Analysis of interrelationships between critical waste factors in office building retrofit projects using interpretive structural modelling

The number of office building retrofit projects is increasing. These projects are characterised by processes which have a close relationship with waste generation and therefore demand a high level of waste management. In a preliminary study reported separately, we identified seven critical factors of on-site waste generation in office building retrofit projects. Through semi-structured interviews and Interpretive Structural Modelling, this research further investigated the interrelationships among these critical waste factors, to identify each factor’s level of influence on waste generation and propose effective solutions for waste minimization. “Organizational commitment” was identified as the fundamental issue for waste generation in the ISM system. Factors related to plan, design and construction processes were found to be located in the middle levels of the ISM model but still had significant impacts on the system as a whole. Based on the interview findings and ISM analysis results, some practical solutions were proposed for waste minimization in building retrofit projects: (1) reusable and adaptable fit-out design; (2) a system for as-built drawings and building information; (3) integrated planning for retrofitting work process and waste management; and (4) waste benchmarking development for retrofit projects. This research will provide a better understanding of waste issues associated with building retrofit projects and facilitate enhanced waste minimization.

Seat Comfort. M2-M3

This (seat) attribute target list and Design for Comfort taxonomy report is based on the literature review report (C3-21, Milestone 1), which specified different areas (factors) with specific influence on automotive seat comfort. The attribute target list summarizes seat factors established in the literature review (Figure 1) and subsumes detailed attributes derived from the literature findings within these factors/classes. The attribute target list (Milestone 2) then provides the basis for the “Design for Comfort” taxonomy (Milestone 3) and helps the project develop target settings (values) that will be measured during the testing phase of the C3-21 project. The attribute target list will become the core technical description of seat attributes, to be incorporated into the final comfort procedure that will be developed. The Attribute Target List and Design for Comfort Taxonomy complete the target definition process. They specify the context, markets and application (vehicle classes) for seat development. As multiple markets are addressed, the target setting requires flexibility of variables to accommodate the selected customer range. These ranges will be consecutively filled with data in forthcoming studies. The taxonomy includes how and where the targets are derived, reference points and standards, engineering and subjective data from previous studies as well as literature findings. The comfort parameters are ranked to identify which targets, variables or metrics have the biggest influence on comfort. Comfort areas included are seat kinematics (adjustability), seat geometry and pressure distribution (static comfort), seat thermal behavior and noise/vibration transmissibility (cruise comfort) and eventually material properties, design and features (seat harmony). Data from previous studies is fine tuned and will be validated in the nominated contexts and markets in follow-up dedicated studies.

Nanomorphology influence on the light conversion mechanisms in highly efficient diketopyrrolopyrrole based organic solar cells

In this work, diketopyrrolopyrrole-based polymer bulk heterojunction solar cells with inverted and regular architecture have been investigated. The influence of the polymer:fullerene ratio on the photoactive film nanomorphology has been studied in detail. Transmission Electron Microscopy and Atomic Force Microscopy reveal that the resulting film morphology strongly depends on the fullerene ratio. This fact determines the photocurrent generation and governs the transport of free charge carriers. Slight variations on the PCBM ratio respect to the polymer show great differences on the electrical behavior of the solar cell. Once the polymer:fullerene ratio is accurately adjusted, power conversion efficiencies of 4.7% and 4.9% are obtained for inverted and regular architectures respectively. Furthermore, by correlating the optical and morphological characterization of the polymer:fullerene films and the electrical behavior of solar cells, an ad hoc interpretation is proposed to explain the photovoltaic performance as a function of this polymer:blend composition.

Characteristics of high-performance ambipolar organic field-effect transistors based on a diketopyrrolopyrrole-benzothiadiazole copolymer

In this paper, we report the device characteristics of ambipolar thin-film transistors (TFTs) based on a diketopyrrolopyrrole-benzothiadiazole copolymer. This polymer semiconductor exhibits the largest comparable electron and hole mobility values in a single organic semiconductor. The key to realizing such high mobility values, which are $0.5&cm}{2}/\hbox{V}̇\hbox{s, is molecular design, i.e., the use of suitable surface treatments of the source/drain contact electrodes and device architectures, particularly top-gate configurations. The subthreshold characteristics of the TFT devices are greatly improved by the use of dual-gate device geometry. We also report the first measurement of the velocity distribution of electron and hole velocities in an ambipolar organic semiconductor.

