The "Catching up" Process of Manufacturing in East Asia

This paper examines the "catching up" process of manufacturing in East Asia within the framework of North and South location. Results of this study indicate that latecomers of the ASEAN Four and China have advanced the "catching up" process. At the same time, second-runners of the Asian NIES have more extensively increased their "catching up" with Japan. Most "catching up" was realized in a very short period in the 1990s, and the advancement of the "catching up" process has moved into various industries from nondurable products to light machinery products. However, it has not yet advanced in heavy machinery such as in the industrial machinery and machine tool industries.

The Evolution of the "One China" Concept in the Process of Taiwan's Democratization

This paper investigates how Taiwan's "one China" concept evolved during the democratization process that occurred under the leadership of former President Lee Teng-hui. The author argues that there was a crucial evolution of the "one China" concept and that the transformation of the concept resulted from changes in Taiwan's internal political circumstances. The evolution of the concept creates a real possibility that the "status quo" sought by the ROC in the Taiwan Strait both during and after the Cold War might be destroyed. In addition, any further evolution of the "one China" concept will surely make the "status quo" of Taiwan untenable, in that it would induce Taiwan to seek de jure instead of de facto independence, possibly initiating a conflict between the PRC and the ROC. To prevent such a conflict in the Taiwan Strait, the international community must persuade the ROC not to go beyond the "status quo" and to stay within the framework of de facto independence. At the same time, both the PRC and the ROC should be urged to maintain an open conduit of communication for productive talks on the reunification of China.

Changes in the foreign trade structure of the Russian Far East under the process of transition toward a market economy

Under the process of transition toward a market economy, the economic connections of the Russian Far East (RFE) with external regions changed from a division of labor among the regions of the USSR (Russia) to an international division of labor. This happened due to factors including the liberalization of the trade system away from a state monopoly, the presence of rich natural resources and of developed industries related to these resources, the advantage of geographically proximity to Asia-Pacific countries, and the political and economic division of the once unified national economic space during the process of transition. The economic connections of RFE with external economies changed radically under the transition toward the market economy. First, the value of foreign trade increased dramatically and the importance of foreign trade for the RFE economy increased enormously. Second, however, different territories of RFE traveled along different trajectories, due to factors involving their industrial structure and geographical conditions. Third, in recent years connections with China, in the areas of both exports and imports, have grown. Fourth, the share within exports of "fuel, mineral resources and metal" increased radically from the end of the 1990s, and the share of "machine, facilities and transportation means" increased from 2002 year within imports. Under this situation, especially since 2002, there has been a major change in the structure of foreign trade.

Increasing popular participation in the treaty-making process : the legislative process of Section 190 of the 2007 Constitution of Thailand

Historically, the authority to conclude international treaties was exclusively exercised by administrative bodies (or the chief of state). However, recent studies pointed out that the present legislative bodies have come to play a more active role through ratification or the review of treaties in European and American countries. Harrington (2005) studied judicial reform in British dominions and criticized the past executive-dominant treaty-making process as a “democratic deficit” due to a fear that under this system the nation might be bound by international agreements for which a consensus had not been obtained. These studies indicated that people’s participation in the treaty-making process has increased on a global basis, but neither of them provides sufficient descriptive evidence regarding why and how such procedures were established. The present paper therefore attempts to solve these questions by analyzing the legislative and political process of the treaty-making procedure reform in Thailand’s 2007 constitution as a case study.

The innovation process of a privately-owned enterprise and a state-owned enterprise in China

This study compares the innovation process of a privately-owned enterprise and a state-owned enterprise in China using their patent data. Huawei and ZTE were selected for this study because they experienced the same historical environment in the same industry from the same region in China leaving their owner types as their critical difference. This study investigates the difference in the innovation process in R&D between a privately-owned and a state-owned enterprise by analyzing (1) domestic and international patent application pattern, (2) co-application and co-applicants, (3) knowledge accumulation inside Huawei and ZTE, and (4) knowledge spillover to domestic and foreign firms.

Usability Planner: A Tool to Support the Process of Selecting Usability Methods

There is increasing pressure on developers to produce usable systems, which requires the use of appropriate methods to support user centred design during development. There is currently no consistent advice on which methods are appropriate in which circumstances, so the selection of methods relies on individual experience and expertise. Considerable effort is required to collate information from various sources and to understand the applicability of each method in a particular situation. Usability Planner is a tool aimed to support the selection of the most appropriate methods depending on project and organizational constraints. Many of the rules employed are derived from ISO standards, complemented with rules from the authors’ experience.

