Epävarmuuden haltuunotosta Venäjälle suuntautuvissa hankkeissa - tapaustutkimus

Tämä tutkimus tarkastelee epävarmuutta Venäjälle suuntautuvissa hankkeissa. Tutkimuksessa analysoidaan Venäjän liiketoimintaympäristöön liittyvää epävarmuutta. Tutkimusongelman muodostaa näiden epävarmuuksien haltuunotto Venäjälle suuntautuvissa investoinneissa. Tutkimuksen teoreettisena viitekehyksenä käytetään 1970-luvulta lähtien kehitettyä reaalioptiolähestymistapaa. Tutkimusmenetelmänä käytetään tapaustutkimusta, jossa esimerkkiyritysten tekemiä valintoja pohditaan reaalioptioviitekehyksen lävitse. Tutkimuksen empiirisessä osassa on haastateltu esimerkkiyritysten edustajia sekämuita venäjänkaupan ammattilaisia ja tiedusteltu heidän näkemyksiään markkinoiden kehityksestä ja erityispiirteistä. Reaalioptiolähestymistapaa käytetään apuvälineenä hankkeisiin sisältyvää epävarmuutta jäsenneltäessä ja päätöksentekijöiden kommunikaatiovälineenä päätöstilanteissa. Sen sijaan Venäjälle suuntautuvien hankkeiden (reaalioptioiden) matemaattinen arvottaminen on hankalaa liiketoimintaympäristön ominaispiirteiden vuoksi.

Developing Support for Scenario Process: A Scenario Study on Lappeenranta University of Technology from 2006 to 2016

Epävarmuus ei ole outoa enää julkishallinon alueellakaan. Globalisaation,tietotalous ja muut yksityissektoria ravistelleet ilmiöt ovat lisänneet mielenkiintoa erilaisiin tekniikoihin joilla voidaan lievittää epävarmuudesta aiheutuvia ongelmia. Tämä raportti kuvailee skenaariosuunnittelun käyttöä eräänä mahdollisuutena epävarmuuden hallintaan julkishallinnossa ja yksityissektorilla. Raportti sijoittuu samaan skenaariotutkimuksen jatkumoon edellisten LTY:ssä toteutettujen skenaariotutkimusten kanssa. tutkimus valottaa tutkimuksen ja käytännön työn nykytilaa helposti hyödynnettävässä muodossa. Rapostin kontribuutio on kuvata tutkimukseen perustuva tuettu skenaarioprosessi ja syntyneet skenaariot, keskittyen prosessin tukemiseen eri menetelmin.

International bioenergy trade- scenario study on international biomass market in 2020

The markets of biomass for energy are developing rapidly and becoming more international. A remarkable increase in the use of biomass for energy needs parallel and positive development in several areas, and there will be plenty of challenges to overcome. The main objective of the study was to clarify the alternative future scenarios for the international biomass market until the year 2020, and based on the scenario process, to identify underlying steps needed towards the vital working and sustainable biomass market for energy purposes. Two scenario processes were conducted for this study. The first was carried out with a group of Finnish experts and thesecond involved an international group. A heuristic, semi-structured approach, including the use of preliminary questionnaires as well as manual and computerised group support systems (GSS), was applied in the scenario processes.The scenario processes reinforced the picture of the future of international biomass and bioenergy markets as a complex and multi-layer subject. The scenarios estimated that the biomass market will develop and grow rapidly as well as diversify in the future. The results of the scenario process also opened up new discussion and provided new information and collective views of experts for the purposes of policy makers. An overall view resulting from this scenario analysis are the enormous opportunities relating to the utilisation of biomass as a resource for global energy use in the coming decades. The scenario analysis shows the key issues in the field: global economic growth including the growing need for energy, environmental forces in the global evolution, possibilities of technological development to solve global problems, capabilities of the international community to find solutions for global issues and the complex interdependencies of all these driving forces. The results of the scenario processes provide a starting point for further research analysing the technological and commercial aspects related the scenarios and foreseeing the scales and directions of biomass streams.

