Efeito da compactação do solo no desenvolvimento aéreo e radicular de cultivares de milho

O objetivo deste trabalho foi avaliar o desenvolvimento aéreo e radicular de duas cultivares de milho (Zea mays L.), em solo submetido a quatro níveis de compactação. Utilizou-se um Latossolo Vermelho-Escuro distroférrico de textura média, em vasos montados com anéis de PVC sobrepostos, com diâmetro interno de 14,5 cm e altura de 35 cm. Os níveis de compactação utilizados em subsuperfície foram caracterizados pelas densidades do solo de 1,28, 1,42, 1,56 e 1,69 Mg m³. As cultivares de milho foram o híbrido AG-5011 e a variedade Sol da Manhã. Aos 40 dias após a emergência das plantas, determinaram-se as massas da matéria seca da parte aérea e das raízes, a densidade do comprimento radicular e o diâmetro médio radicular. A compactação do solo comprometeu o desenvolvimento das plantas de milho híbrido e da variedade na mesma intensidade. Apesar de alterar a distribuição do sistema radicular ao longo do perfil do solo, o impedimento físico em subsuperfície não diminuiu a produção total de raízes de milho. O diâmetro médio radicular apresentou alta correlação com o crescimento de raízes no solo compactado. O sistema radicular do milho não é capaz de romper uma camada compactada de solo com resistência mecânica da ordem de 1,4 MPa.

Estudo da secagem do feijão verde (Vigna unguiculata L. Walp) - análise experimental do processo combinado leito fixo/leito de jorro

Green bean is considered as one of most traditional Brazilian Northeast dishes. Green beans drying preliminary experiments show that combine processes, fixed-bed/spouted bed, resulted in dehydrated beans with uniform humidity and the recovery of the beans properties after their rehydration. From this assays was defined an initial humidity suited for the spouted bed process. A fixed-bed pre-drying process until a level of 40% humidity gave the best results. The spouted bed characteristic hydrodynamic curves were presented for different beans loads, where changes in the respective beans physical properties were evidenced during the fluidynamic assay, due simultaneous drying process. One 22 factorial experimental design was carried out with three repetition in the central point, considering as entry variables: drying air velocity and temperature. The response variables were the beans brakeage, water fraction evaporated during 20 and 50 minutes of drying and the humidity ratio. They are presented still the modeling of the drying of the green beans in fine layer in the drier of tray and the modeling of the shrinking of the beans of the drying processes fixed-bed and spouted bed

Estudo da secagem do pedúnculo do caju em sistemas convencional e solar: modelagem e simulação do processo

This work aims to study the drying of cashew-nut pulp with different lay-out of dryers using conventional and solar energy. It concerns with the use of exceeding of the regional raw material and the suitable knowledge for the applicability of the drying systems as pathway for food conservation. Besides, it used renewable sources as solar energy to dry these agroindustrial products. Runs were carried out using a conventional tray-dryer with temperature, air velocity control and cashew slice thickness of 55°C, 65°C, 75°C; 3.0; 4.5, 6.0 m s-1; 1.0; 1.5 and 2.0 cm, respectively, in order to compare the studied systems. To evaluate the conventional tray-dryer, it was used a diffusional model of 2nd Fick´s law, where the drying curves were quite well fitted to an infinite flat plate design. For the drying runs where the room temperature had no control, it was developed a phenomenological-mathematical model for the solar dryer with indirect radiation under natural and forced convection based on material and energy balances of the system. Besides, it was carried out assays in the in natura as well as dehydrated, statistic analysis of the experimental drying data, sensorial analysis of the final dry product and a simplified economical analysis of the systems studied

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Viabilidade técnica de uma rota não convencional para a produção de leite de cabra em pó em cooperativas do Rio Grande do Norte