'Enhancement of the crystallization process of TbxFe1-x thin films upon the formation of alpha-Tb phase'

TbxFe1−x thin films deposited by sputtering on Mo were investigated structurally and magnetically. The microstructure consists of TbFe2 nanoparticles embedded in an amorphous matrix, and the Tb content can be correlated with an increase in the volume of these nanoparticles. Similar microstructure and behavior were found when TbFe2 was deposited on glass and on a Pt buffer layer. Nevertheless, thermal treatments promote a different effect, depending on the mechanical stiffness of the buffer layer. The layers deposited on Mo, a rigid material, show crystalline TbFe2 together with α-Tb phase upon thermal treatment. In contrast, TbFe2 does not crystallize properly on Pt, a material with a lower stiffness than Mo. Intermediate results were observed on the film deposited on glass. Experimental results show the impact of the buffer stiffness on the crystallization process. Moreover, the formation of α-Tb appears to be fundamental to crystallized TbFe2 on layers deposited on rigid buffers

In situ acoustic methods to estimate the physical and mechanical aging of oriented strand board

Following the success achieved in previous research projects usin non-destructive methods to estimate the physical and mechanical aging of particle and fibre boards, this paper studies the relationships between aging, physical and mechanical changes, using non-destructive measurements of oriented strand board (OSB). 184 pieces of OSB board from a French source were tested to analyze its actual physical and mechanical properties. The same properties were estimated using acoustic non-destructive methods (ultrasound and stress wave velocity) during a physical laboratory aging test. Measurements were recorded of propagation wave velocity with the sensors aligned, edge to edge, and forming an angle of 45 degrees, with both sensors on the same face of the board. This is because aligned measures are not possible on site. The velocity results are always higher in 45 degree measurements. Given the results of statistical analysis, it can be concluded that there is a strong relationship between acoustic measurements and the decline in physical and mechanical properties of the panels due to aging. The authors propose several models to estimate the physical and mechanical properties of board, as well as their degree of aging. The best results are obtained using ultrasound, although the difference in comparison with the stress wave method is not very significant. A reliable prediction of the degree of deterioration (aging) of board is presented.

Fabrication process of Mo/Au TES at RT

We report on the fabrication details of TES based on Mo/Au bilayers. The Mo layer is deposited by radio frequency (RF) sputtering and capped with a sputter deposited thin Au protection layer. Afterwards, a second Au layer of suitable (lower) resistivity is deposited ex‐situ by e‐beam evaporation, until completion of the total desired Au thickness. The deposition was performed at room temperature (RT) on LPCVD Si3 N4 membranes. Such a deposition procedure is very reproducible and allow controlling the critical temperature (Tc) and normal electrical resistance (RN ) of the Mo/Au bilayer. The process is optimized to achieve low stress bilayers, thus avoiding the undesirable curvature of the membranes. Bilayers are patterned using photolithographic techniques and wet etching procedures. Mo superconducting paths are used to contact the Mo/Au bilayers, thus ensuring good electrical conductivity and thermal isolation. The entire fabrication process let to stable and reproducible sensors with required and tunable functional properties

Concept of project: learning lessons

The concept of Project encompasses a semantic disparity that involves all areas of professional and nonprofessional activity. In the engineering projects domain, and starting by the etymological roots of the terms, a review of the definitions given by different authors and their relation with sociological trends of the last decades is carried out. The engineering projects began as a tool for the development of technological ideas and have been improved with legal, economic and management parameters and recently with environmental aspects. However, the engineering projects involve people, groups, agents, organizations, companies and institutions. Nowadays, the social implications of projects are taken into consideration but the technology for social integration is not consolidated. This communication provides a new framework based on the experience for the development of engineering projects in the context of "human development", placing people in the center of the project

Process of Expropriation of Buildings for the Construction of the New Dock of the Port of Cartagena (Spain) in the 18th Century

The need of the Bourbon monarchy to build a Naval Base in the Bay of Cartagena (Spain) during the eighteenth century, implied performing various actions on the environment which allowed the construction of the new dock. One of the priority actions was the transformation of the watershed of the streams that flowed into Mandaraches´s sea. For this reason, a dike was designed and constructed in the northern part of the city. The design of this great work, which was designed as a fortification of the city, was subject to considerable uncertainties. Its proximity to the city involved the demolition of several buildings in the San Roque´s neighborhood. The greater or lesser number of affected buildings and the value of the just indemnification for the expropriation of them, become decisive factors to determine if the work was viable for the Royal Estate or not.

Sentence selection for improving the tuning process of a statistical machine translation system

Este artículo describe una estrategia de selección de frases para hacer el ajuste de un sistema de traducción estadístico basado en el decodificador Moses que traduce del español al inglés. En este trabajo proponemos dos posibilidades para realizar esta selección de las frases del corpus de validación que más se parecen a las frases que queremos traducir (frases de test en lengua origen). Con esta selección podemos obtener unos mejores pesos de los modelos para emplearlos después en el proceso de traducción y, por tanto, mejorar los resultados. Concretamente, con el método de selección basado en la medida de similitud propuesta en este artículo, mejoramos la medida BLEU del 27,17% con el corpus de validación completo al 27,27% seleccionando las frases para el ajuste. Estos resultados se acercan a los del experimento ORACLE: se utilizan las mismas frases de test para hacer el ajuste de los pesos. En este caso, el BLEU obtenido es de 27,51%.