Determinação de autoanticorpos em doentes com suspeita de hepatite autoimune e cirrose biliar primária

O diagnóstico de doença hepática autoimune em doentes com patologia hepática implica a exclusão de outras causas de lesão hepática como vírica, alcoólica, tóxica, devido a alterações genéticas ou metabólicas, esteatose hepática não alcoólica e uma criteriosa avaliação de dados clínicos, bioquímicos, histológicos e colangiográficos especificas destas patologias (Invernizzi et al 2007) O diagnóstico e tratamento precoces destas patologias são fundamentais para a prevenção da alta morbilidade e mortalidade associada a estes doentes. O despiste de patologia hepática autoimune assenta na utilização de testes serológicos para a deteção de autoanticorpos associados a estas patologias. O conhecimento destes testes e a interpretação dos resultados obtidos revelam-se fundamentais para o diagnóstico ou exclusão destas doenças (Beuers 2005). Deste modo, foi objetivo deste trabalho a pesquisa e identificação de autoanticorpos em uso clínico: ANA, AMA, AML, ANCA, Anti-SLA/LP, anti-LKM, anti-LC1 e anti-actina F, em doentes com suspeita de HAI e CBP em que foi excluída causa vírica, alcoólica e tóxica. O trabalho incidiu particularmente na comparação dos resultados do perfil de autoanticorpos de pedidos feitos ao exterior com os resultados obtidos recorrendo à utilização de um novo kit de imunoblot, e assim determinar a relevância da introdução da pesquisa dos novos autoanticorpos e avaliar a relação custo/benefício da implementação do kit BlueDot liver da D-tek® na rotina laboratorial do serviço de Patologia Clínica do Hospital Pedro Hispano. Os resultados encontrados foram de 100% de concordância entre os métodos de imunofluorescência indireta e imunoblot, e Elisa e Imunoblot. Deste modo seria uma boa estratégia a implementação desta última técnica na rotina laboratorial uma vez que proporciona uma rápida disponibilização dos resultados para o clínico, antecipando desta forma o diagnóstico e o início rápido do tratamento em benefício do doente. Por outro lado, quando analisámos a relação custo/beneficio, seria vantajosa a implementação desta técnica uma vez que o laboratório dispõe de capacidade técnica, e o custo de aquisição do kit não excede o valor praticado atualmente correspondendo a uma poupança de 51%.

O papel da angiogênese e da hemólise na úlcera de perna de pessoas com anemia falciforme

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Molecular imaging agents for detection of β-amyloid plaques in Alzheimer’s disease

The formation of amyloid structures is a neuropathological feature that characterizes several neurodegenerative disorders, such as Alzheimer´s and Parkinson´s disease. Up to now, the definitive diagnosis of these diseases can only be accomplished by immunostaining of post mortem brain tissues with dyes such Thioflavin T and congo red. Aiming at early in vivo diagnosis of Alzheimer´s disease (AD), several amyloid-avid radioprobes have been developed for b-amyloid imaging by positron emission tomography (PET) and single-photon emission computed tomography (SPECT). The aim of this paper is to present a perspective of the available amyloid imaging agents, special those that have been selected for clinical trials and are at the different stages of the US Food and Drugs Administration (FDA) approval.

Selecção do melhor descolorante para a eliminação da cor residual num efluente têxtil

Mestrado em Engenharia Química

Avaliação da performance empresarial: o economic value added (EVA®) e a sua relação com o valor da empresa

Mestrado em Contabilidade e Gestão das Instituições Financeiras

Tradução, validação e aplicação dos sistemas de pontuação de alerta precoce 'ViEWS' e 'NEWS' em Portugal

Mestrado em Gestão e Avaliação de Tecnologias da Saúde

Impact of a training course on the quality of malaria diagnosis by microscopy in Angola

Background: In Angola, malaria is an endemic disease having a major impact on the economy. The WHO recommends testing for all suspected malaria cases, to avoid the presumptive treatment of this disease. In malaria endemic regions laboratory technicians must be very comfortable with microscopy, the golden standard for malaria diagnosis, to avoid the incorrect diagnosis. The improper use of medication promotes drug resistance and undesirable side effects. The present study aims to assess the impact of a three-day refresher course on the knowledge of technicians, quality of blood smears preparation and accuracy of microscopy malaria diagnosis, using qPCR as reference method. Methods: This study was implemented in laboratories from three hospitals in different provinces of Angola: Bengo, Benguela and Luanda. In each laboratory samples were collected before and after the training course (slide with thin and thick blood smears, a dried blood spot and a form). The impact of the intervention was evaluated through a written test, the quality of slide preparation and the performance of microscopy. Results: It was found a significant increase on the written test median score, from 52.5% to 65.0%. A total of 973 slides were analysed to evaluate the quality of thick and thin blood smears. Considering all laboratories there was a significant increase in quality of thick and thin blood smears. To determine the performance of microscopy using qPCR as the reference method we used 1,028 samples. Benguela presented the highest values for specificity, 92.9% and 98.8% pre and post-course, respectively and for sensitivity the best pre-course was Benguela (75.9%) and post-course Luanda (75.0%). However, no significant increase in sensitivity and specificity after the training course was registered in any laboratory analysed. Discussion: The findings of this study support the need of continuous refresher training for microscopists and other laboratory staff. The laboratories should have a quality control programme to supervise the diagnosis and also to assess the periodicity of new training. However, other variables needed to be considered to have a correct malaria diagnosis, such as adequate equipment and reagents for staining and visualization, good working conditions, motivated and qualified personnel.