“My hands are plunged in oranges”…: an experiential account of a working process

This presentation incorporated the live performance throughout, by the author, of movement from “The All Weather Project” by Liz Roche. Movement sections are indicated by italics. “I am going to start by dancing for you… Movement: Live performance of solo approximately 10 minutes in duration This is the introduction... Through my PhD research, I am examining the choreographic process from the perspective of the independent contemporary dancer, through embodying this role as a researcher/participant. My methodological frameworks, which utilise video documentation and journal writing, could be characterised as ethnographic, multi-modal embodied theorising, leading to “multi-dimensional theorising” (I adopt this term from Susan Melrose). In this way, I am unwinding the embodied practice of dancing, through the co-existent layers of experience, towards forming a theoretical understanding of the issues that arise for the dancer. The issues that I have identified as relevant to my research are those relating to the dancer’s ‘moving identity’ or way of moving, as a mutable and adaptable form that must alter and re-adjust to each different choreographic engram or movement vocabulary, that she/he encounters. I am examining this interplay between stability and change. I also reflect on the impact of destabilisation and flux on the dancer’s identity in a wider sense, as she/he relates outwardly to signifying factors within the social strata. Today I am going to bring you through a reflection on the working process of a dance piece as experienced from the inside. By doing so, I hope to capture and elucidate the multi-dimensional layers which existed for me within this process. Through displaying these fragments together, I endeavour to invoke the ‘totality’ of the experience...

Development of an education program to improve care of patients with dementia in an acute care setting

As the population ages, the number of people with dementia in acute care environments is projected to increase rapidly. However, many acute care nurses have undertaken little or no dementia training, potentially leading to reduced quality of care for these patients. This article details the development and delivery of a tailored education program to improve the quality of care of people with dementia in a large, urban hospital in Australia. Designed specifically for the existing context, environment and knowledge levels, the program was developed from multiple inputs, including: expert opinion, literature on workplace and dementia care training, and feedback from participants. The program was delivered to acute care nurses and allied health staff within an outcome based, microteaching model. The broader applicability of the development and delivery techniques used in this program is also discussed.

Statistics at play

Three core components in developing children’s understanding and appreciation of data — establish a context, pose and answer statistical questions, represent and interpret data — lay the foundation for the fourth component: use data to enhance existing context.

Navigating emotion research during a paradigm shift in psychology

Human emotional responses are highly individual. A comprehensive analysis of emotion research in cognitive psychology and physiology, including laboratory-based experiments, showed that understanding human emotions requires a dynamic systems approach incorporating insights from scientific disciplines beyond psychology. Importantly, subjective and automatic evaluations of emotive information are context-sensitive and changeable, confirming the dynamic nature of emotion and role of individual differences. Furthermore, a comparison of different statistical approaches established that statistical estimation, rather than averages, best captures our highly individual emotional responses. Emotion research needs a cross-disciplinary approach.

Claire Renzetti (2013) Feminist Criminology. London, UK:Routledge

Feminist Criminology, a recent addition to the suite of slimline Key Ideas in Criminology Series (Routledge), captures and retrospectively unpacks the complexity, diversity and essence of feminist criminology. Claire Renzetti provides a rich, engaging and thought‐provoking account, taking the reader on a journey encompassing the historical, legal, sociological and psychological dimensions that examine the context, synergies and disjunctions among past, present and future feminist criminologies. Her unique approach considers the micro and macro dimensions of, and impact within, the discipline, academy, criminal justice system and society more broadly. Emphasising the fluidity underpinning feminist perspectives, Renzetti contends that ‘there is no single unitary perspective in criminology’, with feminist criminology offering ‘a diverse collection of theoretical perspectives and methods’ (p. 99). Opting for the path less travelled and rejecting the marginalising of feminist criminology with the notional ‘add and stir’ approach, Renzetti advocates moving beyond a tolerance approach to one that embeds analyses of gender, ‘race’ and class within mainstream criminological research paradigms. Charting the development of feminist criminology from the 1970s to the present, Renzetti offers ‘an assessment of criminology’s potential for shaping the future of our discipline’ and the practice of criminal justice (p. 1). Feminist Criminology is organised into five chapters, each progressing concise summaries of feminist approaches, contributions to criminological practice, and shifting academic landscapes; the text concludes with an appraisal of future directions for feminist criminology.

