Licitações sustentáveis: um estudo sobre a aplicação do decreto nº 7.746/2012 na contratação de serviços pela Universidade Federal do Espírito Santo – UFES

Este estudo objetiva analisar o tema Licitações Sustentáveis, as quais se destinam a integrar preocupações ambientais e sociais às aquisições públicas, no contexto do debate e da busca pela sustentabilidade. Foi realizado um estudo de caso para investigar como a Prefeitura Universitária da Universidade Federal do Espírito Santo (PU/UFES) está operacionalizando e lidando com a obrigatoriedade de adoção das licitações sustentáveis nas contratações de serviços efetuadas, considerando o período de 2010 a 2013. O principal intuito desta pesquisa foi identificar se essas contratações estão em harmonia com as diretrizes de sustentabilidade vigentes nas legislações nacionais, a partir da Instrução Normativa MPOG nº 01/2010 e, sobretudo, no que se refere ao Decreto nº 7.746/2012 e seus desdobramentos posteriores. Com isso, objetivou-se também apontar dificuldades operacionais e propor um Plano de Intervenção para melhorar a implementação de critérios sustentáveis nas referidas contratações. Em relação à metodologia utilizada, os métodos empregados foram o dedutivo e o estudo de caso. A pesquisa foi aplicada - quanto à natureza; qualitativa – quanto à forma de abordagem; descritiva e exploratória – quanto ao objetivo geral; e bibliográfica/documental – quanto aos procedimentos técnicos. O questionário/formulário e a entrevista semiestruturada foram os instrumentos utilizados para a coleta de dados. Os resultados da análise do estudo de caso realizado na PU/UFES revelam que apenas menos de um terço dos editais investigados apresentam critérios de sustentabilidade. As principais causas encontradas se dividem na falta de conhecimento dos atores envolvidos e na ausência de interesses, iniciativas e colaboração de setores relacionados. Com isso, o trabalho aponta para a necessidade de avanços em direção ao cumprimento das obrigações legais em vigor e à promoção da sustentabilidade nas contratações licitadas.

Hibridizando o ensino de inglês na Escola de Aprendizes- Marinheiros do Espírito Santo

Esta pesquisa teve por objetivo avaliar o desempenho em inglês como L2 de alunos submetidos a atividades em uma abordagem híbrida com o uso de ferramentas da internet na Escola de Aprendizes-Marinheiros do Espírito Santo. Quarenta alunos de duas turmas intactas foram divididos em dois grupos, o experimental (ensino tradicional + ambiente virtual) e o controle (ensino tradicional apenas). O referencial teórico revisou a literatura sobre a abordagem de ensino de línguas estrangeiras baseada em tarefas, metodologias híbridas de ensino de L2, multiletramentos e novas tecnologias. A metodologia de pesquisa usada foi mista com dados qualitativos e quantitativos. O estudo avaliou o impacto de atividades on-line na aprendizagem de L2 e no desenvolvimento da autonomia e do letramento digital. Três tarefas usando variados sítios da internet foram administradas ao grupo experimental, seguidas de um questionário para cada uma, usado para a avaliação qualitativa. A análise quantitativa foi feita por meio de pré e pós-testes analisados estatisticamente. Para esta pesquisa-ação, foram utilizados questionários, entrevistas semiestruturadas e o diário da professora-pesquisadora como instrumentos de coleta de dados. De forma geral, os resultados não mostraram ganhos estatisticamente significativos no tratamento, porém a análise qualitativa das impressões dos alunos-participantes sobre as tarefas realizadas revelou que a abordagem híbrida de ensino de L2 pode ajudar os alunos a desenvolver a autonomia, motivação, um maior contato com a língua-alvo e o letramento digital.