Nowadays, Brazil has both the greatest goat herd and the greatest goat milk production of South America. The state of Rio Grande do Norte, located in northeast of Brazil, has an average year production of three thousand cubic meters of goat milk in natura. Part of this milk production is homemade and it comes from small farms, which unite in rural cooperatives created to encourage the production and implementation of industrial processes for preservation and processing of milk. Results presented by literature and obtained from preliminary essays in this thesis show that non conventional dryer of spouted bed with inert particles is able to produce powder milk from in natura milk (cattle or goat), with the same quality of spray dryer, however, operating at low cost. The method of drying in spouted bed consists of injecting milk emulsion on the bed of inert particles gushed by hot air. This emulsion covers the particles with a thin film, which dries and is reduced to powder during the circulation of inerts inside the bed. The powder is dragged by exhaustion air and separated in the cyclone. The friction among particles resulted from the particles circulation, encourages high taxes of shear in the thin film of emulsion, breaking the cohesive forces and making this process possible. Studying the drying process and the powder goat milk production in one unit of spouted bed with inert particles, seeing the development of a low cost technological route for powder milk production is the aim of this thesis. The powder milk produced by this route must attend the local demand of food industries which need an intermediate product to be used as a food ingredient (ice-cream, milk candy). In order to reach this aim, this thesis approaches the aspects related to physical, thermodynamics and physic-chemicals characteristics of goat milk, whose complete data are still inexistent in the literature. The properties of materials are of great importance to the project of any process which involves the operations of transportation of movement, heat and mass quantity, such as the dryers which operate in fluid dynamically active regime, like the spouted bed. It was obtained new data related to the goat milk properties in function of concentration of solids and temperature. It is also important to mention the study developed about the kinetic of solids retention in the bed of inert particles during the drying of goat milk. It was found more adequate processes conditions to the proposed technological route to be implemented in small and micro-industries, with simplifications in the system of milk injection as well as in the form of operation of the dryer. Important data were obtained for a posterior stage of this research which involves the v modeling, simulation, control and optimization of the process. The results obtained in this thesis, in relation to process performance as well as to the quality of produced powder milk validate the proposal of using the spouted bed dryer in the production of powder goat milk

Produção de forragem verde em sistema hidropônico usando esgoto tratado

In the urban areas of the cities a larger problem of destiny of effluents of the treatment stations is verified due to the junction of the sewages in great volumes. This way the hidroponic cultive becomes important, for your intensive characteristic, as alternative of reuse. This work presents as objective the improvement of the relation hidric-nutritious of the hidroponic cultive of green forage (FVH) using treaty sewage. The production of forage was with corn (Zea mays L.), using double hybrid AG1051, in the experimental field of the Federal University of Rio Grande do Norte (UFRN), in the city of Natal-RN-Brazil. The treated effluent essentially domestic had origin of anaerobic reactor, type decant-digester of two cameras in series followed by anaerobic filters drowned. The hidroponic experimental system was composed of 08 stonemasons, with limited contours for masonry of drained ceramic brick, measuring each one 2,5 meters in length for 1,0 meter of width, with inclination of 4% (m/m) in the longitudinal sense, leveled carefully, in way to not to allow preferential roads in the flow. These dimensions, the useful area of Isow was of 2 square meters. The stonemasons of cultive were waterproof (found and lateral) with plastic canvas of 200 micres of thickness, in the white color. Controlled the entrance and exit of the effluente in the stonemasons, with cycles of 12,68 minutes, it being water of 1,18 minutes. The treatments were constituted of: T1 - 24 hours/day under it waters with flow of 2 L/min; T2 - 12 hours/day under waters with flow of 4 L/min; T3 - 12 hours/day under waters with flow of 2 L/min; and T4 - 16 hours/day under waters with flow of 3 L/min. There were evaluations of the evapotranspirometric demand, of hidroponic system affluent and effluent seeking to characterize and to monitor physical-chemical parameters as: pH, temperature, Electric Conductivity and Fecal Coliforms. This last one was analyzed to the 11 days after isow (DAS) and to the 14 DAS. The others were analyzed daily. I sow it was accomplished in the dates of February 21, 2007, first experiment, and April 10, 2007, second experiment. The density of Isow was of 2 kg of seeds, germinated before 48 hours, for square meter of stonemason. The statistic delineament was it casual entirely with two repetitions, in two experiments. It was applied Tukey test of average to five percent of probability. The cultivation cycle was of 14 DAS with evapotranspirometric demand maximum, reached by T1, of 67,44 mm/day. The analyzed parameters, as mass of green matter - Kg, productivity-Kg/m2 and reason of production of seed FVH/Kg used in Isow, the best result was presented by T1, obtaining value of up to 19,01 Kg/m2 of cultive. Without significant difference, the T4 presented greats values with 16 hours under cycle of water. The Treatments 2 and 3 with 12 hours under cycle of water, they obtained inferior results to the other Treatments. As treatment system, came efficient in the reduction of the salinity. T1 obtained reduction medium maxim of 62,5%, to the 7 DAS, in the amount of salts that enter in the system in they are absorbed in the cultivation. The cultivation FVH acted reducing the microbiologic load. Significant percentile of reduction they were reached, with up to 90,23% of reduction of Units of Colonies (UFC), constituting, like this, the Hidroponic System as good alternative of treatment of effluents of Reactors of high Efficiency