Proactive behavior-based safety management for construction safety improvement

Construction is one of the most hazardous industries due to its dynamic, temporary, and decentralized nature. The Hong Kong Commissioner for Labor identifies worker behavior as the root cause of construction accidents. Behavior-based safety (BBS) is one effective approach in managing employee safety issues. However, there is little research on the application of BBS in the construction industry. This research proposes an extension of the BBS approach, proactive behavior-based safety (PBBS), to improve construction safety. PBBS integrates the theory of BBS with the technology of Proactive Construction Management System (PCMS). The innovations of PBBS are: (1) automatically monitoring location-based behaviors; (2)quantitatively measuring safety performance; (3) investigating potential causes of unsafe behaviors; and (4) improving the efficiency of safety management. A pilot study of a Hong Kong construction site practicing PBBS was conducted. The experiment results showed that PBBS performed well on construction accident prevention and the Safety Index (SI) of the two project teams, with increased improvements by 36.07% and 44.70% respectively. It is concluded that PBBS is effective and adaptable to construction industry.

Jacopo Bassano freskomaalarina : Cartiglianon ja Enegon kirkkojen freskot: konteksti, rekonstruktio ja tulkinta

The object of this study is Jacopo Bassano (c. 1510 1592) as a fresco painter and the significance of frescoes in his late production. The research focuses on the only surviving cycle of frescoes of his later years in the Cartigliano parish church, bearing the date 1575. The other cycle studied here was painted for the 16th century parish church of Enego. It contained one of the most extensive fresco decorations executed by Jacopo Bassano together with his eldest son Francesco. However, nothing has survived of the fresco cycle and the ceiling paintings of the church, nor is any visual documentation of them left. Only the small altarpiece attributed to Jacopo Bassano and depicting Saints Justine, Sebastian, Anthony Abbott, and Roch (dated to c. 1555/1560) has been preserved. I have suggested that the frescoes of the Cartigliano parish church should be examined in the interpretational context of the spirituality of the post-Tridentine period. This period frames the historical context for the frescoes and functions as a basis for the iconographical interpretation that I have proposed. I have shown that the iconographic programme of the frescoes in the choir of the Cartigliano parish church has obvious points of contact with the Catholic doctrines reconfirmed by the Council of Trent (1545 1563). I also argue that the fresco cycle and the ceiling paintings of the Enego church should be placed in the same interpretational context as the frescoes of Cartigliano. I present a reconstruction of the frescoes in the choir attributed to Jacopo Bassano and of those on the walls of the nave attributed to his son Francesco Bassano. According to my reconstruction, the frescoes in the choir and nave walls formed a coherent cycle with a unitary iconographic programme which included the 28 paintings with Old Testament subjects in the nave ceiling. The reconstruction includes the dating and the iconography of the fresco programme and its interpretative basis. The reconstruction is based on visitation records and inventories from the 16th and 17th centuries as well as on the oldest relevant literature, namely the descriptions offered by Carlo Ridolfi (1648) and G. B. Verci (1775). I also consider the relationship of the large compositional sketches attributed to Jacopo Bassano and depicting Christological subjects to the lost frescoes in Enego. These studies have been executed with coloured chalks, and many of them are also dated 1568 or 1569 by the painter. I suggest in this study that these large studies in coloured chalks were preparatory drawings for the fresco cycle in Enego, depicting scenes from the life and suffering of Christ. All the subjects of the aforesaid drawings were included in the Enego cycle.

Kohti ulkorajoja : Lukion toimintakulttuurikuvaus ohjauksen ja johtamisen näkökulmasta

