Incorporação do resíduo de cascalho de perfuração de poços de petróleo em formulações cerâmicas

During its operations, the oil industry generates a lot of waste, including gravel from drilling. Control of environmental impacts caused by this waste represents a major challenge. Such impacts can be minimized when it is given an appropriate management by being properly treated and properly disposed or recycled. The properties of these materials can be greatly influenced when a waste is added to its composition. This work aims to study the incorporation of gravel waste oil-well drilling in the standard body for production of red ceramic from a ceramic industry in São Gonçalo do Amarante / RN. The success of the incorporation can minimize costs in the production of ceramic pieces and reduce the environmental impacts caused by waste. The raw materials used were collected, characterized, and formulated with the percentages of 0%, 20% and 40% by weight of substitution of residue were synthesized at temperatures of 900, 1.010 and 1.120 °C using 30 minute firing intervals, 1 hour and 30min and 2 hours and 30 minutes, based on a factorial design 2³. Samples were then subjected to the tests of Water Absorption, Linear Retraction Firing, Flexural Rupture Strength, Apparent Porosity and Apparent Specific mass and Scanning Electron Microscopy (SEM) of break section. The results showed that the use of the residue for the manufacture of the ceramic products is possible (tiles, bricks and massive hollow bricks) replacing the clay to 40%, meeting the requirements of the standard and the literature for the technological properties of the final product.

Distribuição de derivados de petróleo por redes de polidutos: uma abordagem através de algoritmos evolucionários híbridos para um problema triobjetivo

An important problem faced by the oil industry is to distribute multiple oil products through pipelines. Distribution is done in a network composed of refineries (source nodes), storage parks (intermediate nodes), and terminals (demand nodes) interconnected by a set of pipelines transporting oil and derivatives between adjacent areas. Constraints related to storage limits, delivery time, sources availability, sending and receiving limits, among others, must be satisfied. Some researchers deal with this problem under a discrete viewpoint in which the flow in the network is seen as batches sending. Usually, there is no separation device between batches of different products and the losses due to interfaces may be significant. Minimizing delivery time is a typical objective adopted by engineers when scheduling products sending in pipeline networks. However, costs incurred due to losses in interfaces cannot be disregarded. The cost also depends on pumping expenses, which are mostly due to the electricity cost. Since industrial electricity tariff varies over the day, pumping at different time periods have different cost. This work presents an experimental investigation of computational methods designed to deal with the problem of distributing oil derivatives in networks considering three minimization objectives simultaneously: delivery time, losses due to interfaces and electricity cost. The problem is NP-hard and is addressed with hybrid evolutionary algorithms. Hybridizations are mainly focused on Transgenetic Algorithms and classical multi-objective evolutionary algorithm architectures such as MOEA/D, NSGA2 and SPEA2. Three architectures named MOTA/D, NSTA and SPETA are applied to the problem. An experimental study compares the algorithms on thirty test cases. To analyse the results obtained with the algorithms Pareto-compliant quality indicators are used and the significance of the results evaluated with non-parametric statistical tests.

Influência da absorção de umidade no comportamento mecânico nos compósitos poliméricos híbridos Kevlar/vidro quando imerso em água do mar e petróleo

The polymer matrix composite materials are being used on a large scale in the most different industrial fields such as aerospace, automotive, oil, among others, since the industrial perspectives is currently working with materials which have a good mechanical performance at high service life and cost / benefit. Thus, the determination of the mechanical properties is indispensable for the characterization of waste resulting in greater expansion of this type of material. Thus, this work will be obtained three plates laminated with tereftálica polymeric matrix reinforced by a bidirectional woven E-glass and kevlar both industrially made, where the plates are manufactured by manual lamination process (hand lay-up), all laminates have five enhancement layers, the first hybrid laminate will consist of bidirectional woven E-glass fiber, kevlar fiber interspersed with layers, is formed by the second bidirectional woven kevlar fiber at the ends of the laminate (two layers), and in the center the glass fiber fabric (three layers), the third plate is composed of only the bidirectional woven E-glass fiber. Then were prepared specimens (CP) by standard, to determine the mechanical properties of tensile and bending in three points. After fabrication of the specimens, they were immersed in oil and seawater. After that, there was a comparison of the mechanical properties for the test condition in the dry state. Showing that there was a considerable increase in the properties studied because the effect of hybridization in laminates.

