Static tests of constructive tires using hydraulic press on the soil

ABSTRACT The power consumption and load capacity of agricultural machines have grown and the effects of pressure on the soil by tires have been still little investigated. In concern with sustainable development, the relationship machine-tire-soil must be in balance to give more consistency on the best use of tires for a given load. This study aimed to evaluate four tires of two constructive types, the bias belted tires and radial tires, both with respective rim diameters of 22.5 and 26.5 inches with variables measuring the footprint, elastic deformation, sinkage and resistance to penetration. A hydraulic press with an attachment shaft for tire mounting and a box of soil in which the tire has been imposed on a load of 53.00 kN using nominal pressures recommended by the tire manufacturer. The radial construction tire with rim diameter of 26.5 inches obtained less sinkage and resistance to penetration; however, greater elastic deformation and footprint compared to other tires. The bias-belted tire with 22.5-inch rim presented the highest resistance to penetration and the lowest elastic deformation.

Social ventures : the development of the theory of sustainable contributive advantage and initial empirical tests

This thesis attempts to fill gaps in both a theoretical basis and an operational and strategic understanding in the areas of social ventures, social entrepreneurship and nonprofit business models. This study also attempts to bridge the gap in strategic and economic theory between social and commercial ventures. More specifically, this thesis explores sustainable competitive advantage from a resource-based theory perspective and explores how it may be applied to the nonmarket situation of nonprofit organizations and social ventures. It is proposed that a social value-orientation of sustainable competitive advantage, called sustainable contributive advantage, provides a more realistic depiction of what is necessary in order for a social venture to perform better than its competitors over time. In addition to providing this realistic depiction, this research provides a substantial theoretical contribution in the area of economics, social ventures, and strategy research, specifically in regards to resource-based theory. The proposed model for sustainable contributive advantage uses resource-based theory and competitive advantage in order to be applicable to social ventures. This model proposes an explanation of a social venture’s ability to demonstrate consistently superior performance. In order to determine whether sustainable competitive advantage is in fact, appropriate to apply to both social and economic environments, quantitative analyses are conducted on a large sample of nonprofit organizations in a single industry and then compared to similar quantitative analyses conducted on commercial ventures. In comparing the trends and strategies between the two types of entities from a quantitative perspective, propositions are developed regarding a social venture’s resource utilization strategies and their possible impact on performance. Evidence is found to support the necessity of adjusting existing models in resource-based theory in order to apply them to social ventures. Additionally supported is the proposed theory of sustainable contributive advantage. The thesis concludes with recommendations for practitioners, researchers and policy makers as well as suggestions for future research paths.

