The Combined Pedicled Anterolateral Thigh and Vastus Lateralis Flap as Filler for Complex Perineal Defects.

Extensive defects of the pelvis and genitoperineal region are a reconstructive challenge. We discuss a consecutive series of 25 reconstructions with the pedicled anterolateral thigh (ALT) flap including muscle part of the vastus lateralis (VL) in 23 patients from October 1999 to September 2012.Only surface defects larger than 100 cm and reconstructions by composite ALT + VL were included in this retrospective analysis. Of the 23 patients, 19 underwent oncologic resection, whereas 4 cases presented Fournier gangrene. Three patients did not reach 6 months of follow-up and were excluded from further data analysis. Among the remaining 20 patients (22 reconstructions), average follow-up period was 14 months (range, 10-18 months). Patient's average age was 60 years. Average size of the defect was 182 cm.Postoperative complications included 1 (4.5%) flap necrosis out of 22 raised flaps, 1 partial flap necrosis after venous congestion, and 2 cases where a complementary reconstructive procedure was performed due to remaining defect or partial flap failure. In 6 cases, peripheral wound dehiscence (27%) was treated by debridement followed by split-thickness skin graft or advancement local flaps. Defect size was significantly related to postoperative complications and increased hospital stay, especially in those patients who underwent preoperative radiotherapy. At the end of the follow-up period, a long-term and satisfactory coverage was obtained in all patients without functional deficits.This consecutive series of composite ALT + VL flap shows that, in case of extended defects, the flap provides an excellent and adjustable muscle mass, is reliable with minimal donor-site morbidity, and can even be designed as a sensate flap.

Landslide detection and monitoring capability of boat-based mobile laser scanning along Dieppe coastal cliffs, Normandy

Integrated in a wide research assessing destabilizing and triggering factors to model cliff dynamic along the Dieppe's shoreline in High Normandy, this study aims at testing boat-based mobile LiDAR capabilities by scanning 3D point clouds of the unstable coastal cliffs. Two acquisition campaigns were performed in September 2012 and September 2013, scanning (1) a 30-km-long shoreline and (2) the same test cliffs in different environmental conditions and device settings. The potentials of collected data for 3D modelling, change detection and landslide monitoring were afterward assessed. By scanning during favourable meteorological and marine conditions and close to the coast, mobile LiDAR devices are able to quickly scan a long shoreline with median point spacing up to 10cm. The acquired data are then sufficiently detailed to map geomorphological features smaller than 0.5m2. Furthermore, our capability to detect rockfalls and erosion deposits (>m3) is confirmed, since using the classical approach of computing differences between sequential acquisitions reveals many cliff collapses between Pourville and Quiberville and only sparse changes between Dieppe and Belleville-sur-Mer. These different change rates result from different rockfall susceptibilities. Finally, we also confirmed the capability of the boat-based mobile LiDAR technique to monitor single large changes, characterizing the Dieppe landslide geometry with two main active scarps, retrogression up to 40m and about 100,000m3 of eroded materials.

Exploring Brain Inhibition and Facilitation by Transcranial Magnetic Stimulation

Background and Question Paired-pulse TMS (Transcranial Magnetic Stimulation) paradigms allow explore motor cortex physiology. The Triple Stimulation Technique (TST) improves conventional TMS in quantifying cortico-spinal conduction. The objective of our study was to compare both methods in paired-pulse paradigms of inhibition and of facilitation. Method We investigated paired pulse paradigms of 2 ms (short intra-cortical inhibition) and of 10 ms intervals (intra cortical facilitation) in a randomized order in 22 healthy subjects applying conventional TMS and the TST protocol. Results Paired-pulse paradigms by both TMS and the TST yielded comparable results of short intra- cortical inhibition and intra cortical facilitation. However, the coefficient of variation was significantly smaller for SICI paradigm using TST. Conclusion These results suggest no greater sensitivity of the TST for quantifying inhibition and facilitation. The utility of TST to better quantify the individual amount of inhibition in SICI paradigms and its clinical utility need further studies.

