Measurement of the net environmental benefit of offsetting in Queensland

The process of offsetting land against unavoidable disturbance of development sites in Queensland will benefit from a method that allows the best possible selection to be made of alternative lands. With site selection now advocated through a combination of Regional Ecosystem and Land Capability classifications state-wide, a case study has determined methods of assessing the functional lift – that is, measures of net environmental gain – of such action. Outcomes with potentially high functional lift are determined, that offer promise not only for endangered ecosystems but also for managing adjacent conservation reserves.

Continuous appearance-based trajectory SLAM

This paper describes a novel probabilistic approach to incorporating odometric information into appearance-based SLAM systems, without performing metric map construction or calculating relative feature geometry. The proposed system, dubbed Continuous Appearance-based Trajectory SLAM (CAT-SLAM), represents location as a probability distribution along a trajectory, and represents appearance continuously over the trajectory rather than at discrete locations. The distribution is evaluated using a Rao-Blackwellised particle filter, which weights particles based on local appearance and odometric similarity and explicitly models both the likelihood of revisiting previous locations and visiting new locations. A modified resampling scheme counters particle deprivation and allows loop closure updates to be performed in constant time regardless of map size. We compare the performance of CAT-SLAM to FAB-MAP (an appearance-only SLAM algorithm) in an outdoor environment, demonstrating a threefold increase in the number of correct loop closures detected by CAT-SLAM.

Development of an online condition monitoring system for slow speed machinery

One of the main challenges of slow speed machinery condition monitoring is that the energy generated from an incipient defect is too weak to be detected by traditional vibration measurements due to its low impact energy. Acoustic emission (AE) measurement is an alternative for this as it has the ability to detect crack initiations or rubbing between moving surfaces. However, AE measurement requires high sampling frequency and consequently huge amount of data are obtained to be processed. It also requires expensive hardware to capture those data, storage and involves signal processing techniques to retrieve valuable information on the state of the machine. AE signal has been utilised for early detection of defects in bearings and gears. This paper presents an online condition monitoring (CM) system for slow speed machinery, which attempts to overcome those challenges. The system incorporates relevant signal processing techniques for slow speed CM which include noise removal techniques to enhance the signal-to-noise and peak-holding down sampling to reduce the burden of massive data handling. The analysis software works under Labview environment, which enables online remote control of data acquisition, real-time analysis, offline analysis and diagnostic trending. The system has been fully implemented on a site machine and contributing significantly to improve the maintenance efficiency and provide a safer and reliable operation.

Human-body shadowing effects on indoor MIMO-OFDM channels at 5.2 GHz

Pedestrian movement is known to cause significant effects on indoor MIMO channels. In this paper, a statistical characterization of the indoor MIMO-OFDM channel subject ot pedestrian movement is reported. The experiment used 4 sending and 4 receiving antennas and 114 sub-carriers at 5.2 GHz. Measurement scenarios varied from zero to ten pedestrians walking randomly between transmitter (tx) and receiver (Rx) arrays. The empirical cumulative distribution function (CDF) of the received fading envelope fits the Ricean distribution with K factors ranging from 7dB to 15 dB, for the 10 pedestrians and vacant scenarios respectively. In general, as the number of pedestrians increase, the CDF slope tends to decrease proportionally. Furthermore, as the number of pedestrians increase, increasing multipath contribution, the dynamic range of channel capacity increases proportionally. These results are consistent with measurement results obtained in controlled scenarios for a fixed narrowband Single-Input Single-Output (SISO) link at 5.2 GHz in previous work. The described empirical characterization provides an insight into the prediction of human-body shadowing effects for indoor MIMO-OFDM channels at 5.2 GHz.

Children re-read and re-write their neighborhoods : critical literacies and identity work

This chapter considers the complex literate repertoires of 21st century children in multicultural primary classrooms in Adelaide South Australia. It draws on the curricular and pedagogical work of two experienced primary school teachers who explore culture, race and class, by positioning children as textual producers across a variety of media. In particular we discuss two child-authored texts – A is for Arndale – a local alphabet book co-authored by children aged between eight and ten, and – Cooking Afghani Style - a magazine style film produced by a multi-aged class of children (aged eight to thirteen) recently arrived in Australia. In the process of making these texts, primary children engaged in reading as a cultural practice – re-reading and re-writing their neighbourhoods and identities (both individual and collective). This involved frequent excursions to local key sites, both familiar and unfamiliar to the children. They investigated how diverse children experienced and lived their lives in particular places within changing communities.

Critical literacies in place : teachers who work for just and sustainable communities

This chapter draws upon theories of social justice, critical literacy and place-based pedagogies and two research projects to discuss how teachers are working ethically and creatively towards a sustainable and just society in their place(s).

Test and evaluation system for multi-protocol sampled value protection schemes

Proposed transmission smart grids will use a digital platform for the automation of substations operating at voltage levels of 110 kV and above. The IEC 61850 series of standards, released in parts over the last ten years, provide a specification for substation communications networks and systems. These standards, along with IEEE Std 1588-2008 Precision Time Protocol version 2 (PTPv2) for precision timing, are recommended by the both IEC Smart Grid Strategy Group and the NIST Framework and Roadmap for Smart Grid Interoperability Standards for substation automation. IEC 61850-8-1 and IEC 61850-9-2 provide an inter-operable solution to support multi-vendor digital process bus solutions, allowing for the removal of potentially lethal voltages and damaging currents from substation control rooms, a reduction in the amount of cabling required in substations, and facilitates the adoption of non-conventional instrument transformers (NCITs). IEC 61850, PTPv2 and Ethernet are three complementary protocol families that together define the future of sampled value digital process connections for smart substation automation. This paper describes a specific test and evaluation system that uses real time simulation, protection relays, PTPv2 time clocks and artificial network impairment that is being used to investigate technical impediments to the adoption of SV process bus systems by transmission utilities. Knowing the limits of a digital process bus, especially when sampled values and NCITs are included, will enable utilities to make informed decisions regarding the adoption of this technology.

