Quality Standards for the Delivery of Specialist Stop Smoking Services in Northern Ireland September 2011

Cigarette smoking is the major cause of preventable ill health in Northern Ireland. It accounts for 2400 premature deaths every year. Fifty percent or one in every two smokers will die prematurely due to their addiction; many will suffer chronic ill health and poor quality of life before their death (DHSSPS, 2007; ASH, 2008). Approximately 340,000 people smoke in Northern Ireland or 24% of the population over 16yrs. The Public Health Agency (PHA) commissions specialist stop smoking services across Northern Ireland. It has enabled the establishment of specialist stop smoking services in a range of settings including GP practices, pharmacies, hospitals and community settings. Tobacco control activities are overseen locally by the PHA's Tobacco Control Groups. The multi-agency groups oversee and advise on tobacco control initiatives.All stop smoking services are required to comply with the requirements of 18 standards. This report highlights the standards.

Indoor air quality in a public building following smoking bans

Introduction: Exposure to environmental tobacco smoke (ETS) is a major environmental risk factor. Indoor contaminants come from a variety of sources, which can include inadequate ventilation, volatile organic compounds (VOCs), biological agents, combustion products, and ETS. Because ETS is one of the most frequent causes of IAQ complaints as well as the high mortality of passive smoking, in June 2004 the University of Geneva made the decision to ban smoking inside the so called "Uni-Mail" building, the biggest Swiss University human science building of recent construction, and the ordinance was applied beginning in October 2004. This report presents the finding related to the IAQ of the "Uni-Mail" building before and after smoking bans using nicotine, suspended dust, condensate and PAHs level in air as tracers to perform an assessment of passive tobacco exposure for non-smokers inside the building. Methods: Respirable particles (RSP) A real time aerosol monitor (model DataRAM)was place at sampling post 1, level ground floor. Condensate It consists in extracting any organic matter taken on the glass fibre filters by MeOH, and then measuring the total absorbent of the MeOH extract to the UV wavelength of 447 nm. Nicotine Nicotine was taken by means of cartridges containing of XAD-4 to the fixed flow of 0.5 L/min. The analytical method used for the determination of nicotine is based on gas chromatography with Nitrogen selective detector GC-NPD. Results: Figure 1 shows the box plot density display of 3 parameters before and after smoking bans for all 7 sampling posts: dust, condensate and nicotine in air in μg/m3. Conclusion: Before the smoking ban, the level of the concentrations of respirable particles (RSP) is raised more, average of the day 320 μg/m3, with peaks of more than 1000 μg/m3, compared with the values of the surrounding air between 22 and 30 μg/m3. The nicotine level is definitely more important (average 5.53 μg/m3, field 1.5 to 17.9 μg/m3). Once the smoking bans inside the building were applied, one notes a clear improvement in terms of concentrations of pollutants. For dust, the concentration fell by 3 times (average: 130 μg/m3, range: 40 to 160 μg/m3) and that of nicotine by 10 times (average: 0.53 μg/m3, range: 0 to 1.69 μg/m3) compared to that found before smoking bans. The outdoor air RSP concentration was 22 μg/m3 or 10 times lower. Nicotine seems to be the best tracer for ETS free of interference, independent of location or season.

Elaboració d'un protocol basat en XML per a una xarxa de sensors

La progressiva reducció de dimensió i cost en els dispositius electrònics, la dràstica retallada de consum elèctric i la independència de què això els dota han fet créixer en els últims temps l'interès de les comunitats científiques i tecnològiques per les xarxes sense fils de petits dispositius. Per altra banda, l'XML (eXtensible Markup Language) és un metallenguatge extensible que ha esdevingut un estàndard per a l'intercanvi d'informació estructurada entre diferents plataformes. L'objectiu d'aquest treball és explorar les possibilitats que pot oferir la introducció de l'XML en les xarxes de sensors amb l'elaboració d'un protocol de comunicació basat en aquest llenguatge i demostrar la transparència en el canvi de plataforma. Per fer-ho, es disposa de dos dispositius amb capacitat de comunicació sense fils equipats amb detectors de temperatura, lluminositat, efecte Hall i nivell de càrrega de la bateria. El projecte constarà de dues parts: una, més extensa, dedicada al desenvolupament del programari per a aquests dispositius, encarregat de obtenir les lectures dels diferents sensors i emetre-les per la xarxa utilitzant el llenguatge XML, i una altra, per recollir aquesta informació present a la xarxa, interpretar-la, salvar-la en una base de dades i exposar-la al món en una plana web. El programari dels dispositius sensors s'escriurà en llenguatge nesC dins el sistema tinyOS que és el sistema operatiu que equipen. La part d'explotació de les dades es desenvoluparà sota la plataforma .NET de Microsoft.

Smoking: know the facts

This leaflet outlines the health and financial benefits of stopping smoking. It provides key facts on the health dangers associated with smoking, information on second-hand smoke, information on the dangers of smoking to babies, and contact details for help and support available. It also lists the various forms of nicotine replacement therapy (NRT) and non-nicotine medications available.This poster highlights some of the main health and financial benefits of stopping smoking. An associated A5 leaflet goes into detail on these areas.