R&D Performance Analysis: Case Studies on the Challenges and Promotion of the Evaluation and Measurement of R&D

Due to the intense international competition, demanding, and sophisticated customers, and diverse transforming technological change, organizations need to renew their products and services by allocating resources on research and development (R&D). Managing R&D is complex, but vital for many organizations to survive in the dynamic, turbulent environment. Thus, the increased interest among decision-makers towards finding the right performance measures for R&D is understandable. The measures or evaluation methods of R&D performance can be utilized for multiple purposes; for strategic control, for justifying the existence of R&D, for providing information and improving activities, as well as for the purposes of motivating and benchmarking. The earlier research in the field of R&D performance analysis has generally focused on either the activities and considerable factors and dimensions - e.g. strategic perspectives, purposes of measurement, levels of analysis, types of R&D or phases of R&D process - prior to the selection of R&Dperformance measures, or on proposed principles or actual implementation of theselection or design processes of R&D performance measures or measurement systems. This study aims at integrating the consideration of essential factors anddimensions of R&D performance analysis to developed selection processes of R&D measures, which have been applied in real-world organizations. The earlier models for corporate performance measurement that can be found in the literature, are to some extent adaptable also to the development of measurement systemsand selecting the measures in R&D activities. However, it is necessary to emphasize the special aspects related to the measurement of R&D performance in a way that make the development of new approaches for especially R&D performance measure selection necessary: First, the special characteristics of R&D - such as the long time lag between the inputs and outcomes, as well as the overall complexity and difficult coordination of activities - influence the R&D performance analysis problems, such as the need for more systematic, objective, balanced and multi-dimensional approaches for R&D measure selection, as well as the incompatibility of R&D measurement systems to other corporate measurement systems and vice versa. Secondly, the above-mentioned characteristics and challenges bring forth the significance of the influencing factors and dimensions that need to be recognized in order to derive the selection criteria for measures and choose the right R&D metrics, which is the most crucial step in the measurement system development process. The main purpose of this study is to support the management and control of the research and development activities of organizations by increasing the understanding of R&D performance analysis, clarifying the main factors related to the selection of R&D measures and by providing novel types of approaches and methods for systematizing the whole strategy- and business-based selection and development process of R&D indicators.The final aim of the research is to support the management in their decision making of R&D with suitable, systematically chosen measures or evaluation methods of R&D performance. Thus, the emphasis in most sub-areas of the present research has been on the promotion of the selection and development process of R&D indicators with the help of the different tools and decision support systems, i.e. the research has normative features through providing guidelines by novel types of approaches. The gathering of data and conducting case studies in metal and electronic industry companies, in the information and communications technology (ICT) sector, and in non-profit organizations helped us to formulate a comprehensive picture of the main challenges of R&D performance analysis in different organizations, which is essential, as recognition of the most importantproblem areas is a very crucial element in the constructive research approach utilized in this study. Multiple practical benefits regarding the defined problemareas could be found in the various constructed approaches presented in this dissertation: 1) the selection of R&D measures became more systematic when compared to the empirical analysis, as it was common that there were no systematic approaches utilized in the studied organizations earlier; 2) the evaluation methods or measures of R&D chosen with the help of the developed approaches can be more directly utilized in the decision-making, because of the thorough consideration of the purpose of measurement, as well as other dimensions of measurement; 3) more balance to the set of R&D measures was desired and gained throughthe holistic approaches to the selection processes; and 4) more objectivity wasgained through organizing the selection processes, as the earlier systems were considered subjective in many organizations. Scientifically, this dissertation aims to make a contribution to the present body of knowledge of R&D performance analysis by facilitating dealing with the versatility and challenges of R&D performance analysis, as well as the factors and dimensions influencing the selection of R&D performance measures, and by integrating these aspects to the developed novel types of approaches, methods and tools in the selection processes of R&D measures, applied in real-world organizations. In the whole research, facilitation of dealing with the versatility and challenges in R&D performance analysis, as well as the factors and dimensions influencing the R&D performance measure selection are strongly integrated with the constructed approaches. Thus, the research meets the above-mentioned purposes and objectives of the dissertation from the scientific as well as from the practical point of view.