Technology Catching-up and the Role of Institutions

The aim of the paper is to investigate the role played by differences in Institutional Quality on the process of technology catch-up across countries. Empirical evidence shows how countries endowed with better institutions are those experiencing higher TFP growth rates, faster rates of technology adoption and hence being those more rapidly closing the gap with the frontier. Conversely, countries lacking some minimum institutional level are shown to diverge in the long run and not to catch-up. Some institutions, however, play an ambiguous role in the creation and adoption of technology. We find that the tightening of Intellectual Property Rights reduces the ability of followers to freely imitate technology slowing down their catchup rate. This negative effect is stronger the farther the countriesare found from the frontier. Other institutional categories such as openness to trade, instead, benefit both leaders and followers.

Assessment of Coastal Bird Populations and Habitats on the Finnish Coast of the Baltic Sea: Implications for Monitoring and Management

Coastal birds are an integral part of coastal ecosystems, which nowadays are subject to severe environmental pressures. Effective measures for the management and conservation of seabirds and their habitats call for insight into their population processes and the factors affecting their distribution and abundance. Central to national and international management and conservation measures is the availability of accurate data and information on bird populations, as well as on environmental trends and on measures taken to solve environmental problems. In this thesis I address different aspects of the occurrence, abundance, population trends and breeding success of waterbirds breeding on the Finnish coast of the Baltic Sea, and discuss the implications of the results for seabird monitoring, management and conservation. In addition, I assess the position and prospects of coastal bird monitoring data, in the processing and dissemination of biodiversity data and information in accordance with the Convention on Biological Diversity (CBD) and other national and international commitments. I show that important factors for seabird habitat selection are island area and elevation, water depth, shore openness, and the composition of island cover habitats. Habitat preferences are species-specific, with certain similarities within species groups. The occurrence of the colonial Arctic Tern (Sterna paradisaea) is partly affected by different habitat characteristics than its abundance. Using long-term bird monitoring data, I show that eutrophication and winter severity have reduced the populations of several Finnish seabird species. A major demographic factor through which environmental changes influence bird populations is breeding success. Breeding success can function as a more rapid indicator of sublethal environmental impacts than population trends, particularly for long-lived and slowbreeding species, and should therefore be included in coastal bird monitoring schemes. Among my target species, local breeding success can be shown to affect the populations of the Mallard (Anas platyrhynchos), the Eider (Somateria mollissima) and the Goosander (Mergus merganser) after a time lag corresponding to their species-specific recruitment age. For some of the target species, the number of individuals in late summer can be used as an easier and more cost-effective indicator of breeding success than brood counts. My results highlight that the interpretation and application of habitat and population studies require solid background knowledge of the ecology of the target species. In addition, the special characteristics of coastal birds, their habitats, and coastal bird monitoring data have to be considered in the assessment of their distribution and population trends. According to the results, the relationships between the occurrence, abundance and population trends of coastal birds and environmental factors can be quantitatively assessed using multivariate modelling and model selection. Spatial data sets widely available in Finland can be utilised in the calculation of several variables that are relevant to the habitat selection of Finnish coastal species. Concerning some habitat characteristics field work is still required, due to a lack of remotely sensed data or the low resolution of readily available data in relation to the fine scale of the habitat patches in the archipelago. While long-term data sets exist for water quality and weather, the lack of data concerning for instance the food resources of birds hampers more detailed studies of environmental effects on bird populations. Intensive studies of coastal bird species in different archipelago areas should be encouraged. The provision and free delivery of high-quality coastal data concerning bird populations and their habitats would greatly increase the capability of ecological modelling, as well as the management and conservation of coastal environments and communities. International initiatives that promote open spatial data infrastructures and sharing are therefore highly regarded. To function effectively, international information networks, such as the biodiversity Clearing House Mechanism (CHM) under the CBD, need to be rooted at regional and local levels. Attention should also be paid to the processing of data for higher levels of the information hierarchy, so that data are synthesized and developed into high-quality knowledge applicable to management and conservation.

Kansainväliset yrityskaupat ja osakkeenomistajan hyvinvointi lyhyellä sekä pitkällä aikavälillä: Empiirinen tutkimus Suomen osakemarkkinoilta.