Production of Mg(OH)2 from Mg-silicate rock for CO2 mineral sequestration

Sequestration of carbon dioxide in mineral rocks, also known as CO2 Capture and Mineralization (CCM), is considered to have a huge potential in stabilizing anthropogenic CO2 emissions. One of the CCM routes is the ex situ indirect gas/sold carbonation of reactive materials, such as Mg(OH)2, produced from abundantly available Mg-silicate rocks. The gas/solid carbonation method is intensively researched at Åbo Akademi University (ÅAU ), Finland because it is energetically attractive and utilizes the exothermic chemistry of Mg(OH)2 carbonation. In this thesis, a method for producing Mg(OH)2 from Mg-silicate rocks for CCM was investigated, and the process efficiency, energy and environmental impact assessed. The Mg(OH)2 process studied here was first proposed in 2008 in a Master’s Thesis by the author. At that time the process was applied to only one Mg-silicate rock (Finnish serpentinite from the Hitura nickel mine site of Finn Nickel) and the optimum process conversions, energy and environmental performance were not known. Producing Mg(OH)2 from Mg-silicate rocks involves a two-staged process of Mg extraction and Mg(OH)2 precipitation. The first stage extracts Mg and other cations by reacting pulverized serpentinite or olivine rocks with ammonium sulfate (AS) salt at 400 - 550 oC (preferably < 450 oC). In the second stage, ammonia solution reacts with the cations (extracted from the first stage after they are leached in water) to form mainly FeOOH, high purity Mg(OH)2 and aqueous (dissolved) AS. The Mg(OH)2 process described here is closed loop in nature; gaseous ammonia and water vapour are produced from the extraction stage, recovered and used as reagent for the precipitation stage. The AS reagent is thereafter recovered after the precipitation stage. The Mg extraction stage, being the conversion-determining and the most energy-intensive step of the entire CCM process chain, received a prominent attention in this study. The extraction behavior and reactivity of different rocks types (serpentinite and olivine rocks) from different locations worldwide (Australia, Finland, Lithuania, Norway and Portugal) was tested. Also, parametric evaluation was carried out to determine the optimal reaction temperature, time and chemical reagent (AS). Effects of reactor types and configuration, mixing and scale-up possibilities were also studied. The Mg(OH)2 produced can be used to convert CO2 to thermodynamically stable and environmentally benign magnesium carbonate. Therefore, the process energy and life cycle environmental performance of the ÅAU CCM technique that first produces Mg(OH)2 and the carbonates in a pressurized fluidized bed (FB) were assessed. The life cycle energy and environmental assessment approach applied in this thesis is motivated by the fact that the CCM technology should in itself offer a solution to what is both an energy and environmental problem. Results obtained in this study show that different Mg-silicate rocks react differently; olivine rocks being far less reactive than serpentinite rocks. In summary, the reactivity of Mg-silicate rocks is a function of both the chemical and physical properties of rocks. Reaction temperature and time remain important parameters to consider in process design and operation. Heat transfer properties of the reactor determine the temperature at which maximum Mg extraction is obtained. Also, an increase in reaction temperature leads to an increase in the extent of extraction, reaching a maximum yield at different temperatures depending on the reaction time. Process energy requirement for producing Mg(OH)2 from a hypothetical case of an iron-free serpentine rock is 3.62 GJ/t-CO2. This value can increase by 16 - 68% depending on the type of iron compound (FeO, Fe2O3 or Fe3O4) in the mineral. This suggests that the benefit from the potential use of FeOOH as an iron ore feedstock in iron and steelmaking should be determined by considering the energy, cost and emissions associated with the FeOOH by-product. AS recovery through crystallization is the second most energy intensive unit operation after the extraction reaction. However, the choice of mechanical vapor recompression (MVR) over the “simple evaporation” crystallization method has a potential energy savings of 15.2 GJ/t-CO2 (84 % savings). Integrating the Mg(OH)2 production method and the gas/solid carbonation process could provide up to an 25% energy offset to the CCM process energy requirements. Life cycle inventory assessment (LCIA) results show that for every ton of CO2 mineralized, the ÅAU CCM process avoids 430 - 480 kg CO2. The Mg(OH)2 process studied in this thesis has many promising features. Even at the current high energy and environmental burden, producing Mg(OH)2 from Mg-silicates can play a significant role in advancing CCM processes. However, dedicated future research and development (R&D) have potential to significantly improve the Mg(OH)2 process performance.

Quality Indicators of Cervical Cytopathology Tests in the Public Service in Minas Gerais, Brazil

Objective The objective of this study is to assess the performance of cytopathology laboratories providing services to the Brazilian Unified Health System (Sistema Único de Saúde - SUS) in the State of Minas Gerais, Brazil. Methods This descriptive study uses data obtained from the Cervical Cancer Information System from January to December 2012. Three quality indicators were analyzed to assess the quality of cervical cytopathology tests: positivity index, percentage of atypical squamous cells (ASCs) in abnormal tests, and percentage of tests compatiblewith high-grade squamous intraepithelial lesions (HSILs). Laboratories were classified according to their production scale in tests per year≤5,000; from 5,001 to 10,000; from 10,001 to 15,000; and 15,001. Based on the collection of variables and the classification of laboratories according to production scale, we created and analyzed a database using Microsoft Office Excel 97-2003. Results In the Brazilian state of Minas Gerais, 146 laboratories provided services to the SUS in 2012 by performing a total of 1,277,018 cervical cytopathology tests. Half of these laboratories had production scales≤5,000 tests/year and accounted for 13.1% of all tests performed in the entire state; in turn, 13.7% of these laboratories presented production scales of > 15,001 tests/year and accounted for 49.2% of the total of tests performed in the entire state. The positivity indexes of most laboratories providing services to the SUS in 2012, regardless of production scale, were below or well below recommended limits. Of the 20 laboratories that performed more than 15,001 tests per year, only three presented percentages of tests compatible with HSILs above the lower limit recommended by the Brazilian Ministry of Health. Conclusion The majority of laboratories providing services to the SUS in Minas Gerais presented quality indicators outside the range recommended by the Brazilian Ministry of Health.