Applying the principles of life cycle assessment and costing in process modeling to examine profit-making capability

Static process simulation has traditionally been used to model complex processes for various purposes. However, the use of static processsimulators for the preparation of holistic examinations aiming at improving profit-making capability requires a lot of work because the production of results requires the assessment of the applicability of detailed data which may be irrelevant to the objective. The relevant data for the total assessment gets buried byirrelevant data. Furthermore, the models do not include an examination of the maintenance or risk management, and economic examination is often an extra property added to them which can be performed with a spreadsheet program. A process model applicable to holistic economic examinations has been developed in this work. The model is based on the life cycle profit philosophy developed by Hagberg and Henriksson in 1996. The construction of the model has utilized life cycle assessment and life cycle costing methodologies with a view to developing, above all, a model which would be applicable to the economic examinations of complete wholes and which would require the need for information focusing on aspects essential to the objectives. Life cycle assessment and costing differ from each other in terms of the modeling principles, but the features of bothmethodologies can be used in the development of economic process modeling. Methods applicable to the modeling of complex processes can be examined from the viewpoint of life cycle methodologies, because they involve the collection and management of large corpuses of information and the production of information for the needs of decision-makers as well. The results of the study shows that on the basis of the principles of life cycle modeling, a process model can be created which may be used to produce holistic efficiency examinations on the profit-making capability of the production line, with fewer resources thanwith traditional methods. The calculations of the model are based to the maximum extent on the information system of the factory, which means that the accuracyof the results can be improved by developing information systems so that they can provide the best information for this kind of examinations.

Solution scanning as a key policy tool: identifying management interventions to help maintain and enhance regulating ecosystem services

The major task of policy makers and practitioners when confronted with a resource management problem is to decide on the potential solution(s) to adopt from a range of available options. However, this process is unlikely to be successful and cost effective without access to an independently verified and comprehensive available list of options. There is currently burgeoning interest in ecosystem services and quantitative assessments of their importance and value. Recognition of the value of ecosystem services to human well-being represents an increasingly important argument for protecting and restoring the natural environment, alongside the moral and ethical justifications for conservation. As well as understanding the benefits of ecosystem services, it is also important to synthesize the practical interventions that are capable of maintaining and/or enhancing these services. Apart from pest regulation, pollination, and global climate regulation, this type of exercise has attracted relatively little attention. Through a systematic consultation exercise, we identify a candidate list of 296 possible interventions across the main regulating services of air quality regulation, climate regulation, water flow regulation, erosion regulation, water purification and waste treatment, disease regulation, pest regulation, pollination and natural hazard regulation. The range of interventions differs greatly between habitats and services depending upon the ease of manipulation and the level of research intensity. Some interventions have the potential to deliver benefits across a range of regulating services, especially those that reduce soil loss and maintain forest cover. Synthesis and applications: Solution scanning is important for questioning existing knowledge and identifying the range of options available to researchers and practitioners, as well as serving as the necessary basis for assessing cost effectiveness and guiding implementation strategies. We recommend that it become a routine part of decision making in all environmental policy areas.

Cost-effectiveness of early detection of breast cancer in Catalonia (Spain)

Background: Breast cancer (BC) causes more deaths than any other cancer among women in Catalonia. Early detection has contributed to the observed decline in BC mortality. However, there is debate on the optimal screening strategy. We performed an economic evaluation of 20 screening strategies taking into account the cost over time of screening and subsequent medical costs, including diagnostic confirmation, initial treatment, follow-up and advanced care. Methods: We used a probabilistic model to estimate the effect and costs over time of each scenario. The effect was measured as years of life (YL), quality-adjusted life years (QALY), and lives extended (LE). Costs of screening and treatment were obtained from the Early Detection Program and hospital databases of the IMAS-Hospital del Mar in Barcelona. The incremental cost-effectiveness ratio (ICER) was used to compare the relative costs and outcomes of different scenarios. Results: Strategies that start at ages 40 or 45 and end at 69 predominate when the effect is measured as YL or QALYs. Biennial strategies 50-69, 45-69 or annual 45-69, 40-69 and 40-74 were selected as cost-effective for both effect measures (YL or QALYs). The ICER increases considerably when moving from biennial to annual scenarios. Moving from no screening to biennial 50-69 years represented an ICER of 4,469€ per QALY. Conclusions: A reduced number of screening strategies have been selected for consideration by researchers, decision makers and policy planners. Mathematical models are useful to assess the impact and costs of BC screening in a specific geographical area.