Tämän tutkielman tarkoituksena on selvittää luovatko kansainväliset yrityskaupat lisäarvoa osakkeenomistajille lyhyellä ja pitkällä aikavälillä. Lisäksi tarkastellaan onnistuneen kansainvälisen yrityskaupan taustalla vaikuttavia tekijöitä niin ostajan, kohdeyrityksen, markkina-alueen kuin yhdentymisprosessinkin näkökulmista. Tutkimusmenetelmänä lyhyen aikavälin lisäarvon mittaamisessa käytetään tapahtumatutkimusta ja pitkän aikavälin lisäarvon mittaamisessa buy and hold -menetelmää. Tutkimusaineiston muodostavat suomalaisten yritysten toteuttamat kansainväliset yrityskaupat vuosina 1993–2002. Tutkimuksessa tarkastellaan yritysjoukkoa, jossa yrityskaupat ovat suuntautuneet Suomen bruttokansantuotteen kannalta tärkeimpiin vientimaihin. Empiiristen tulosten perusteella kansainväliset yrityskaupat luovat osakkeenomistajille lisäarvoa lyhyellä aikavälillä, mutta pitkällä aikavälillä kansainväliset yrityskaupat vaikuttavat negatiivisesti osakkeenomistajien hyvinvointiin.

Competence Development and Capacity Building of Sawmill Enterprises in Kenya – A Human Resources Development Approach

The Kenyan forestry and sawmilling industry have been subject to a changing environment since 1999 when the industrial forest plantations were closed down. This has lowered raw material supply and it has affected and reduced the sawmill operations and the viability of the sawmill enterprises. The capacity of the 276 registered sawmills is not sufficient to fulfill sawn timber demand in Kenya. This is because of the technological degradation and lack of a qualified labor force, which were caused because of non-existent sawmilling education and further training in Kenya. Lack of competent sawmill workers has led to low raw material recovery, under utilization of resources and loss of employment. The objective of the work was to suggest models, methods and approaches for the competence and capacity development of the Kenyan sawmilling industry, sawmills and their workers. A nationwide field survey, interviews, questionnaire and literature review was used for data collection to find out the sawmills’ competence development areas and to suggest models and methods for their capacity building. The sampling frame included 22 sawmills that represented 72,5% of all the registered sawmills in Kenya. The results confirmed that the sawmills’ technological level was backwards, productivity low, raw material recovery unacceptable and workers’ professional education low. The future challenges will be how to establish the sawmills’ capacity building and workers’ competence development. Sawmilling industry development requires various actions through new development models and approaches. Activities should be started for technological development and workers’ competence development. This requires re-starting of vocational training in sawmilling and the establishment of more effective co-operation between the sawmills and their stakeholder groups. In competence development the Enterprise Competence Management Model of Nurminen (2007) can be used, whereas the best training model and approach would be a practically oriented learning at work model in which the short courses, technical assistance and extension services would be the key functions.

Genetic diversity and species richness patterns in Baetidae (Ephemeroptera) in the Montseny Mountain range (North-East Iberian Peninsula)

This study aimed to describe patterns of diversity of Baetidae (Ephemeroptera) at the ommunity and population levels within the Montseny Mountain range (North-East Iberian Peninsula). We studied both the distribution of 4 species of baetids in 20 sites among three catchments along the altitudinal gradient (350-1700 masl); and the genetic diversity of the mtDNA cytochrome c oxidase subunit I (cox1) gene of the two common species Baetis alpinus and Baetis rhodani. We found a gradual replacement of the dominant species along the altitudinal gradient. Baetis alpinus inhabited sites at high-altitudes, and this species was replaced by B. rhodani when the altitude decreased. Baetis melanonyx and Alainites muticus attained low abundance at all river sections, and no clear altitudinal trend appeared. Our hypothesis at the population level was that genetic structuring is associated with geographic distance and limited by drainage boundaries among the three studied catchments because of the short-time dispersion of adults. Unexpectedly, analyses of molecular variance (AMOVA) and isolation-bydistance (IBD) showed genetic diversity was unstructured by distance for both species, which may be explained by the relatively short spatial scale studied and small topographic barriers among the three catchments. The Generalized Mixed Yule-Coalescent (GMYC) model showed that B. rhodani had two differentiated genetic lineages that co-occurred in all sites. Overall, diversity of baetids was structured at the community level along the altitudinal gradient, whereas it was unstructured at the population level within the Montseny Mountain range.