The aim of this qualitative study is to chart the operational context of the upper-secondary school principals and the historical, cultural and structural factors that steer their day-to-day work. The concepts regarding the study environment and operational culture are defined and analysed in terms of how they are interrelated. Furthermore it is explained why the upper-secondary schools must describe their operational culture within the curriculum. The study also aims to connect the description of the operational culture with the operational system of the upper-secondary school and to analyse the descriptions of the five upper-secondary schools in relation to the commitment to developing a study environment conducive to learning and participation, as well as conducive to supporting interaction. Interview data is used to provide the background for the description of the operational culture and to particularise the results of the analysis. According to the theory used in this study, the steering sources of the day-to-day work of the upper-secondary school are the rules system of the state, the municipality, the curriculum, and on the level of the upper-secondary school administration. The research data consist of the literature concerning the steering, steering forms and the principals professional picture in general terms, from 1950 to the present, and the steering texts concerning the educational environment and operational culture. Furthermore the research data include five descriptions of the operational culture concerning the upper-secondary school, the action reports and student guides. The methods of analysis include the level model and content analysis. The first is a part of the theory used in this study. For the purpose of content analysis, moreover, classifying grounds are established on the basis of theoretical and empirical research data. A result of this study is that, from the perspective of steering, the function of describing the operational culture is clearly linked to the evaluation supporting the goals and the vision of a learning organization. From an administrative point of view, a description is a problem-solving strategy and an instrument of evaluation. The study environment is a structural context in and through which the actors of the school create, change and renew the elements of the structure rooted in the context; this structure is their historically and culturally mediated way of thinking and acting. The initial situation and orientation of the students affect the emphasis of the operational culture descriptions; principals also have their own personal style of leadership. Key words: source of steering, educational environment, operational culture, self-evaluation, learning organisation

Using catch rate data for simple cost-effective quota setting in the Australian spanner crab (Ranina ranina) fishery.

For many fisheries, there is a need to develop appropriate indicators, methodologies, and rules for sustainably harvesting marine resources. Complexities of scientific and financial factors often prevent addressing these, but new methodologies offer significant improvements on current and historical approaches. The Australian spanner crab fishery is used to demonstrate this. Between 1999 and 2006, an empirical management procedure using linear regression of fishery catch rates was used to set the annual total allowable catch (quota). A 6-year increasing trend in catch rates revealed shortcomings in the methodology, with a 68% increase in quota calculated for the 2007 fishing year. This large quota increase was prevented by management decision rules. A revised empirical management procedure was developed subsequently, and it achieved a better balance between responsiveness and stability. Simulations identified precautionary harvest and catch rate baselines to set quotas that ensured sustainable crab biomass and favourable performance for management and industry. The management procedure was simple to follow, cost-effective, robust to strong trends and changes in catch rates, and adaptable for use in many fisheries. Application of such “tried-and-tested” empirical systems will allow improved management of both data-limited and data-rich fisheries.

Contemplating Knudsen's Baseline: Where small is not so beautiful

Does the Internet's World Wide Web (the web) represent an opportunity or threat to the small firms of the world? In line with recent calls for entrepreneurship research to adopt a more evolutionary approach, this article considers the context, process, and possible outcomes of small place-based firms operating in a web-impacted environment. Despite initial optimism that the web would provide a level-playing field for firms of all sizes, little evidence exist to support such a notion. When the learning abilities deemed necessary to exploit the web are considered, it would seem that only the most entrepreneurial of small firms would likely adapt to web-impacted environments. It is concluded that the present rate of web-based change represents a unique and valuable research opportunity for entrepreneurship researchers.

Viivesietoisten verkkojen nykytila ja tulevaisuuden haasteet

Delay and disruption tolerant networks (DTNs) are computer networks where round trip delays and error rates are high and disconnections frequent. Examples of these extreme networks are space communications, sensor networks, connecting rural villages to the Internet and even interconnecting commodity portable wireless devices and mobile phones. Basic elements of delay tolerant networks are a store-and-forward message transfer resembling traditional mail delivery, an opportunistic and intermittent routing, and an extensible cross-region resource naming service. Individual nodes of the network take an active part in routing the traffic and provide in-network data storage for application data that flows through the network. Application architecture for delay tolerant networks differs also from those used in traditional networks. It has become feasible to design applications that are network-aware and opportunistic, taking an advantage of different network connection speeds and capabilities. This might change some of the basic paradigms of network application design. DTN protocols will also support in designing applications which depend on processes to be persistent over reboots and power failures. DTN protocols could also be applicable to traditional networks in cases where high tolerance to delays or errors would be desired. It is apparent that challenged networks also challenge the traditional strictly layered model of network application design. This thesis provides an extensive introduction to delay tolerant networking concepts and applications. Most attention is given to challenging problems of routing and application architecture. Finally, future prospects of DTN applications and implementations are envisioned through recent research results and an interview with an active researcher of DTN networks.