Comportamento da adição do carbeto de nióbio (nBC) na matriz metálica do aço ferrítico 15kH2mfa

The 15Kh2MFA steel is a kind of Cr-Mo-V family steels and can be used in turbines for energy generation, pressure vessels, nuclear reactors or applications where the range of temperature that the material works is between 250 to 450°C. To improve the properties of these steels increasing the service temperature and the thermal stability is add a second particle phase. These particles can be oxides, carbides, nitrites or even solid solution of some chemical elements. On this way, this work aim to study the effect of addition of 3wt% of niobium carbide in the metallic matrix of 15Kh2MFA steel. Powder metallurgy was the route employed to produce this metallic matrix composite. Two different milling conditions were performed. Condition 1: milling of pure 15Kh2MFA steel and condition 2: milling of 15Kh2MFA steel with addition of niobium carbide. A high energy milling was carried out during 5 hours. Then, these two powders were sintered in a vacuum furnace (10-4torr) at 1150 and 1250°C during 60 minutes. After sintering the samples were normalized at 950°C per 3 minutes followed by air cooling to obtain a desired microstructure. Results show that the addition of niobium carbide helps to mill faster the particles during the milling when compared with that steel without carbide. At the sintering, the niobium carbide helps to sinter increasing the density of the samples reaching a maximum density of 7.86g/cm³, better than the melted steel as received that was 7,81g/cm³. In spite this good densification, after normalizing, the niobium carbide don t contributed to increase the microhardness. The best microhardness obtained to the steel with niobium carbide was 156HV and to pure 15Kh2MFA steel was 212HV. It happened due when the niobium carbide is added to the steel a pearlitic structure was formed, and the steel without niobium carbide submitted to the same conditions reached a bainitic structure

Batalhão de Infantaria Mecanizado Português vs Regimento de Infantaria Mecanizado Francês : Estudo comparativo

Este trabalho de investigação aplicada é o reflexo de um estudo comparativo entre duas forças mecanizadas, nomeadamente o Batalhão de Infantaria Mecanizado português e o Regimento de Infantaria Mecanizado francês. Este estudo incide sobre quatro vetores de desenvolvimento, nomeadamente, a doutrina ao nível da tipologia das forças em estudo, da organização, ou seja, dos seus quadros orgânicos, ao material, mais propriamente os principais sistemas de armas empregues pelas duas forças, assim como às infraestruturas disponíveis para treino. O presente trabalho trata de um estudo comparativo, tendo como natureza a investigação aplicada. Este estudo comparativo tem como principal objetivo confrontar a doutrina com a prática, bem como identificar e caracterizar as principais vulnerabilidades e potencialidades das duas forças em estudo, tendo em conta os vetores de desenvolvimento anteriormente apresentados, podendo assim, rentabilizar os meios em uso no Batalhão de Infantaria Mecanizado e/ou contribuir para uma futura aquisição. Verificámos que a principal diferença entre as duas forças em estudo assenta na sua tipologia, isto é, enquanto que a força francesa é considerada pesada, a força portuguesa é média, embora pretenda e esteja no caminho de vir a ser uma força pesada. O que nos leva à grande diferença, derivada da tipologia de forças, que são as viaturas empregues pelas duas forças, ou seja, uma viatura blindada de transporte de pessoal e uma viatura de combate de infantaria. Para se assumir como força pesada, o Batalhão de Infantaria Mecanizado português, precisa de adquirir uma viatura de combate de infantaria, para assim, dar o “salto” qualitativo, numa perspetiva de armas combinadas. Palavras-Chave: Mecanizado, Vetores de Desenvolvimento, Viatura Blindada Transporte Pessoal, Viatura Combate de Infantaria.

