Selecting green suppliers based on GSCM practices: Using fuzzy TOPSIS applied to a Brazilian electronics company

Due to an increased awareness and significant environmental pressures from various stakeholders, companies have begun to realize the significance of incorporating green practices into their daily activities. This paper proposes a framework using Fuzzy TOPSIS to select green suppliers for a Brazilian electronics company; our framework is built on the criteria of green supply chain management (GSCM) practices. An empirical analysis is made, and the data are collected from a set of 12 available suppliers. We use a fuzzy TOPSIS approach to rank the suppliers, and the results of the proposed framework are compared with the ranks obtained by both the geometric mean and the graded mean methods of fuzzy TOPSIS methodology. Then a Spearman rank correlation coefficient is used to find the statistical difference between the ranks obtained by the three methods. Finally, a sensitivity analysis has been performed to examine the influence of the preferences given by the decision makers for the chosen GSCM practices on the selection of green suppliers. Results indicate that the four dominant criteria are Commitment of senior management to GSCM; Product designs that reduce, reuse, recycle, or reclaim materials, components, or energy; Compliance with legal environmental requirements and auditing programs; and Product designs that avoid or reduce toxic or hazardous material use. © 2013 Elsevier B.V. All rights reserved.

Experiences gained from GDDS compliance in the English-speaking Caribbean

Includes bibliography

Sistema de auditoria no SUS: análise dos dados de produção e glosas no serviço odontológico na rede pública

Pós-graduação em Odontologia Preventiva e Social - FOA

Cleaner Production initiatives and challenges for a sustainable world: an introduction to this special volume

This special volume of the Journal of Cleaner Production is comprised of articles presented at the 3rd International Workshop Advances in Cleaner Production held in Sao Paulo, Brazil, in 2011. The content underscores the recognition of the pressing and inescapable need for making changes from unsustainable to sustainable production and consumption patterns. The 48 articles from 15 countries provide different, but complimentary approaches to help industrial and societal sectors in advancing on their paths towards sustainability. Initiatives and challenges are included, which systematically address problems affecting raw material changes, technological modifications, product and policy changes. The findings range from proposals for alternative uses of wastes, substitution of raw materials for environmentally friendlier substances, optimization of industrial processes by source reductions of wastes and emissions and documented economic and environmental advantages of a wide array of initiatives. The roles of operational and managerial practices are also stressed, highlighting the role of diverse stakeholders as promoters of implementation and internalization of innovative cleaner technologies within companies. Systemic assessment tools are employed and experimented with in order to more effectively evaluate the environmental performance of systems on the biosphere scale. The methodological procedures and proposals presented can help in the design and management of production systems, for governmental and corporate policy development, for implementing and monitoring CP Programs, prevention and mitigation strategies, and evaluation of the outcomes of CP initiatives in the production and service sectors. (C) 2013 Elsevier Ltd. All rights reserved.

Acidentes graves fatais no trabalho de corte mecanizado de cana-de-açucar: o olhar através do método mapa

Pós-graduação em Saúde Coletiva - FMB

Evidências da relação entre evolução da gestão ambiental e a adoção de práticas de Green Supply Chain Management no setor eletroeletrônico brasileiro

The objective of this research is to examine if the environmental management evolution is positively related towards the adoption of green supply chain management practices (GSCM) by companies in the electronics sector in Brazil. To reach this objective, a quantitative research was conducted by survey with 100 companies in the electronics sector in Brazil. The collected data were processed using descriptive statistics, Exploratory Factor Analysis and Structural Equation Modeling. The most important results are: in the sample, GSCM practices to the recovery of investment, as the resale of scrap and other waste materials, and the adequacy with legislation and auditing, obtained high scores; and research hypothesis (H1) was confirmed and considered statistically valid, indicating that, in fact, the evolution of environmental management influences the adoption of GSCM practices.

Decentralization and corruption: evidence from primary health-care programmes

The aim of this article is to evaluate whether there is an association between decentralization and corruption. In order to do so we analyse Brazilian health-care programmes that are run locally. To construct objective measures of corruption, we use the information from the reports of the auditing programme of the local governments of Brazil. Results point that there is no relationship between decentralization and corruption, whatever the measure of decentralization used.

Discretionary-based disclosure: evidence from the Brazilian market

The primary objective of this paper is to identify the factors that explain Brazilian companies level of voluntary disclosure. Underpinning this work is the Discretionary-based Disclosure theory. The sample is composed of the top 100 largest non-financial companies listed in the Bolsa de Valores de São Paulo (Brazilian Securities, Commodities, and Futures exchange - BOVESPA). Information was gathered from Financial Statements for the years ending in 2006, 2007, and 2008, with the use of content analysis. A disclosure framework based on 27 studies from these years was created, with a total of 92 voluntary items divided into two dimensions: economic (43) and socio-environmental (49). Based on the existing literature, a total of 12 hypotheses were elaborated and tested using a panel data approach. Results evidence that: (a) Sector and Origin of Control are statistically significant in all three models tested: economic, socio-environmental, and total; (b) Profitability is relevant in the economic model and in the total model; (c) Tobin s Q is relevant in the socio-environmental model and in the total disclosure model; (d) Leverage and Auditing Firm are only relevant in the economic disclosure model; (e) Size, Governance, Stock Issuing, Growth Opportunities and Concentration of Control are not statistically significant in any of the three models.