Are Evaluation of ICTs Investment Using Decision Support Systems:Case Applications from Distributor's and End User's Perspective Group Decision

The evaluation of investments in advanced technology is one of the most important decision making tasks. The importance is even more pronounced considering the huge budget concerning the strategic, economic and analytic justification in order to shorten design and development time. Choosing the most appropriate technology requires an accurate and reliable system that can lead the decision makers to obtain such a complicated task. Currently, several Information and Communication Technologies (ICTs) manufacturers that design global products are seeking local firms to act as their sales and services representatives (called distributors) to the end user. At the same time, the end user or customer is also searching for the best possible deal for their investment in ICT's projects. Therefore, the objective of this research is to present a holistic decision support system to assist the decision maker in Small and Medium Enterprises (SMEs) - working either as individual decision makers or in a group - in the evaluation of the investment to become an ICT's distributor or an ICT's end user. The model is composed of the Delphi/MAH (Maximising Agreement Heuristic) Analysis, a well-known quantitative method in Group Support System (GSS), which is applied to gather the average ranking data from amongst Decision Makers (DMs). After that the Analytic Network Process (ANP) analysis is brought in to analyse holistically: it performs quantitative and qualitative analysis simultaneously. The illustrative data are obtained from industrial entrepreneurs by using the Group Support System (GSS) laboratory facilities at Lappeenranta University of Technology, Finland and in Thailand. The result of the research, which is currently implemented in Thailand, can provide benefits to the industry in the evaluation of becoming an ICT's distributor or an ICT's end user, particularly in the assessment of the Enterprise Resource Planning (ERP) programme. After the model is put to test with an in-depth collaboration with industrial entrepreneurs in Finland and Thailand, the sensitivity analysis is also performed to validate the robustness of the model. The contribution of this research is in developing a new approach and the Delphi/MAH software to obtain an analysis of the value of becoming an ERP distributor or end user that is flexible and applicable to entrepreneurs, who are looking for the most appropriate investment to become an ERP distributor or end user. The main advantage of this research over others is that the model can deliver the value of becoming an ERP distributor or end user in a single number which makes it easier for DMs to choose the most appropriate ERP vendor. The associated advantage is that the model can include qualitative data as well as quantitative data, as the results from using quantitative data alone can be misleading and inadequate. There is a need to utilise quantitative and qualitative analysis together, as can be seen from the case studies.

Assessing chronic disease management in European health systems : concepts and approaches

This book comprises two volumes and builds on the findings of the DISMEVAL project (Developing and validating DISease Management EVALuation methods for European health care systems), funded under the European Union's (EU) Seventh Framework Programme (FP7) (Agreement no. 223277). DISMEVAL was a three-year European collaborative project conducted between 2009 and 2011. It contributed to developing new research methods and generating the evidence base to inform decision-making in the field of chronic disease management evaluation (www.dismeval.eu). In this book, we report on the findings of the project's first phase, capturing the diverse range of contexts in which new approaches to chronic care are being implemented and evaluating the outcomes of these initiatives using an explicit comparative approach and a unified assessment framework. In this first volume, we describe the range of approaches to chronic care adopted in 12 European countries. By reflecting on the facilitators and barriers to implementation, we aim to provide policy-makers and practitioners with a portfolio of options to advance chronic care approaches in a given policy context.