A aquisição de bens e serviços no Exército

O presente trabalho de investigação aplicada subordinado ao tema “Aquisição dos bens e serviços ao nível do Exército” visa descrever que medidas podem ser implementadas no sistema aquisitivo do Exército para minimizar os custos e melhorar a racionalização de diversos recursos. O presente trabalho estrutura-se em duas partes. A primeira parte consiste numa exposição teórica, na qual são abordados diversos temas como as “compras”, a descentralização e centralização, a regência da Administração Pública ao nível da contratação pública. Numa segunda parte, é definido o trabalho de campo, no qual são descritas as entrevistas realizadas com intuito de obter informações no que concerne a metodologias, fluxos e procedimentos adotados por parte dos ramos das Forças Armadas e Guarda Nacional Republicana, bem como a análise estatística das aquisições dos bens e serviços de 2015 Este trabalho foi realizado com recurso a uma metodologia hipotético-dedutiva, tendo a sua realização permitido o esclarecimento de hipóteses previamente colocadas. A investigação concluiu que o sistema aquisitivo do Exército possui muitas fragilidades que o impossibilitam de usufruir das vantagens que a centralização acarreta, nomeadamente as economias de escala. Tal deve-se a diversas lacunas existentes, particularmente a falta de planeamento.

Desempenho de variedades crioulas e comerciais de feijão-macassar ou feijão-caupi no agreste paraibano.

2016

Desenvolvimento de sistemas de aditivos químicos para aplicação em cimentações de poços de petróleo

The primary cementing is an important step in the oilwell drilling process, ensuring the mechanical stability of the well and the hydraulic isolation between casing and formation. For slurries to meet the requirements for application in a certain well, some care in the project should be taken into account to obtain a cement paste with the proper composition. In most cases, it is necessary to add chemicals to the cement to modify its properties, according to the operation conditions and thus obtain slurries that can move inside the jacket providing a good displacement to the interest area. New technologies of preparation and use of chemicals and modernization of technological standards in the construction industry have resulted in the development of new chemical additives for optimizing the properties of building materials. Products such as polycarboxylate superplasticizers provide improved fluidity and cohesion of the cement grains, in addition to improving the dispersion with respect to slurries without additives. This study aimed at adapting chemical additives used in civil construction to be used use in oilwell cement slurries systems, using Portland cement CPP-Special Class as the hydraulic binder. The chemical additives classified as defoamer, dispersant, fluid loss controller and retarder were characterized by infrared absorption spectroscopy, thermogravimetric analyses and technological tests set by the API (American Petroleum Institute). These additives showed satisfactory results for its application in cement slurries systems for oil wells. The silicone-based defoamer promoted the reduction of air bubbles incorporated during the stirring of the slurries. The dispersant significantly reduced the rheological parameters of the systems studied. The tests performed with the fluid loss controller and the retarder also resulted in suitable properties for application as chemical additives in cement slurries

Cost sharing solutions defined by non-negative eigenvectors

The problem of sharing a cost M among n individuals, identified by some characteristic ci∈R+,ci∈R+, appears in many real situations. Two important proposals on how to share the cost are the egalitarian and the proportional solutions. In different situations a combination of both distributions provides an interesting approach to the cost sharing problem. In this paper we obtain a family of (compromise) solutions associated to the Perron’s eigenvectors of Levinger’s transformations of a characteristics matrix A. This family includes both the egalitarian and proportional solutions, as well as a set of suitable intermediate proposals, which we analyze in some specific contexts, as claims problems and inventory cost games.

Pirólise rápida catalítica do capim elefante utilizando materiais mesoporosos e óxidos metálicos para deoxigenação em bio-óleo

The fast pyrolysis of lignocellulosic biomass is a thermochemical conversion process for production energy which have been very atratactive due to energetic use of its products: gas (CO, CO2, H2, CH4, etc.), liquid (bio-oil) and charcoal. The bio-oil is the main product of fast pyrolysis, and its final composition and characteristics is intrinsically related to quality of biomass (ash disposal, moisture, content of cellulose, hemicellulose and lignin) and efficiency removal of oxygen compounds that cause undesirable features such as increased viscosity, instability, corrosiveness and low calorific value. The oxygenates are originated in the conventional process of biomass pyrolysis, where the use of solid catalysts allows minimization of these products by improving the bio-oil quality. The present study aims to evaluate the products of catalytic pyrolysis of elephant grass (Pennisetum purpureum Schum) using solid catalysts as tungsten oxides, supported or not in mesoporous materials like MCM-41, derived silica from rice husk ash, aimed to reduce oxygenates produced in pyrolysis. The biomasss treatment by washing with heated water (CEL) or washing with acid solution (CELix) and application of tungsten catalysts on vapors from the pyrolysis process was designed to improve the pyrolysis products quality. Conventional and catalytic pyrolysis of biomass was performed in a micro-pyrolyzer, Py-5200, coupled to GC/MS. The synthesized catalysts were characterized by X ray diffraction, infrared spectroscopy, X ray fluorescence, temperature programmed reduction and thermogravimetric analysis. Kinetic studies applying the Flynn and Wall model were performed in order to evaluate the apparent activation energy of holoceluloce thermal decomposition on samples elephant grass (CE, CEL and CELix). The results show the effectiveness of the treatment process, reducing the ash content, and were also observed decrease in the apparent activation energy of these samples. The catalytic pyrolysis process converted most of the oxygenate componds in aromatics such as benzene, toluene, ethylbenzene, etc

