Chagas disease in an area of recent occupation in Cochabamba, Bolivia

INTRODUCTION: A descriptive, entomological and seroepidemiological study on Chagas disease was conducted in a place of recent occupation on the outskirts of Cochabamba, Bolivia: Avaroa/Primer de Mayo (population:3,000), where the socio-economic level is low and no control measures have been made available. METHODS: The immunofluorescent antibody test (IFAT) was used for IgG and IgM anti-Trypanosoma cruzi antibodies in filter paper bloodspot eluates from 128 subjects (73 females, 55 males) selected by systematic sampling. Concerning each subject age, gender, birthplace, occupation, duration of residence and building materials used in their houses were recorded. Vectors were captured both in domestic and peridomestic environments. RESULTS: Seropositive, 12.5% (16/128): females, 15.1% (11/73); males, 9.1% (5/55). Average time of residence: 6.1 years for the whole population sample and 7.4 years for the seropositive subjects. Most houses had adobe walls (76.7% , n= 30), galvanized iron rooves (86.7%) and earthen floors (53.4%) 80% of the walls had crevices. One hundred forty seven specimens of Triatoma infestans were captured, of which 104 (70.7%) were domestic, and 1 peridomestic Triatoma sordida. Precipitin host identification: birds, 67.5%; humans, 27.8%; rodents, 11.9%; dogs, 8.7%; cats, 1.6%. House infestation and density indices were 53.3 and 493.0 respectively. We found 21 (14.3%) specimens of T. infestans infected with trypanosomes, 18 (85.7%) of which in domestic environments. DISCUSSION: The elements for the vector transmission of Chagas disease are present in Avaroa/Primer de Mayo and the ancient custom of keeping guinea pigs indoors adds to the risk of human infection. In neighboring Cochabamba, due to substandard quality control, contaminated blood transfusions are not infrequent, which further aggravates the spread of Chagas disease. Prompt action to check the transmission of this infection, involving additionally the congenital and transfusional modes of acquisition, is required.

Mortalidade por câncer na região urbano-industrial da Baixada Santista, SP (Brasil)

INTRODUÇÃO: Visando a estudar a relação entre câncer e industrialização analisou-se a evolução da mortalidade por câncer da região na Baixada Santista, SP (Brasil), importante complexo industrial-portuário cujos municípios se agrupam em duas diferentes áreas quanto ao processo de industrialização. MÉTODOS: Selecionaram-se 8.546 óbitos por câncer (CID-9), de indivíduos do sexo masculino acima de dez anos de idade, residentes nos municípios da Baixada Santista, no período de 1980 a 1993. Calcularam-se as taxas de mortalidade padronizada pela população mundial e as respectivas razões entre as taxas para a região e seus estratos: Estrato I (complexo industrial-portuário - Santos, São Vicente, Cubatão e Guarujá), e Estrato II (não industrializado - Praia Grande, Mongaguá, Itanhaém e Peruíbe). RESULTADOS: A taxa anual média de mortalidade da Baixada Santista mostrou ­ se alta (197,9/100.000). Houve diferença estatisticamente significante entre as taxas de mortalidade observadas para os Estratos I e II, respectivamente 209,2 e 146,7/100.000, com razão de 1,42 (IC 1,36 - 1,51). CONCLUSÕES: Supõe-se que a exposição ocupacional e ambiental a agentes químicos carcinogênicos relacionados ao processo produtivo do complexo industrial, vários deles já identificados, sejam fatores importantes na determinação da mortalidade por câncer. Nesse sentido outros estudos epidemiológicos são necessários para melhor caracterizar o excesso de mortalidade na área industrial da região estudada.

Food frequency consumption and lipoproteins serum levels in the population of an urban area, Brazil

OBJECTIVE: To identify the association between food group consumption frequency and serum lipoprotein levels among adults. METHODS: The observations were made during a cross-sectional survey of a representative sample of men and women over 20 years old living in Cotia county, S. Paulo, Brazil. Data on food frequency consumption, serum lipids, and other covariates were available for 1,045 adults. Multivariate analyses adjusted by age, gender, body mass index, waist-to-hip ratio, educational level, family income, physical activity, smoking, and alcohol consumption were performed. RESULTS: Consumption of processed meat, chicken, red meat, eggs and dairy foods were each positively and significantly correlated with LDL-C, whereas the intake of vegetables and fruits showed an inverse correlation. Daily consumption of processed meat, chicken, red meat, eggs, and dairy foods were associated with 16.6 mg/dl, 14.5 mg/dl, 11.1 mg/dl, 5.8 mg/dl, and 4.6 mg/dl increase in blood LDL-C, respectively. Increases of daily consumption of fruit and vegetables were associated with 5.2 mg/dl and 5.5 mg/dl decreases in LDL-C, respectively. Alcohol beverage consumption showed a significant positive correlation with HDL-C. CONCLUSIONS: Dietary habits in the study population seem to contribute substantially to the variation in blood LDL and HDL concentrations. Substantially CHD risk reduction could be achieved with dietary changes.