Predictive Capability of HPV and Pap Tests in Screening for Cervical Cancer over a Three-Year Follow-up

Purpose To compare the predictive capability of HPV and Pap smear tests for screening pre-cancerous lesions of the cervix over a three-year follow-up, in a population of users of the Brazilian National Health System (SUS). Methods This is a retrospective cohort study of 2,032 women with satisfactory results for Pap smear and HPV tests using second-generation hybrid capture,made in a previous study. We followed them for 36 months with data obtained from medical records, the Cervix Cancer Information System (SISCOLO), and the Mortality Information System (SIM). The outcome was a histological diagnosis of cervical intraepithelial neoplasia grade 2 or more advanced lesions (CIN2ş). We constructed progression curves of the baseline test results for the period, using the Kaplan-Meier method, and estimated sensitivity, specificity, positive and negative predictive value, and positive and negative likelihood ratios for each test. Results A total of 1,440 women had at least one test during follow-up. Progression curves of the baseline test results indicated differences in capability to detect CIN2ş (p < 0.001) with significantly greater capability when both tests were abnormal, followed by only a positive HPV test. The HPV test was more sensitive than the Pap smear (88.7% and 73.6%, respectively; p < 0.05) and had a better negative likelihood ratio (0.13 and 0.30, respectively). Specificity and positive likelihood ratio of the tests were similar. Conclusions These findings corroborate the importance of HPV test as a primary cervical cancer screening.

Uso do fixador esquelético externo Tipo II para osteossíntese de tibiotarso em galinhas da raça Plymouth Rock Branca: modelo experimental para uso em aves selvagens

Foi avaliada a eficiência do fixador esquelético externo Tipo II para o tratamento de fratura de tibiotarso em oito galinhas adultas da raça Plymouth Rock Branca. As aves foram pré-medicadas com sulfato de morfina e anestesiadas com halotano. Em seguida, foi realizada osteotomia na diáfise do tibiotarso esquerdo, por meio de serra oscilatória. Quatro pinos de Kirschner foram inseridos através das corticais ósseas, dois proximalmente e dois distalmente ao foco da fratura. Após a redução desta, as extremidades dos dois pinos proximais e distais foram torcidas em direção distal ou proximal, respectivamente, sendo os pinos conectados externamente por meio de duas barras de acrílico autopolimerizável, nas faces lateral e medial externa do membro. O retorno da plena capacidade de utilização do membro foi observado em 20,00±7,09 dias, e a cicatrização óssea, avaliada por exame radiográfico, ocorreu em 35,12±8,72 dias. Os resultados do experimento demonstraram que redução aberta e aplicação de fixador esquelético externo Tipo II é método efetivo para o tratamento de fraturas de tibiotarso em galinhas da raça Plymouth Rock Branca.

