähkö-tasehallinnan nykytilannetta ja selvitettiin tase-erojen kustannusvaikuttavuutta. Lisäksi työssä luotiin ajomalleja sähkön kysyntäjouston toteuttamiselle massatehtaan eri tuotantoprosesseille, sekä määritettiin rajahintoja seuraavan vuorokauden energiaennusteeseen. Onnistunut energiaennuste perustuu paperitehtaan käynnin tarkkoihin ja ajankohtaisiin lähtötietoihin. Sähkötaseen poikkeamiin voidaan puolestaan varautua paremmin, kun informaatio tehtaan prosessien alasajosta tulee voimalaitoksen tietoon mahdollisimman aikaisin. Sähkötaseen poikkeamien hallinta voidaan tehdä, joko Elbas- kaupan tai tasesähkön avulla. Ajankohdasta ja tasepoikkeaman volyymista riippuen täytyy tehdä valinta, kumpi vaihtoehdoista on kustannusmielessä kannattavampi. Paperitehtaan eri prosesseille luoduilla ajomalleilla saatiin esiin huomattava säästöpotentiaali. Ajomallien noudattaminen vaatii suunnitelmallista tuotannon hallintaa ja sähkön Elspot- hinnan käyttäytymisen säännöllistä seurantaa. Seuraavan vuorokauden rajahintatietojen määrittämisen pohjalta voidaan arvioida, millä Elspot- hinnalla sähkön myynti muuttuu paperin tuotantoa kannattavammaksi.

Designing a Demand Forecasting Process in the Fast Moving Consumer Goods Context

The purpose of this thesis was to study the design of demand forecasting processes. A literature review in the field of forecasting was conducted, including general forecasting process design, forecasting methods and techniques, the role of human judgment in forecasting and forecasting performance measurement. The purpose of the literature review was to identify the important design choices that an organization aiming to design or re-design their demand forecasting process would have to make. In the empirical part of the study, these choices and the existing knowledge behind them was assessed in a case study where a demand forecasting process was re-designed for a company in the fast moving consumer goods business. The new target process is described, as well as the reasoning behind the design choices made during the re-design process. As a result, the most important design choices are highlighted, as well as their immediate effect on other processes directly tied to the demand forecasting process. Additionally, some new insights on the organizational aspects of demand forecasting processes are explored. The preliminary results indicate that in this case the new process did improve forecasting accuracy, although organizational issues related to the process proved to be more challenging than anticipated.

Etäluentamittareiden tuomat tuotteistamismahdollisuudet sähkönmyyjille

Diplomityön tavoitteena oli selvittää etäluentamittareiden mahdollistamia tuotteita ja palveluita sekä niiden toteutettavuutta Mäntsälän Sähkö Oy:ssä. Työssä perehdytään yksityisasiakkaille suunnattuihin palveluihin, joita mittaritekniikka mahdollistaa. Mittarit tulee olla asennettuna 80%:lle verkkoyhtiön sähkönkäyttöpaikoista vuoteen 2014 mennessä. Mäntsälän Sähköllä mittareiden vaihtoprojektin alkamisen vuoksi haluttiin selvittää mahdollisten uusien tuotteiden toteutettavuutta. Työssä esitellään Mäntsälän Sähkö Oy:lle tulevan mittarijärjestelmän. Mittarijärjestelmä käyttää eri tietoliikennetapoja, jotka ovat GPRS, RS485 ja radio. Työ sisältää internet-paneelina suoritetun asiakaskyselyn, jossa selvitettiin asiakkaiden tarpeita ja mielipiteitä mahdollisten uusien tuotteiden osalta. Työssä käsiteltäviä tuotteita ovat kuormanohjaus, kysynnän hintajousto, spot-hinnoittelu, laskutus sekä raportointipalvelu. Kulutuksen hintajousto, kuormanohjaus ja spot-hinnoittelu toimivat toisiaan tukevina tuotteina. Tasasuuruista laskutusta voisi tarjota toteutuneen kulutuksen mukaisen laskutuksen ohessa lisäpalveluna. Raportointipalvelu internetissä on hyvä tapa toimittaa asiakkaalle lain velvoittamat tiedot.