Estudo de viabilidade técnico-ambiental para implantação de parques eólicos: um estudo de caso em um fragmento do litoral setentrional do Rio Grande do Norte/Brasil

The use of energy from renewable sources is increasingly demanded by society, especially aeolian - whose raw material is wind. Investments in wind power have become significant in Brazil with emphasis on the Northeast and in particular the Rio Grande do Norte state. According to the Empresa de Pesquisa Energética (Energy Research Company) (2012 ) , investments in the state grew significantly since 2002 with a total accumulated power, by 2013, of approximately 3,400 MW . Even with the early experiences of exploitation of wind energy in 2002, it is still considered new and requires further study referring to the likely changes in the environment and society. In this case, it is of growing and urgent importance to deeply study the wind still in the survey phase of the project, ie , at the beginning of decision making on the most feasible to implement these parks site. Given the above, the question is: from a technical and environmental analysis, how to identify viable areas to install Aeolian parks, taking into account the factors of the environmental dynamics that are relevant to minimize the negative results to the environment and the society? Thus, this study conducted a study on technical and environmental feasibility, proposing a methodology of exploration of feasible wind farms in coastal areas. The study area was a fragment of the northern coast of Rio Grande do Norte and its natural landscape units were identified through the environmental characterization of the area, as well as it was elaborated the map of the land cover, restriction homes and urban areas and Permanent Preservation Areas - PPAs. The environmental fragility was subdivided in the fragility of the natural dynamic, mapped through relief, soils and geology of natural units, and the fragility of the ecosystem, originated by the land cover map. In addition to these maps, it was generated the wind resource for an area from a height of 50 and 100 meters. The intersection between the fragility maps, PPAs and Restriction of homes superimposed on maps of wind potential, provided the map of feasibility of Aeolian parks, resulting in the most favorable areas for its facilities in a technical and environmental point of view. From this study, the entrepreneur can evaluate whether or not to proceed with the studies in this area and especially decrease potential conflicts with society.

Análise da biorremediação de compostos monoaromáticos em água através da pseudomonas aeruginosa

The monoaromatic compounds are toxic substances present in petroleum derivades and used broadly in the chemical and petrochemical industries. Those compounds are continuously released into the environment, contaminating the soil and water sources, leading to the possible unfeasibility of those hydrous resources due to their highly carcinogenic and mutagenic potentiality, since even in low concentrations, the BTEX may cause serious health issues. Therefore, it is extremely important to develop and search for new methodologies that assist and enable the treatment of BTEX-contaminated matrix. The bioremediation consists on the utilization of microbial groups capable of degrading hydrocarbons, promoting mineralization, or in other words, the permanent destruction of residues, eliminating the risks of future contaminations. This work investigated the biodegradation kinetics of water-soluble monoaromatic compounds (benzene, toluene and ethylbenzene), based on the evaluation of its consummation by the Pseudomonas aeruginosa bacteria, for concentrations varying from 40 to 200 mg/L. To do so, the performances of Monod kinetic model for microbial growth were evaluated and the material balance equations for a batch operation were discretized and numerically solved by the fourth order Runge-Kutta method. The kinetic parameters obtained using the method of least squares as statistical criteria were coherent when compared to those obtained from the literature. They also showed that, the microorganism has greater affinity for ethylbenzene. That way, it was possible to observe that Monod model can predict the experimental data for the individual biodegradation of the BTEX substrates and it can be applied to the optimization of the biodegradation processes of toxic compounds for different types of bioreactors and for different operational conditions.