Eficiência de uma ETE em escala real composta por reator UASB seguido de lodo ativado

In the state of Rio Grande do Norte (RN), Brazil, there are about 80 sewage treatment systems being the predominant technology waste stabilization ponds. The Baldo s WWTP , due to its location and low availability of area, was designed as a hybrid conventional system (UASB reactor followed by activated sludge with biodiscs) at a tertiary level, being the most advanced WWTP in the State and also with the larger treatment capacity (1620 m3/h) .The paper presents the results of its performance based on samples collections from May to December 2012. Composite samples of the effluent of the grit chamber, UASB reactors, anoxic chambers, aeration tanks and treated effluent were collected weekly, every 4 hours for 24 hours. The results showed that the WWTP effluent presented adequate ranges of temperatures, pH and DO, however removal efficiencies of BOD and TSS were below the predicted by design. The UASB reactors also showed removals of BOD and TSS less than expected, due to the accumulation of sludge in the reactors, which eventually, was washed out in the effluent. The nitrification process was not satisfactory mainly due to problems in the oxygen distribution in the aeration tanks. The removal of ammonia and TKN were high, probably by the assimilation process

Imagens da morte: um estudo do gênero policial-fantástico em Poe, Wilde e Christie

The mirror has always been related to different symbols, usually connected to self-knowledge and truth. This is due to the fact that this object shows whoever looks oneself in it an image as close to reality as it is possible. On the other hand, the mirror is also associated to mysticism and to the supernatural for it can magically duplicate one who looks into it. This ambiguous characteristic turns the mirror into an element that is fantastic in itself and places it in the central position of our discussion. Therefore, in this study, we analyze the texts In a Glass Darkly, by Agatha Christie, The Oval Portrait, by Edgar Allan Poe, and The Picture of Dorian Gray, by Oscar Wilde, giving special attention to the study of the images and artificial representations of men: the mirror, as an ephemeral representation; and the portrait, as an attempt to eternize an ephemeral image. We also discuss themes such as jealousy, the double, and death in the several forms in which it appears in the texts: suicides, homicides, attempted murders, death in life (mourning, separation, and developmental phases) all of which are, somehow, related to the specular representations. The narrative resource of using a mirror to introduce the supernatural event, along with the theme of death in all the narratives we have studied, and the difficulty to place these texts within the pre-established genres led us to categorize them as being part of a hybrid genre that presents characteristics both of the fantastic and of the detective story which we have named fantastic-detective story