Encalhes de Cetáceos ocorridos no período de 1984 a 2005 no litoral do Rio Grande do Norte, Brasil

Strandings of live or dead aquatic mammals constitute an important instrument to provide information regarding the occurrence, biology and ecology of these species. The aim of this study was to register the stranded species of cetaceans, the frequency and the spatial-temporal distribution of theses strandings during the period of 1984 to 2005, in the coast of Rio Grande do Norte. Data was acquired through the monitoring of strandings in the north, north-west and south coast of RN, and through information obtained from institutions and newspaper archives of the State. A total of 122 strandings of cetaceans were registered along the coast of Rio Grande do Norte. Of the 14 species of cetaceans registered, four species had higher frequencies: Sotalia guianensis (n= 65), Steno bredanensis (n = 6), Globicephala macrorhynchus (n = 6) and Physeter macrocephalus (n = 7). Out of 118 strandings, 93 occurred in the south coast (78.8 %), 23 in the north coast (19.5%) and 2 (1.7%) in the north-west coast of the State. The highest frequency of strandings occurred during the months of August to March and the maximum number of strandings occurred from 2000 onwards, as a consequence of the intense monitoring of the Pequenos Cetáceos Project in Rio Grande do Norte

A identificação dos saberes já detidos pelos alunos do meio rural decorrentes da atividade agrícola no campo sobre a perspectiva do conhecimento químico formal no curso técnico integrado em agropecuária

Dissertação de mestrado com vista à obtenção do Grau de Mestre em Educação Social e Intervenção Comunitária.

A identificação dos saberes já detidos pelos alunos do meio rural decorrentes da atividade agrícola no campo sobre a perspectiva do conhecimento químico formal no curso técnico integrado em agropecuária

Dissertação de mestrado com vista à obtenção do Grau de Mestre em Educação Social e Intervenção Comunitária.

Developmentof engineering projects supported by BIM technology: internship report

Building Information Modeling (BIM) concept is able to reshape each AEC project and the industry in general, offering a comprehensive collaboration process over a model of structure with regularly actualized and synchronized information. This report presents an overview of BIM with focus on its core concepts, applications in the project life cycle and benefits for project stakeholders through four case studies carried out during the internship in the engineering office NEWTON - Engineering Consultancy Company. The aim of the four cases studies was to cover multidisciplinary and varied projects. The first case study highlights the engineering project’s workflow and presents a comparison of traditional procedures and BIM concepts applied on the rehabilitation of an existing building. In the second and third case study, attention is focused on the goals achieved, particularly by structural engineer, due to the implementation of the mentioned technology on a full-lifecycle BIM project of a small residence and a complex project of residential building in Porto and on its architectural integration. In addition, through the fourth case study, the spatial coordination of Mechanical, Electrical and Plumbing (MEP) systems at a large-scale hotel project has been analyzed and accomplished, highlighting merits of BIM at this project stage. Through a reduction of the space used for facilities and infrastructures and the ability to identify conflicts and to nullify the related costs, its advantage for a complex building was proved.

Nacionalismo y performance: la celebración del primer Centenario del nacimiento de Simón Bolívar en Bogotá, 1883.