The development of an information infrastructure for cost estimating in the automotive industry

Työn tavoitteena on luoda yleinen informaatioinfrastruktuuri autoteollisuuden valmistuskustannusten arviointiin. Nykyään tämä kustannusarviointi on laajassa käytössä oleva menetelmä. Se mahdollistaa tuotekustannusten hallitsemisen, mikä lisää autovalmistajien kilpailukykyä. Kustannusarvioinnissa tarvitaan laadukasta tietoa, mutta suoritetussa tutkimuksessa paljastui, että useat seikat haittaavat tätä arviointia. Erityisesti resurssien vähyys, tiedonhankinta ja tiedon luotettavuuden varmentaminen aiheuttavat ongelmia. Nämä seikat ovat johtaneet kokemusperäisen asiantuntemuksen laajaan käyttöön, minkä johdosta erityisesti kokemattomilla kustannusarvioijilla on vaikeuksia ymmärtää kustannusarvioiden tietovaatimuksia. Tämän johdosta tutkimus tuo esiin kokeneiden kustannusarvioijien käyttämiä tietoja ja tietolähteitä päämääränä lisätä kustannusarvioiden ymmärtämistä. Informaatioinfrastruktuuri, joka sisältää tarvittavan tiedon järkevien ja luotettavien kustannusarvioiden luontiin, perustuu tutkimuksen tuloksiin. Infrastruktuuri määrittelee tarvittavan kustannustiedon ja niiden mahdolliset tietolähteet. Lisäksi se selvittää miksi tieto on tarpeellista ja miten tiedon oikeellisuus pitäisi varmentaa. Infrastruktuuria käytetään yhdessä yleisen kustannusarvioprosessimallin kanssa. Tämä integrointi johtaa tarkempiin ja selkeämpiin kustannusarvioihin autoteollisuudessa.

Longitudinal study of informed consent in innovative therapy research: experience and provisional recommendations from a multicenter trial of intracerebral grafting.

BACKGROUND: There is an urgent need to assess and improve the consent process in clinical trials of innovative therapies for neurodegenerative disorders. METHODS: We performed a longitudinal study of the consent of Huntington's disease patients during the Multicenter Fetal Cell Intracerebral Grafting Trial in Huntington's Disease (MIG-HD) in France and Belgium. Patients and their proxies completed a consent questionnaire at inclusion, before signing the consent form and after one year of follow-up, before randomization and transplantation. The questionnaire explored understanding of the protocol, satisfaction with the information delivered, reasons for participating in the trial and expectations regarding the transplant. Forty-six Huntington's disease patients and 27 proxies completed the questionnaire at inclusion, and 27 Huntington's disease patients and 16 proxies one year later. RESULTS: The comprehension score was high and similar for Huntington's disease patients and proxies at inclusion (72.6% vs 77.8%; P > 0.1) but only decreased in HD patients after one year. The information satisfaction score was high (73.5% vs 66.5%; P > 0.1) and correlated with understanding in both patients and proxies. The motivation and expectation profiles were similar in patients and proxies and remained unchanged after one year. CONCLUSIONS: Cognitively impaired patients with Huntington's disease were capable of consenting to participation in this trial. This consent procedure has presumably strengthened their understanding and should be proposed before signing the consent form in future gene or cell therapy trials for neurodegenerative disorders. Because of the potential cognitive decline, proxies should be designated as provisional surrogate decision-makers, even in competent patients.

Data Envelopment Analysis and non-discretionary inputs : How to select the most suitable model using multi-criteria decision analysis

Within Data Envelopment Analysis, several alternative models allow for an environmental adjustment. The majority of them deliver divergent results. Decision makers face the difficult task of selecting the most suitable model. This study is performed to overcome this difficulty. By doing so, it fills a research gap. First, a two-step web-based survey is conducted. It aims (1) to identify the selection criteria, (2) to prioritize and weight the selection criteria with respect to the goal of selecting the most suitable model and (3) to collect the preferences about which model is preferable to fulfil each selection criterion. Second, Analytic Hierarchy Process is used to quantify the preferences expressed in the survey. Results show that the understandability, the applicability and the acceptability of the alternative models are valid selection criteria. The selection of the most suitable model depends on the preferences of the decision makers with regards to these criteria.