Major influencing factors of indoor radon concentrations in Switzerland.

PURPOSE: In Switzerland, nationwide large-scale radon surveys have been conducted since the early 1980s to establish the distribution of indoor radon concentrations (IRC). The aim of this work was to study the factors influencing IRC in Switzerland using univariate analyses that take into account biases caused by spatial irregularities of sampling. METHODS: About 212,000 IRC measurements carried out in more than 136,000 dwellings were available for this study. A probability map to assess risk of exceeding an IRC of 300 Bq/m(3) was produced using basic geostatistical techniques. Univariate analyses of IRC for different variables, namely the type of radon detector, various building characteristics such as foundation type, year of construction and building type, as well as the altitude, the average outdoor temperature during measurement and the lithology, were performed comparing 95% confidence intervals among classes of each variable. Furthermore, a map showing the spatial aggregation of the number of measurements was generated for each class of variable in order to assess biases due to spatially irregular sampling. RESULTS: IRC measurements carried out with electret detectors were 35% higher than measurements performed with track detectors. Regarding building characteristics, the IRC of apartments are significantly lower than individual houses. Furthermore, buildings with concrete foundations have the lowest IRC. A significant decrease in IRC was found in buildings constructed after 1900 and again after 1970. Moreover, IRC decreases at higher outdoor temperatures. There is also a tendency to have higher IRC with altitude. Regarding lithology, carbonate rock in the Jura Mountains produces significantly higher IRC, almost by a factor of 2, than carbonate rock in the Alps. Sedimentary rock and sediment produce the lowest IRC while carbonate rock from the Jura Mountains and igneous rock produce the highest IRC. Potential biases due to spatially unbalanced sampling of measurements were identified for several influencing factors. CONCLUSIONS: Significant associations were found between IRC and all variables under study. However, we showed that the spatial distribution of samples strongly affected the relevance of those associations. Therefore, future methods to estimate local radon hazards should take the multidimensionality of the process of IRC into account.

Smoking in prisons: the need for effective and acceptable interventions.

Tobacco-smoking prevalence has been decreasing in many high-income countries, but not in prison. We provide a summary of recent data on smoking in prison (United States, Australia, and Europe), and discuss examples of implemented policies for responding to environmental tobacco smoke (ETS), their health, humanitarian, and ethical aspects. We gathered data through a systematic literature review, and added the authors' ongoing experience in the implementation of smoking policies outside and inside prisons in Australia and Europe. Detainees' smoking prevalence varies between 64 per cent and 91.8 per cent, and can be more than three times as high as in the general population. Few data are available on the prevalence of smoking in women detainees and staff. Policies vary greatly. Bans may either be 'total' or 'partial' (smoking allowed in cells or designated places). A comprehensive policy strategy to reduce ETS needs a harm minimization philosophy, and should include environmental restrictions, information, and support to detainees and staff for smoking cessation, and health staff training in smoking cessation.

Managing tobacco use: the neglected cardiovascular disease risk factor.

Cigarette smoking is a major risk factor for cardiovascular disease (CVD) and the leading avoidable cause of death worldwide. Exposure to secondhand smoke (SHS) increases the risk of CVD among non-smokers. Smoking cessation benefits all smokers, regardless of age or amount smoked. The excess risk of CVD is rapidly reversible, and stopping smoking after a myocardial infarction reduces an individual's risk of CVD mortality by 36% over 2 years. Smoking cessation is a key component of primary and secondary CVD prevention strategies, but tobacco use often receives less attention from cardiologists than other risk factors, despite the availability of proven treatments that improve smoking cessation rates. Both psychosocial counselling and pharmacotherapy are effective methods to help smokers quit, but they are most effective when used together. The first-line medications licensed to aid smoking cessation, nicotine replacement therapy, bupropion and varenicline, are effective in and appropriate for patients with CVD. An evidence-based approach for physicians is to routinely ask all patients about smoking status and SHS exposure, advise all smokers to quit and all patients to adopt smoke-free policies for their home and car, and offer all smokers in the office or hospital brief counselling, smoking cessation pharmacotherapy, and referral to local programmes where psychosocial support can be sustained in person or by telephone. Like other chronic diseases, tobacco use requires a long-term management strategy. It deserves to be managed as intensively as other CVD risk factors.