The relative impact of work-related stress, life stress and driving environment stress on driving outcomes

Previous research has shown the association between stress and crash involvement. The impact of stress on road safety may also be mediated by behaviours including cognitive lapses, errors, and intentional traffic violations. This study aimed to provide a further understanding of the impact that stress from different sources may have upon driving behaviour and road safety. It is asserted that both stress extraneous to the driving environment and stress directly elicited by driving must be considered part of a dynamic system that may have a negative impact on driving behaviours. Two hundred and forty-seven public sector employees from Queensland, Australia, completed self-report measures examining demographics, subjective work-related stress, daily hassles, and aspects of general mental health. Additionally, the Driver Behaviour Questionnaire (DBQ) and the Driver Stress Inventory (DSI) were administered. All participants drove for work purposes regularly, however the study did not specifically focus on full-time professional drivers. Confirmatory factor analysis of the predictor variables revealed three factors: DSI negative affect; DSI risk taking; and extraneous influences (daily hassles, work-related stress, and general mental health). Moderate intercorrelations were found between each of these factors confirming the ‘spillover’ effect. That is, driver stress is reciprocally related to stress in other domains including work and domestic life. Structural equation modelling (SEM) showed that the DSI negative affect factor influenced both lapses and errors, whereas the DSI risk-taking factor was the strongest influence on violations. The SEMs also confirmed that daily hassles extraneous to the driving environment may influence DBQ lapses and violations independently. Accordingly, interventions may be developed to increase driver awareness of the dangers of excessive emotional responses to both driving events and daily hassles (e.g. driving fast to ‘blow off steam’ after an argument). They may also train more effective strategies for self-regulation of emotion and coping when encountering stressful situations on the road.

Assurance of learning : the role of work integrated learning and industry partners

In the partnering with students and industry it is important for universities to recognize and value the nature of knowledge and learning that emanates from work integrated learning experiences is different to formal university based learning. Learning is not a by-product of work rather learning is fundamental to engaging in work practice. Work integrated learning experiences provide unique opportunities for students to integrate theory and practice through the solving of real world problems. This paper reports findings to date of a project that sought to identify key issues and practices faced by academics, industry partners and students engaged in the provision and experience of work integrated learning within an undergraduate creative industries program at a major metropolitan university. In this paper, those findings are focused on some of the particular qualities and issues related to the assessment of learning at and through the work integrated experience. The findings suggest that the assessment strategies needed to better value the knowledges and practices of the Creative Industries. The paper also makes recommendations about how industry partners might best contribute to the assessment of students’ developing capabilities and to continuous reflection on courses and the assurance of learning agenda.

Work integrated learning : an industry partners’ perspective

In recent years the Australian tertiary education sector may be said to be undergoing a vocational transformation. Vocationalism, that is, an emphasis on learning directed at work related outcomes is increasingly shaping the nature of tertiary education. This paper reports some findings to date of a project that seeks to identify the key issues faced by students, industry and university partners engaged in the provision of WIL within an undergraduate program offered by the Creative Industries faculty of a major metropolitan university. Here, those findings are focussed on some of the motivations and concerns of the industry partners who make their workplaces available for student internships. Businesses are not universities and do not perceive of themselves as primarily learning institutions. However, their perspectives of work integrated learning and their contributions to it need to understand more fully at practical and conceptual levels of learning provision. This paper and the findings presented here suggest that the diversity of industry partner motivations and concerns contributing to WIL provision requires that universities understand and appreciate those partners as contributors with them to a culture of learning provision and support. These industry partner contribution need to be understood as valuing work as learning, not work as something that needs to be integrated with learning to make that learning more authentic and thereby more vocational.

Young people’s aspirations for education, work, family and leisure

Young people are arguably facing more ‘complex and contested’ transitions to adulthood and an increasing array of ‘non-linear’ paths. Education and training have been extended, identity is increasingly shaped through leisure and consumerism and youth must navigate their life trajectories in highly individualised ways. The study utilises 819 short essays compiled by students aged 14–16 years from 19 schools in Australia. It examines how young people understand their own unique positions and the possibilities open to them through their aspirations and future orientations to employment and family life. These young people do not anticipate postponing work identities, but rather embrace post-school options such as gaining qualifications, work experience and achieving financial security. Boys expected a distant involvement in family life secondary to participation in paid work. In contrast, around half the girls simultaneously expected a future involving primary care-giving and an autonomous, independent career, suggesting attempts to remake gendered inequalities

Gender influences on the work-related stress-coping process

The increasing incidence of occupational stress is recognized as a global phenomenon that is having a detrimental impact on both individuals and organizations. This study aims to identify whether men and women adopt different stress and coping processes when subjected to stress in a work context. A total of 258 workers of various professions (males = 106, females = 152) participated in the study. Results indicated that men and women differ in their stress and coping processes, forming two very distinct groups and adopting specific process models when encountering a stressful situation at work. Limitations and implications from this study are discussed.

The work of women teachers in primary literacy education : knowing and doing

This paper provides a retrospective account of three decades of my work as a literacy educator and researcher. Taking key insights from feminist sociologist, Dorothy Smith, including women’s standpoint, the everyday world as problematic, institutional capture, a sociology for the people, I revisit my research on literacy, poverty and schooling. I argue that understanding better the effects of what we do in educational institutions, through collaborative research with teachers, can lead us to generate positive alternative equity-driven practices.