A critical appraisal of the legal framework governing the approval in microfinance Establishments within CEMAC

During the mid 80 19s and the early 90 19s the Banking sector of the CEMAC sub-region experienced crisis. This could be seen from the numerous liquidation of Banks within the sub-region during this period, microfinance establishments found a place as an alternative financial institution involved in the provision of savings and loans to the masses. The exercise of the activities of microfinance necessitates an application for approval form the monetary authority. Their potential managers and auditors must equally apply and obtain a license before functioning. After this approval has been obtained the microfinance establishment must register with the National Credit Council and the Trade and Personal Property Credit Register. // Durant les années 80 et au début des années 90 le secteur Bancaire de la sous-région CEMAC on vécue une crise, ceci pouvait ce voit par de nombreuse liquidation des Banques au sein de la sous-région pendant cette période. Les Etablissement de Micro finance ont trouve une place comme une institution financière alternative s’impliquant dans la fourniture de l’épargne et des prêts pour la masses. Mais l'exercice de l'activité de microfinance exige une demande d'agrément remise par l'autorité monétaire après confirmation de la commission bancaire. Mais avant que cet agrément soit remis, ils doivent fournir certain documents et informations. Les microfinances sont également oblige de fournir certaines documents et information s'il veut offrir un agence dans un du état membre de la CEMAC. Quand cette agrément est remise il sont les obligations administrative et professionnelle a remplir. Ceci consiste de s’inscrire auprès du Conseil National du Crédit et le Registre du Commerce et du Crédit Mobilier, adhérer a une Association Professionnelle, mais ils sont le choix adhérer à un réseau ou de poursuivre les activités indépendamment. L'autorité monétaire peut unilatéralement retrait la décision d'agrément pour un raison ou l'autre. Cependant, la décision de retrait de l'agrément est assujettir à un appel devant le conseil d'administration de la BEAC. La commission bancaire a prévu un ensemble de sanctions pour s'assurer que une personne ou établissement en défaut soit appelle en ordre. // Cameroon, Micro-finance, CEMAC, COBAC, Legislation

The Impact of the Sarbanes-Oxley Act on the Cost of Going Public

This paper examines the impact of the Sarbanes-Oxley Act (SOX), a legal framework intended to increase transparency and accountability of listed companies, on the cost of going public in the US. We expect SOX to increase the direct cost of going public, but decrease the underpricing because of reduced asymmetric information. Our main results corroborate these hypotheses. First, we find an increase in the cost of going public of 90 bp of gross proceeds. Second, we record a reduction in underpricing of 6 pp, which is related to a reduced offer price adjustment. This supports our hypothesis that SOX represents a mechanism to reduce asymmetric information.

Implementation of an Anthropomorphic Phantom for the Evaluation of Proton Therapy Treatment Procedures

With an increasing number of institutions offering proton therapy, the number of multi-institutional clinical trials involving proton therapy will also increase in the coming years. The Radiological Physics Center monitors sites involved in clinical trials through the use of site visits and remote auditing with thermoluminescent dosimeters (TLD) and mailable anthropomorphic phantoms. Currently, there are no heterogeneous phantoms that have been commissioned to evaluate proton therapy. It was hypothesized that an anthropomorphic pelvis phantom can be designed to audit treatment procedures (patient simulation, treatment planning and treatment delivery) at proton facilities to confirm agreement between the measured dose and calculated dose within 5%/3mm with a reproducibility of 3%. A pelvis phantom originally designed for use with photon treatments was retrofitted for use in proton therapy. The relative stopping power (SP) of each phantom material was measured. Hounsfield Units (HU) for each phantom material were measured with a CT scanner and compared to the relative stopping power calibration curve. The tissue equivalency for each material was calculated. Two proton treatment plans were created; one which did not correct for material SP differences (Plan 1) and one plan which did correct for SP differences (Plan 2). Film and TLD were loaded into the phantom and the phantom was irradiated 3 times per plan. The measured values were compared to the HU-SP calibration curve and it was found that the stopping powers for the materials could be underestimated by 5-10%. Plan 1 passed the criteria for the TLD and film margins with reproducibility under 3% between the 3 trials. Plan 2 failed because the right-left film dose profile average displacement was -9.0 mm on the left side and 6.0 mm on the right side. Plan 2 was intended to improve the agreements and instead introduced large displacements along the path of the beam. Plan 2 more closely represented the actual phantom composition with corrected stopping powers and should have shown an agreement between the measured and calculated dose within 5%/3mm. The hypothesis was rejected and the pelvis phantom was found to be not suitable to evaluate proton therapy treatment procedures.

Scaling the Costs of 404 Testing to Fit the Needs of Small Public Companies

In July of 2002, the Sarbanes-Oxley Act was passed by Congress, including section 404 which requires the auditors to test and opine on the company's internal controls. Since that time there has been much debate about whether the intended benefits of increased investor confidence and financial statement transparency trump the unexpectedly high compliance costs, especially for public companies with market-caps less than $75 million. Before these companies begin complying in the upcoming year, interest groups are calling for the requirements to be 'scaled' to better fit the needs of these companies. While auditors already are expected to scale their audit approach to each individual client, more must be done to significantly decrease the costs in order to reverse the trend of small companies foregoing listing on U.S. capital markets. Increased guidance from the PCAOB, SEC, and other related parties could help the small-cap companies and their auditors be aware of best practices. Also, exempting industries that already follow similar guidelines or are significantly injured by the compliance requirements could help. Lastly, the controversial proposal of rotational audits could be put in place if the affected parties cooperate to remove the undue burden on these small-cap companies. Without some form of significant action, the investors could soon lose the ability to buy small-cap companies in U.S. markets.