Análise da biorremediação de compostos monoaromáticos em água através da pseudomonas aeruginosa

The monoaromatic compounds are toxic substances present in petroleum derivades and used broadly in the chemical and petrochemical industries. Those compounds are continuously released into the environment, contaminating the soil and water sources, leading to the possible unfeasibility of those hydrous resources due to their highly carcinogenic and mutagenic potentiality, since even in low concentrations, the BTEX may cause serious health issues. Therefore, it is extremely important to develop and search for new methodologies that assist and enable the treatment of BTEX-contaminated matrix. The bioremediation consists on the utilization of microbial groups capable of degrading hydrocarbons, promoting mineralization, or in other words, the permanent destruction of residues, eliminating the risks of future contaminations. This work investigated the biodegradation kinetics of water-soluble monoaromatic compounds (benzene, toluene and ethylbenzene), based on the evaluation of its consummation by the Pseudomonas aeruginosa bacteria, for concentrations varying from 40 to 200 mg/L. To do so, the performances of Monod kinetic model for microbial growth were evaluated and the material balance equations for a batch operation were discretized and numerically solved by the fourth order Runge-Kutta method. The kinetic parameters obtained using the method of least squares as statistical criteria were coherent when compared to those obtained from the literature. They also showed that, the microorganism has greater affinity for ethylbenzene. That way, it was possible to observe that Monod model can predict the experimental data for the individual biodegradation of the BTEX substrates and it can be applied to the optimization of the biodegradation processes of toxic compounds for different types of bioreactors and for different operational conditions.

Remoção de fenol de efluentes aquosos utilizando floculação iônica

Oil exploration is one of the most important industrial activities of modern society. Despite its derivatives present numerous applications in industrial processes, there are many undesirable by-products during this process, one of them is water separated from oil, called water production, it is constituted by pollutants difficult to degrade. In addition, the high volume of generated water makes its treatment a major problem for oil industries. Among the major contaminants of such effluents are phenol and its derivatives, substances of difficult natural degradation, which due their toxicity must be removed by a treatment process before its final disposal. In order to facilitate the removal of phenol in wastedwater from oil industry, it was developed an extraction system by ionic flocculation with surfactant. The ionic flocculation relies on the reaction of carboxylate surfactant and calcium íons, yielding in an insoluble surfactant that under stirring, aggregates forming floc capable of attracting the organic matter by adsorption. In this work was used base soap as ionic surfactant in the flocculation process and evaluated phenol removal efficiency in relation to the following parameters: surfactant concentration, phenol, calcium and electrolytes, stirring speed, contact time, temperature and pH. The flocculation of the surfactant occurred in the effluent (initial phenol concentration = 100 ppm) reaching 65% of phenol removal to concentrations of 1300 ppm and calcium of 1000 ppm, respectively, at T = 35 °C, pH = 9.7, stirring rate = 100 rpm and contact time of 5 minutes. The permanence of the flocs in an aqueous medium promotes desorption of the phenol from the flake surface to the solution, reaching 90% of desorption at a time of 150 minutes, and the study of desorption kinetics showed that Lagergren model of pseudo-first order was adequate to describe the phenol desorption. These results shows that the process may configure a new alternative of treatment in regard the removal of phenol of aqueous effluent of oil industry.

Remoção de fenol de efluentes aquosos utilizando floculação iônica

Oil exploration is one of the most important industrial activities of modern society. Despite its derivatives present numerous applications in industrial processes, there are many undesirable by-products during this process, one of them is water separated from oil, called water production, it is constituted by pollutants difficult to degrade. In addition, the high volume of generated water makes its treatment a major problem for oil industries. Among the major contaminants of such effluents are phenol and its derivatives, substances of difficult natural degradation, which due their toxicity must be removed by a treatment process before its final disposal. In order to facilitate the removal of phenol in wastedwater from oil industry, it was developed an extraction system by ionic flocculation with surfactant. The ionic flocculation relies on the reaction of carboxylate surfactant and calcium íons, yielding in an insoluble surfactant that under stirring, aggregates forming floc capable of attracting the organic matter by adsorption. In this work was used base soap as ionic surfactant in the flocculation process and evaluated phenol removal efficiency in relation to the following parameters: surfactant concentration, phenol, calcium and electrolytes, stirring speed, contact time, temperature and pH. The flocculation of the surfactant occurred in the effluent (initial phenol concentration = 100 ppm) reaching 65% of phenol removal to concentrations of 1300 ppm and calcium of 1000 ppm, respectively, at T = 35 °C, pH = 9.7, stirring rate = 100 rpm and contact time of 5 minutes. The permanence of the flocs in an aqueous medium promotes desorption of the phenol from the flake surface to the solution, reaching 90% of desorption at a time of 150 minutes, and the study of desorption kinetics showed that Lagergren model of pseudo-first order was adequate to describe the phenol desorption. These results shows that the process may configure a new alternative of treatment in regard the removal of phenol of aqueous effluent of oil industry.

