Analysis of multicomponent adsorption kinetics on activated carbon

An integrated mathematical model for the kinetics of multicomponent adsorption on microporous carbon was developed. Transport in this bidisperse solid is represented by balance equations in the macropore and micropore phases, in which gas-phase diffusion dominates the mass transfer in the macropores, with the phenomenological diffusivities represented by the generalized Maxwell-Stefan (GMS) formulation. Viscous flow also contributes to the macropore fluxes and is included in the MS expressions. Diffusion of the adsorbed phase controls the mass transfer in the micro ore phase, p which is also described in a similar way by the MS method. The adsorption isotherms are represented by a new heterogeneous modified vacancy solution theory formulation of adsorption, which has proved to be a robust method for adsorption on activated carbons. The model is applied to the coadsorption and codesorption of C2H6 and C3H8 on Ajax and Norit carbon, as well as the displacement on Ajax carbon. The effect of the viscous flow in the macropore phase is not significant for the cases studied. The model accurately predicts the overshoot behavior and rollup of C2H6 during coadsorption. The prediction for the heavier compound C3H8 is always satisfactory, though at higher C3H8 mole fraction, the overshoot extent of C2H6 is overpredicted, possibly due to neglect of heat effects.

Synthesis of novel 2-amino-1,3-thiazole-5-carboxylates utilising ultrasonic and thermally mediated aminolysis

Novel 2-amino-1,3-thiazole-5-carboxylates have been synthesised in high yield by unprecedented ultrasonic and thermally mediated nucleophilic displacement of bromide from ethyl 2-bromo-1,3-thiazole-5-carboxylate by primary, secondary and aryl amines.

Elites estatais e reforma do estado na nova rep??blica: o projeto Enap e a forma????o da carreira de gestor governamental no Brasil

Os objetos desta pesquisa s??o: 1) a atua????o das elites burocr??ticas do Poder Executivo Federal no processo de transi????o pol??tica no Brasil, nos anos 1980; 2) as frentes de reforma na Nova Rep??blica, nas ??reas social, econ??mica e administrativa e 3) as tentativas de renova????o da gest??o p??blica representadas pela cria????o da Escola Nacional de Administra????o P??blica (ENAP) e da Carreira de Gestor Governamental (EPPGG). Esse era um contexto de reinstitucionaliza????o da fun????o diretiva do Estado e de deslocamento das fronteiras entre o burocr??tico e o pol??tico no setor p??blico brasileiro. A hip??tese central aqui defendida ?? de que a ENAP e a Carreira de Gestor Governamental eram duas op????es inovadoras frente ao dilema sobre quais seriam os pap??is cab??veis a pol??ticos e administradores na nova ordem democr??tica, mas tamb??m eram op????es sem enraizamento nos pactos e agendas de prioridades que viabilizaram a mudan??a de regime no pa??s. A Escola e a Carreira estavam em disson??ncia com as principais tend??ncias de recomposi????o das elites estatais na transi????o a partir do regime militar e sofreram bloqueios em raz??o disso, mas a pesquisa procurou desconstruir algumas narrativas sobre esses conflitos interburocr??ticos, que associam as resist??ncias impostas ?? ENAP e ?? Carreira pelos grupos de funcion??rios da Fazenda e Planejamento a interesses meramente corporativistas. Com um trajeto pelos estudos sobre as burocracias dos regimes militares e sobre as transi????es no Brasil e na Am??rica Latina, buscou-se aqui uma melhor identifica????o dos grupos integrantes das ???tecnoburocracias??? e de suas contribui????es para a moderniza????o administrativa e econ??mica do pa??s, na segunda metade do s??culo XX. Buscou-se revelar algumas conflu??ncias entre as ideias de tecnocratiza????o e profissionaliza????o das altas fun????es p??blicas e seus elos com as aspira????es pela reconstru????o do Estado sob bases mais democr??ticas, mostrando que, nos anos 1980, as propostas da SEDAP n??o eram os ??nicos projetos de moderniza????o em curso, tampouco os grupos que a elas se opuseram representavam interesses univocamente antidemocr??ticos.