Genetic diversity and species richness patterns in Baetidae (Ephemeroptera) in the Montseny Mountain range (North-East Iberian Peninsula)

This study aimed to describe patterns of diversity of Baetidae (Ephemeroptera) at the ommunity and population levels within the Montseny Mountain range (North-East Iberian Peninsula). We studied both the distribution of 4 species of baetids in 20 sites among three catchments along the altitudinal gradient (350-1700 masl); and the genetic diversity of the mtDNA cytochrome c oxidase subunit I (cox1) gene of the two common species Baetis alpinus and Baetis rhodani. We found a gradual replacement of the dominant species along the altitudinal gradient. Baetis alpinus inhabited sites at high-altitudes, and this species was replaced by B. rhodani when the altitude decreased. Baetis melanonyx and Alainites muticus attained low abundance at all river sections, and no clear altitudinal trend appeared. Our hypothesis at the population level was that genetic structuring is associated with geographic distance and limited by drainage boundaries among the three studied catchments because of the short-time dispersion of adults. Unexpectedly, analyses of molecular variance (AMOVA) and isolation-bydistance (IBD) showed genetic diversity was unstructured by distance for both species, which may be explained by the relatively short spatial scale studied and small topographic barriers among the three catchments. The Generalized Mixed Yule-Coalescent (GMYC) model showed that B. rhodani had two differentiated genetic lineages that co-occurred in all sites. Overall, diversity of baetids was structured at the community level along the altitudinal gradient, whereas it was unstructured at the population level within the Montseny Mountain range.

20 Myr of eccentricity paced lacustrine cycles in the Cenozoic Ebro Basin

Long-period orbital forcing is a crucial component of the major global climate shifts during the Cenozoic as revealed in marine pelagic records. A complementary regional perspective of climate change can be assessed from internally drained lake basins, which are directly affected by insolation and precipitation balance. The Ebro Basin in northeastern Iberia embraces a 20 Myr long continuous sedimentary record where recurrent expansions and retractions of the central lacustrine system suggest periodic shifts of water balance due to orbital oscillations. In order to test climatic (orbital) forcing a key-piece of the basin, the Los Monegros lacustrine system, has been analyzed in detail. The cyclostratigraphic analysis points to orbital eccentricity as pacemaker of short to long-term lacustrine sequences, and reveals a correlation of maxima of the 100-kyr, 400-kyr and 2.4-Myr eccentricity cycles with periods of lake expansion. A magnetostratigraphy-based chronostratigraphy of the complete continental record allows further assessing long-period orbital forcing at basin scale, a view that challenges alternate scenarios where the stratigraphic architecture in foreland systems is preferably associated to tectonic processes. We conclude that while the location of lacustrine depocenters reacted to the long-term tectonic-driven accommodation changes, shorter wavelenght oscillations of lake environments, still million-year scale, claims for a dominance of orbital forcing. We suggest a decoupling between (tectonic) supply-driven clastic sequences fed from basin margins and (climatic) base level-driven lacustrine sequences in active settings with medium to large sediment transfer systems.

Welding of Sheet metal using Modified short arc MIG/MAG welding process

In this research work, the results of an investigation dealing with welding of sheet metals with diverse air gap using FastROOT modified short arc welding method and short circuit MAG welding processes have been presented. Welding runs were made under different conditions and, during each run, the different process parameters were continuously monitored. It was found that maximum welding speed and less HAZ are reached under specific welding conditions with FastROOT method with the emphasis on arc stability. Welding results show that modified short arc exhibits a higher electrode melting coefficient and with virtually spatter free droplet transition. By adjusting the short circuit duration the penetration can be controlled with only a small change in electrode deposition. Furthermore, by mixing pulsed MIG welding with modified arc welding the working envelope of the process is greatly extended allowing thicker material sections to be welded with improved weld bead aesthetics. FastROOT is a modified short arc welding process using mechanized or automated welding process based on dip transfer welding, characterized by controlled material deposition during the short circuit of the wire electrode to the workpiece.

O inacreditável emprego de produtos químicos perigosos no passado

This work describes an overview of the use of chemicals in several commercial applications along the XXth century. The use of chemicals by men was largely empirical for many centuries, since there was no organized chemical and toxicological knowledge. During the XIXth century the chemical industry gained a crucial role in the development of technology, as evidenced by the extraordinary increase of new products and their incorporation into everyday life. Chemistry was considered a science capable of solving any problem, little regard being paid to the consequences of the widespread use of new chemicals. Efficiency was more important than safety and consumer information. From tragedies and the development of knowledge on toxicology men adopted more careful protocols before a new chemical was proposed for use. Modern life could not exist without the large-scale employment of a variety of chemicals but information on their responsible and conscious use is now essential. Products that were once considered the "last word in technology" have eventually proven dangerous to humans and the environment in the short or long time range. Previous knowledge on the toxicological dangers and the properties of a given substance or product before commercialization is necessary for safe handling.