Propagação vegetativa de porta-enxertos de pereira por estacas semi-lenhosas

Pesquisou-se a viabilidade técnica da propagação vegetativa dos porta-enxertos de pereira 'Taiwan Nashi-C', 'Taiwan Mamenashi' (Pyrus calleryana Dcne.) e 'Seleção IAC-1' (Pyrus spp.), por estacas semi-lenhosas. O experimento foi conduzido em telado equipado com sistema de nebulização intermitente, pertencente ao Núcleo de Pesquisa e Desenvolvimento do Jardim Botânico, do Instituto Agronômico (IAC), em Campinas, Estado de São Paulo. Adotou-se o fatorial 3 x 4 (porta-enxertos x doses de ácido indolbutírico), com cinco repetições de 20 estacas, em delineamento inteiramente casualizado. Com os resultados obtidos aos 60 dias após a estaquia, conclui-se que: a) é tecnicamente possível a propagação dos porta-enxertos 'Taiwan Nashi-C', 'Taiwan Mamenashi' e 'Seleção IAC-1' por estacas semi-lenhosas; b) dentre os porta-enxertos pesquisados, 'Taiwan Nashi-C' apresenta a maior porcentagem de enraizamento, a menor porcentagem de estacas com calo, além do maior comprimento de raízes e número de raízes por estaca; c) é necessário o uso de ácido indolbutírico para o enraizamento de estacas semi-lenhosas desses porta-enxertos, sendo que, no conjunto das variáveis analisadas, as concentrações de 4.000 mg.L-1 e de 6.000 mg.L-1 proporcionam os maiores benefícios ao enraizamento adventício; d) as concentrações de ácido indolbutírico testadas não são fitotóxicas às estacas semi-lenhosas dos genótipos pesquisados.

Mechanical Behavior of the Lamellar Structure in Semi-Crystalline Polymers

We have employed molecular dynamics simulations to study the behavior of virtual polymeric materials under an applied uniaxial tensile load. Through computer simulations, one can obtain experimentally inaccessible information about phenomena taking place at the molecular and microscopic levels. Not only can the global material response be monitored and characterized along time, but the response of macromolecular chains can be followed independently if desired. The computer-generated materials were created by emulating the step-wise polymerization, resulting in self-avoiding chains in 3D with controlled degree of orientation along a certain axis. These materials represent a simplified model of the lamellar structure of semi-crystalline polymers,being comprised of an amorphous region surrounded by two crystalline lamellar regions. For the simulations, a series of materials were created, varying i) the lamella thickness, ii) the amorphous region thickness, iii) the preferential chain orientation, and iv) the degree of packing of the amorphous region. Simulation results indicate that the lamella thickness has the strongest influence on the mechanical properties of the lamella-amorphous structure, which is in agreement with experimental data. The other morphological parameters also affect the mechanical response, but to a smaller degree. This research follows previous simulation work on the crack formation and propagation phenomena, deformation mechanisms at the nanoscale, and the influence of the loading conditions on the material response. Computer simulations can improve the fundamental understanding about the phenomena responsible for the behavior of polymeric materials, and will eventually lead to the design of knowledge-based materials with improved properties.

Contrasts in the basins of attraction of structurally identical iterative root finding methods

A numerical comparison is performed between three methods of third order with the same structure, namely BSC, Halley’s and Euler–Chebyshev’s methods. As the behavior of an iterative method applied to a nonlinear equation can be highly sensitive to the starting points, the numerical comparison is carried out, allowing for complex starting points and for complex roots, on the basins of attraction in the complex plane. Several examples of algebraic and transcendental equations are presented.

Combining Formal Methods and Functional Strategies Regarding the Reverse Engineering of Interactive Applications

Abstract. Graphical user interfaces (GUIs) make software easy to use by providing the user with visual controls. Therefore, correctness of GUI’s code is essential to the correct execution of the overall software. Models can help in the evaluation of interactive applications by allowing designers to concentrate on its more important aspects. This paper describes our approach to reverse engineer an abstract model of a user interface directly from the GUI’s legacy code. We also present results from a case study. These results are encouraging and give evidence that the goal of reverse engineering user interfaces can be met with more work on this technique.