Percepción de las consecuencias del consumo de tabaco en fumadores adictos al juego

En una muestra de 34 adictos al juego en tratamiento, se examinan las características deconsumo de tabaco de los sujetos fumadores y la influencia de las consecuencias percibidas dela conducta de fumar en función de las etapas de cambio (Prochaska, DiClemente y Norcross,1992). Los resultados muestran que, aunque los porcentajes de fumadores doblan a los existentesen la población general, las personas fumadoras adictas al juego están representadas en lasdiferentes etapas de cambio con porcentajes parecidos a los de dicha población. Por otra parte,no se ha encontrado relación entre el nivel de dependencia medido con el Test de Fagerström yla etapa de cambio. En cuanto a la influencia de las consecuencias percibidas del consumo detabaco, en general los sujetos tienden a conceder mayor importancia a los perjuicios que a losbeneficios de fumar. En los análisis en función de las etapas de cambio, se encuentran diferenciassignificativas entre el grupo de los que piensan dejar de fumar en los próximos seis meses,(contempladores y preparados) y el grupo de los que no fuman (exfumadores y no fumadores) enel beneficio “fumar ayuda a relajarse” que es más valorado por los primeros. También seencuentran dichas diferencias entre los precontempladores y los que no fuman en dos perjuicios:“fumar produce a veces dolor de cabeza” y “fumar a veces provoca taquicardia” que son másvalorados por los segundos. Estos resultados sugieren la conveniencia de realizar las intervencionesmás adecuadas para cada etapa de cambio, a fin de que las personas adictas al juegopuedan también tener éxito en el abandono de la adicción al tabaco

Efectos del modelado por parte de familia y amigos en la conducta de fumar de jóvenes universitarios

El objetivo del presente trabajo es estudiar la relación entre el consumo de tabaco de familiares, pareja y amigos, y la conducta de fumar en una muestra de estudiantes universitarios (n = 122; 38,9% hombres y 61,1% mujeres). Los resultados obtenidos muestran que, en comparación con los no fumadores, los sujetos fumadores suelen tener padre y/o madre y/o amigos también fumadores mientras que no se aprecian diferencias en el caso de pareja y hermanos. Atendiendo al sexo de los sujetos, en los varones únicamente seobservan diferencias entre el estatus de consumo del sujeto y el de la madre, mientras que en las jóvenes esta diferencia se aprecia en ambos progenitores. Se constata la influencia del entorno social de manera que los fumadores suelentener a su alrededor un mayor número de familiares y amigos que también fuman

Probabilistic sonar scan matching for an AUV

This paper proposes MSISpIC, a probabilistic sonar scan matching algorithm for the localization of an autonomous underwater vehicle (AUV). The technique uses range scans gathered with a Mechanical Scanning Imaging Sonar (MSIS), the robot displacement estimated through dead-reckoning using a Doppler velocity log (DVL) and a motion reference unit (MRU). The proposed method is an extension of the pIC algorithm. An extended Kalman filter (EKF) is used to estimate the robot-path during the scan in order to reference all the range and bearing measurements as well as their uncertainty to a scan fixed frame before registering. The major contribution consists of experimentally proving that probabilistic sonar scan matching techniques have the potential to improve the DVL-based navigation. The algorithm has been tested on an AUV guided along a 600 m path within an abandoned marina underwater environment with satisfactory results

International exercise on 124Sb activity measurements.

An international exercise, registered as EUROMET project no. 907, was launched to measure both the activity of a solution of (124)Sb and the photon emission intensities of its decay. The same solution was sent by LNE-LNHB to eight participating laboratories. In order to identify possible biases, the participants were asked to use all possible activity measurement methods available in their laboratory and then to determine their reference value for comparison. Thus, measurement results from 4pibeta-gamma coincidence/anti-coincidence counting, CIEMAT/NIST liquid-scintillation counting, 4pigamma counting with well-type ionization chambers and well-type crystal detectors were given. The results are compared and show a maximum discrepancy of about 1.6%: possible explanations are proposed.

A review of sensor fusion techniques for underwater vehicle navigation

This work provides a general description of the multi sensor data fusion concept, along with a new classification of currently used sensor fusion techniques for unmanned underwater vehicles (UUV). Unlike previous proposals that focus the classification on the sensors involved in the fusion, we propose a synthetic approach that is focused on the techniques involved in the fusion and their applications in UUV navigation. We believe that our approach is better oriented towards the development of sensor fusion systems, since a sensor fusion architecture should be first of all focused on its goals and then on the fused sensors

Accuracy estimation of a new omnidirectional 3D vision sensor

We present a computer vision system that associates omnidirectional vision with structured light with the aim of obtaining depth information for a 360 degrees field of view. The approach proposed in this article combines an omnidirectional camera with a panoramic laser projector. The article shows how the sensor is modelled and its accuracy is proved by means of experimental results. The proposed sensor provides useful information for robot navigation applications, pipe inspection, 3D scene modelling etc

Overview of coded light projection techniques for automatic 3D profiling

Obtaining automatic 3D profile of objects is one of the most important issues in computer vision. With this information, a large number of applications become feasible: from visual inspection of industrial parts to 3D reconstruction of the environment for mobile robots. In order to achieve 3D data, range finders can be used. Coded structured light approach is one of the most widely used techniques to retrieve 3D information of an unknown surface. An overview of the existing techniques as well as a new classification of patterns for structured light sensors is presented. This kind of systems belong to the group of active triangulation method, which are based on projecting a light pattern and imaging the illuminated scene from one or more points of view. Since the patterns are coded, correspondences between points of the image(s) and points of the projected pattern can be easily found. Once correspondences are found, a classical triangulation strategy between camera(s) and projector device leads to the reconstruction of the surface. Advantages and constraints of the different patterns are discussed