Asset freezing, corporate political resources and the Tullock paradox

In 1967, Gordon Tullock asked why firms do not spend more on campaign contributions, despite the large rents that could be generated from political activities. We suggest in this paper that part of the puzzle could come from the fact that one important type of political activity has been neglected by the literature which focuses on campaign contributions or political connections. We call this neglected activity "asset freezing": situations in which firms delay lay-offs or invest in specific technologies to support local politicians' re-election objectives. In doing so, firms bear a potentially significant cost as they do not use a portion of their economic assets in the most efficient or productive way. The purpose of this paper is to provide a first theoretical exploration of this phenomenon. Building on the literature on corporate political resources, we argue that a firm's economic assets can be evaluated based on their degree of "political freezability," which depends on the flexibility of their use and on their value for policy-makers. We then develop a simple model in which financial contributions and freezing assets are alternative options for a firm willing to lawfully influence public policy-making, and derive some of our initial hypotheses more formally.

Konenäköjärjestelmien ostokriteerit ja laitetoimittajien asiakashankinta

Työn tavoitteena oli edesauttaa Euroelektro International Oy:tä kasvattamaan asiakaskuntaansa löytämällä oikeat lähtökohdat yrityksen markkinoinnin ja myynnin tehostamiselle sekä kannattavien kohdesegmenttien valinnalle. Työssä tehtiin tutkimus, jolla määritettiin yrityksen tyypillinen asiakas, asiakastarpeet, konenäköjärjestelmien ostokriteerit ja –preferenssit sekä ostopäätöksen tekijät ja siihen vaikuttavat henkilöt. Lisäksi selvitettiin, mitkä ovat Euroelektron potentiaalisia ja ei-potentiaalisia teollisuuden aloja. Tutkimuksen tulosten perusteella laadittiin lopuksi yrityksen markkinoinnin ja myynnin kehittämisehdotelma. Tutkimus rajattiin konenäköä jo käyttäviin yrityksiin, konenäön käyttöä suunnitteleviin yrityksiin, yrityksiin, joiden ajateltiin voivan tulevaisuudessa käyttää konenäköä ja yrityksiin, jotka ovat tekemisissä konenäköasiakkaiden kanssa. Markkinointi- ja myyntiprosessien hallintaan yrityksen tulisi kehittää oma seurantaohjelma, jonka avulla valitun markkinointistrategian onnistuneisuutta voitaisiin helposti seurata, sekä laatukäsikirja, mistä löytyisivät standardoidut toimenpidemallit asiakashankintaan, kenttämyyntiin ja myyntiprojektien läpiviemiseen sekä eri toimihenkilöiden toimenkuvaukset ja vastuualueet.

ICT-alan yrittäjyyden alueellinen edistäminen CASE: Etelä-Karjala

Tutkimuksen tarkoituksena oli selvittää syy siihen, miksi Etelä-Karjalassa syntyy vähemmän uusia ICT-alan yrityksiä, kuin mihin on edellytyksiä. Tutkimusmetodologia oli toiminta-analyyttinen ja sen empiirinen osuus muodostettiin avoimien teemahaastatteluiden avulla. Haastatellut olivat alueen ICTalan päättäjiä ja heitä oli yhteensä 28. Merkittävimpinä syinä siihen, että korkeakoulun, ammattikorkeakoulun ja teknologiakeskuksen olemassaolosta huolimatta maakuntaan syntyy varsin vähän uusia ICT-alan yrityksiä, nähtiin olevan negatiivinen ilmapiiri ja kateus yrittäjyyttä kohtaan, lähimarkkinoiden pieni koko sekä maakunnallisen yhteistyön puuttuminen ICT-alalla. Kehittämisalueina nousivat esiin koulutus, alueellinen yhteistyö, yritysyhteistyö, infrastruktuurin kehittäminen, tutkimus- ja tuotekehitys sekä alueen markkinointi. Ohjeeksi ICT-alan yrittäjyyden edistämiseksi Etelä-Karjalassa tutkimuksessa annettiin laajan yhteisen tahdon aikaansaaminen ja resurssien kohdentaminen jollekin valitulle ICT-alan osa-alueelle tavoitteena synnyttää alueelle kansainvälisesti merkittävä osaamiskeskittymä.