Tramas e urdiduras: o protagonismo como exercício na atividade docente de professores de educação física

Trata-se de uma pesquisa-intervenção com o objetivo principal de analisar como os professores fazem exercício protagonista na atividade. Embasa-se principalmente no aporte conceitual da perspectiva ergológica de Yves Schwartz para realizar a análise da atividade no cotidiano escolar. O estudo foi desenvolvido em uma Escola Municipal de Ensino Fundamental de Serra/ES com duas professoras e um professor de Educação Física. As estratégias metodológicas utilizadas foram constituídas de acompanhamento da atividade desenvolvida pelos professores nas aulas, no Curso de Formação Permanente de Área de Educação Física, promovido pela Secretaria Municipal de Educação, participação no cotidiano escolar e a construção coletiva de um processo de formação na escola por meio de oficinas de práticas corporais. As técnicas de produção e registro dos dados foram compostas por diário de campo, fotos, conversas gravadas em áudio, entrevistas, questionário e documentos elaborados pela escola, como o Projeto Político-Pedagógico. A confrontação dos dados realizada com os docentes nas conversas produziu importantes deslocamentos nas análises e convocou autores e conceitos que não estavam previstos para o debate sobre o exercício protagonista. A produção dos dados gerou mudança na atividade docente e colocou em questão modos de gestão e organização do trabalho na Rede Serra de Educação, provocando transformações nos modelos de formação permanente dos professores de Educação Física do município. Os exercícios protagonistas empreendidos na atividade docente colocaram competências em circulação e tornaram visíveis os efeitos de trama e urdidura que atravessam e compõem a atividade docente dos professores de Educação Física no cotidiano escolar.

Reflexões sobre a apropriação de objetos na arte contemporânea

Nesta dissertação discutimos os movimentos em torno da temática da apropriação evidenciando o deslocamento do objeto de uso comum para o campo da arte em três movimentos paradigmáticos: o Dadaísmo, o Surrealismo e o Novo Realismo, e seus desdobramentos na arte contemporânea no sentido de legado cultural. Permitimo-nos transitar pelas demais vertentes dos processos de apropriação na arte nova-iorquina e europeia seguindo as propostas da arte com objetos. Investigamos os processos envolvidos nas controvérsias do ready-made, executado por Marcel Duchamp desde 1913, para dar partida ao percurso histórico das manifestações onde ocorre o objet trouvé, a colagem e a assemblagem. Nosso objetivo é responder à pergunta com a qual o filósofo Arthur C. Danto inicia suas investigações filosóficas acerca das apropriações e condições que fazem de um objeto comum uma obra de arte. Para tanto buscamos as teorias de Abrahan Moles e Jean Baudrillard acerca do objeto industrializado e Roland Barthes com as questões metalingüísticas de sua função-signo. Para discutir tais relações da arte com os objetos, recorremos aos textos de Peter Bürger, André Breton, Pierre Restany, Gregory Battcock, Walter Benjamin, Hal Foster e outros. Destacamos alguns trabalhos artísticos, evidenciando o objeto caixa, tratado como um utilitário com forma e finalidade definidas, reafirmando-se como objeto de consumo, no discurso sobre a poética do espaço de Gaston Bachelard. A pesquisa propõe analisar as transformações radicais das estruturas conservadoras da arte e especular sobre o gesto de apropriação dos objetos, com algumas reflexões direcionadas sobre o objeto e a transgressividade da apropriação como experiência de tensão e poder.

Implementação de formulações do método dos elementos de contorno para associação de placas no espaço

Tese (doutorado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Mecânica, 2016.

Moravia : das lógicas da informalidade às lógicas da formalidade

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Arquitetura e Urbanismo, Programa de Pós-Graduação em Arquitetura e Urbanismo, 2016.