Bus bar aeolian vibration field tests

Large amplitude bus bar aeolian vibration may lead to post insulator damage. Different damping applications are used to decrease the risk of large amplitude aeolian vibration. In this paper the post insulator load caused by the bus bar aeolian vibration and the effect of damping methods are evaluated. The effects of three types of bus bar connectors and three types of primary structures are studied. Two actual damping devices, damping cable and their combinations are studied. The post insulator loads are studied with strain gage based custom made force sensors installed on the both ends of the post insulator and with the displacement sensor installed on the midpoint of the bus bar. The post insulator loads are calculated from the strain values and the damping properties are determined from the displacement history. The bus bar is deflected with a hanging weight. The weight is released and the bus bar is left to free damped vibration. Both actual bus bar vibration dampers RIBE and SBI were very effective against the aeolian vibration. Combining vibration damper with damping cable will increase the damping ratio but it may be unnecessary considering the extra effort. Bus bar connector type or primary structure have no effect on the vertical load. The bending moment at the post insulator with double sided bus bar connector is significantly higher than at the post insulator with single sided bus bar connector. No reliable conclusions about bus bar connector type effect can be done, but the roller bearing type or central bearing type connector may reduce the bending moment. The RHS steel frame as primary structure may increase the bending moment peak values since it is the least rigid primary structure type and it may start to vibrate as a response to the awakening force of the vibrating bus bar.

Dynamiikan simulointi poralaitteiden tuotekehityksessä

Diplomityö käsittelee kallioporalaitteen eliniän kuormitusten arviointiin tarkoitetun simulointimallin rakentamista. Työssä luotiin modulaarinen malli, jolla voidaan simuloida dynaamisesti esteen yliajo. Esteen yliajo on perinteinen tehdastesti uusien laitteiden prototyypeille. Sillä pyritään saamaan selville laitteen maksimikuormitustapaukset. Pintaporalaitteen simulointimalli tehtiin ADAMS-ohjelmistolla laitteen suunnittelussa tehtyjä CAD-malleja hyödyntäen. ADAMS-ohjelmistolla mallinnettiin laitteen yksinkertaistettu mekaniikka siten, että laite oli jaettu viiteen eri moduuliin. Runko ja telasto olivat omana osionaan. Puomi ja syöttölaite oli oma kokoonpanonsa ja ohjaamo sekä katteet olivat kaksi erillistä modulia. Viides moduuli oli hydrauliikka, joka simuloitiin rinnakkaissimulointina EASY5-ohjelmistolla. Simuloituja esteen yliajon tuloksia verrattiin prototyyppilaitteen tehdastestien mitattuihin kuormituksiin. Vertailu tehtiin mallinnettujen neljän sylinterin paineita tarkastelemalla. Tuloksia tarkastellessa havaittiin, että simulaatiomalli antaa varsinkin staattisissa tarkasteluissa oikean suuntaisia tuloksia. Dynaamisissa tilanteissa koneen maksimikuormituksilla mallinnustarkkuus ei tämän työn laajuudessa ole riittävä varsinaiseen eliniän analysointiin. Sen sijaan mallinnustekniikka todettiin periaatteessa toimivaksi ja jatkokehityskelpoiseksi.

Reaching influential early adopters effectively in Finland : Rock Science – new generation board game

Innovations diffuse at different speed among the members of a social system through various communication channels. The group of early adopters can be seen as the most influential reference group for majority of people to base their innovation adoption decisions on. Thus, the early adopters can often accelerate the diffusion of innovations. The purpose of this research is to discover means of diffusion for an innovative product in Finnish market through the influential early adopters in respect to the characteristics of the case product. The purpose of the research can be achieved through the following sub objectives:  Who are the potential early adopters for the case product and why?  How the potential early adopters of the case product should be communicated with?  What would be the expectations, preferences, and experiences of the early adopters of the case product? The case product examined in this research is a new board game called Rock Science which is considered to be incremental innovation bringing board gaming and hard rock music together in a new way. The research was conducted in two different parts using both qualitative and quantitative research methods. This mixed method research began with expert interviews of six music industry experts. The information gathered from the interviews enabled researcher to compose the questionnaire for the quantitative part of the study. Internet survey that was sent out resulted with a sample of 97 responses from the targeted population. The key findings of the study suggest that (1) the potential early adopters for the case product are more likely to be young adults from the capital city area with great interest in rock music, (2) the early adopters can be reached effectively through credible online sources of information, and (3) the respondents overall product feedback is highly positive, except in the case of quality-price ratio of the product. This research indicates that more effective diffusion of Rock Science board game in Finland can be reached through (1) strategic alliances with music industry and media partnerships, (2) pricing adjustments, (3) use of supporting game formats, and (4) innovative use of various social media channels.