Menestyksekkäät yliopistopelin pelaajat? Tutkimus nopeasti ja nuorena valmistumisesta

Succestul players of the university game? A study about the short duration of master’s degree studies and graduating at a young age The duration of studies has long been a topic of conversation. It was first mentioned in 1883, but the discussion has been quite active and topical for the last fifty years. During that time, there have been numerous committees, working groups for the Ministry of Education, and revisions to the structure of the master’s degree program. All of these have focused on lowering the duration of studies as well as the age at which students graduate. These two factors have been regarded as indicators of efficiency. Achieving these goals is seen to promote the successful transition from studies to work. In addition, the greater time that people spend working is thought to help with the fiscal burden of an aging population. The reasons for prolonged study seem to be: students working during the course of their studies; the actual workload of the studies, which sometimes does not correlate with the calculated workload; problems with the students’ course selections and with their financial support from the government; issues in teaching; and problems with university funding. This study focuses on students’ study experiences, their progress, and the university itself. Of particular interest was the students’ use of different resources—cultural, social, and economical capital. Participants in the study had graduated from the University of Turku between the years of 1999 and 2001 and were divided into two groups: prompt graduates, those who graduated among the fastest 18th percent in their faculty; and those who graduated at a slower pace. A survey (N=499) and interviews (N=69) were among the methods used, along with a compilation of statistics on the students’ duration of studies, the number of modules studied, and marks obtained. Bourdieu’s theory about fields and the games people play in those fields formed the theoretical background of this study. The university was seen to form a playing field with historically and politically changeable rules. The students playing in this field were considered to possess different economical, social, and cultural resources, which they use more or less successfully. Some of the strategies used by students result in gra¬duating at a young age and/or a short duration of study; some do not. This study divided the age of graduation and the duration of study into separate games. This allowed the study to determine the relationship between these two factors and to examine their similarities and differences. The study also focused on the idea of success. Short duration of studies and a young graduation age can be considered, be some, an indication of success in navigating the university field. This study aimed to see if this concept held true or whether these seeming indicators of success have negative side effects. The main result of this study is that, even though the games of duration and age have similarities, they are sufficiently diverse to be considered separate games, which need different resources. To graduate with a short duration of studies, it is important for a student to successfully view and navigate the university field, tailoring one’s studies and extracurricular activities to suit the individual. In the game of youth, the background of the student seemed to be of greater importance. The youngest graduates had spent more time with their parents, who also had higher educational qualifications. They also had higher achievement in their previous studies. This seems to indicate that their background allowed them to assimilate a better understanding of the school and university fields and that playing the university game was natural for them. As for the aspect of success, it seems that there are many ways to define the term. Youth on graduation and short duration of studies can be seen as two indicators of success. Both revealed negative and positive outcomes, even though short duration of studies seemed more often to be connected with positive outcomes. However, it seems that the best indicator for success is the way in which students organize study into their lives to support and suit their needs and abilities to realize a meaningful life and a successful entry into the field of work.