Pectus Excavatum postsurgical outcome based on preoperative soft body dynamics simulation

Pectus excavatum is the most common congenital deformity of the anterior chest wall, in which an abnormal formation of the rib cage gives the chest a caved-in or sunken appearance. Today, the surgical correction of this deformity is carried out in children and adults through Nuss technic, which consists in the placement of a prosthetic bar under the sternum and over the ribs. Although this technique has been shown to be safe and reliable, not all patients have achieved adequate cosmetic outcome. This often leads to psychological problems and social stress, before and after the surgical correction. This paper targets this particular problem by presenting a method to predict the patient surgical outcome based on pre-surgical imagiologic information and chest skin dynamic modulation. The proposed approach uses the patient pre-surgical thoracic CT scan and anatomical-surgical references to perform a 3D segmentation of the left ribs, right ribs, sternum and skin. The technique encompasses three steps: a) approximation of the cartilages, between the ribs and the sternum, trough b-spline interpolation; b) a volumetric mass spring model that connects two layers - inner skin layer based on the outer pleura contour and the outer surface skin; and c) displacement of the sternum according to the prosthetic bar position. A dynamic model of the skin around the chest wall region was generated, capable of simulating the effect of the movement of the prosthetic bar along the sternum. The results were compared and validated with patient postsurgical skin surface acquired with Polhemus FastSCAN system

Finite element analysis of pectus carinatum surgical correction via a minimally invasive approach

Pectus carinatum (PC) is a chest deformity caused by a disproportionate growth of the costal cartilages compared to the bony thoracic skeleton, pulling the sternum towards, which leads to its protrusion. There has been a growing interest on using the ‘reversed Nuss’ technique as minimally invasive procedure for PC surgical correction. A corrective bar is introduced between the skin and the thoracic cage and positioned on top of the sternum highest protrusion area for continuous pressure. Then, it is fixed to the ribs and kept implanted for about 2–3 years. The purpose of this work was to (a) assess the stresses distribution on the thoracic cage that arise from the procedure, and (b) investigate the impact of different positioning of the corrective bar along the sternum. The higher stresses were generated on the 4th, 5th and 6th ribs backend, supporting the hypothesis of pectus deformities correction-induced scoliosis. The different bar positioning originated different stresses on the ribs’ backend. The bar position that led to lower stresses generated on the ribs backend was the one that also led to the smallest sternum displacement. However, this may be preferred, as the risk of induced scoliosis is lowered.

Real-time hand tracking for rehabilitation and character animation

Hand and finger tracking has a major importance in healthcare, for rehabilitation of hand function required due to a neurological disorder, and in virtual environment applications, like characters animation for on-line games or movies. Current solutions consist mostly of motion tracking gloves with embedded resistive bend sensors that most often suffer from signal drift, sensor saturation, sensor displacement and complex calibration procedures. More advanced solutions provide better tracking stability, but at the expense of a higher cost. The proposed solution aims to provide the required precision, stability and feasibility through the combination of eleven inertial measurements units (IMUs). Each unit captures the spatial orientation of the attached body. To fully capture the hand movement, each finger encompasses two units (at the proximal and distal phalanges), plus one unit at the back of the hand. The proposed glove was validated in two distinct steps: a) evaluation of the sensors’ accuracy and stability over time; b) evaluation of the bending trajectories during usual finger flexion tasks based on the intra-class correlation coefficient (ICC). Results revealed that the glove was sensitive mainly to magnetic field distortions and sensors tuning. The inclusion of a hard and soft iron correction algorithm and accelerometer and gyro drift and temperature compensation methods provided increased stability and precision. Finger trajectories evaluation yielded high ICC values with an overall reliability within application’s satisfying limits. The developed low cost system provides a straightforward calibration and usability, qualifying the device for hand and finger tracking in healthcare and animation industries.

Histological alterations in liver and testis of Astyanax aff. bimaculatus caused by acute exposition to zinc

This study investigated the effect of acute exposition to zinc (Zn) on histology of the liver and testes of yellow tail lambari (Astyanax aff. bimaculatus). The exposure consisted of six concentrations of Zn (0, 3, 5, 10, 15, and 20 mg/L) for 96 hours of exposure. Fragments of liver and testis were routinely processed and embedded in plastic resin based on glycol methacrylate. Fragments of bones, muscles, liver and testis were dehydrated and digested to quantify the absorption levels of Zn in the tissue. Acute exposure to concentrations above 10mg/L has produced structural changes in the liver and gonads. The changes found in the liver were vascular congestion; decrease of cellular volume; displacement of the hepatocyte nucleus; necrosis; disarrangement of cordon structure; leukocyte infiltrate and vacuolization. The changes found in the gonads were ruptured cyst, delayed development of germ cells, pyknotic nucleus, cell cluster, displacement of cyst wall and vacuolization. The histological changes observed were compatible with the increasing concentration of zinc in environment, compromising liver and reproductive functions, because there was an increase in relative frequency of hepatocytes and reduced sperm production