O ritual simbólico do Ctrl+C (copiar ) e Ctrl+V (colar) no ensino médio

Nowadays, technology has a direct influence on the relationship student and teacher have with language. The internet is a powerful tool in helping work with the language and, through it, the knowledge comes to the student easily and intensely. Furthermore, this facility has enhanced and made visible what has been called, within the University community, "plagiarism generation." This work assumes that this generation has, in their written texts, symbolic movements similar to those of "copy and paste" applied to research work carried out by high school students. Taking this as starting point, this dissertation aims to analyze how high school students of the 1st year from a school in Natal (RN) construct texts, under the movements known as "Ctrl + c" and "Ctrl + v", with reference to the text of the "other". More specific issues are behind the general objective, namely: 1. how the student appropriates the source-text when he copies and pastes? 2. What are the categories of analysis that allow us to look analytically and theoretically for the "ctrl + c / ctrl + v" practice made by the student? 2. how the studies developed in the fields of "Genetic Criticism" (Grésillon, 1987), the "school manuscripts" (Calil, 2004) and "paraphrase" (Fuchs, 1982) may help in working with writing in the classroom standing as a possible way to minimize the copy and paste effects in the students texts? Thus, we observe the categories of analysis that allow us to look, theoretically and analytically, for the symbolic ritual of the "ctrl + c" (copy) and "ctrl + v" (paste) in high school. Our study shows that the student text is a "hybrid body" whose writing is a drawing entanglement because of the presence of the foreign text, verbatim, and the presence of linguistic elements to paraphrase the original text.This textual embodiment has, behind it, certain operations, namely: replacing, moving, adding and deleting statements. Given the specificity of the data and the research objectives, this study aligns with qualitative research methods (SILVERMAN, 2009) and falls within the knowledge field of Applied Linguistics, which is characterized especially by investigating problems, phenomena in which language in a real situation is taken as central (BRUMFIT, 1995).Theoretically, our work follows the approach of studies on the paraphrase (Fuchs, 1982, 1994a, 1994b; DAUNAY, 1997, 1999, 2002a, 2002b), the studies developed in the field of Genetic Criticism (Grésillon, 1987, 1994, 1992, 2008 ) and those developed by Eduardo Calil (2004) on "school manuscripts"

Prospecção e caracterização de genes associados ao processo de indução floral em cana-de-açúcar

The northeastern region is responsible to 14.32% of sugarcane national production. This lowered contribution is due to edaphoclimatic condition. Flowering is a vital process to plant which consumes lots of energy and it culminates in a process called isoporization. This one can give in a decreasing of 60% on alcohol and water production. It may consider that cropped sugarcane has a hibrid with octaploid genome, there are varieties with a flowering standard until of non flowering. Using this natural genetic potential on different croppings of sugarcane, the aim of this work was to understand as this process occurs by the usage of subtractive approaches. The total RNA was extracted using Trizol of peaks of merisematics of croppings with induced flowering and other with late flowering. From this total RNA were built four subtractives libraries (B1- induced early flowering subtracted on late flowering not induced; B2- late flowering not induced subtracted induced early flowering; B3- induced early flowering subtracted of not induced early flowering; B02- not induced early flowering subtracted from induced early flowering) using kits Super Smart cDNA synthesis and BD Clontech kit select cDNA subtraction (Clontech). This material was clone don vector pGEM T-easy(Promega) and changed in competent cells of E.coli DH10B. Given analysis sequence was carried out a program BLASTn against database of NCBI and genome of Arabidopsis thaliana, rice and maize. Clones were grouped in 9 different classes according to function. Some factors already related as couples of flower induction were identified at different libraries. And grouped proteins with cell cycle and it controls were presents, mainly kinases proteins. Related factors to proteic sinthesis, metabolism, defence, cell communication were also given in both libraries .Some identified genes did not show similarity on database or homology with hypothesis function, and it can represents new genes to be deposited in international database. These results offers that some identified on sugarcane, classified as on factors classes, cell cycle and cell communication, trough unknown genes, can be linked with genetic changing to the flowering process found in the northeastern region

Desempenho de híbridos de milho em diferentes arranjos espaciais de plantas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Evaluation of hybrid models for static and multistage transmission system planning

Neste trabalho é analisada a aplicação de algoritmos heurísticos para o Modelo Híbrido Linear - Hybrid Linear Model (HLM) - no problema de planejamento da expansão de sistemas de transmissão. O HLM é um modelo relaxado que ainda não foi suficientemente explorado. Assim, é realizada uma análise das características do modelo matemático e das técnicas de solução que podem ser usadas para resolver este tipo de modelo. O trabalho analisa em detalhes um algoritmo heurístico construtivo para o HLM e faz uma extensão da modelagem e da técnica de solução para o planejamento multi-estágio da expansão de sistemas de transmissão. Dentro deste contexto, também é realizada uma avaliação da qualidade das soluções encontradas pelo HLM e as possibilidades de aplicação deste modelo em planejamento de sistemas de transmissão. Finalmente, são apresentados testes com sistemas conhecidos na literatura especializada.