Eco-efficiency approaches towards a sustainable composite materials manufacturing industry’

In this study the potential eco-efficiency performance of a pultrusion manufacturing company was assessed. Indicators values and eco-efficiency ratios were estimated taking into account the implementation of new proceedings and procedures in the production process of glass fibre reinforced polymers (GFRP) pultrusion profiles. Two different approaches were foreseen: 1)Adoption of a new heating system for pultrusion die in the manufacturing process, more effective and with minor heat losses; and 2) Recycling approach, with partial waste reuse of scrap material derived from manufacturing, cutting and assembly processes of GFRP profiles. These features lead to significant improvements on the sequent assessed eco-efficiency ratios of the present case study, yielding to a more sustainable product and manufacturing process of pultruded GFRP profiles.

A case study on the improvement of eco-efficiency ratios: application to a composite processing industry

The World Business Council for Sustainable Development (WBCSD) defines Eco-Efficiency as follows: ‘Eco- Efficiency is achieved by the delivery of competitively priced-goods and services that satisfy human needs and bring quality of life, while progressively reducing ecological impacts and resource intensity throughout the life-cycle to a level at least in line with the earth’s estimated carrying capacity’. Eco-Efficiency is under this point of view a key concept for sustainable development, bringing together economic and ecological progress. Measuring the Eco-Efficiency of a company, factory or business, is a complex process that involves the measurement and control of several and relevant parameters or indicators, globally applied to all companies in general, or specific according to the nature and specificities of the business itself. In this study, an attempt was made in order to measure and evaluate the eco-efficiency of a pultruded composite processing company. For this purpose the recommendations of WBCSD [1] and the directives of ISO 14301 standard [2] were followed and applied. The analysis was restricted to the main business branch of the company: the production and sale of standard GFRP pultrusion profiles. The main general indicators of eco-efficiency, as well as the specific indicators, were defined and determined according to ISO 14031 recommendations. With basis on indicators’ figures, the value profile, the environmental profile, and the pertinent eco-efficiency’s ratios were established and analyzed. In order to evaluate potential improvements on company eco-performance, new indicators values and ecoefficiency ratios were estimated taking into account the implementation of new proceedings and procedures, both in upstream and downstream of the production process, namely: a) Adoption of new heating system for pultrusion die in the manufacturing process, more effective and with minor heat losses; b) Implementation of new software for stock management (raw materials and final products) that minimize production failures and delivery delays to final consumer; c) Recycling approach, with partial waste reuse of scrap material derived from manufacturing, cutting and assembly processes of GFRP profiles. In particular, the last approach seems to significantly improve the eco-efficient performance of the company. Currently, by-products and wastes generated in the manufacturing process of GFRP profiles are landfilled, with supplementary added costs to this company traduced by transport of scrap, landfill taxes and required test analysis to waste materials. However, mechanical recycling of GFRP waste materials, with reduction to powdered and fibrous particulates, constitutes a recycling process that can be easily attained on heavy-duty cutting mills. The posterior reuse of obtained recyclates, either into a close-looping process, as filler replacement of resin matrix of GFRP profiles, or as reinforcement of other composite materials produced by the company, will drive to both costs reduction in raw materials and landfill process, and minimization of waste landfill. These features lead to significant improvements on the sequent assessed eco-efficiency ratios of the present case study, yielding to a more sustainable product and manufacturing process of pultruded GFRP profiles.

The frequency of blood-born viral infections in a population of multitransfused Brazilian patients

The frequency of viral markers for hepatitis B (HBV) and C (HCV), human immunodeficiency virus-1 (HIV-1) and human T-lymphotropic virus-1 (HTLV-1) was evaluated in 32 Brazilian ß-thalassemia multitransfused patients. Additionaly the serum concentrations of ferritin and alanine aspartate transaminase (ALAT) were determined. The results show a high prevalence of markers of infection by HBV (25.0%) and HCV (46.8%) and a low prevalence of markers for HIV-1 and HTLV-1. No correlations were demonstrated between the presence of the hepatitis markers and the number of units transfused or the serum concentrations of ferritin and ALAT.