Value added logistics in supply and demand chain : COSTFIX : New operation model for maintenance material logistics in paper industry

This research report illustrates and examines new operation models for decreasing fixed costs and transforming them into variable costs in the field of paper industry. The report illustrates two cases – a new operation model for material logistics in maintenance and an examination of forklift truck fleet outsourcing solutions. Conventional material logistics in maintenance operation is illustrated and some problems related to conventional operation are identified. A new operation model that solves some of these problems is presented including descriptions of procurement and service contracts and sources of added value. Forklift truck fleet outsourcing solutions are examined by illustrating the responsibilities of a host company and a service provider both before and after outsourcing. The customer buys outsourcing services in order to improve its investment productivity. The mechanism of how these services affect the customer company’s investment productivity is illustrated.

Käyttövesivaraajan ekosuunnitteluvaatimusten merkityksen arvioiminen rakennusten energianhallinnassa

Työn lähtökohtana ovat veden lämmittimiä koskeva ekosuunnittelulainsäädäntö ja sen vaatiman testausjärjestelmän laatiminen. Työn tavoitteena on arvioida ekosuunnittelulainsäädännön vaikutusta varaajan toimintaan osana rakennusten energianhallintaa. Työssä laaditaan käyttövesivaraajalle tuoteryhmäkohtaisen ekosuunnittelulainsäädännön mukainen mittausjärjestelmä energiatehokkuuden, lämpimän veden saannon, vuosittaisen sähkönkulutuksen sekä energiamerkinnän määrittämiseksi. Lisäksi tarkastellaan ekosuunnittelulainsäädännön tarkoituksenmukaisuutta, selvitetään varaajan toimintaperiaatteet sekä keinoja käyttöveden tarvitseman energian vähentämiseksi. Testattu käyttövesivaraaja täyttää ekosuunnitteluvaatimukset. Lämmitysenergian vähentäminen käyttövesivaraajan toimintaa tehostamalla on kuitenkin vaikeaa. Hybridijärjestelmien hyödyntäminen sähkölämmityksen ohella muita energianlähteitä ja esim. käyttöveden lämmöntalteenottoa käyttäen on toimivin keino vähentää käyttöveden energiankulutusta sekä parantaa varaajan energiatehokkuutta. Lämpimän käyttöveden energiankulutuksen osuus rakennuksen energiankulutuksesta kasvaa lainsäädännön pakottamana rakennusten kokonaisenergiankäytön vähentyessä. Ekosuunnittelulainsäädännön suora merkitys rakennusten energianhallintaan on Suomessa vähäistä nykyisen energiatehokkuustason ollessa suhteellisen korkea, jolloin käyttöveden tarvitseman energian vähentämiskeinoina on hyödynnettävä vaihtoehtoisia ratkaisuja.

Verkostoinvestointien optimointi uuden sähkömarkkinalain ympäristössä

Vuonna 2013 uudistunut sähkömarkkinalaki toi sähköverkkoyhtiöille velvoitteen parantaa sähkönjakeluverkkojensa toimintavarmuutta suurhäiriötilanteissa. Toimenpiteet tämän velvoitteen täyttämiseksi näkyvät merkittävinä verkostoinvestointeina. Diplomityössä tarkastellaan uudistuneen sähkömarkkinalain tuomia vaikutuksia Imatran Seudun Sähkön jakeluverkkoa koskeviin verkostoinvestointeihin. Päätavoitteena on selvittää, millaisia toimenpiteitä uuden sähköntoimitusvarmuustason vaatimusten täyttämiseksi tarvitaan ja mitkä ovat optimaaliset ratkaisut näiden toimenpiteiden toteuttamiseksi. Uudella sähköntoimitusvarmuustasolla on vaikutusta jakeluverkon rakennemuutoksiin tulevien 15 vuoden aikana, mutta näiden rakennemuutosten vaikutukset kantavat useiden kymmenien vuosien päähän.