Methods to classify maize cultivars in use efficiency and response to nitrogen

n plant breeding programs that aim to obtain cultivars with nitrogen (N) use efficiency, the focus is on methods of selection and experimental procedures that present low cost, fast response, high repeatability, and can be applied to a large number of cultivars. Thus, the objectives of this study were to classify maize cultivars regarding their use efficiency and response to N in a breeding program, and to validate the methodology with contrasting doses of the nutrient. The experimental design was a randomized block with the treatments arranged in a split-plot scheme with three replicates and five N doses (0, 30, 60, 120 and 200 kg ha-1) in the plots, and six cultivars in subplots. We compared a method examining the efficiency and response (ER) with two contrasting doses of N. After that, the analysis of variance, mean comparison and regression analysis were performed. In conclusion, the method of the use efficiency and response based on two N levels classifies the cultivars in the same way as the regression analysis, and it is appropriate in plant breeding routine. Thus, it is necessary to identify the levels of N required to discriminate maize cultivars in conditions of low and high N availability in plant breeding programs that aim to obtain efficient and responsive cultivars. Moreover, the analysis of the interaction genotype x environment at experiments with contrasting doses is always required, even when the interaction is not significant.

Comparison of different methods for the determination of total organic carbon and humic substances in Brazilian soils

ABSTRACTAiming to compare three different methods for the determination of organic carbon (OC) in the soil and fractions of humic substances, seventeen Brazilian soil samples of different classes and textures were evaluated. Amounts of OC in the soil samples and the humic fractions were measured by the dichromate-oxidation method, with and without external heating in a digestion block at 130 °C for 30 min; by the loss-on-ignition method at 450 °C during 5 h and at 600 °C during 6 h; and by the dry combustion method. Dry combustion was used as reference in order to measure the efficiency of the other methods. Soil OC measured by the dichromate-oxidation method with external heating had the highest efficiency and the best results comparing to the reference method. When external heating was not used, the mean recovery efficiency dropped to 71%. The amount of OC was overestimated by the loss-on-ignition methods. Regression equations obtained between total OC contents of the reference method and those of the other methods showed relatively good adjustment, but all intercepts were different from zero (p < 0.01), which suggests that more accuracy can be obtained using not one single correction factor, but considering also the intercept. The Walkley-Black method underestimated the OC contents of the humic fractions, which was associated with the partial oxidation of the humin fraction. Better results were obtained when external heating was used. For the organic matter fractions, the OC in the humic and fulvic acid fractions can be determined without external heating if the reference method is not available, but the humin fraction requires the external heating.

Impacts of vinasse and methods of sugarcane harvesting on the availability of K and carbon stock of an Argisol

ABSTRACT Soils of tropical regions are more weathered and in need of conservation managements to maintain and improve the quality of its components. The objective of this study was to evaluate the availability of K, the organic matter content and the stock of total carbon of an Argisol after vinasse application and manual and mechanized harvesting of burnt and raw sugarcane, in western São Paulo.The data collection was done in the 2012/2013 harvest, in a bioenergy company in Presidente Prudente/SP. The research was arranged out following a split-plot scheme in a 5x5 factorial design, characterized by four management systems: without vinasse application and harvest without burning; with vinasse application and harvest without burning; with vinasse application and harvest after burning; without vinasse application and harvest after burning; plus native forest, and five soil sampling depths (0-10 10-20, 20-30, 30-40, 40-50 cm), with four replications. In each treatment, the K content in the soil and accumulated in the remaining dry biomass in the area, the levels of organic matter, organic carbon and soil carbon stock were determined. The mean values were compared by Tukey test. The vinasse application associated with the harvest without burning increased the K content in soil layers up to 40 cm deep. The managements without vinasse application and manual harvest after burning, and without vinasse application with mechanical harvesting without burning did not increase the levels of organic matter, organic carbon and stock of total soil organic carbon, while the vinasse application and harvest after burning and without burning increased the levels of these attributes in the depth of 0-10 cm.