Atividade antiangiogênica da forma recombinante da proteína 21 de Trypanosoma cruzi

Chagas disease, caused by the parasite Trypanosoma cruzi, is the cause of Chronic chagasic cardiomyopathy (CCC). The prospection of innovative therapeutic agents against CCC is a major task. The recombinant form of 21 (rP21), a secreted T. cruzi protein involved in host cell invasion and on progression of chronic inflammatory processes have been studied as a potential novel therapeutic target. Our present work aimed to verify and investigate the impact of rP21 in the formation of blood vessels in vitro and in vivo. First, tEnd cells were treated with different concentrations of rP21 or bacterial extract and viability and cellular adhesion were evaluated by MTT and angiogenesis inhibition by Matrigel tube formation assay and murine model. To verify the proteolytic activity of rP21 on extracellular matrix (ECM) components, fibrinogen, matrigel and fibronectin was incubated with rP21 or not. In addition, we performed proliferation assays and cell cycle analysis. Furthermore, the accumulation and distribution of F-actin was determined by Phalloidin staining using ImageJ software. Finally, tEnd cells were incubated with rP21 and the mRNA levels were analyzed by real-time PCR. Our results showed that rP21 did not alter cell viability and adhesion, but strongly inhibited vessel formation in vitro and in vivo. Tube formation assay showed that angiogenesis inhibition was dependent of the CXCR4-rP21 binding. In addition to these results, we observed that the rP21 was able to inhibit cell proliferation and promoted a significant reduction in the number of 4n cells (G2/M phase). Moreover, we found that rP21 significantly increased F-actin levels and this protein was able to modulate expression of genes related to angiogenesis and actin cytoskeleton. However, rP21 showed no significant activity on the matrix components. In this sense, we conclude that the rP21-endothelial cells (ECs) interaction via CXCR4 promotes inhibition of vessel formation through a cascade of intracellular events, such as inhibition of ECs proliferation and modulation of the expression of molecules associated with angiogenic processes and actin cytoskeleton.

Análise da eficiência de contratos de serviços de elevada especificidade terceirizados pela petrobras

The definition of the boundaries of the firms is subject that has occupied the organizational theorists long ago, being the seminal work of Coase (1937) indicated as the trigger for one theoretical evolution, with emphasis on governance structures, which led to a modern theory of incomplete contracts. The Transaction Cost Economics (TCE) and Agency Theory arise within this evolution, being widely used in studies related to the theme. Empirically, data envelopment analysis (DEA) has established itself as a suitable tool for analysis of efficiency. Although TCE argues that specific assets must be internalized, recent studies outside the mainstream of theory show that, often, firms may decide, for various reasons, hire them on the market. Researches on transaction costs face with the unavailability of information and methodological difficulties in measuring their critical variables. There`s still the need for further methodological deepening. The theoretical framework includes classic works of TCE and Agency Theory, but also more recent works, outside the mainstream of TCE, which warn about the existence of strategies in use of specific assets that aren`t necessarily aligned with the classical ideas of TCE. The Brazilian oil industry is the focus of this thesis, that aimed to evaluate the efficiency of contracts involving high specificity service outsourced by Petrobras. In order to this, we made the categorization of outsourced services in terms of specificity, as well the description of services with higher specificity. Then, we verified the existence of relationship between the specificity of services and a number of variables, being found divergent results than those that are preached by the mainstream of TCE. Then, we designed a DEA model to analyze the efficiency in the use of onshore drilling rigs, identified among the services of highest specificity. The next step was the application of the model to evaluate the performance of drilling rigs contracts. Finally, we verified the existence of relationship between the efficiency of contracts and a number of variables, being found, again, results not consistent with the theory mainstream. Regarding to analyze of efficiency of drilling rigs contracts, the model developed is compatible with what is found in academic productions in efficiency of drilling rigs. The results on efficiency show a wide range of scores, with efficiencies ranging from 31.79% to 100%, being low the sample efficiency average. There is consonance between the model results and the practices adopted by Petrobras. The results strengthen the DEA as an important tool in studies of efficiency with possibility to use for analysis other types of contracts. In terms of theoretical findings, the results reinforce the arguments that there are situations in which the strategies of the organizations, in terms of use of assets and services of high specificity, do not necessarily follow what is recommended by the mainstream of TCE