Kdd, semma crisp-dm: a parallel overviee

In the last years there has been a huge growth and consolidation of the Data Mining field. Some efforts are being done that seek the establishment of standards in the area. Included on these efforts there can be enumerated SEMMA and CRISP-DM. Both grow as industrial standards and define a set of sequential steps that pretends to guide the implementation of data mining applications. The question of the existence of substantial differences between them and the traditional KDD process arose. In this paper, is pretended to establish a parallel between these and the KDD process as well as an understanding of the similarities between them.

KDD, SEMMA and CRISP-DM: a parallel overview

In the last years there has been a huge growth and consolidation of the Data Mining field. Some efforts are being done that seek the establishment of standards in the area. Included on these efforts there can be enumerated SEMMA and CRISP-DM. Both grow as industrial standards and define a set of sequential steps that pretends to guide the implementation of data mining applications. The question of the existence of substantial differences between them and the traditional KDD process arose. In this paper, is pretended to establish a parallel between these and the KDD process as well as an understanding of the similarities between them.

Efeito do tolueno e ruído na génese de perda auditiva ocupacional: projecto de investigação

Mestrado em Higiene e Segurança no Trabalho

Cr2O3 thin films grown at room temperature by low pressure laser chemical vapour deposition

Chromia (Cr2O3) has been extensively explored for the purpose of developing widespread industrial applications, owing to the convergence of a variety of mechanical, physical and chemical properties in one single oxide material. Various methods have been used for large area synthesis of Cr2O3 films. However, for selective area growth and growth on thermally sensitive materials, laser-assisted chemical vapour deposition (LCVD) can be applied advantageously. Here we report on the growth of single layers of pure Cr2O3 onto sapphire substrates at room temperature by low pressure photolytic LCVD, using UV laser radiation and Cr(CO)(6) as chromium precursor. The feasibility of the LCVD technique to access selective area deposition of chromia thin films is demonstrated. Best results were obtained for a laser fluence of 120 mJ cm(-2) and a partial pressure ratio of O-2 to Cr(CO)(6) of 1.0. Samples grown with these experimental parameters are polycrystalline and their microstructure is characterised by a high density of particles whose size follows a lognormal distribution. Deposition rates of 0.1 nm s(-1) and mean particle sizes of 1.85 mu m were measured for these films. (C) 2011 Elsevier B.V. All rights reserved.

Reproductive outcomes in an area adjacent to a petrochemical plant in southern Brazil

OBJECTIVE: To evaluate possible adverse reproductive outcomes in an area adjacent to a petrochemical plant in southern Brazil. METHODS: A review of 17,113 birth records of the main hospital of the municipality of Montenegro, southern Brazil, from 1983 to 1998 was carried out. Three groups of cases were selected: (1) newborns with major congenital malformations; (2) newborns with low birth weight (<2,500 g); and (3) stillborns (>500 g). A control was assigned to each case. Controls were the first newborns weighing > or = 2,500 g without malformations and of case-matching sex. Mother's residence during pregnancy was used as an exposure parameter. Statistical analyses were performed using Chi-square test or Fisher test, odds ratio, 0.05 significance level, and 95% confidence interval. RESULTS: For unadjusted analysis, it was found a correlation between low birth weight and geographical proximity of mother's residence to the petrochemical plant (OR = 1.66; 95% CI = 1.01--2.72) or residence on the way of preferential wind direction (OR = 1.62; 95% CI = 1.03--2.56). When other covariates were added in the conditional logistic regression (maternal smoking habits, chronic disease and age), there was no association. CONCLUSIONS: Despite final results were negative, low birth weight could be a good parameter of environmental contamination and should be closely monitored in the studied area.

Comparison of deposited surface area of airborne ultrafine particles generated from two welding processes

This article describes work performed on the assessment of the levels of airborne ultrafine particles emitted in two welding processes metal-active gas (MAG) of carbon steel and friction-stir welding (FSW) of aluminium in terms of deposited area in alveolar tract of the lung using a nanoparticle surface area monitor analyser. The obtained results showed the dependence from process parameters on emitted ultrafine particles and clearly demonstrated the presence of ultrafine particles, when compared with background levels. The obtained results showed that the process that results on the lower levels of alveolar-deposited surface area is FSW, unlike MAG. Nevertheless, all the tested processes resulted in important doses of ultrafine particles that are to be deposited in the human lung of exposed workers.