Groundtruth system for underwater benchmarking

Oceans - San Diego, 2013

Sirolimus-Induced Drug Fever in a Renal Transplant Patient: a Case Report

Herein we have described the case of a male renal transplant recipient who developed drug fever apparently related to sirolimus. He had been stable under an immunosuppressive regimen of tacrolimus and mycophenolate mofetil, but developed acute cellular rejection at 5 years after transplantation due to noncompliance. Renal biopsy showed marked interstitial fibrosis, and immunosuppression was switched from mycophenolate to sirolimus, maintaining low tacrolimus levels. One month later he was admitted to our hospital for investigation of intermittently high fever, fatigue, myalgias, and diarrhea. Physical examination was unremarkable and drug levels were not increased. Lactic dehydrogenase and C-reactive protein were increased. The blood cell count and chest radiographic findings were normal. After extensive cultures, he was started on broad-spectrum antibiotics. Inflammatory markers and fever worsened, but diarrhea resolved. All serologic and imaging tests excluded infection, immune-mediated diseases, and malignancy. After 12 days antibiotics were stopped as no clinical improvement was achieved. Drug fever was suspected; sirolimus was replaced by mycophenolate mofetil. Fever and other symptoms disappeared after 24 hours; inflammatory markers normalized in a few days. After 1 month the patient was in good health with stable renal function. Although infrequent, the recognition of drug fever as a potential side effect of sirolimus may avoid unnecessary invasive diagnostic procedures. Nevertheless, exclusion of other common causes of fever is essential.

Chronic hepatitis C: hepatic iron content does not correlate with response to antiviral therapy

The complex interaction between hepatitis C virus infection, iron homeostasis and the response to antiviral treatment remains controversial. The aim of this study was to evaluate the influence of hepatic iron concentration (HIC) on the sustained virological response (SVR) to antiviral therapy in patients with chronic hepatitis C. A total of 50 patients who underwent pretreatment liver biopsy with assessment of HIC by graphite furnace atomic absorption spectroscopy and were subsequently submitted to antiviral treatment with interferon/peginterferon and ribavirin were included in the study. Patients with alcoholism, history of multiple blood transfusion, chronic kidney disease, hemolytic anemia and parenteral iron therapy were excluded. The iron related markers and HIC were compared between those who achieved an SVR and non-responders (NR) patients. The mean age was 45.7 years and the proportion of patients' gender was not different between SVR and NR patients. The median serum iron was 138 and 134 µg/dL (p = 0.9), the median serum ferritin was 152.5 and 179.5 ng/mL (p = 0.87) and the median HIC was 9.9 and 8.2 µmol/g dry tissue (p = 0.51), for SVR and NR patients, respectively. Thus, hepatic iron concentration, determined by a reliable quantitative method, was not a negative predictive factor of SVR in patients with chronic hepatitis C presenting mild to moderate hepatic iron accumulation.

Characterization of a Hepatitis B virus strain in southwestern Paraná, Brazil, presenting mutations previously associated with anti-HBs Resistance

The present study investigated if hepatitis B virus (HBV) mutants circulate in the southwestern region of the State of Paraná, Brazil, by analyzing samples from children who received immunoprophylaxis but were born to HBV carrier mothers. Samples from 25 children were screened for HBV serum markers and for HBV DNA by PCR. Only one sample was positive for HBsAg, anti-HBs and HBV DNA, although the child had been vaccinated. Analysis of the S gene sequence of this sample showed the presence of a proline at position 105, a serine at position 114, three threonines at positions 115, 116 and 140, and a glutamine at position 129. The presence of these amino acids, except for serine at position 114, has been related to monoclonal or polyclonal therapy with anti-HBs after liver transplantation, whereas the presence of threonine at position 116 has been described in immunized children from Singapore. This finding demonstrates the possible circulation of HBV strains resistant to hepatitis B immunoprophylaxis in southwestern Paraná, Brazil. The genotype of the sample was identified as genotype D, which is frequently found in the region studied. Since 36% of the children had received incomplete or no immunoprophylaxis, more extensive follow-up of children born to HBsAg-positive mothers is needed.

O papel da qualidade e auditoria interna na gestão de um município

Os Municípios, num contexto de reformas administrativas iniciadas pela filosofia da Nova Gestão Pública, vivem atualmente com um grau de exigência elevado onde questões como, a boa gestão dos escassos recursos, a prestação de serviços de qualidade aos munícipes e um maior escrutínio por parte destes, impõem pressão junto dos responsáveis e dos órgãos executivos desses municípios, para a mudança dos serviços e da gestão numa perspetiva de melhoria da qualidade. O presente relatório de estágio tem por objetivo perceber qual a relevância, que o serviço de qualidade e auditoria interna desempenha, na gestão de um município. A escolha do estudo de caso incidiu sobre, a Câmara Municipal da Maia, local de realização do estágio. Neste contexto, após a revisão da literatura, será realizado um estudo em que, será criado um modelo de análise que irá testar, a implementação da gestão da qualidade, a monitorização de indicadores de desempenho e o contributo da auditoria interna, na gestão da Camara Municipal da Maia, no sentido de se chegar a uma conclusão final. Assim, será analisada de forma detalhada, a posição do órgão executivo, mediante a realização de uma entrevista para recolha de dados qualitativos, que posteriormente serão tratados. Na parte final deste relatório, iremos discutir os resultados obtidos e concluir sobre qual o papel e a importância que o serviço de qualidade e auditoria interna desempenha, na gestão da Câmara Municipal da Maia. Como limitação principal deste estudo refere-se o facto de as matérias a tratar serem todas de natureza sensível e com caráter sigiloso, o que inviabiliza a divulgação de alguns dados relevantes.