Síntese e caracterização de materiais nanoporosos para pirólise catalítica de óleos pesados

The present work reports the study of nanoporous structures, aiming at their use in research directed to the current demand of the petroleum industry to value heavy oil. Initially, two ways were chosen for the synthesis of porous structures from the molecular sieves of type Si-MCM-41. In the first way, the structure MCM-41 is precursory for heteroatom substitutes of silicon, generating catalyst of the type Al-MCM-41 from two different methods of incorporation of the metal. This variation of the incorporation method of Aluminum in the structure of Si-MCM-41 was carried out through the conventional procedure, where the aluminum source was incorporated to the gel of synthesis, and the procedure post-synthesis, where the Aluminum source was incorporated in catalyst after the synthesis of Si-MCM-41. In the second way, the MCM-41 acts as a support for growth of nanocrystals of zeolite embedded in their mesoporous, resulting in hybrid MCM-41/ZSM-5 catalyst. A comparative analysis was carried through characterizations by XRD, FTIR, measures of acidity through n-butylamine adsorption for TGA, SEM-XRF and N2 adsorption. Also crystalline aluminosilicate with zeolitic structure MFI of type ZSM-5 was synthesized without using organic templates. Methodologies to the preparation of these materials are related by literature using conventionally reactants that supply oxides of necessary silicon and aluminum, as well as a template agent, and in some cases co-template. The search for new routes of preparation for the ZSM-5 aimed at, above all, the optimization of the same as for the time and the temperature of synthesis, and mainly the elimination of the use of organic templates, that are material of high cost and generally very toxic. The current study is based on the use of the H2O and Na+ cations playing the role of structural template and charge compensation in the structure. Characterizations by XRD, FTIR, SEM-XRF and N2 adsorption were also conducted for this material in order to compare the samples of ZSM-5 synthesized in the absence of template and those used industrially and synthesized using structuring

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Produtividade de grãos de milho e massa seca de braquiárias em consórcio no sistema de integração lavoura-pecuária

Objetivou-se avaliar as produtividades de grãos de milho e massa seca de braquiárias em duas modalidades de consórcio em sistema de integração lavoura-pecuária no período de inverno-primavera em região do Cerrado. O experimento foi conduzido no ano de 2006, na Fazenda de Ensino, Pesquisa e Extensão (FEPE), pertencente à Faculdade de Engenharia (FE/UNESP - Campus de Ilha Solteira), localizada no município de Selvíria, MS. O delineamento experimental utilizado foi de blocos casualizados, em esquema fatorial 4x2, com cinco repetições. Os tratamentos constituíram-se de quatro espécies de braquiárias (Brachiaria brizantha cv. 'Marandu', Brachiaria decumbens, Brachiaria ruziziensis e Brachiaria híbrido cv. 'Mulato II') consorciadas na linha e a lanço no momento da semeadura do milho. Avaliaram-se os componentes da produção, a produtividade do milho, bem como a massa seca das braquiárias após a colheita do milho. As forrageiras consorciadas a lanço, com destaque para a Brachiaria ruziziensis proporcionaram menor desenvolvimento das plantas de milho e menores valores dos componentes da produção, bem como da produtividade de grãos. Apesar de satisfatórias produtividades de massa seca (acima de 2.500kg ha-1), com exceção da Brachiaria brizantha, as demais espécies consorciadas a lanço foram superiores, com destaque para a Brachiaria decumbens e a Brachiaria ruziziensis que apresentaram maior adaptabilidade e produtividade de forragem no consórcio com milho em sistema de integração lavoura-pecuária.