Survival of adult AIDS patients in a reference hospital of a metropolitan area in Brazil

OBJECTIVE: To evaluate the influence of sociodemographic, clinical, and epidemiological factors in AIDS patients survival in a reference hospital. METHODS: A sample of 502 adult AIDS patients out of 1,494 AIDS cases registered in a hospital in Fortaleza, Brazil, was investigated between 1986 and 1998. Sixteen cases were excluded due to death at the moment of the AIDS diagnosis and 486 were analyzed in the study. Socioeconomic and clinical epidemiological were the variables studied. Statistical analysis was conducted using the Kaplan-Meier survival analysis and the Cox proportional hazards model. RESULTS: Three hundred and sixty two out of the 486 patients studied took at least one antiretroviral drug and their survival was ten times longer than those who did not take any drug (746 and 79 days, respectively, p <0.001). Patients who took two nucleoside reverse transcriptase inhibitors (NRTI) plus protease inhibitor were found to have higher survival rates (p <0.001). The risk of dying in the first year was significantly lower for patients who took NRTI and a protease inhibitor compared to those who took only NRTI. In addition, this risk was much lower from the second year on (0.10; 95%CI: 0.42-0.23). The risk of dying in the first year was significantly higher for less educated patients (15.58; 95%CI: 6.64-36.58) and those who had two or more systemic diseases (3.03; 95%CI: 1.74-5.25). After the first year post-diagnosis, there was no risk difference for these factors. CONCLUSIONS: Higher education revealed to exert a significant influence in the first-year survival. Antiretroviral drugs had a greater impact in the survival from the second year on. A more aggressive antiretroviral therapy started earlier could benefit those patients.

Activos fixos tangíveis numa empresa industrial do ramo automóvel transição para o SNC

Dissertação para a obtenção do grau de mestre em Contabilidade e Finanças Orientador: Mestre António Costa Reis

Concepção e implementação do time-driven activity based costing numa PME industrial: evidência de um estudo empírico

Dissertação para obtenção do Grau de Mestre em Contabilidade e Finanças Orientador: Mestre Paulino Manuel Leite da Silva

Fatores influenciadores da gestão da qualidade e independência do auditor: um estudo de caso

Dissertação apresentada ao Instituto Superior de Contabilidade para obtenção do Grau de Mestre em Auditoria Orientada por: Doutora Alcina Dias

Análise de investimento de um projeto imobiliário: armazém industrial

Análise de investimento da construção e comercialização de um armazém industrial, situado na zona Industrial de Sines, com dois pisos e 400 m2 de área de construção. Esta análise permite a tomada decisão de levar por diante a construção do imóvel, em que já se possui o terreno e a única incógnita são os custos de construção, dado que o preço de venda do imóvel acabado é estabelecido pelo mercado. Começou-se por fazer a avaliação do imóvel no estado acabado através de dois métodos de avaliação: o método comparativo ou de mercado e o método do rendimento. Para tal, utilizam-se amostras de imóveis semelhantes ao imóvel em avaliação à venda no mercado local. Na validação da amostra, utiliza-se o critério de Chauvenet. A decisão de investimento no imóvel tem por base uma abordagem estática de análise de investimento. Para tal, estimaram-se o valor do terreno e encargos, custos de construção e encargos, custos comerciais, PVT e a margem do promotor. Para um controlo rigoroso da execução do investimento numa fase posterior faz-se a avaliação do projeto de investimento, segundo uma abordagem dinâmica de análise de investimento, tendo por base o desconto de fluxos de caixa. Esta é complementada por uma análise de sensibilidade na ótica dos capitais próprios: aos custos de construção, ao tempo de construção, ao tempo de venda e ao PVT, face a um cenário base. Por último, é feito um acompanhamento continuado ao longo da obra entre os desvios dos custos de construção reais e os previstos na decisão de investimento inicial.

OC/EC ratio observations in Europe: Re-thinking the approach for apportionment between primary and secondary organic carbon

This study explores a large set of OC and EC measurements in PM(10) and PM(2.5) aerosol samples, undertaken with a long term constant analytical methodology, to evaluate the capability of the OC/EC minimum ratio to represent the ratio between the OC and EC aerosol components resulting from fossil fuel combustion (OC(ff)/EC(ff)). The data set covers a wide geographical area in Europe, but with a particular focus upon Portugal, Spain and the United Kingdom, and includes a great variety of sites: urban (background, kerbside and tunnel), industrial, rural and remote. The highest minimum ratios were found in samples from remote and rural sites. Urban background sites have shown spatially and temporally consistent minimum ratios, of around 1.0 for PM(10) and 0.7 for PM(2.5).The consistency of results has suggested that the method could be used as a tool to derive the ratio between OC and EC from fossil fuel combustion and consequently to differentiate OC from primary and secondary sources. To explore this capability, OC and EC measurements were performed in a busy roadway tunnel in central Lisbon. The OC/EC ratio, which reflected the composition of vehicle combustion emissions, was in the range of 03-0.4. Ratios of OC/EC in roadside increment air (roadside minus urban background) in Birmingham, UK also lie within the range 03-0.4. Additional measurements were performed under heavy traffic conditions at two double kerbside sites located in the centre of Lisbon and Madrid. The OC/EC minimum ratios observed at both sites were found to be between those of the tunnel and those of urban background air, suggesting that minimum values commonly obtained for this parameter in open urban atmospheres over-predict the direct emissions of OC(ff) from road transport. Possible reasons for this discrepancy are explored. (C) 2011 Elsevier Ltd. All rights reserved.