Development of Russian Ports in The Gulf of Finland

Russia has been one of the fastest developing economic areas in the world. Based on the GDP, the Russian economy grew evenly since the crisis in 1998 up till 2008. The growth in the gross domestic product has annually been some 5–10%. In 2007, the growth reached 8.1%, which is the highest figure after the 10% growth in 2000. Due to the growth of the economy and wage levels, purchasing power and consumption have been strongly increasing. The growing consumption has especially increased the imports of durables, such as passenger cars, domestic appliances and electronics. The Russian ports and infrastructure have not been able to satisfy the growing needs of exports and imports, which is why quite a large share of Russian foreign trade is going through third countries as transit transports. Finnish ports play a major role in transit transports to and from Russia. About 15% of the total value of Russian imports was transported through Finland in 2008. The economic recession that started in autumn 2008 and continues to date has had an impact on the economic development of Russia. The export income has decreased, mainly due to the reduced world market prices of energy products (oil and gas) and raw minerals. Investments have been postponed, getting credit is more difficult than before, and the ruble has weakened in relation to the euro and the dollar. The imports are decreasing remarkably, and are not forecast to reach the 2008 volumes even in 2012. The economic crisis is reflected in Finland's transit traffic. The volume of goods transported through Finland to and from Russia has decreased almost in the same proportion as the imports of goods to Russia. The biggest risk threatening the development of the Russian economy over long term is its dependence on export income from oil, gas, metals, minerals and forest products, as well as the trends of the world market prices of these products. Nevertheless, it is expected that the GDP of Russia will start to grow again in the forthcoming years due to the increased demand for energy products and raw minerals in the world. At the same time, it is obvious that the world market prices of these products will go up with the increasing demand. The increased income from exports will lead to a growth of imports, especially those of consumer goods, as the living standard of Russian citizens rises. The forecasts produced by the Russian Government concerning the economic development of Russia up till 2030 also indicate a shift in exported goods from raw materials to processed products, which together with energy products will become the main export goods of Russia. As a consequence, Russia may need export routes through third countries, which can be seen as an opportunity for increased transit transports through the ports of Finland. The ports competing with the ports of Finland for Russian foreign trade traffic are the Russian Baltic Sea ports and the ports of the Baltic countries. The strongest competitors are the Baltic Sea ports handling containers. On the Russian Baltic Sea, these ports include Saint Petersburg, Kaliningrad and, in the near future, the ports of Ust-Luga and possibly Vyborg. There are plans to develop Ust-Luga and Vyborg as modern container ports, which would become serious competitors to the Finnish ports. Russia is aiming to redirect as large a share as possible of foreign trade traffic to its own ports. The ports of Russia and the infrastructure associated with them are under constant development. On the other hand, the logistic capacity of Russia is not able to satisfy the continually growing needs of the Russian foreign trade. The capacity problem is emphasized by a structural incompatibility between the exports and imports in the Russian foreign trade. Russian exports can only use a small part of the containers brought in with imports. Problems are also caused by the difficult ice conditions and narrow waterways leading to the ports. It is predicted that Finland will maintain its position as a transit route for the Russian foreign trade, at least in the near future. The Russian foreign trade is increasing, and Russia will not be able to develop its ports in proportion with the increasing foreign trade. With the development of port capacity, cargo flows through the ports of Russia will grow. Structural changes in transit traffic are already visible. Firms are more and more relocating their production to Russia, for example as regards the assembly of cars and warehousing services. Simultaneously, an increasing part of transit cargoes are sent directly to Russia without unloading and reloading in Finland. New product groups have nevertheless been transported through Finland (textile products and tools), replacing the lost cargos. The global recession that started in autumn 2008 has influenced the volume of Russian imports and, consequently, the transit volumes of Finland, but the recession is not expected to be of long duration, and will thus only have a short-term impact on transit volumes. The Finnish infrastructure and services offered by the logistic chain should also be ready to react to the changes in imported product groups as well as to the change in Russian export products in the future. If the development plans of the Russian economy are realized, export products will be more refined, and the share of energy and raw material products will decrease. The other notable factor to be taken into consideration is the extremely fast-changing business environment in Russia. Operators in the logistic chain should be flexible enough to adapt to all kinds of changes to capitalise on business opportunities offered by the Russian foreign trade for the companies and for the transit volumes of Finnish ports, also in the future.

Energy harvesting methods for wireless sensor nodes in heavy-duty vehicles

The number of autonomous wireless sensor and control nodes has been increasing rapidly during the last decade. Until recently, these wireless nodes have been powered with batteries, which have lead to a short life cycle and high maintenance need. Due to these battery-related problems, new energy sources have been studied to power wireless nodes. One solution is energy harvesting, i.e. extracting energy from the ambient environment. Energy harvesting can provide a long-lasting power source for sensor nodes, with no need for maintenance. In this thesis, various energy harvesting technologies are studied whilst focusing on the theory of each technology and the state-of-the-art solutions of published studies and commercial solutions. In addition to energy harvesting, energy storage and energy management solutions are also studied as a subsystem of a whole energy source solution. Wireless nodes are also used in heavy-duty vehicles. Therefore a reliable, long-lasting and maintenance-free power source is also needed in this kind of environment. A forestry harvester has been used as a case study to study the feasibility of energy harvesting in a forestry harvester’s sliding boom. The energy harvester should be able to produce few milliwatts to power the target system, an independent limit switch.