Avaliação do impacto das condições de operação na qualidade do sinal : processamento de dados de reflexão sísmica de multicanal

Através do processamento de dados sísmicos convertem-se registos de campo em secções sísmicas com significado geológico, que revelam informações e ajudam a delinear as camadas geológicas do subsolo e identificar estruturas soterradas. Portanto, a interpretação dos dados sísmicos só é boa se o processamento também o for. Este trabalho é resultado de um estágio curricular na empresa de prospecção geofísica GeoSurveys, que consistiu principalmente em processar 18 linhas de dados de sísmica de reflexão multicanal de alta resolução adquiridas na ilha de Pulau Tekong em Singapura, que têm como finalidade investigação do solo da baia desta mesma ilha. Estes dados foram cedidos à GeoSurveys para fins académicos, caso em que se inclui esta dissertação. Para atingir os objectivos propostos que consistiam em avaliar o impacto das condições de operação na qualidade do sinal sísmico e interpretação das linhas, fez-se o processamento das linhas utilizando um fluxo processamento padrão utilizado na empresa, com recurso ao software Radex Pro. Este fluxo de processamento tem como mais-valia o método de correcções estáticas, o UHRS trim statics, além das técnicas habituais utilizadas para melhorar a resolução das secções sísmicas como é o caso da desconvolução, a atenuação de ruído através do stacking, correcções de NMO, e migração, entre outras técnicas. A interpretação das linhas sísmicas processadas foi feita no software Kingdom Suite (IHS), através da distinção da configuração interna dos reflectores em cada secção sísmica, estabelecendo deste modo as principais unidades sismo-estratigráficas e identificando as zonas de interface que delimitam os horizontes principais. Foi feito ainda um estudo geológico sumário da área de pesquisa e da evolução geodinâmica da região.

Desenvolvimento de um método para correção de curvas de desempenho em bombas centrífugas submersas operando com fluidos viscosos

Electrical Submersible Pump (ESP) is used as an artificial lift technique. However, pumping viscous oil is generally associated with low Reynolds number flows. This condition leads to a performance degradation respect to the performance expected from the regular operation with water that most of the centrifugal pumps are originally designed for. These issues are considered in this investigation through a numerical study of the flow in two different multistage, semi-axial type ESPs. This investigation is carried out numerically using a Computational Fluid Dynamics (CFD) package, where the transient RANS equations are solved numerically. The turbulence is modeled using the SST model. Head curves for several operating conditions are compared with manufacturer’s curves and experimental data for a three-stage ESP, showing good agreement for a wide range of fluid viscosities and rotational speeds. Dimensionless numbers (n, n, n e Re) are used to investigate performance degradation of the ESPs. In addition, flow phenomena through the impellers of the ESPs are investigated using flow field from numerical results. Results show that performance degradation is directly related to rotational Reynolds number, Re. In addition, it was verified that performance degradation occurs for constant normalized specific speedn, which shows that performance degradation occurs similarly for different centrifugal pumps. Moreover, experimental data and numerical results agreed with a correlation from literature between head and flow correction factors proposed by Stepanoff (1967). A definition of modified Reynolds number was proposed and relates the head correction factor to viscosity. A correlation between head correction factor and the modified Reynolds number was proposed, which agreed well with numerical and experimental data. Then, a method to predict performance degradation based on the previous correlations was proposed. This method was compared with others from literature. In general, results and conclusions from this work can also be useful to bring more information about the flow of highly viscous fluids in pumps, especially in semi-axial, multistage ESPs.