Comparison of methods for classification of the coefficient of variation in papaya

ABSTRACT The objective of this work was to study the distribution of values of the coefficient of variation (CV) in the experiments of papaya crop (Carica papaya L.) by proposing ranges to guide researchers in their evaluation for different characters in the field. The data used in this study were obtained by bibliographical review in Brazilian journals, dissertations and thesis. This study considered the following characters: diameter of the stalk, insertion height of the first fruit, plant height, number of fruits per plant, fruit biomass, fruit length, equatorial diameter of the fruit, pulp thickness, fruit firmness, soluble solids and internal cavity diameter, from which, value ranges were obtained for the CV values for each character, based on the methodology proposed by Garcia, Costa and by the standard classification of Pimentel-Gomes. The results obtained in this study indicated that ranges of CV values were different among various characters, presenting a large variation, which justifies the necessity of using specific evaluation range for each character. In addition, the use of classification ranges obtained from methodology of Costa is recommended.

Semi-automatic 3D Segmentation Of Costal Cartilage In CT Data From Pectus Excavatum Patients

One of the current frontiers in the clinical management of Pectus Excavatum (PE) patients is the prediction of the surgical outcome prior to the intervention. This can be done through computerized simulation of the Nuss procedure, which requires an anatomically correct representation of the costal cartilage. To this end, we take advantage of the costal cartilage tubular structure to detect it through multi-scale vesselness filtering. This information is then used in an interactive 2D initialization procedure which uses anatomical maximum intensity projections of 3D vesselness feature images to efficiently initialize the 3D segmentation process. We identify the cartilage tissue centerlines in these projected 2D images using a livewire approach. We finally refine the 3D cartilage surface through region-based sparse field level-sets. We have tested the proposed algorithm in 6 noncontrast CT datasets from PE patients. A good segmentation performance was found against reference manual contouring, with an average Dice coefficient of 0.75±0.04 and an average mean surface distance of 1.69±0.30mm. The proposed method requires roughly 1 minute for the interactive initialization step, which can positively contribute to an extended use of this tool in clinical practice, since current manual delineation of the costal cartilage can take up to an hour.

Processo de trabalho e grupos semi-autônomos: a evolução da experiência sueca de Kalmar aos anos 90

Este trabalho visa a apresentar o desenvolvimento recente de novas formas de organização da produção e do trabalho na Suécia, em especial no que se refere ao setor automotivo (ônibus, caminhões e automóveis). Apresentam-se em detalhes as características da mais recente planta do grupo Volvo, denominada Uddevalla, projetada segundo o conceito de dock-assembly. É introduzida também uma discussão sucinta acerca de semelhanças e diferenças entre esse caso e outros como, por exemplo, o da planta da Toyota no Japão. Por fim, procurase reforçar a importância da consideração de soluções novas - e adaptadas - ao caso brasileiro, no que diz respeito a formas de organização do trabalho que contribuam para aumento da produtividade (em um sentido amplo) dos sistemas de produção.

A JOINT EXPERIMENTAL ANALYSIS OF INVESTOR BEHAVIOR IN IPO PRICING METHODS

This article jointly examines the differences of laboratory versions of the Dutch clock open auction, a sealed-bid auction to represent book building, and a two-stage sealed bid auction to proxy for the “competitive IPO”, a recent innovation used in a few European equity initial public offerings. We investigate pricing, seller allocation, and buyer welfare allocation efficiency and conclude that the book building emulation seems to be as price efficient as the Dutch auction, even after investor learning, whereas the competitive IPO is not price efficient, regardless of learning. The competitive IPO is the most seller allocative efficient method because it maximizes offer proceeds. The Dutch auction emerges as the most buyer welfare allocative efficient method. Underwriters are probably seeking pricing efficiency rather than seller or buyer welfare allocative efficiency and their discretionary pricing and allocation must be important since book building is prominent worldwide.