Dense motion field estimation from myocardial boundary displacements

Minimally invasive cardiovascular interventions guided by multiple imaging modalities are rapidly gaining clinical acceptance for the treatment of several cardiovascular diseases. These images are typically fused with richly detailed pre-operative scans through registration techniques, enhancing the intra-operative clinical data and easing the image-guided procedures. Nonetheless, rigid models have been used to align the different modalities, not taking into account the anatomical variations of the cardiac muscle throughout the cardiac cycle. In the current study, we present a novel strategy to compensate the beat-to-beat physiological adaptation of the myocardium. Hereto, we intend to prove that a complete myocardial motion field can be quickly recovered from the displacement field at the myocardial boundaries, therefore being an efficient strategy to locally deform the cardiac muscle. We address this hypothesis by comparing three different strategies to recover a dense myocardial motion field from a sparse one, namely, a diffusion-based approach, thin-plate splines, and multiquadric radial basis functions. Two experimental setups were used to validate the proposed strategy. First, an in silico validation was carried out on synthetic motion fields obtained from two realistic simulated ultrasound sequences. Then, 45 mid-ventricular 2D sequences of cine magnetic resonance imaging were processed to further evaluate the different approaches. The results showed that accurate boundary tracking combined with dense myocardial recovery via interpolation/ diffusion is a potentially viable solution to speed up dense myocardial motion field estimation and, consequently, to deform/compensate the myocardial wall throughout the cardiac cycle. Copyright © 2015 John Wiley & Sons, Ltd.

Optimal design of piezolaminated structures using B-spline strip finite element models

A package of B-spline finite strip models is developed for the linear analysis of piezolaminated plates and shells. This package is associated to a global optimization technique in order to enhance the performance of these types of structures, subjected to various types of objective functions and/or constraints, with discrete and continuous design variables. The models considered are based on a higher-order displacement field and one can apply them to the static, free vibration and buckling analyses of laminated adaptive structures with arbitrary lay-ups, loading and boundary conditions. Genetic algorithms, with either binary or floating point encoding of design variables, were considered to find optimal locations of piezoelectric actuators as well as to determine the best voltages applied to them in order to obtain a desired structure shape. These models provide an overall economy of computing effort for static and vibration problems.

Simulação numérica do comportamento dinâmico de uma laje

Nesta dissertação pretende-se simular o comportamento dinâmico de uma laje de betão armado aplicando o Método de Elementos Finitos através da sua implementação no programa FreeFEM++. Este programa permite-nos a análise do modelo matemático tridimensional da Teoria da Elasticidade Linear, englobando a Equação de Equilíbrio, Equação de Compatibilidade e Relações Constitutivas. Tratando-se de um problema dinâmico é necessário recorrer a métodos numéricos de Integração Directa de modo a obter a resposta em termos de deslocamento ao longo do tempo. Para este trabalho escolhemos o Método de Newmark e o Método de Euler para a discretização temporal, um pela sua popularidade e o outro pela sua simplicidade de implementação. Os resultados obtidos pelo FreeFEM++ são validados através da comparação com resultados adquiridos a partir do SAP2000 e de Soluções Teóricas, quando possível.

The source of the 1722 Algarve earthquake: evidence from MCS and tsunami data

The 27 December 1722 Algarve earthquake destroyed a large area in southern Portugal generating a local tsunami that inundated the shallow areas of Tavira. It is unclear whether its source was located onshore or offshore and, in any case, what was the tectonic source responsible for the event. We analyze available historical information concerning macroseismicity and the tsunami to discuss the most probable location of the source. We also review available seismotectonic knowledge of the offshore region close to the probable epicenter, selecting a set of four candidate sources. We simulate tsunamis produced by these candidate sources assuming that the sea bottom displacement is caused by a compressive dislocation over a rectangular fault, as given by the half-space homogeneous elastic approach, and we use numerical modeling to study wave propagation and run-up. We conclude that the 27 December 1722 Tavira earthquake and tsunami was probably generated offshore, close to 37 degrees 01'N, 7 degrees 49'W.