Análise da eficiência de contratos de serviços de elevada especificidade terceirizados pela petrobras

The definition of the boundaries of the firms is subject that has occupied the organizational theorists long ago, being the seminal work of Coase (1937) indicated as the trigger for one theoretical evolution, with emphasis on governance structures, which led to a modern theory of incomplete contracts. The Transaction Cost Economics (TCE) and Agency Theory arise within this evolution, being widely used in studies related to the theme. Empirically, data envelopment analysis (DEA) has established itself as a suitable tool for analysis of efficiency. Although TCE argues that specific assets must be internalized, recent studies outside the mainstream of theory show that, often, firms may decide, for various reasons, hire them on the market. Researches on transaction costs face with the unavailability of information and methodological difficulties in measuring their critical variables. There`s still the need for further methodological deepening. The theoretical framework includes classic works of TCE and Agency Theory, but also more recent works, outside the mainstream of TCE, which warn about the existence of strategies in use of specific assets that aren`t necessarily aligned with the classical ideas of TCE. The Brazilian oil industry is the focus of this thesis, that aimed to evaluate the efficiency of contracts involving high specificity service outsourced by Petrobras. In order to this, we made the categorization of outsourced services in terms of specificity, as well the description of services with higher specificity. Then, we verified the existence of relationship between the specificity of services and a number of variables, being found divergent results than those that are preached by the mainstream of TCE. Then, we designed a DEA model to analyze the efficiency in the use of onshore drilling rigs, identified among the services of highest specificity. The next step was the application of the model to evaluate the performance of drilling rigs contracts. Finally, we verified the existence of relationship between the efficiency of contracts and a number of variables, being found, again, results not consistent with the theory mainstream. Regarding to analyze of efficiency of drilling rigs contracts, the model developed is compatible with what is found in academic productions in efficiency of drilling rigs. The results on efficiency show a wide range of scores, with efficiencies ranging from 31.79% to 100%, being low the sample efficiency average. There is consonance between the model results and the practices adopted by Petrobras. The results strengthen the DEA as an important tool in studies of efficiency with possibility to use for analysis other types of contracts. In terms of theoretical findings, the results reinforce the arguments that there are situations in which the strategies of the organizations, in terms of use of assets and services of high specificity, do not necessarily follow what is recommended by the mainstream of TCE

Atividade antioxidante e antiproliferativa de extratos de folhas de Plukenetia volubilis L. (EUPHORBIACEAE)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Parâmetros citogenéticos de espécies comerciais de carangidae (perciformes), com vistas a sua empregabilidade na conservação biológica e piscicultura marinha

Worldwide, families Carangidae and Rachycentridae represent one of the groups most important commercial fish, used for food, and great potential for marine aquaculture. However, the genetic bases that can underpin the future cultivation of these species, cytogenetic between these aspects are very weak. The chromosomal patterns have provided basic data for the exploration of biotechnological processes aimed at handling chromosomal genetic improvement, such as induction of polyploidy, androgenesis and ginogenesis, as well as obtaining monosex stocks and interspecific hybridizations. This paper presents a comprehensive cytogenetic survey in 10 species, seven of the family Carangidae and the monotypic family Rachycentridae. Classical cytogenetic analysis and in situ mapping of multigene sequences were employed, and additionally for the genus Selene and morphotypes of Caranx lugubris, comparisons were made using geometric morphometrics. In general, conservative species exhibit a marked chromosome number (2n=48). Although present in large part, different karyotypic form, retain many characteristics typical of chromosomal Order Perciformes, the high number of elements monobrachyal, Ag-NORs/18S rDNA sites and heterochromatin simply reduced, preferably centromeric. The main mechanisms involved in karyotypic diversification are the pericentric inversions, with secondary action of centric fusions. In addition to physical mapping and chromosome detail for the species are presented and discussed patterns of intra-and interspecific diversity, cytotaxonomic markers. This data set provides a better understanding of these patterns caryoevolutyonary groups and conditions for the development of protocols based on Biotechnology for chromosomal manipulation Atlantic these species