El presente trabajo son analizan las representaciones nacionalistas elaboradas por la sociedad bogotana en el marco de la celebración del Centenario de Simón Bolívar en 1883. La celebración es tomada como una puesta en escena, en la medida en que es un evento en donde los ámbitos de producción y recepción se entrelazan en un solo momento. En este sentido, se parte desde las concepciones nacionalistas impulsadas por los políticos de la Regeneración, la cual consintió en la modernización de Colombia a través de la tradición, para luego evidenciar cómo estas ideas y conflictos en torno a diversos ideales de nación se entablaron en el ámbito del Centenario. En el Centenario se pregona un cese a las hostilidades internas, una unidad nacional y una identificación del país bajo la figura de Simón Bolívar como padre y caudillo de la patria en la búsqueda hacia ‘la civilización’ y el ‘progreso’ de la nación. Así, el presente trabajo aporta a los estudios históricos en clave cultural de las celebraciones centenarias en Colombia y su incidencia en la construcción de la nación durante el siglo XIX.

Clínica e cirurgia de espécies pecuárias

O presente relatório, inerente ao estágio curricular do Mestrado Integrado em Medicina Veterinária da Universidade de Évora, tem como objetivo descrever as atividades desenvolvidas durante o estágio na área da clínica e cirurgia de espécies pecuárias. A primeira parte do relatório consiste na descrição do local de estágio e na distribuição casuística das atividades acompanhadas. A segunda parte consiste numa revisão bibliográfica e no desenvolvimento de dois casos clínicos ocorridos em bovinos, relacionados com o tema, “necrobacilose hepática bovina” (NHB). A NHB é uma doença infecciosa de grande impacto económico, principalmente em explorações de bovinos de engorda intensiva. Carateriza-se pela formação de abcessos hepáticos, cujo agente etiológico primário é Fusobacterium necrophorum. É de difícil diagnóstico em vida, raramente demonstra sinais clínicos e o seu tratamento é pouco eficaz. A prevenção baseia-se na adição de antimicrobianos na alimentação, num correto maneio alimentar e eventualmente vacinação; Abstract: Medical and Surgical Pathology of livestock species The present report, inherent of the master in Veterinary Medicine from the University of Évora, aims to describe the activities carried out during the internship in the field of clinic and surgery of livestock species. The first part of the report is the description of the local of internship and the statistical distribution of activities. The second part consists of a literature review and the development of two clinical cases in cattle, related to the theme, “hepatic bovine necrobacillosis "(HBN). The HBN is an infectious disease of great economic impact, especially in feedlot cattle. It is characterized by the formation of liver abscesses, whose primary etiological agent is Fusobacterium necrophorum. It is difficult to diagnose in life, rarely show clinical signs and their treatment is ineffective. Prevention is based on the addition of antimicrobials in food, a correct feed management and eventually vaccination.

Early Carboniferous synorogenic basins evolution of the Ossa-Morena and

The stratigraphic record of the Early Carboniferous in Iberia reveals that synorogenic deposition was important and occurred simultaneously in basins influenced by extension and contraction with gravitational instability. In NW Iberia (Galicia – Trás-os-Montes Zone) contraction was dominant and the deposition took place in a forebulge outwards from the nappe stacking front. Here, synorogenic deposits were strongly affected by folding and thrusting as they were imbricated and incorporated in the allochthonous pile. In a different way, in SW Iberia (Ossa-Morena Zone) synorogenic deposition was influenced by extension and happened simultaneously with the onset of significant magmatism.

Superposition relations of microfabrics in the northern hanging-wall block

This study reports alternation of D2 extension-related and D3 contraction-related microfabrics in the northern hanging wall block of a gneiss dome-like structure recognized in the Évora Massif (Ossa-Morena Zone). In the Arraiolos – Santo Antonio de Alcorrego traverse high- to low-grade mylonites are dominant. Microfabrics related to D2 ductile deformation and M2 high-amphibolite to greenschist facies characterize an extensional shear zone with telescoping metamorphic isograds. D2 microstructures indicate shear sense with top-to-SE. Superposition of D3 contraction developed under greenschist facies (M3) producing folding of D2 microfabrics, mylonitization of granites along strike-slip shear zones and retrogression of M2 mineral assemblages.