Rock outcrop vegetation in Brazil: a brief overview

This paper overviews the special issue of the Brazilian Journal of Botany dedicated to "Rock outcrop vegetation in Brazil". The main topics covered by this issue are phytogeography and vegetation ecology, plant life on shallow soils, plant reproduction and auto-ecology, morpho-physiology and plant adaptation, and finally conservation and global change. This collection of studies, in addition to other recent publications on Brazilian rocky outcrop vegetation, show that measurements of most of the relevant ecological and evolutionary parameters are under way and that scientific attention is now given to most Brazilian regions. However, there are still several gaps to be bridged: 1) inselbergs and high mountains in the Amazon and the Brazilian northeast, in particular, are still largely unknown to science; 2) long-term studies are almost totally unavailable, which hinders global change monitoring and assessment; 3) national and international networking are urgently needed to speed up scientific production about such habitats.

Soils associated with rock outcrops in the Brazilian mountain ranges Mantiqueira and Espinhaço

Espinhaço and Mantiqueira are two mountain ranges of great importance in Brazil. In the uppermost parts of these areas, unique ecosystems occur, generally associated with rock outcrops, they are collectively called High Altitude Rocky Complexes. These environments show distinct soil and biota characteristics in relation to the surrounding biome. The soils are generally shallow, coarse textured, with high Al3+ and varying amounts of organic matter. Entisols, Inceptsols and Histosols are dominant, directly associated with the rock outcrops, and forming a complex mosaic of soils. Some of these soils are endemic, based on peculiar conditions of parent materials, topography and vegetation, and this pedodiversity is important for detecting unique and endangered soils. In these soils, organic matter is highly humified, with a great amount of soluble forms and conspicuous presence of charcoal. Spodic horizons and dark water rivers are typically associated with quartzite and quartzite outcrops, formed by illuviation of organic compounds, being less common in granitic rocks. The very low nutrient content of these soils and other environmental limitations required the development of specific physiological and morphological plant adaptations. Most high altitude environments are unstable under current climatic conditions, and anthropic interventions may be accelerating this process. Detailed soil surveys are necessary for a better understanding of the role of these soils in ecological processes and for the development of adequate conservation policies.

Rock outcrop habitats in the Venezuelan Guayana lowlands: their main vegetation types and floristic components

The Guayana Shield, located in north-eastern South America, consists of a highly complex and composite mosaic of landscape elements. Amongst these, inselbergs are very conspicuous, because of their peculiar shape and their unusual associated vegetation. Geologically, these rock outcrops are part of the underlying ancient igneous-metamorphic basement and occur mainly in the lowlands of the periphery of the shield. As azonal habitats, inselbergs harbour a highly specialized flora. The characteristic vegetation is composed of lithophytic and savanna-like plant communities, as well as low dry forests. As a whole, the vegetation of an inselberg may be interpreted as a mosaic of marginal habitats. Therefore a large number of taxa find suitable niches in a quite condensed space. Gradients of soil depth and water availability are the main factors determining the floristic composition. A preliminary floristic inventory of the Venezuelan inselberg flora comprises 614 vascular plant species. 24% of them are endemic to the Guayana region, 15% are endemic to inselbergs of the Guayana region. The distribution patterns of these latter, eco-endemic species allows to distinguish a northern and a southern inselberg district. The two districts overlap in the Átures area, in the surroundings of Puerto Ayacucho, where a true centre of endemism is located. The distinction into two districts is emphasised by different phytogeographic relations. The southern inselberg district shows connections to the "tepui" flora, whereas the northern district reveals phytogeographic relations to the Caribbean region as well as to the Brazilian Shield. Possible explanations for the floristic interchange across the equator are discussed.